Rezkalni stroj - univerzalni

Stankoimport 6H80

Stanje: novo, TC 205 x 1000 CVS Exhibition machine, color blue Technical Data: Swing over bed: 410 mm Centre height: 205 mm Swing over cross slide: 234 mm Swing in gap: 610 mm Bed width: 280 mm Between centers: 1000 mm Number of spindle speeds: 8 Speed range: 80 - 2000 rpm Spindle bore: 58 mm Spindle nose: D1-6 Camlock Spindle taper: MT 6 Tailstock quill travel: 130 mm Tailstock taper: MT 4 Max. tool size: 22 mm Cross slide travel: 225 mm Top slide travel: 130 mm Thread cutting imperial: 2 - 72 T.P.I Thread cutting metric: 0.2 - 14 mm Thread D.P.: 4 - 44 D.P. Thread module: 0.3 - 7 MOD Longitudinal feed: (24) 0.035 - 0.5 mm/rev metric (24) 0.0014 - 0.020 inch Cross feed: (24) 0.017 - 0.250 mm/rev metric (24) 0.0007 - 0.0100 inch Main motor power: 3.75 kW Coolant pump: 0.10 kW Weight, approx.: 1650 kg Equipment: - CSS for constant cutting speed - Flange - Fixed steady rest - Splashguard rear panel - 4-way tool post - Foot brake - Emergency stop switch - Coolant system - Chip tray - Fixed centre Tedsvzmtzopfx Altsa - Change gear set - Reducing bush for main spindle - Machine pads - Service tools - Operating manual

Stanje: dober (rabljeno), Leto izdelave: 1956, Heavy-duty lathe, lathe, engine lathe, geared head lathe, screw-cutting lathe - Manufacturer: Weisser, Geared Head Lathe Type PF200 - Turning length: 1340 mm - Swing over bed: 420 mm - Swing over cross slide: 240 mm - Spindle bore: Ø 41 mm - Spindle speeds: 31.5 - 1400 rpm - Three-jaw chuck: Röhm Ø 250 mm - Accessories: included, see photos - Tailstock taper: MT4 - Drive motor: 2.5/3.5 kW - Dimensions: 2670/1000/H1230 mm - Weight: 1450 kg Todpfxotzf N Rj Altja

Stanje: zelo dobro (rabljeno), Krmiljenje: Heidenhain Positip 850; Vpenjalni sistem orodja: SK 40; Tedpfolkgvbex Altja Hidravlično vpenjanje orodja; Hod pinole: 100 mm; Miza: 800x480 mm; Pomiki: x-600 mm, y-400 mm, z-400 mm; Hitri pomiki; Podajalne hitrosti: 63-800 mm/min (18 stopenj); Število obratov: 63-3150 vrt/min (18 stopenj); Dodatki: Hladilna naprava, vpenjalna glava za vpenjalne tule, vključno s tulemi, utorni glavi.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, vrsta upravljanja: NC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: hidravlični, proizvajalec krmilnikov: SIEMENS, model krmilnika: PLC, število valjev: 4, premer spodnjega valja: 150 mm, premer zgornjega valja: 150 mm, premer stranskega valja: 140 mm, premer valja: 150 mm, dolžina valja: 2.050 mm, delovna širina: 2.000 mm, nastavitev višine valja: 18 mm, delovna višina: 800 mm, najv. debelina pločevine: 6 mm, najv. debelina jeklene pločevine: 6 mm, maks. debelina pločevine iz nerjavečega jekla: 4 mm, maks. debelina aluminijaste pločevine: 6 mm, maks. debelina medeninaste pločevine: 6 mm, najv. debelina bakrene pločevine: 6 mm, skupna masa: 2.800 kg, skupna dolžina: 3.800 mm, skupna širina: 1.200 mm, skupna višina: 1.100 mm, moč: 3 kW (4,08 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, število digitalnih zaslonov: 4, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nujno zaustavitev, 4-VALJČNA KRIVILNA STROJKA NC HIDRAVLIČNA MODEL 2000X6 MM / 4 MM ZA PREDKRIVLJENJE PROGRAMIRLJIVO AVTOMATSKO VALJANJE – NC KRMILNIK 4 OSI Kapaciteta: - Širina pločevine: 2000 mm - Debelina valjanja: 6 mm - Predkrivljenje: 4 mm Minimalni premer valjanja: D = 180 mm (odvisno od debeline in trdnosti pločevine) Dolžina valjev: 2050 mm Premer zgornjega valja: 150 mm Premer spodnjih valjev: 150 mm Kaljeni valji s površinsko utrditvijo in gladko površinsko obdelavo, primerni za valjanje pločevin iz nerjavnega jekla. Priprava za stožčasto valjanje pločevin. Električni pogon centralnih valjev za vlečno upogibanje pločevine. Pred-obremenitev je prilagodljiva glede na debelino in trdnost pločevine. Električna konzola z gumbi in digitalnim prikazom pozicije 4 valjev na ekranu. NC programabilno krmiljenje 4 osi omogoča samodejno valjanje ter shranjevanje do 200 programov v pomnilnik. Tsdjw Hpzwopfx Altea Hidravlična odprtina na sprednji strani za odstranjevanje zvitih tulcev. Hitrost delovanja je nastavljiva (počasno/hitro). Vgrajen varnostni sistem z gumbom za silo ustavitev. Navodila za uporabo in servisiranje priložena. Tlorisne mere (mm): 3800 x 1200 x V1100 Teža: 2800 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 350 mm, pomik po osi Z: 120 mm, pomik osi W: 450 mm, For sale: Hauser S35-400 Coordinate Grinding Machine The machine is in excellent condition and was partially overhauled for €15,000 in 2024. It comes equipped with 6 high-quality grinding spindles, a face spindle, and turbine spindles. TECHNICAL DATA Distance between column and spindle: 365 mm Clearance between table and spindle: 485 mm Main spindle diameter: 100 mm X-axis travel: 500 mm Y-axis travel: 350 mm Z-axis travel: 120 mm W-axis travel: 450 mm Tsdewtqthspfx Altoa U-axis travel: 5.5 mm Taper grinding: max. 16° Table size: 600 x 380 mm T-slots: 6 pcs, 10 mm width, 50 mm spacing Table load: 300 kg Speeds and Tool Holders Speed 22S: 4,500 - 22,500 rpm 45S/45ST: E19 Speed 45S/45ST: 9,000 - 45,000 rpm 80S: F6 Speed 80S: 40,000 - 80,000 rpm T10/T16: Ø 3 mm Speed T10/T16: 100,000 / 160,000 rpm Slot grinding attachment: 2,900 - 34,500 rpm Planetary movement: 5 - 250 rpm C-axis: 0 - 5 rpm Feed rate X/Y: 0 - 1,200 mm/min Feed rate W-axis: 900 mm/min Feed rate Z-axis: 0.5 - 12,000 mm/min MACHINE DETAILS Digital measuring accuracy: 0.001 mm Basic deviation: 0.003 mm Power: 7.5 kW Compressed air requirement: 20 m³ Operating pressure: 5 bar Footprint: 3.5 x 4.4 m Machine height: 3.5 m Connected load: 8.3 kVA Weight: 3.1 t EQUIPMENT - Slot grinding attachment - Rotary table, 300 mm diameter - Tilting table, 200 mm diameter - Coolant system - Extraction unit - Premium accessories included Transport and loading can be arranged throughout Europe at extra cost, upon request. All prices are subject to VAT. Viewing by appointment only. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality and cost-effective metalworking machine for your production? Or would you like to sell yours? For further information or contact details, please visit our website.

Stanje: zelo dobro (rabljeno), SK 50 tool holders (28627) various manufacturers: Tjdpfx Alewl U Tcjtoa - Bilz - Kelch - Sandvik - Clarkson Approx. 90 pieces

Leto izdelave: 1967, stanje: dober (rabljeno), številka stroja/vozila: 7011/C, Table clamping surface: 310 x 1400 mm Table travel (X-axis): approx. 950 mm Table travel (Y-axis): 325/345 mm Table travel (Z-axis): approx. 500 mm Spindle speeds: 20 - 1500 rpm Feeds, longitudinal and cross: 18 - 620 mm/min Feeds, vertical: 18 - 620 mm/min Electrical connection: 380 V, kW Required space: 1900 x 1600 x 1750 mm Todpfx Aljd Rxw Hjtea Weight: approx. 1500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, številka stroja/vozila: 30216 & 30277, dolžina podajanja os X: 1.000 mm, potovalna razdalja osi X: 1.000 mm, Univerzalni rezkalni stroj za kov Proizvajalec: MAHO Tedpfxop S Sche Altsa Model: MH 1000 Na voljo 2 kosa! x-hod 1000 mm Vpenjalna glava SK 40 Digitalni prikaz. Glava nagibna +/-. Miza nagibna in vrtljiva +/-. Pomik pinole. - 3-osni digitalni prikaz - Univerzalna miza 1.250 x 740 mm (T-utori 16 mm) - Vertikalna rezkalna glava SK 40 z navojem S 20 x 2 - 6 avtomatskih pomikov pinole 0,02/0,03/0,05/0,08/0,12/0,20 mm/obrat - Centralno mazanje, ročni pogon Stroj je mogoče ogledati. Takoj pripravljen za uporabo. Prosto naloženo, prevoz ni problem.

Stanje: rabljeno, Težki stružnica Craven 2000 mm x 8000 mm Premer nad posteljo: 2000 mm Tsdpjx Hp Iwjfx Altsa Premer nad sani: 1500 mm Razdalja med konicama: 8000 mm Glavni pogon: 60 kW Nosilnost: 40 ton Hitrosti vretena: 2 – 152 vrt/min Podporniki Podaljšek postelje: 2000 mm

Stanje: novo, Leto izdelave: 2025, x-travel 580 mm y-travel 200 mm z-travel 340 mm Spindle speeds 115 - 1750 rpm Table area 1000 x 240 mm Tool holder ISO 40 Total power requirement 4.5 kW Machine weight approx. 820 kg Space requirement approx. 1290 x 1090 x 2170 mm Universal precision drilling and milling machine for horizontal and vertical milling operations with digital 3-axis position display DPA 31 Plus Description: - Heavy-duty, robust construction made from high-quality, vibration-absorbing cast iron - Oil-bath gearbox with ground and hardened gears - Coolant system - Halogen machine lamp with focused beam - Large, heavy-duty cross table, precision-machined surface with T-slots and adjustable gibs - Milling head tiltable ±45° - Clockwise/anticlockwise rotation - X-axis traverse optionally via handwheel or table feed unit - Automatic end-stop on the X-axis - Height-adjustable safety shield with microswitch to protect user from flying chips and parts for maximum safety Scope of delivery: - Keyed drill chuck 1 - 16 mm / B18 - Mounting arbor for drill chuck ISO40 / B18 - Horizontal milling spindle with counter bearing, for side and slab cutters Ø22 mm, Ø27 mm - Adapter ISO 40/MK3 - Adapter ISO 40/MK2 - Drawbar for vertical and horizontal use - T-slot nuts - Drift Todpfstv Riajx Altsa - Operating tools