Berg Und Schmid nakup rabljenega (134)

Stanje: novo, Cutting range at 90°: round 255 mm Cutting range at 90°: square 240 mm Cutting range at 90°: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 870 mm Band speed: 18 – 110 m/min Klsdpjd Iip Ajfx Af Nel Total power requirement: 1.5/1.8 kW Machine weight approx. 0.63 t Space requirements approx. 1.8 x 1.85 x 1.85 m Mitre Band Saw, Fully Automatic GBS 250 Super VA-I MPS - Mitre left 45° in automatic mode - Mitre left 60° in semi-automatic mode (cuts without programming) - Impact-resistant and ergonomic control panel with oil-resistant EPDM cover - Material height sensor (automatic cutting start detection) - One-piece cast frame and gearbox for extremely quiet and low-vibration operation - Removable chip tray (easy cleaning/disinfection) - Excellent accessibility to saw, material, and feed unit - Hinged safety cover - Fine adjustment for feed rate - Semi-automatic cutting! Automatic sawing with microprocessor control Selectable for 2 programmable levels Semi-automatic operation Fully automatic operation Start cycle after input of desired quantity and material length: material approach, cutting, and piece counting until program fulfillment - MPS control system for input of required number of feed cycles - All essential machine data displayed on the LED display during the cutting process (current draw, cutting time, piece count) - Entered data is retained in RAM memory - The self-diagnostic circuit automatically displays any irregularities as error messages and monitors the entire process - Floating feed unit - Length adjustment using handwheel and vernier scale with mechanical position display. Adjustable for cut lengths from 2.5 mm to 420 mm or, using the reversing automatic, 1–29 repetitions, remnant length 210 mm

Stanje: novo, Cutting diameter round: 330 mm Kljdpjfb Nbgefx Af Nel Cutting diameter square: 330 mm Cutting diameter flat: 400x330 mm Saw band length: 4570 x 34 x 1.1 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight approx. 2.35 t Dimensions (L x W x H): 2.23 x 2.15 x 1.8 m SPECIAL OFFER PRICE!!!! 2-column high-performance automatic band saws of the SBS series The SBS series impresses with advanced engineering, high quality, durability, and an unrivaled comprehensive standard equipment package. - Modern SNC 20 controller for CNC models - Frequency-controlled saw drive - Control buttons with pictograms - Work light - Powered chip brush - Hydraulic blade tensioning - Clamping pressure regulation - Double vice (in front of and behind the band) - Inch mode for positioning - Bundle clamping, pre-configured electrically and hydraulically - Chip conveyor The SNC 20 controller enables user-friendly and straightforward input of up to 20 different sawing tasks (length and quantity). When entering the desired measurement, the controller automatically calculates the saw cut allowance and the number of feed strokes. Additionally, the error code display system provides rapid fault analysis for troubleshooting.

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350x200 mm Saw band length 3375x27x0.9 mm Band speed 18 - 100 m/min Table height 880 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.84 t Space requirement approx. 1.85 x 1.9 x 2.0 m Fully automatic mitre band saw • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • One-piece cast frame and gearbox, extremely quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Shock-resistant and ergonomic control panel with oil-resistant EPDM cover • Excellent accessibility to saw, material, and feed unit • Folding safety cover • Fine feed adjustment • Semi-automatic cut! • Optimize workflow with CNC control Parameters such as quantity and material lengths can be entered, with automatic kerf compensation • CNC control for 10 different sawing programs with 99 subprograms for various lengths and quantities, e.g. one cutting program with various section lengths • Automatic feed unit (CNC) via ball screw incremental feed with automatic length compensation. Adjustable for cut-off lengths from 2 mm to 9,999 mm, remnant length 170 mm. Included: - Micro-spray unit Kljdpfsupw R Asx Af Nol - Leveling elements

Stanje: novo, Cutting diameter round: 310 mm Cutting diameter square: 310 mm Cutting diameter flat: 340 x 310 mm Saw band length: 3730 x 34 x 1.1 mm Table height: 922 mm Band speed: 15 – 100 m/min Total power requirement: 3.0 kW Machine weight: approx. 1.65 t Dimensions (L x W x H): 1950 x 1755 mm 2-Column Bandsaw X-Smart 3 • Modern CNC control, freely programmable for multiple sawing jobs with various cutting lengths and quantities Kedovn Uy Aopfx Af Nsll • Inclined saw frame design for maximum bandsaw blade service life • 2-column structure with linear guides on both sides • Linear-guided sensor for automatic cutting height detection • Hydraulic clamping pressure reduction (option) for thin-walled tubes and profiles • Hydraulic cutting pressure regulation for maximum cutting performance • Material feed carriage in bridge construction for optimal transport/feed and clamping of the material • Feed unit with precision ball screw drive • Double vise system before and after the saw band • Electrically driven chip conveyor • Cleaning gun for easy cleaning of the unit • Full enclosure with easy access for maintenance and cleaning • LED work light • Minimum remaining workpiece length 50 mm • Bundle clamping device (option)

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350 x 200 mm Saw band dimensions: 3375 x 27 x 0.9 mm Band speed: 18 – 110 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.61 t Space requirement: approx. 1.5 x 1.75 x 1.9 m Double-mitre metal bandsaw with AutoCut function Klsdpfx Ajnq Sanef Nel - Mitre cuts up to 60° left and 45° right - Ball-bearing rotary table - Side-adjustable clamping vice - Heavy-duty, large material support - Automatic coolant system Image shows semi-automatic version.

Stanje: novo, Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 210 mm Cutting capacity at 90° (rectangular): 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 - 90 m/min Total power requirement: 1.1/1.3 kW Machine weight: approx. 0.35 t Space requirement: approx. 1.3 x 0.8 x 1.5 m SPECIAL PRICE!!! Double miter metal band saw Hydraulic semi-automatic with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Cutting pressure and feed rate regulator - Blade speed 25 - 90 m/min Klsdpfx Afjfgyh So Nel - Miter cuts up to 60° left and 45° right - Patented, ball-bearing rotary table for easy miter adjustment - Movable quick-release vice - Quick-release lever - Automatic cooling system

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Kjdpfxefg E Hpj Af Njll Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: novo, Cutting diameter round: 550 mm Cutting diameter square: 550 mm Cutting diameter flat: 550 x 550 mm Saw blade length: 5980 x 41 x 1.3 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight approx. 3.8 t Dimensions L x W x H: 3.0 x 2.15 x 2.2 m SPECIAL PRICE!!!! 2-column high-performance band saw machines of the SBS series The SBS series stands out thanks to advanced technology, high quality, durability, and an unrivalled, extensively equipped standard specification. - Modern SNC 20 control system for CNC models - Frequency-controlled saw drive - Operation buttons with pictograms - Work light - Driven chip brush - Hydraulic blade tensioning Ksdsfg E Hwepfx Af Nell - Clamping pressure regulation - Double vice (in front of and behind the blade) - Creep mode for positioning - Bundle clamping prepared for electric and hydraulic operation - Chip conveyor The SNC 20 control enables convenient and simple programming of up to 20 different sawing tasks (length and quantity). When entering the nominal dimension, the control system automatically calculates the cutting waste and number of feed strokes. Additionally, the error code display system allows for rapid troubleshooting and diagnostics.

Stanje: novo, Cutting capacity at 90°: round 310 mm Cutting capacity at 90°: square 280 mm Cutting capacity at 90°: rectangle 400 x 250 mm Saw blade length: 4020 x 34 x 1.1 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.68 t Space requirement: approx. 1.5 x 1.78 x 1.3 m Kledpfx Aed Iiptsf Njl SPECIAL OFFER PRICE!!! Double miter bandsaw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • Miter cut left 60° / right 45° • Heavy-duty industrial hydraulics, 18 bar • Optimal access to the workpiece • Ammeter for monitoring: - Cutting force optimization - Blade life - Cut accuracy • Hydraulic vice: automatic clamping and release • Swarf removal brush • Material turntable with ball bearings • Quick-release vice, movable • Height sensor for material (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Fast lowering to material, or for serial cuts, start cutting immediately 4. Saw blade stops 5. Raise saw frame slightly above material 6. Release vice

Stanje: novo, Cutting diameter: 185 mm Saw band length: 2,085 x 20 x 0.90 mm Table height: 920 mm Band speed: 35 + 70 m/min Ksdpfevn Uzaex Af Nell Connection voltage: 400 V Total power requirement: 0.8 kW Machine weight: approx. 200 kg Berg & Schmid – Metal Band Saw GBS 185 Eco AutoCut Extremely fast and smooth cutting thanks to improved drive technology - Mitre cuts up to 60° to the left - Suitable for dry and wet cutting - Coolant system - Machine base

Stanje: novo, Cutting range at 90 degrees: round 510 mm Cutting range at 90 degrees: square 480 mm Cutting range at 90 degrees: rectangular 610 x 450 mm Saw band length 5320 x 34 x 1.1 mm Band speed 15 - 100 m/min Table height 820 mm Total power requirement 3.0 kW Machine weight approx. 2.3 t Space requirement approx. 2.65 x 2.8 x 2.2 m For mitre cuts up to 45° to the left in fully automatic operation and up to 60° to the left in semi-automatic mode Kjdpfx Afjfu Nbbj Njll Material height sensor (automatic cut start recognition) Automatic feed unit with ball screw incremental feed and automatic length compensation Sensor on the saw blade for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Hydraulic unit with automatic pressure shut-off in idle mode Mechanical swarf removal brush Feed vice opens on both sides Minimum rest piece length 100 mm Modern, freely programmable CNC control for multiple sawing jobs with various cutting lengths and quantities Automatic feed unit 500 mm via ball screw incremental feed with automatic length compensation. Adjustable for cut lengths from 25 to 9,999 mm Fully hydraulic control of saw frame and clamping devices Pre-selection of 3 different material feed rates Visualization of the entire work process with simple data entry

Stanje: novo, Cutting capacity at 90°: round 105 mm Cutting capacity at 90°: square 100 mm Cutting capacity at 90°: rectangular 100 x 105 mm Saw band dimensions: 1335 x 13 x 0.65 mm Klodpofv Aq Refx Af Nel Dimensions (L x W x H): 650 x 310 x 300 mm Band speed: 30 - 80 m/min Total power requirement: 0.95 kW Machine weight: approx. 18 kg Special Offer Price!! Berg & Schmid - Portable Band Saw PBS 90 ESC High-performance and particularly robust metal band saw with aluminum die-cast saw table and stepless cutting speed for mitre cuts up to 60° Shipping cost share: 25 EUR Images show identical PBS 110 model.

Stanje: novo, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650x450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL PRICE!!! 2-Column Double Mitre Band Saw K-tech DG 62/45 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to angled cutting, feed control, and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for easy cleaning/disinfection) • Energy-efficient and low-vibration due to angled cutting • Ergonomic, safe, and free-standing control panel • Frequency-controlled blade drive 15-100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Oversized drive wheels (520 mm each) • Clear mitre adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid approach down to start of material, or commence series cutting 4. Switch off saw blade Kjdpfxod Iipme Af Nsll 5. Raise frame just above the material 6. Vise opens

Stanje: novo, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangular 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 / 70 m/min Total power requirement: 1.1/1.3 kW Machine weight approx. 0.35 t Required space approx. 1.3 x 0.8 x 1.5 m SPECIAL OFFER PRICE!!! Double mitre metal bandsaw, hydraulic semi-automatic, equipped with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Adjustable cutting pressure feed regulator - Band speed 34 / 74 m/min - Mitre cuts up to 60° left and 45° right - Patented ball-bearing turntable for easy mitre adjustment - Rapid-action vice, movable - Quick-release lever - Automatic coolant system Kledpfx Aod Iip Rof Nol Shipping cost share: 120 EUR

Stanje: novo, Cutting range at 90°: round 255 mm Cutting range at 90°: square 240 mm Cutting range at 90°: rectangle 300 x 180 mm Saw band length 2,765 x 27 x 0.9 mm Table height 870 mm Blade speed 18 - 110 m/min Control CNC Total power requirement 1.5/1.8 kW Machine weight approx. 0.63 t Space requirement approx. 1.8 x 1.85 x 1.85 m Kljdpfxed Iipze Af Njl Mitre Band Saw, Fully Automatic GBS 255 Super VA-I CNC • Left mitre 45° automatic operation • Left mitre 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • One-piece cast frame and gearbox, very quiet cutting, and low vibration • Removable chip tray (for cleaning/disinfection) • Shock-proof and ergonomic control panel with oil-resistant EPDM cover • High-performance positioning with incremental encoder (CNC) • Excellent accessibility to saw, material, and feed unit • Hinged safety cover • Fine feed adjustment • Semi-automatic cut function • CNC control for process optimization: input of various parameters such as quantities and material lengths, automatic deduction of kerf width • CNC control for 10 different sawing programs with 99 subprograms for various lengths and quantities, e.g., one sawing program with various cutting lengths • Automatic feed unit (CNC) via ball screw with incremental feed and automatic length compensation. Adjustable for cutting lengths from 2 mm to 9,999 mm, remnant piece length 170 mm.

Stanje: novo, Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 210 mm Cutting capacity at 90° (rectangular): 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 – 90 m/min Total power requirement: 1.1 / 1.3 kW Kledpfxofgyh Re Af Nsl Machine weight: approx. 0.35 t Required space: approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTIONAL PRICE!!! (20347) Double miter metal band saw featuring: - Blade speed: 25 – 90 m/min - Miter cuts up to 60° left and 45° right - Ball-bearing turntable for quick miter adjustment - Sliding quick-release vise - Quick-clamping lever - Automatic coolant system

Stanje: novo, Cutting capacity at 90 degrees: round 680 mm Kjdpfx Afjfgyifs Nell Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangle 820 x 610 mm Saw band length: 5850 x 41 x 1.3 mm Band speed: 15 - 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.45 t Space requirement: approx. 5.85 x 3.6 x 2.7 m 2-column bandsaw for fast cutting, K-tech 800H with pusher system P 15, P 30 (optional), Fast, smooth, and ergonomic cutting Specially developed for cutting profiles, beams, and solid materials. Material is clamped vertically on both the infeed and outfeed sides. From K-tech 800 H onwards, the machine comes standard with an additional horizontal clamping vise. The interaction of hydraulic saw frame lowering, material positioning, and the pusher system is CNC controlled. The machines come standard with the environmentally friendly B&S Clean Cut cutting system featuring minimal quantity lubrication. This reduces cleaning effort and conserves resources. CNC Control A CNC control system allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitres. The B&S pusher system—an infeed and positioning system—is equipped with 'double-sided opening grippers' that are hydraulically controlled. This ensures secure gripping and transport of materials and bundles that may deviate slightly from the ideal shape. The pusher system is mounted separately and guided by ball-bearing linear guides, a ground rack, and a robust, frequency-controlled geared motor.

Stanje: novo, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.61 t Required space: approx. 1.5 x 1.75 x 1.9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table - Vise laterally adjustable - Solid, large material support - Automatic cooling Illustration shows semi-automatic version. Kjdpfx Afsfd Abae Nsll

Stanje: novo,

Stanje: rabljeno, Leto izdelave: 1999, številka stroja/vozila: 012563001, največja hitrost vrtenja: 3.600 obr/min, vhodna napetost: 400 V, For cutting aluminium profiles with miter cuts Year of manufacture: 1999 Advance payment Transport costs not included Ksdswl Uzyepfx Af Nsll

Stanje: dober (rabljeno), Leto izdelave: 2002, številka stroja/vozila: 022885001, Offer 24342 Technical Data: - Fully automatic saw with hydropneumatic feed and MPS control - Pre-programmable work cycles with infinitely variable speed regulation - Especially suitable for stainless steel cutting - Workpiece clamping in pneumatic machine vice - Saw blade diameter: 370 mm - Cutting speeds steplessly adjustable: 15 – 70 rpm - Mitre adjustment: right up to 45°, left up to 45° – 60° - Cutting capacity at 90°: round 130 mm, rectangle 180 x 100 mm, square 120 x 110 mm - Mitre cutting at 45°: round 130 mm, rectangle 120 x 100 mm Kljdst N Rk Nspfx Af Njl - Maximum opening width of pneumatic machine vice: 160 mm - Drive: 400 V / 3 kW - Pneumatic connection: 6 – 8 bar - Coolant equipment - Infeed roller conveyor: 1000 mm - Outfeed roller conveyor with stop and digital measuring device: 4000 mm - Required space approx.: W 7500 x H 2050 x D 1100 mm - Weight approx.: 1200 kg

Leto izdelave: 2007, Stanje: dober (rabljeno), številka stroja/vozila: 073759001, Offer 22489 Technical data: - Cutting range at 90° round 320 mm - flat 320 x 320 mm - Material feed automatic - Saw band dimensions 5095 x 34 x 1.1 mm - Cutting speed 10 to 120 m/min - Hydraulic lifting and lowering of the saw frame - Upper lift limitation for saw frame - Infinitely variable cutting pressure adjustment - Hydraulic material vise - Chip conveyor screw - Coolant system - Discharge roller table 2500 mm - Drive motor 400 V / 4.0 kW Ksdpoim Ildjfx Af Nsll - Required space approx. W 2500 x H 1950 x D 2000 mm - Weight approx. 2200 kg

Stanje: rabljeno, Mitre Cold Circular Saw BERG & SCHMID Type MKS 350 Year of manufacture: approx. 1980 Cutting capacity at 90° round: Ø 110 mm Cutting capacity at 90° rectangular: 160 x 90 mm Cutting capacity at 90° square: 95 x 95 mm Cutting capacity at 45° round: Ø 95 mm Cutting capacity at 45° rectangular: 120 x 90 mm Cutting capacity at 45° square: 80 x 80 mm Saw blade diameter max.: 350 mm Saw blade speed: 28 and 56 rpm Motor power: approx. 1.8 / 2.5 kW, pole-changeable Mains connection: 380 Volt, 50 Hz - Motor with 2 electrically selectable speeds - Stepless quick mitre adjustment up to 45° - Material vise with quick-action eccentric lever - Coolant device with electric coolant pump - Material stop: 350 mm - Saw blade with Ø 335 mm installed Floor space required (L x W x H): 1250 x 600 x 1200 mm Klsdpjquzd Rofx Af Njl Weight: 240 kg Good condition

Stanje: novo, Območje reza pri 90 stopinjah: okroglo 250 mm Območje reza pri 90 stopinjah: kvadratno 210 mm Območje reza pri 90 stopinjah: pravokotno 290 x 210 mm Dolžina žaginega traku 2.965 x 27 x 0,9 mm Višina mize 940 mm Hitrost traku 25 - 90 m/min Skupna potrebna moč 1,1/1,3 kW Teža stroja pribl. 0,35 t Prostorske zahteve pribl. 1,3 x 0,8 x 1,5 m RAZSTAVNI STROJ po posebni ceni!!! Dvostranska tračna žaga za kovino, polavtomatska z: - Hidravlično vpenjalo - Senzor višine materiala - Nadzor reza preko ampermetra - Regulator pritiska reza - Hitrost traku 25 - 90 m/min Klodpfexfwcdex Af Nol - Poševni rezi do 60° levo in 45° desno - Patentirana, kroglična vrtljiva miza za enostavno nastavitev kota - Hitro nastavljivo vpenjalo, pomično - Vzvod za hitro vpenjanje - Samodejno hlajenje

Stanje: novo, Cutting diameter round: 300 mm Cutting diameter square: 300 mm Cutting capacity flat: 300 x 260 mm Saw blade length: 3920 x 34 x 1.1 mm Table height: 780 mm Blade speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight: approx. 1.65 t Dimensions (L x W x H): 2.0 x 2.05 x 1.7 m Unused exhibition machine!!!! 2-column high-performance automatic bandsaw of the SBS series • Modern SNC 20 control in CNC configuration • Frequency-controlled saw drive • Work light • Powered chip brush • Hydraulic blade tension • Adjustable clamping pressure • Double vice (in front of and behind the blade) • Creep speed for positioning • Bundle clamping, electrically and hydraulically prepared Kjdpfxexfwbts Af Njll • Chip conveyor The SNC 20 control enables convenient and user-friendly input of up to 20 different sawing jobs (length and quantity). When the desired dimensions are entered, the control automatically calculates the cutting waste and the number of feed cycles. In addition, the error code display system allows for fast troubleshooting. Including band run-off detection (€1,800)