Tračna žaga - avtomatski - vodoravno

BERG & SCHMID SBS 330 VA-I / CNC

Stanje: novo, Leto izdelave: 2024, 600 kg load capacity Kdedpfog Tdpgex Af Teg Height-adjustable welding positioner with 100 mm through-hole Plate diameter: 700 mm Horizontal height: min. 0.65 m, max. 1.25 m Height when tilted: min. 0.45 m, max. 0.95 m Rotation speed: 0.01 – 1.3 rpm Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) Kdsdpfx Afjfgyico Teg * Clearly arranged selector switch with pictograms for intuitive operation

Leto izdelave: 2024, Stanje: novo, Machine was installed at the customer's site but was never commissioned—NEW and comes with full Breton warranty. Breton GENYA Switch – 5-axis CNC bridge saw with integrated suction system and tilting table. The Breton GENYA Switch is a state-of-the-art 5-axis CNC cutting system featuring a monolithic design for maximum precision, speed, and flexibility in stone processing. It combines automated cutting processes with an integrated vacuum suction system, enabling fully automated handling and positioning of slabs—ideal for kitchen countertops, architectural components, and complex cutting tasks. Highlights: - Monoblock construction – no foundation work required, quick commissioning - 5 interpolating axes – for complex geometries, angled cuts, and recessed pockets Kdjdpjwthlnofx Af Tjg - Suction system – automatic repositioning and optimized cutting sequence without operator intervention - Switching table – parallel setup during main operating time - Camera and CAD import functions – for efficient nesting processes and material yield optimization - Automatic tool changer with 10+2 tool positions - SPINDLE MOTOR ISO40, 8000 RPM - Handwheel - Blade alignment unit - Vein matching – perpetual license - Linear, fixed tool magazine ISO 40 with 10+2 tool storage slots - Saw blade head Ø400 mm with ISO 40 tool interface - Max. saw blade head Ø600 mm - Automatic lubrication system for GENYA - ISO 40 tool holder for milling cutters and drills - Thickness gauge - Camera system - Suction lifters up to 500 kg - Automatic table changer with tilting table Includes installation and training. Machine available at short notice.

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Kdjdpefg E Hpsfx Af Teg Price on request.

Stanje: dober (rabljeno), Leto izdelave: 1998, Premer mize 1800 mm Premer struženja 2060 mm Zunanji premer kroženja 2000 mm Delovna višina 1557 mm Pogonska moč – rezkalno vreteno 30 kW Teža obdelovanca 12 t Kdsdpfx Afow H Dkmj Tjg Pogon mize 100 kW 2-stopenjski menjalnik Pogon brusilnega vretena 30 kW Rezkalno vreteno SK50 z brusilnim vretenom

Stanje: dober (rabljeno), Leto izdelave: 1992, številka stroja/vozila: 5164, Offer 23148 Technical specifications: Kdsdpfxsq Evn Eo Af Tog - Equipped with hydraulic clamping and feed device - Cutting range: - Round: 320 mm - Square: 300 x 300 mm - Max. cut-off length per single stroke: up to 400 mm - Multiple feed up to 10 x 400 mm - Saw band dimensions: 3660 x 25 x 0.9 mm - Cutting speed infinitely variable: 20 – 100 rpm - Feed rate hydraulically adjustable, stepless - Coolant system - Material support height: 720 mm - Saw drive: 400 V / 2.5 kW - Installation dimensions (approx.): W 1950 x H 1250 x D 1500 mm - Weight (approx.): 1000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 850 mm, pomik po osi Z: 800 mm, hitro pomikanje X-os: 40 m/min, hitri pomik os Y: 40 m/min, hitri pomik na osi Z: 40 m/min, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 530i, širina mize: 870 mm, dolžina mize: 3.500 mm, obremenitev mize: 3.500 kg, premer vrtljive mize: 800 mm, skupna masa: 24.000 kg, hitrost vretena (min.): 60 obr/min, največja hitrost vretena: 12.000 obr/min, dovod hladilne tekočine: 20 letvica, moč vretenovega motorja: 22 W, nos vretena: ISO 40, število mest v zalogovniku orodij: 60, dolžina orodja: 300 mm, premer orodja: 76 mm, teža orodja: 8 g, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, Univerzalni rabljeni obdelovalni center s pomičnim stebrom, 5 osi, s CNC Heidenhain TNC-530, zasučna glava, integrirana vrtljiva miza. Kdsdpjxixn Nsfx Af Tsg

Stanje: novo, Leto izdelave: 2026, The EVP-RA 350 vibratory finishing machine by ERBA features an inclined process channel bottom with integrated separation. The machine is equipped with an easily replaceable screening unit and is distinguished by high operational efficiency thanks to an integrated drop zone. Unloading and separation are carried out via the integrated discharge flap (manual/pneumatic). Upon request, the machine can be fitted with a reinforced spring assembly and a more powerful motor for higher loads. The motor speed can be infinitely adjusted with a frequency converter (optional). Thanks to its side discharge outlet, the EVP-RA 350 can be linked with other machines. The system can be optionally equipped with a fully automatic PLC control. ERBA vibratory finishing systems are renowned for their durability and longevity, owed in part to the hot-cast polyurethane lining of the process channel. Technical specifications: - Gross volume: 385 liters - Channel width: 340 mm - Imbalance motor output: 2.2 kW Kdjdpon Ut Ursfx Af Tog - Speed: 1,400 rpm - Internal diameter of process channel: 1,200 mm All prices are net, plus the applicable statutory VAT and shipping costs. The images may show the machine with accessories, which are optionally available at additional cost. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). The offer is intended solely as an online presentation of our goods. Contract negotiations take place via telecommunications (email, telephone, messaging portal). In the first instance, we will provide you with a non-binding offer, which includes our general terms and conditions with legal notice and information on the right of withdrawal before any purchase/contract conclusion.

Stanje: dober (rabljeno), Technical Data: Working length: 2100 mm Maximum bending capacity: 10.0 mm Pre-bending: 8.0 mm Top roll diameter: 200 mm Bottom roll diameter: 180 mm Number of driven rolls: 3 Hydraulic drop-end bearing Cone bending device Extended rolls for section bending Control panel with digital display Motor power: 5.5 kW Kdedpfx Aewchn Uof Tjg CE marking Dimensions (L x W x H): approx. 3100 x 1150 x 1250 mm Weight: approx. 4 tons Accessories: Several sets of rolls for pipe and section rolling The seller is not liable for typographical or data transmission errors. The machine is in visual and technical condition, and wear consistent with its age; used machines are sold without any warranty.

Stanje: rabljeno, CNC multi-spindle automatic lathe INDEX MS 32 C Kdodpfx Afsuhaqbe Tsg