Berg & Schmid Tračna Žaga - Avtomatski - Vodoravno nakup rabljenega (7.882)

Stanje: novo, Cutting diameter round: 300 mm Cutting diameter square: 300 mm Cutting dimensions flat: 300 x 260 mm Saw band dimensions: 3920 x 34 x 1.1 mm Table height: 780 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight approx. 1.65 t Dimensions (L x W x H): 2.0 x 2.05 x 1.7 m SPECIAL PROMOTIONAL PRICE!!!! Nsdpsfb Nbfjfx Ah Uect 2-column high-performance bandsaw automats from the SBS series The SBS series impresses with sophisticated engineering, high quality, durability, and an unrivalled, comprehensive standard configuration. • Modern SNC 20 control system for CNC models • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic band tensioning • Adjustable clamping force • Double vice (in front and behind the band) • Creep mode for positioning • Electrical and hydraulic bundle clamping preparation • Chip conveyor The SNC 20 control enables convenient and straightforward programming of up to 20 different sawing operations (length and quantity). When the target dimension is entered, the control system automatically calculates the saw kerf and the number of feed cycles. In addition, the error code display system allows for quick fault diagnosis and troubleshooting.

Stanje: novo, Cutting diameter round: 330 mm Cutting diameter square: 330 mm Cutting diameter flat: 400 x 330 mm Saw band length: 4570 x 34 x 1.1 mm Table height: 800 mm Band speed: 20 – 100 m/min Total power requirement: 3.7 kW Machine weight: approx. 2.35 t Dimensions (L x W x H): 2.23 x 2.15 x 1.8 m SPECIAL OFFER PRICE!!!! 2-Column High-Performance Bandsaw Automats of the SBS Series The SBS series impresses with proven technology, superior quality, durability, and an unrivalled range of standard features. Ncsdpfxefb Nbgo Ah Uot • Modern SNC 20 control system (CNC version) • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic band tensioning • Clamping pressure regulation • Double clamping vice (in front of and behind the band) • Creep speed for positioning • Electrically and hydraulically pre-equipped bundle clamping • Swarf conveyor The SNC 20 control system allows for convenient and straightforward programming of up to 20 different sawing tasks (length and quantity). When entering the desired length, the control system automatically calculates cut loss and the number of feed strokes required. The error code display system also enables quick error analysis and troubleshooting.

Stanje: novo, Cutting diameter round: 460 mm Cutting diameter square: 460 mm Cutting diameter flat: 460 x 460 mm Saw band length: 5450 x 41 x 1.3 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight: approx. 3.2 t Dimensions (L x W x H): 2,675 x 2.15 x 2.05 m SPECIAL OFFER PRICE!!!! 2-Column High-Performance Bandsaw Automats of the SBS Series The SBS series stands out for its advanced technology, high quality, durability, and an exceptionally extensive standard configuration. • Modern SNC 20 control system for CNC models • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic blade tensioning • Clamping pressure regulation • Double vice (before and after the blade) Ncodpfx Ahefg E Hvo Ujt • Jog mode for positioning • Bundle clamping, electrically and hydraulically prepared • Chip conveyor The SNC 20 control enables easy and intuitive input of up to 20 different sawing jobs (length and quantity). Upon entering the required dimensions, the control automatically calculates the saw kerf and the number of feed cycles. Additionally, the error code display system provides rapid fault analysis and troubleshooting.

Stanje: novo, Cutting capacity at 90 degrees: round 510 mm Cutting capacity at 90 degrees: square 480 mm Cutting capacity at 90 degrees: rectangular 610 x 450 mm Saw blade length 5320 x 34 x 1.1 mm Ncodpfxsfu Nbbe Ah Ujt Blade speed 15 - 100 m/min Table height 820 mm Total power requirement 3.0 kW Machine weight approx. 2.3 t Space requirement approx. 2.65 x 2.8 x 2.2 m For mitre cuts up to 45° to the left in fully automatic mode and up to 60° to the left in semi-automatic mode Material height sensor (automatic cut start detection) Automatic feed unit via ball screw incremental feed with automatic length compensation Sensor on the saw blade for automatic adjustment of the saw stroke Fully automatic control of saw frame and clamping device Hydraulic unit with automatic pressure switch-off in idle mode Mechanical swarf removal brush, feed vice opens on both sides Remnant piece length 100 mm Modern CNC control, freely programmable for multiple cutting jobs with various cutting lengths and quantities. Automatic feed unit, 500 mm via ball screw incremental feed with automatic length compensation. Adjustable for cut lengths from 25 – 9,999 mm. Fully hydraulic control of saw frame and clamping devices Selection of 3 different material feed rates Visualization of the entire workflow with simple data entry

Stanje: novo, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangular 820 x 610 mm Saw blade length: 5850 x 41 x 1.3 mm Blade speed: 15 – 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.45 t Space requirement: approx. 5.85 x 3.6 x 2.7 m 2-column bandsaw for fast cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, smooth and ergonomic sawing Specially developed for cutting profiles, beams, and solid material. Material clamping is performed vertically on both the infeed and outfeed sides. Starting with the K-tech 800H model, the machine is equipped as standard with an additional horizontal clamping vise. The interaction of the hydraulic saw frame lowering, material positioning, and the pusher system is controlled by CNC. The machines come standard with the environmentally friendly 'B&S Clean Cut cutting system' with minimal quantity lubrication, saving on cleaning effort and conserving resources. CNC Control A CNC control allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitre angles. Nsdpfx Ajfgyifsh Uoct The B&S pusher system, feed and positioning unit, is fitted with 'double-opening clamping jaws' controlled hydraulically. This ensures secure gripping and transport of materials and bundles that may deviate from the ideal form. The pusher system is constructed separately and is guided by ball-bearing linear guides, a ground rack, and a frequency-controlled, robust gear motor.

Stanje: novo, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250 x 600 mm Saw blade dimensions: 8140 x 54 x 1.6 mm Blade speed: 15 – 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight approx. 4.96 t Space requirements approx. 5.7 x 4.0 x 2.75 m 2-column band saw for fast cutting, K-tech 1200H, with push system P 30. P 60 (optional). Fast, smooth, and ergonomic cutting. Specially developed for cutting profiles and beams as well as solid material. Material clamping is performed vertically on both the infeed and outfeed sides. Starting from the K-tech 800 H, the machine comes standard with an additional horizontal vice. The interaction of hydraulic saw frame descent, material positioning, and the pusher system is CNC-controlled. Ncsdsfgyigepfx Ah Ust The machines come standard with the environmentally friendly "B&S Clean Cut cutting system" with minimum quantity lubrication. This reduces cleaning effort and conserves resources. CNC control A CNC control allows programming of up to 90 cutting programs with different cutting lengths, quantities, and mitre angles. The B&S pusher system, feeder, and positioning system is equipped with "double-sided opening gripper jaws" that are hydraulically actuated. This ensures safe gripping and transport of materials and bundles that deviate slightly from the ideal shape. The pusher system is built as a separate unit and is guided via ball-bearing linear guides, a precision-ground rack, and a frequency-driven, robust geared motor.

Stanje: novo, Cutting range at 90 degrees: round 680 mm Cutting range at 90 degrees: square 640 mm Cutting range at 90 degrees: rectangle 820x610 mm Cutting range at 45 degrees: round 550 mm Cutting range at 45 degrees: square 550 mm Cutting range at 45 degrees: flat 550x600 mm Cutting range at 60 degrees: round 370 mm Cutting range at 60 degrees: square 370 mm Cutting range at 60 degrees: flat 370x600/450 mm Saw blade length 7260 x 41 x 1.3 mm Blade speed 15 - 100 m/min Table height 800 mm Total power requirement 5.5 kW Ncsdpfsfg E Hmox Ah Ust Machine weight approx. 4.8 t Space requirement approx. 5.85 x 3.7 x 2.7 m 2-column double-mitre band saw for rapid cutting with pusher system P15. Option: P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new “B&S positioning system”. An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake, featuring large-radial center positioning. The work table is mounted with high-quality preloaded bearings to ensure very smooth rotation. CNC control A CNC control allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitre angles. Dual-side gripping positioning system The B&S pusher system, feeding and positioning device, is equipped with “dual-side opening grippers” which are hydraulically controlled. This ensures secure gripping and transport of materials and bundles that may deviate slightly from the ideal shape. The pusher system is structurally separate and guided via ball-bearing linear rails, a precision-ground rack, and a robust, frequency-driven gear motor.

Stanje: novo, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250 x 600 mm Cutting capacity at 45°: round 680 mm Cutting capacity at 45°: square 600 mm Cutting capacity at 45°: flat 870 x 600 mm Cutting capacity at 60°: round 580/550 mm Cutting capacity at 60°: square 530/450 mm Cutting capacity at 60°: flat 550 x 450 mm Saw blade length 8140 x 54 x 1.6 mm Band speed 15 - 90 m/min Table height 855 mm Total power requirement 7.5 kW Machine weight approx. 5.3 t Space requirement approx. 5.75 x 4.2 x 2.75 m 2-column double mitre bandsaw for fast cutting with Pusher System P15. Option P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new "B&S positioning system". An intelligent NC control ensures seamless interaction of linear encoder and self-braking positioning motor in combination with reliable hydraulic braking via large-radial centre positioning. The work table is mounted on high-quality preloaded bearings, Nodefg E Hnjpfx Ah Usct which ensure extremely smooth rotation. CNC control A CNC control enables programming of up to 90 cutting programs with different cutting lengths, quantities and mitre angles. Positioning system with double-sided clamps The B&S pusher system—feeding and positioning system—is equipped with double-sided hydraulic gripping tongs. This ensures secure gripping and transportation of materials and bundles deviating slightly from the ideal shape. The pusher system is a separate unit and is guided by ball-bearing linear guides, ground rack, and a frequency-driven robust gearbox motor.

Stanje: novo, Cutting range at 90°: round 310 mm Cutting range at 90°: square 280 mm Cutting range at 90°: rectangular 400 x 250 mm Saw blade length: 4020 x 34 x 1.1 mm Blade speed: 18 - 100 m/min Table height: 890 mm Nedpfx Aod Iipreh Uect Total connected load: 2.2 kW Machine weight approx. 0.99 t Space requirement approx. 1.85 x 2.2 x 2.0 m Mitre band saw, fully automatic, GBS 310/400 VA-I CNC • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from a single casting, very quiet operation with minimal vibration • Removable chip tray (disinfection) • Impact-resistant and ergonomic control panel with oil-resistant EPDM cover • Top access to saw, material and feed unit • Safety cover can be folded up • Fine feed adjustment • Semi-automatic cut! • Optimize workflows with CNC control Input options for various parameters such as quantities and material lengths, automatic calculation of the kerf • CNC control for 10 different saw programs with 99 subprograms for various lengths and quantities, e.g., one cutting program with various cut lengths • Automatic feed unit (CNC) via ball screw incremental feed with automatic length compensation. Adjustable for cut lengths from 2 mm to 9,999 mm, remnant length 170 mm.

Stanje: novo, Cutting capacity at 90 degrees: round 255 mm Nedpfx Ajd Iip Ash Usct Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 870 mm Band speed: 18 - 110 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 0.63 t Space requirement approx. 1.8 x 1.85 x 1.85 m Mitre band saw, fully automatic GBS 250 Super VA-I MPS • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Shock-resistant and ergonomic control panel with oil-resistant EPDM cover (a). • Material height sensor (c). (Automatic cut start detection) • Frame and gearbox cast in one piece, very quiet cutting and low vibration • Removable chip tray (for cleaning/disinfection) • Excellent accessibility to saw, material, and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic cut! Automatic sawing with microprocessor control Adjustable for 2 program levels Semi-automatic operation Fully automatic operation Start after entering required quantity and length: material infeed, cutting process, and piece counting until the program is completed • MPS control for setting the required number of feed strokes • All important machine data is displayed on the LED display during the cutting process (power consumption, cutting time, quantity) • Entered data is stored in RAM memory • The self-diagnostic circuit automatically displays any irregularities as error messages and monitors the entire process • Feed unit mounted on floating bearings • Length adjustment via handwheel and vernier with mechanical position display. Adjustable for cut lengths from 2.5 mm to 420 mm, or by reverse feed function, repeatable 1 - 29 times, remaining workpiece length 210 mm

Stanje: novo, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Saw band dimensions: 4640 x 34 x 1.1 mm Band speed: 15 - 115 m/min Total power requirement: 5.5 kW Machine weight: approx. 2.8 t Dimensions (L x W x H): 3.2 x 2.2 x 2.7 m Automatic electromechanical bandsaw machine in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to max. 350 x 350 mm. Standard equipment includes: • Powered chip conveyor, mountable to the right or left side of the machine • Clamping pressure regulation for the vices • Material feeder with vertical rollers for lateral material support • Sensors for material start detection • Clamping pressure adjustment • Storage for up to 300 programs Ncsdpfx Ahefm T Hbs Uot • The machine is available with either 34 mm or 41 mm blade at no extra charge Price on request.

Leto izdelave: 2013, stanje: rabljeno, Cutting diameter: 420 mm Bandsaw blade dimensions: 41 x 5600 mm Nsdpfsd Izmajx Ah Ujct Cutting width: 1.3 mm Control system: Simatic S7 Touch Blade speed: 17 - 110 m/min Saw motor: 7.5 kW Bar material diameter: 420 x 3000 mm Bar material diameter: 300 x 6000 mm Total power requirement: 30 kW Machine weight: approx. 18.5 t Space required: approx. 12.5 x 5.0 x 2.5 m CNC sawing system with JAESPA Compact 4S band saw, equipped with round steel magazine and discharge gripper for sawing round bars from 50 to 420 mm. Includes 6 storage compartments with a maximum bar weight per compartment of 3,400 kg. Cut lengths: 20 – 1,000 mm. Like-new condition, approx. 1,000 working hours.

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.680 mm, skupna širina: 2.350 mm, skupna višina: 1.350 mm, vrsta vhodnega toka: Klimatska naprava, skupna masa: 1.800 kg, Razpon rezanja okroglega jekla pri 45°: 300 mm, Obseg rezanja okroglega jekla pri 90°: 325 mm, dolžina tračnega lista: 4.400 mm, širina tračne žage: 34 mm, delovna višina: 750 mm, hitrost rezanja: 150 mm/min, vrsta nastavitve višine: hidravlični, Technical Specifications: Clamping Range for Bundle Clamping: Width: 0 – 300 mm Height: 5 – 300 mm Material Feed: Single: 0 – 600 mm Multiple: 0 – 9999 mm Minimum Remnant Length: Manual: approx. 70 mm Automatic: approx. 300 mm Cutting Speed: 15 to 150 m/min – AC drive Cutting Pressure: infinitely adjustable, hydraulic Descent Speed: 0 to 300 mm/min – stepless Saw Blade Dimensions: 4400 x 34 x 1.1 mm Saw Blade Tension: With torque wrench Machine Weight: approx. 1800 kg (net) Machine Dimensions (L x W x H): approx. 2680 x 2350 x 1350 mm Max. Support Weight: Material weight max. 250 kg/m Working Height: 750 mm With leveling elements approx. 800 mm (optional) Noise Emission: 74 dB(A) Measured at the operator’s workstation Njdoq Atyzspfx Ah Uect Including the two pictured roller conveyors.

Stanje: rabljeno, Mitre saw BERG & SCHMIDT Junior 275 - used - Base frame, Mobile stand Ncodou R S I Hspfx Ah Ust ----- Technical specifications ----- Cutting height: 60 mm, Voltage: 230 V

Stanje: rabljeno, Technical specifications: Stroke: 45 mm Installation height: 205 mm Throat depth: 92 mm Pressing force: approx. 2 kN Table size: 120 x 160 mm Distance between table and ram: max. 205 mm Dimensions (L x W x H): 0.24 x 0.17 x 0.8 m Nodpsu N A D Asfx Ah Uect Total weight approx.: 23 kg This is a benchtop device. Ram can be adjusted at a height of 140 mm using the hand crank after loosening the hexagon socket screws. Ram holder Ø 10 mm with return spring Base with 2 clamping holes Ø 12 mm

Stanje: rabljeno, Technical Details: Saw blade diameter: 350 mm Cutting capacity at 90 degrees, round: 110 mm Cutting capacity at 90 degrees, square: 85 x 85 mm Cutting capacity at 90 degrees, flat: 180 x 85 mm Cutting capacity at 45 degrees, round: left/right: 105 / 110 mm Cutting capacity at 45 degrees, square: left/right: 85 x 85 / 85 x 85 mm Cutting capacity at 45 degrees, flat: left/right: 130 x 85 / 130 x 85 mm Saw blade bore: 40 mm Speed range – stepless: 9 / 18 / 36 / 74 / 4-step rpm Rotary table: Ø 400 mm/min Table swiveling +/-: 60° right and 45° left Compressed air connection: 7 bar Total power requirement: approx. 2.2 kW Machine weight approx.: 430 kg Machine dimensions: W: 0.7 x D: 1.01 x H: 2.1 m The circular saw is an electro-hydro-pneumatic semi-automatic circular saw, which allows mitre cuts up to 45° to the left and 60° to the right on profiles and solid materials. Vertical circular saw Nodpfx Ahou Nilyj Ujct Robust, heavy cast construction Max. vice opening: 180 mm Cut counter Vertical travel of saw head: 200 mm Vice opening width max.: 180 mm (jaw size W: 220 x H: 70 mm) Operation via control panel

Stanje: rabljeno, Leto izdelave: 1997, Bar diameter 8 - 52 mm Bar length - max. 3200 mm Number of bars 6 / ø 52 mm Oil capacity 150 l Weight 700 kg Total power requirement 0.75 kW Nedpfxevh Nc Ee Ah Uect

Stanje: rabljeno, Leto izdelave: 2001, Bar diameter: 8 - 52 mm Bar length - max.: 3,200 mm Number of bars: 6 / ø 52 mm Oil capacity: 150 l Ncodpfx Ahsvh Nclj Uot Weight: 700 kg Total power requirement: 0.75 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, vhodna napetost: 400 V, Oprema: CE označba, Kotna tračna žaga - za poševne reze levo 60° in desno 45° - hitrost rezanja 37+74 m/min - samodejno spuščanje okvirja žage s hitrim približevanjem obdelovancu in izklopom na koncu reza - hitrovpenjalni primež v T-utorju, pomičen za hitro menjavo položaja - krtača za odvajanje ostružkov - samodejno hlajenje - stojalo za stroj - vključuje 1 žagin trak HSS-Biflex 2765 x 27 x 0,90 mm Območje rezanja: Ncedoy Id Dcepfx Ah Ujt 90° Okroglo Ø 255 mm Kvadratno 240 mm Pravokotno 300 x 180 mm 45° Okroglo Ø 210 mm Kvadratno 190 mm Pravokotno 210 x 100 mm 60° Okroglo Ø 135 mm Kvadratno 115 mm Pravokotno 140 x 90 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, vhodna napetost: 400 V, Kotna tračna žaga - Priključna napetost 400 V - Za poševne reze levo do 60° - Hitrost rezanja 30+60 m/min - Vodilo tračnega lista iz karbida - Avtomatsko hlajenje - Podnožje stroja z odlagalnim predalom za orodje Nodpfx Aoy H D Ifjh Ujct - Vključuje 1 HSS-Biflex tračni list 2140 x 20 x 0,90 mm Območje rezanja: 90° Okroglo Ø 175 mm Kvadratno 170 mm Pravokotno 190 x 130 mm 45° Okroglo Ø 110 mm Kvadratno 110 mm Pravokotno 150 x 110 mm 60° Okroglo Ø 75 mm Kvadratno 75 mm Pravokotno 100 x 75 mm

Stanje: rabljeno, Oprema: Ročna stiskalnica za bukove vogale, hod 40 mm, grlo 73 mm Nedpsx Rh D Sofx Ah Ujct

Stanje: dober (rabljeno), Stroj za rezanje navojev Berg + Schmid Delta 4 Opis izdelka Obseg rezanja: R 1/3 - 4", M8-M52 Zmogljiv kondenzatorski motor 230V, 1 kW, posebno tiho delovanje 3 hitrosti vrtenja: 15, 27, 58 min-1 (tudi pod polno obremenitvijo, vgrajen menjalnik) Z 2 avtomatskima rezalnima glavama: R 1/2 - 2", R 2 1/2 - 4" Komplet z rezalnimi čeljustmi R 1/2 - 3/4", R1"-2", R 2 1/2 - 4", konične DIN 2999 Ncedpfjyy S Efex Ah Ust Samodejno hlajenje neposredno skozi rezalno glavo Hitro-vpenjalna glava, rezalnik cevi, notranji rezkalnik cevi Vključno z opremo za varnost pri delu z varnostnim nožnim stikalom in 4 podstavki

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2019, 2-stebri visokozmogljiv avtomatski tračni žagalni stroj BERG & SCHMID SBS 300 VA-1/CNC Leto izdelave: 2019 Premer reza okroglo: 300 mm Nsdpfxoyw H Ens Ah Uoct Premer reza kvadratno: 300 mm Premer reza ploščato: 300 mm x 260 mm Hitrost traku: 20 – 100 m/min Sodobno upravljanje SNC 20 Žaganje z regulacijo frekvence Upravljalne tipke s piktogrami Pogonska ščetka za ostružke Hidravlično napenjanje traku Regulacija vpenjalnega pritiska Delovna luč Transporter za ostružke Valjčna proga 2 m

Stanje: zelo dobro (rabljeno), Premer žaginega lista: 370 mm Območje reza pri 90° okroglo: 120 mm kvadratno: 100 mm pravokotno: 180 x 100 mm pri 45° okroglo: 120 mm Njdjx Ek A Tjpfx Ah Usct kvadratno: 100 mm pri 60° okroglo: 110 mm kvadratno: 90 mm 2 hitrosti vrtenja žaginega lista: 15/70 vrt/min Pogonski motor: 400 V, 1,8/2,2 kW Potrebni prostor: 1000 x 1000 x 1800 mm Teža: 390 kg

Stanje: novo, Cutting diameter round: 300 mm Cutting diameter square: 300 mm Cutting capacity flat: 300 x 260 mm Saw blade length: 3920 x 34 x 1.1 mm Table height: 780 mm Blade speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight: approx. 1.65 t Dimensions (L x W x H): 2.0 x 2.05 x 1.7 m Unused exhibition machine!!!! 2-column high-performance automatic bandsaw of the SBS series Ncodpexfwbtofx Ah Ujt • Modern SNC 20 control in CNC configuration • Frequency-controlled saw drive • Work light • Powered chip brush • Hydraulic blade tension • Adjustable clamping pressure • Double vice (in front of and behind the blade) • Creep speed for positioning • Bundle clamping, electrically and hydraulically prepared • Chip conveyor The SNC 20 control enables convenient and user-friendly input of up to 20 different sawing jobs (length and quantity). When the desired dimensions are entered, the control automatically calculates the cutting waste and the number of feed cycles. In addition, the error code display system allows for fast troubleshooting. Including band run-off detection (€1,800)