Tračna žaga - avtomatski - vodoravno

BERG & SCHMID K-tech DG 1.202

Leto izdelave: 2010, Stanje: zelo dobro (rabljeno), Kammer innen: 2000 x 1250 x 1250 mm Innenvolumen: 2344 Liter Temperaturen bis zu 400 °C (Leistung: 33 kW) Vortemperieren / Trocknen für manuelle, zyklische und CNC-Bearbeitung bis hin zur interaktiven Konturprogrammierung Abgedeckte Führungsbahnen (DGP) für dauerhaft hohe Präzision Direktantrieb vom Motor zur Hauptspindel für besonders ruhigen Lauf Blsdpfx Aeuqkwfjfned Umlaufschmierung mit Filterung zur Schmierung des Präzisions-Hauptspindellagers Kombinierte Steuereinheit für wirtschaftlich vorteilhaftes Programmieren und Bedienen der Maschine sowie optimalen Zugang zum Arbeitsbereich Länge: 2500 mm Breite: 2015 mm Höhe: 2900 mm Gewicht: 4000 kg

Stanje: novo, Model designation Bledpfx Aegvqzcofnsd Airtower FT 20,000

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut Blsdpefg E Hlofx Afnsd • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Bljdpfju Aa I Sox Afnjd Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: novo, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650x450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Bljdpfx Afod Iipmened Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL PRICE!!! 2-Column Double Mitre Band Saw K-tech DG 62/45 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to angled cutting, feed control, and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for easy cleaning/disinfection) • Energy-efficient and low-vibration due to angled cutting • Ergonomic, safe, and free-standing control panel • Frequency-controlled blade drive 15-100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Oversized drive wheels (520 mm each) • Clear mitre adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid approach down to start of material, or commence series cutting 4. Switch off saw blade 5. Raise frame just above the material 6. Vise opens

Stanje: novo, Leto izdelave: 2026, Oy Foudila Ab je podjetje iz Kaskinena na Finskem z več kot 45-letnimi izkušnjami na področju opreme za ravnanje z lesom. Zadnjih 15 let smo aktivni tudi v paletni industriji, kjer smo razvili številne stroje za žebljanje, avtomatsko podajanje in zlaganje lesa. Proizvajamo tako standardne stroje kot tudi prilagojene rešitve glede na potrebe kupcev. LNM3500 je prilagodljiv, kompakten in učinkovit pnevmatski stroj za žebljanje, namenjen izdelavi nog za proizvodnjo palet. Uporabniku prijazen program omogoča zelo hitro preklapljanje nastavitev, stroj pa lahko shrani parametre za več kot 100 različnih tipov nog. Opremljen je s tremi Bostitch žebljičniki z nabojniki za jumbo kolute in indikatorji polnosti. Možna je izdelava nog z 2 do 30 bloki na nogo. Stroj je opremljen z veliko kaseto za deske ter zaščitnim pokrovom za dušenje zvoka in varnost. Upravljanje poteka preko 10" zaslona na dotik in Beckhoff krmilnega sistema. Stroj je lahko dodatno opremljen z optimiziranim rezalnikom blokov ter avtomatskim podajanjem blokov v stroj za žebljanje. Rezalnik blokov je mogoče namestiti na zadnjo ali stransko stran stroja. Dimenzije za standardni stroj: - Deske: dolžina 600–3500 mm, širina 60–125 mm, višina 16–28 mm - Bloki: dolžina 60–150 mm, širina 60–125 mm, višina 50–100 mm Bljdpfx Asi Hkqmjfnod Zmogljivost: - 21 blokov/minuto Dimenzije stroja (brez rezalnika blokov): - Dolžina 9000 mm, širina 1000 mm, višina 1900 mm Stroj ima oznako CE. Stroj za žebljanje nog je lahko dodatno opremljen z avtomatskim zlagalnikom končnih nog. Za več informacij, slike in videoposnetke nas prosimo kontaktirajte.

Leto izdelave: 2013, Stanje: rabljeno, Cutting diameter: 420 mm Bandsaw blade dimensions: 41 x 5600 mm Cutting width: 1.3 mm Control system: Simatic S7 Touch Bloded Izmajpfx Afnsd Blade speed: 17 - 110 m/min Saw motor: 7.5 kW Bar material diameter: 420 x 3000 mm Bar material diameter: 300 x 6000 mm Total power requirement: 30 kW Machine weight: approx. 18.5 t Space required: approx. 12.5 x 5.0 x 2.5 m CNC sawing system with JAESPA Compact 4S band saw, equipped with round steel magazine and discharge gripper for sawing round bars from 50 to 420 mm. Includes 6 storage compartments with a maximum bar weight per compartment of 3,400 kg. Cut lengths: 20 – 1,000 mm. Like-new condition, approx. 1,000 working hours.

Stanje: dober (rabljeno), Leto izdelave: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid-action radial drilling machine -Clamping table: 400 x 1100 mm -Arm reach: 930 mm -Taper: MT4 Bodpoirax Usfx Afnold -Motor power: 1.35/1.8 kW -Spindle speeds: 41–1700 rpm -Column diameter: Ø 200 mm -Spindle stroke: 125 mm -Tapping device: YES -Feed: 0.075 – 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500 kg

Stanje: novo, Primerljivo z Behringer, Kaltenbach, Kasto, Jaespa itd. Rezno območje 90° okroglo 260 mm ploščato 300x260 mm najmanjši premer 5 mm NC-krmiljen, avtomatski podajalnik materiala s hidravličnim popolnim vpenjanjem materiala enostavno upravljanje preko NC-krmiljenja z jasnim tekstovnim prikazom Bledsh Tnd Ajpfx Afnod Funkcija prednastavitve materiala brez ponovnega vpenjanja pri kratkih segmentih Stabilna, linearno vodena pomična čeljust s servopozicioniranjem za maksimalno natančnost Samodejna nastavitev vodila traku glede na širino materiala Priporočene opcije: poganjana krtača za ostružke, sinhronizirana s hitrostjo traku posebej postavljena nadzorna plošča 7" CE panel, možnost omrežne povezave, shranjevanje do 1000 zapisov, zgodovinski pomnilnik za različne funkcije in podatke itd.

Leto izdelave: 2024, Stanje: novo, Bending capacity: 6 mm Blsdoftdh Iepfx Afnod Pre-bending: 5 mm Bending capacity: 6 mm Pre-bending: 5 mm Bending length: 2,030 mm Roll diameter: 170 mm Motor power: 4 kW Length: 3,600 mm Width: 1,020 mm Height: 1,120 mm Weight: 2,400 kg The machine can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. Additional machines are available for demonstration at our location in Staufenberg. Further information is available upon request.