Tračna žaga - avtomatski

JAESPA Compact 4S

Leto izdelave: 2014, Stanje: pripravljen za uporabo (rabljen), A defective ABA CNC precision surface and profile grinding machine is available. Grinding length: 2500 mm, grinding width: 1020 mm, cross traverse: 920 mm, intermittent cross feed: 750 mm/stroke, continuous cross feed: 5000 mm/min, table-to-spindle center distance: 1100 mm, magnetic table dimensions X/Y: 2500 mm/1000 mm, max. table load: 5000 kg, table speed: 60 m/min, spindle power: 26 kW, grinding wheel dimensions X/Y/Z: 500 mm/100 mm/203 mm, grinding wheel speed: 35 m/s. Machine dimensions X/Y/Z: approx. 8000 mm/4000 mm/3150 mm, weight: approx. 20,000 kg, control: Siemens Sinumerik 840 D-Solutionline, operating hours: approx. 1,000 h, cycle hours: approx. 400 h. Includes Hyfra sigma 13-S cooling unit, year of manufacture: 2014. The linear drive of the X-axis is defective and has been removed. Documentation available. An on-site inspection is possible. Fedpjwi Tpkefx Afleft

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. Fedpfx Afjfg E Hpslsft - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: pripravljen za uporabo (rabljen), An air-conditioned office and commercial container by Aztech is available. U-value: approx. 0.38W–0.46W/m²K, floor load capacity: approx. 100kg/m², internal height: approx. 2,500mm, external dimensions (L/W/H): approx. 3,000mm/3,000mm/2,600mm, weight: approx. 800kg. Documentation available. On-site inspection possible. Fodpfx Afsw D Eubolsft

Stanje: rabljeno, Leto izdelave: 2025, številka stroja/vozila: I24H029634, vrsta goriva: dizel, moč: 463 kW (629,50 KM), proizvajalec motorjev: Cummins, Namen uporabe: gradbeništvo Lastna teža: 5.680 kg Fodpfjwqw Dnox Afleft Moč generatorja: 550 kVA Transportne dimenzije (D x Š x V): 4,51 x 1,78 x 2,62 m Za dodatne informacije kontaktirajte skupino PFEIFER.

Leto izdelave: 2023, Stanje: novo, Brand: Kawakenki Model: KK70-III-SSS Year of manufacture: Unused, 2023 Serial number: On request Capacity (kVA): 70 Engine model: N4105ZLD Engine power (kW): 66 Fuel: Diesel Alternator model: STC-70 Voltage: 230-400 V Frequency (Hz): 50 RPM: 1500 Current (A): 101 Dimensions LxWxH (mm): 2150 x 880 x 1150 Weight (kg) approx.: 880 Units in stock: 2 Fjdpfxeltmghj Afljft Country of origin: China Comments: Unused, soundproofed diesel generator equipped with M.AQUA genset controller.

Leto izdelave: 1996, Stanje: rabljeno, Schütte SF 26S DNT Year of manufacture: 1996 Control: Siemens 840C Number of spindles: 6 Max. bar diameter [mm]: 26 Bar loader magazine: Cucchi BLT Multi-6 (year 2015) Positions I + III + IV + VI: Longitudinal and cross slides Positions II + V: CNC slides Feed in position VI Pick-off device in position VI Coolant system Fjdpsi Hb Szofx Afloft Ruez hinge belt conveyor integrated in machine bed Knoll hinge belt conveyor 280 S-1/40 ID 26565 (external) Electrostatic separator ISI RON/A 2500A, ID 26295

Leto izdelave: 2023, obratovalne ure: 1 h, Stanje: novo, Intersonik tunel-tip avtomatski stroj za pranje. Skrinje, kutije, kalupi, poklopci itd. možete prati u kontinuiranom i automatskom stroju za pranje. Idealan za prehrambenu industriju. Idealan za automobilsku industriju. Stroj za pranje KLT sanduka, pranje sanduka, pranje plastičnih kutija, automatski stroj za pranje, pranje raspršivanjem, tunelsko pranje. Ffsdpfx Afsd Tnuaslst Za dodatne informacije kontaktirajte nas.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 1.200 mm, merilno območje osi Y: 2.000 mm, merilno območje os Z: 1.000 mm, Measuring ranges X-axis: 1200 mm Fedpfx Aodv I Abjflsft Y-axis: 2000 mm Z-axis: 1000 mm Length measurement uncertainty ISO 10360 E = [2.6 + 4L/1000] µm CNC control: Renishaw UCC S5 Handheld terminal: Renishaw MCU-5, optionally wireless MCU-5W Temperature sensors: Renishaw Probe system: Renishaw REVO-2 5-axis scanning system Probe change system: Renishaw (Price REVO approx. €80,000 new) Software: Inspect3D Inca V6 new license (all languages) Original year of construction: 2014, modernized in 2017 and 2025 Exchange for another CMM possible

Stanje: novo, Continuous drilling capacity in St 60: 15 mm Standard drilling capacity: 18 mm Tapping capacity: M8 Spindle: MT 2 Drilling depth: 80 mm Ffsdpfx Asb Eldnofljt Throat depth: 180 mm Infinitely variable spindle speeds: 200 - 4,000 rpm Spindle speeds for threading: 200 - 700 rpm Distance spindle/table: up to 380 mm Table surface: 250 x 220 mm Column diameter: 65 mm Overall height: 910 mm Weight: 80 kg Three-phase motor, frequency-controlled: 1.1 kW With full-featured tapping device and programmable digital display Machine in stock and immediately available

Stanje: dober (rabljeno), Leto izdelave: 2008, 1 rabljeni vertikalni obdelovalni center Proizvajalec: Deckel Maho Ffjdpfx Afjxa Eudsljt Tip: DMU 80 monoblock Leto izdelave: 2008 Krmiljenje: ITNC 530 Tehnične podrobnosti X-hod: 980 mm Y-hod: 630 mm Z-hod: 630 mm Krmiljenje: iTNC 530 Skupna moč: 10 / 15 kW Teža stroja pribl.: 9,5 t Dimenzije pribl.: 4 x 4 x 2,5 m Dodatne informacije Oprema: Elektronsko ročno kolo Način delovanja 4 Ročna zasučna glava za rezkanje Motorsko vreteno 12.000 min-1 SK 40 / Vpenjanje DIN 69872 32-pozicijski zalogovnik orodij Fiksna miza 1250 x 700 mm Transporter ostružkov Naprava za hlajenje