Štiri-Smerna Orodje Post nakup rabljenega (7.051)

Stanje: rabljeno, prevoženi kilometri: 186.000 km, moč: 92 kW (125,09 KM), prva registracija: 05/2013, vrsta goriva: dizel, največja dovoljena obremenitev: 1.080 kg, skupna masa: 3.500 kg, konfiguracija osi: 4x2, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 5, število sedežev: 7, dolžina tovornega prostora: 3.150 mm, širina tovornega prostora: 2.100 mm, Leto izdelave: 2013, Used truck FORD TRANSIT 350, double cab with 7 seats, 3.5-ton gross vehicle weight, twin rear wheels, payload capacity 1,080 kg. First registered in 2013, 2200cc TD 125 HP engine, Euro 5, 6-speed manual gearbox, 186,000 km. Cantoni brand three-way tipper body (external dimensions 3150 x 2100 mm). Equipped with front pole rack, 2 cable tensioning winches, rear light protection grids, reinforced rear leaf springs. Features: air conditioning, radio, electric windows, central locking, ABS, ESP, TCS, spare wheel, two keys. Bodywork repainted, interior in good condition, mechanics in good order. Front tyres: 75% | Rear tyres: 75%. Single owner. Hfodpfx Asyrc Awsdrjh ---- CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 Sales staff: Emanuele, Luca, Giuseppe, Davide. Lurago d’Erba (Como Province), Lombardy Opening hours: Monday to Friday: 8:30–12:15 / 14:00–19:00 Saturday: 8:30–12:00 / 14:00–17:00 - Certified mileage. - Test drive available by appointment. - On-site transfer of ownership. - Tailored financing options available. Carlo Mauri Srl accepts no responsibility for any unintentional discrepancies in this advert, which does not constitute a contractual obligation. Prices shown exclude VAT and transfer of ownership.

Stanje: rabljeno, prevoženi kilometri: 186.000 km, moč: 92 kW (125,09 KM), prva registracija: 05/2013, vrsta goriva: dizel, največja dovoljena obremenitev: 1.080 kg, skupna masa: 3.500 kg, konfiguracija osi: 4x2, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 5, število sedežev: 7, dolžina tovornega prostora: 3.150 mm, širina tovornega prostora: 2.100 mm, Leto izdelave: 2013, Used truck FORD TRANSIT 350, double cab with 7 seats, 3.5-ton gross vehicle weight, twin rear wheels, payload capacity 1,080 kg. First registered in 2013, 2200cc TD 125 HP engine, Euro 5, 6-speed manual gearbox, 186,000 km. Cantoni brand three-way tipper body (external dimensions 3150 x 2100 mm). Equipped with front pole rack, 2 cable tensioning winches, rear light protection grids, reinforced rear leaf springs. Features: air conditioning, radio, electric windows, central locking, ABS, ESP, TCS, spare wheel, two keys. Bodywork repainted, interior in good condition, mechanics in good order. Front tyres: 75% | Rear tyres: 75%. Single owner. ---- CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 Sales staff: Emanuele, Luca, Giuseppe, Davide. Lurago d’Erba (Como Province), Lombardy Opening hours: Monday to Friday: 8:30–12:15 / 14:00–19:00 Saturday: 8:30–12:00 / 14:00–17:00 Hjdpjyy Rgnefx Adrefh - Certified mileage. - Test drive available by appointment. - On-site transfer of ownership. - Tailored financing options available. Carlo Mauri Srl accepts no responsibility for any unintentional discrepancies in this advert, which does not constitute a contractual obligation. Prices shown exclude VAT and transfer of ownership.

Stanje: rabljeno, prevoženi kilometri: 179.000 km, moč: 85 kW (115,57 KM), prva registracija: 12/2019, vrsta goriva: dizel, največja dovoljena obremenitev: 800 kg, skupna masa: 3.500 kg, konfiguracija osi: 4x2, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 7, dolžina tovornega prostora: 3.150 mm, širina tovornega prostora: 2.100 mm, Leto izdelave: 2019, Used Truck: Iveco Daily 35C12 Double Cab, 7 seats – 3m Tipper Body – Year: December 2019, Engine: 2.3 TD 115 HP Euro 6, 6-speed Manual Gearbox, Mileage: 179,200 km. – 3.5 tonne GVW, Payload: 800 kg, Twin rear wheels. – Body: Rear tipping bed, external dimensions 3,150 x 2,100 mm, steel sides height 400 mm. – Equipped with: Manual air conditioning, Radio-Bluetooth, Electric windows, Central locking, Airbag, Two keys, Spare wheel. – Bodywork in good condition, Clean and well-kept interior – MOT valid until December 2025. New front and rear tyres. – New turbocharger, recent full service. – Immobilizer alarm not working – Single owner vehicle. CARLO MAURI S.r.l. – Lurago d’Erba – Via Vallassina 6 – Tel. 031.699.049 Sales contacts: Emanuele, Luca, Giuseppe, Davide. – Lurago d’Erba (Province of Como), Lombardy. Hodpfx Adsyy Nk Serofh Opening hours: Monday to Friday: 8:30–12:15 / 14:00–19:00 Saturday: 8:30–12:00 / 14:00–17:00 Mileage certified. Test drive available by appointment. In-house ownership transfer. Tailored financing options available. Carlo Mauri Srl declines any responsibility for unintentional discrepancies in the ad, which does not constitute any contractual obligation. Prices shown exclude VAT and registration fees.

Stanje: rabljeno, prevoženi kilometri: 179.000 km, moč: 85 kW (115,57 KM), prva registracija: 12/2019, vrsta goriva: dizel, največja dovoljena obremenitev: 800 kg, skupna masa: 3.500 kg, konfiguracija osi: 4x2, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 7, dolžina tovornega prostora: 3.150 mm, širina tovornega prostora: 2.100 mm, Leto izdelave: 2019, Used Truck: Iveco Daily 35C12 Double Cab, 7 seats – 3m Tipper Body – Year: December 2019, Engine: 2.3 TD 115 HP Euro 6, 6-speed Manual Gearbox, Mileage: 179,200 km. – 3.5 tonne GVW, Payload: 800 kg, Twin rear wheels. – Body: Rear tipping bed, external dimensions 3,150 x 2,100 mm, steel sides height 400 mm. – Equipped with: Manual air conditioning, Radio-Bluetooth, Electric windows, Central locking, Airbag, Two keys, Spare wheel. – Bodywork in good condition, Clean and well-kept interior – MOT valid until December 2025. New front and rear tyres. – New turbocharger, recent full service. – Immobilizer alarm not working – Single owner vehicle. Hodpeyiyulofx Adrjfh CARLO MAURI S.r.l. – Lurago d’Erba – Via Vallassina 6 – Tel. 031.699.049 Sales contacts: Emanuele, Luca, Giuseppe, Davide. – Lurago d’Erba (Province of Como), Lombardy. Opening hours: Monday to Friday: 8:30–12:15 / 14:00–19:00 Saturday: 8:30–12:00 / 14:00–17:00 Mileage certified. Test drive available by appointment. In-house ownership transfer. Tailored financing options available. Carlo Mauri Srl declines any responsibility for unintentional discrepancies in the ad, which does not constitute any contractual obligation. Prices shown exclude VAT and registration fees.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, največja dovoljena obremenitev: 7.500 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 12.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, prva registracija: 11/2005, prostornina tovornega prostora: 24 m³, skupna dolžina: 8.510 mm, skupna širina: 2.550 mm, velikost pnevmatike: 315/80 R 22.5, Leto izdelave: 2005, Oprema: dvižna zadnja plošča, oporno kolo, THREE-AXLE SEMITRAILER, 10 WHEELS, REAR TIPPER, BRAND MINERVA MODEL SUPERSTAR. Length: 8,510 mm, single owner. Equipped with 10 wheels, hydropneumatic suspension, electric tarpaulin cover, rear extension for paver. Full tractor unit coupling available and guaranteed, with certification. We have a wide range available in our used fleet from leading premium brands on the market: DAF, SCANIA, MAN, VOLVO, IVECO. This is a Minerva Superstar with 10 tyres, hydropneumatic suspension, short wheelbase, steel body with 24 m³ capacity, original thicknesses 8/6 mm, unladen weight 7,500 kg. Excellent condition! Financing available up to 60 installments with the best rates on the market. Hsdpfsycf T Hsx Adrofh Description may erroneously contain features that differ from the actual vehicle and must be verified on-site. This sheet does not constitute a contractual commitment. For further information and clarification, please call the numbers provided (also available on WhatsApp Direct). Paolo Antonio Gorgoni All photos are taken on site at our premises, so they are genuine and accurately represent the vehicle's current state. Please note that the system may automatically insert features and accessories, which might occasionally differ from actual specifications. To ensure full accuracy, please always verify features and equipment directly with us. Rear tipper body: 24 m³, length: 8.50 m, electric tarpaulin cover, rear extension for paver with relevant accessories, 10 tyres.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, - FAGOR 3-axis position display, model: 400iB INNOVA - Milling head manually swivels ± 90° - Manual tool clamping via draw bolt M 16 for vertical and horizontal spindle - Swiveling control panel - Motor for horizontal and vertical spindle - Feed motors with inverter for X/Y/Z axes - Precision ball screw drives in X/Y/Z axes - Gearbox for 12 spindle speeds - Counterholder with support bearing - 1 pc. long milling arbor 27 mm - 3 pcs. reduction sleeves (MK1, MK2, MK3) - Spindle guard with safety switch - Splash guard on 3 sides of the horizontal table - LED work light - Automatic lubrication system for X/Y/Z guideways - Mechanical handwheels for X/Y/Z axes - Coolant system - Covers for X/Z axes - Operating tools - Technical documentation - CE conform design Colours: - RAL 7024 – Graphite grey - RAL 7035 – Light grey Technical Data: Fixed Angle Table: - Working surface dimensions: 845 x 390 mm - T-slots: Number / Width x Pitch: 5 pcs. / 14 x 63 mm - Max. table load: 250 kg Vertical Table: - Working surface dimensions: 950 x 250 mm - T-slots: Number / Width x Pitch: 3 pcs. / 14 x 63 mm Hfodpfevt Tn Asx Adreh Travel distances: - Axis travel: automatic/manual - Longitudinal (X): 420 mm - Cross (Y): 220 mm - Vertical (Z): 380 mm Vertical Milling Head: - Tool holder: ISO 40 / DIN 2080 - Speed range: 65 – 2,600 rpm - Number of spindle speeds: 12 (65 – 100 – 130 – 175 – 260 – 357 – 485 – 690 – 950 – 1,325 – 1,870 – 2,600) - Quill stroke, manual: 100 mm - Head swivel: ± 90° - Spindle nose/table distance: 90 – 470 mm - Spindle centre to column – min./max.: 120 – 340 mm Horizontal Spindle: - Tool holder: ISO 40 / DIN 2080 - Gear stages: 12 - Speed range: 65 – 2,600 rpm - Spindle centre/table distance: 100 – 480 mm Feeds: - Control: stepless - Range (X,Y,Z): 0 - 1,000 mm/min - Rapid traverse (X,Y,Z axes): 1,000 mm/min Motors: - Main drive power: 2.2 kW - Feed motor power (X-Y-Z): 0.35 kW - Coolant pump: 0.09 kW Dimensions and Weight: - Dimensions (W x D x H): 1,621 x 1,527 x 1,938 mm - Weight: 1,300 kg

Stanje: rabljeno, Leto izdelave: 1980, No. 3192 Four-Side Planer WEINIG U 17 A Used, year of manufacture 1980, machine available from February 2025 Machine still in operation 6 spindles Spindle arrangement: bottom – right – left – top – bottom – bottom Working width: 170 mm (with a tooling circle of 125 mm) Working height: 120 mm (with a tooling circle of 125 mm) Jointing spindle: 4 HP Hfedevkhccspfx Adrsh All other spindles: 5.5 HP Feed: 2 or 3 HP Spindle speed: 6000 rpm Working spindle diameter: 40 mm Smallest tooling circle diameter of profiling spindles: 100 mm Largest tooling circle diameter of profiling spindles: 180 mm Feed continuously variable: 6 – 18 m/min Feed roller diameter (hardened): 140 mm Feed roller width: 50 mm Adjustment range of infeed table and jointing fence (right): 10 mm Adjustment range of vertical spindles below table: 40 mm Adjustment range of horizontal spindles (axial): 30 mm Straightening table length: 2 m Sale on behalf of customer, ex location Upper Austria, without dismantling, transport, or installation Errors in description and price excepted Dismantling, transport, and loading by us possible as an option To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale is as-is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale No warranty is provided for used machinery; sale is "as inspected" Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Delivery terms: ex location

Stanje: delavnici obnovljeno (rabljeno), Orodjarska rezkalna stroj: Deckel Tip: FP 2 Stanje: Geometrično obnovljena, rabljena Leto izdelave: 1980. leta, geometrijska obnova 2026 Tehnični podatki: Pomiki X/Y/Z, pribl.: 400 / 200 / 400 mm Vpenjalo za orodje: S20 Obrati: (18) 40 - 2000 min-1 Pomiki: (18) 8 - 400 mm/min Nagibna glava: 180° Hsdozcdarjpfx Adrefh Oprema: - Nova 3-osna digitalna merilna naprava - Nova zaščita vretena z končnim stikalom - Nova strojna razsvetljava - Horizontalno in vertikalno vreteno - Fiksna kotna miza - Naprava za hlajenje - Posoda za ostružke

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, obratovalne ure: 1 h, Oprema: hidravlika, For sale is a professional bema 20 sweeper in absolutely top condition. The machine was sourced through the renowned specialist dealer MAUCH. Ideal for year-round use in commercial, municipal, or agricultural sectors. ️Technical data Model / Type: bema 20 / bema 20 Dual Working width: 1550 mm Sweeping roller: 520 mm with infinitely variable roller adjustment (spindle adjustment standard on Dual version) Brush material: High-quality mixed bristle (ST, SW, 3R, SB) – perfect for dirt and light snow applications. Hfedpfx Adszbuqfsrsh Attachment / Mounting: WEIDEMANN ZBH EF & forklift fork attachment (Part no. 34490861) – extremely versatile for use on yard loaders or forklifts! Drive: Powerful hydraulic gerotor motor (heavy-duty series, 32 mm drive shaft). Level compensation: Integrated 3D floating compensation for optimal ground adaptation and perfect sweeping results. Accessories: Includes loose hydraulic parts and original bema accessories. Commercial sale by Fischer Bau GmbH. The stated price is a gross price (incl. 20% VAT). You will receive a proper invoice with VAT shown separately. Inspection by appointment in Weissenbach 153, 8967 Haus im Ennstal. Legal & Sales Conditions: The sale is carried out in the name of Fischer Bau GmbH. Price: The stated price is a gross price (incl. 20% VAT). You will receive a proper invoice with VAT shown separately. Exclusion of liability: This offer is intended exclusively for businesses (B2B). The sale is carried out with complete exclusion of any warranty, guarantee, and liability for material defects. Sale to private individuals (B2C) is excluded.

Stanje: rabljeno, Rabljeni stroj Godina proizvodnje: 2004 Oprema i tehnički podaci: - Radni sati: cca 5000 - Širina blanjanja: 230 mm - Visina blanjanja: 120 mm - Broj vretena: 6 - Donja vretena: 2 - Desno vreteno: 1 - Lijevo vreteno: 1 - Gornja vretena: 2 - Raspored vretena: dolje / desno / lijevo / gore / gore / dolje - Snaga motora u kW: 11 / 7,5 / 7,5 / 11 / 11 / 11 - Maks. broj okretaja vretena: 6800 o/min - Promjer vretena: 40 mm - Posmak: maks. 30 m/min - Posmak: beskonačno podesiv - Posmak: 4 kW - Glavni motor: 11 kW - Predrezni glodalo - Površina stola kromirana Hfjdpfjyxyauex Adroh - Duljina ulaznog stola: 2000 mm - Stolni valjci pogonjeni - Pumpa za klizno sredstvo: ručna - Pritisak odozgo: pneumatski - Pogon: transportni valjci kardanski - Ukupna priključna snaga: 80 kW - Dimenzije: 4100 x 2050 x 1900 mm Stroj se nudi bez alata, isti se mogu nabaviti kao rabljeni alati. Dostupnost: kratkoročno Lokacija skladišta: Röllbach

Stanje: delavnici obnovljeno (rabljeno), Number of spindles: 6 pcs. Working width: 230 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min Total power requirement: 27 kW Dimensions (L/W/H): 3900 x 2200 x 2000 mm Machine weight approx.: 2500 kg Weinig four-sided planer Profimat 23 window version with glazing bead separation or can be used as a grooving spindle. ATS control and program control ----- In 2024, the machine was factory-refurbished by Weinig. Technical data summary (possibly including additional accessories – please inquire) General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs. > Planer table length: 2500 mm Hodpfx Adexpn T Uerofh > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically activated up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glazing bead saw, pneumatic up/down Spindle specifications ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional features ----- > Glazing bead separation or usable as grooving unit > ATS control, automatic 2-axis positioning for width and height (left and top spindle) with memory for 99 programs > Machine operation: window package Combined control of the right spindle and glazing bead separator via manual selector switch on the control panel > Spindles with mechanical digital display (technical data as per manufacturer – subject to confirmation!)

Stanje: delavnici obnovljeno (rabljeno), Število vreten: 8 kos Delovna širina: 230 mm Višina skobljanja: 120 mm Weinig skobljalna linija Hfjdpfx Ajxpn Tuodreh ----- Sestavljeno iz naslednjih posameznih strojev: Poz. 1: Weinig Profimat 23 E, štiristranski skobeljni stroj, številka zaloge: 2803 5 vreten + žaga za steklene letve Poz. 2: Weinig Uniplan 23, številka zaloge: 2804 Fini in hidro skobeljni stroj z 2 horizontalnima vretenoma Poz. 3: Weinig RF 15, številka zaloge: 2805 Vzdolžno-prečno-vzdolžni transporter z vračanjem obdelovanca k operaterju Podrobni opisi strojev so na voljo pod navedenimi številkami zaloge. (Tehnični podatki po navedbah proizvajalca, brez jamstva!)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, Number of spindles: 5 units Working width: 230 mm Planing height: 120 mm Surface table length: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min Control system: Memory function Weinig Powermat 600 Compact ----- The machine has been cleaned and fully inspected. Brief summary: ----- Hsdpfx Aewzmu Rsdrofh - 5 spindles - Powerful motors - Left and top spindle controlled for width and height Detailed description: ----- Technical specifications: Working width: 20-230 mm Working height: 10-120 mm Number of spindles: 5 1st spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool flight circle: 125 - 145 mm Tool flight circle for rebate cutter: 130 - 160 mm Axial adjustment range: 5 mm Rebating device MarathonCoatin (coating) for table insert in front of the 1st lower tool seat Electronic digital display for radial adjustment 2nd spindle - right ----- Motor with brake: 11.0 kW Shared motor with left tool seat Spindle diameter: 40 mm Speed: 6,000 rpm Tool flight circle 40 mm below table level: 93 - 200 mm Tool flight circle 55 mm below table level: 93 - 180 mm Tool flight circle for straight knife heads max.: 163 mm Max. tool diameter behind fence plane: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm 3rd spindle - left ----- Motor with brake: Shared motor with 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool flight circle 40 mm below table level: 93 - 200 mm Tool flight circle 55 mm below table level: 93 - 180 mm Tool flight circle for straight knife heads max.: 163 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm Spindle radial CNC-controlled 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool flight circle: 93 - 200 mm Tool flight circle for straight knife heads max.: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 40 mm Spindle radial CNC-controlled Segmented pressure shoe in front of top tool seat, adjustable to tool flight circle and swing-away from tool, spring-loaded. Pressure shoe before and extraction after the top spindle with electronic digital displays, integrated in the memory function or PowerCom 5th spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool flight circle: 93 - 200 mm Max. profiling depth: 15 mm Axial adjustment range: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Feed roller in front of 1st lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment travel of the feed rollers relative to left tool seat, axial 35 mm Machine electrics ----- Operating voltage 400 V (range 380 - 420 Volt), 50 Hz. All spindles IE 2 design Electrical configuration according to DIN VDE 0113, electrical equipment for industrial machinery EN60204, IEC-204-1. Additional electrical regulations are not considered. Machi...

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2017, Number of spindles: 5 pcs. Working width: 240 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Weight: approx. 3500 kg Control: SCM Control 10 SCM Superset NT with workpiece return ----- Machine fully checked. Brief summary: ----- - 5 spindles - Powerful motors - Left and top spindle electronically controlled for width and height - With workpiece return to the operator 1st spindle ----- First lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick clamping system 3rd spindle ----- First left vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick clamping system Electronic horizontal positioning / motorised width adjustment 4th spindle Hedpfx Adowwl Nlerefh ----- First top horizontal spindle Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick clamping system Electronic radial positioning / motorised height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm SCM Control 10 user interface Including workpiece return Including used planer heads as available. (Technical specifications according to manufacturer – no guarantee!)

Stanje: delavnici obnovljeno (rabljeno), Število vreten: 5 kosov Delovna širina: 20 - 230 mm Višina obdelave: 8 - 120 mm Dolžina mizice za poravnavo: 2000 mm Pogonski motor pomika: 1,1 kW Hitrost pomika brezstopenjsko nastavljiva: 2 - 12 m/min Krmiljenje z memorijsko funkcijo 1 WEINIG skobeljni in utorni avtomat VARIOMAT z večnamensko/utorno mizo ----- Stroj bo pred dobavo očiščen in funkcijsko preizkušen Tehnični opis proizvajalca: ----- Delovna širina: 20 - 230 mm Delovna višina: 8 - 120 mm 1. vreteno vodoravno spodaj ----- Motor z zavore: 5,5 kW Premer: 40 mm Hitrost vrtenja: 6000 obr/min Delovni premer orodja: 125 - 145 mm Osni pomik: 5 mm Falc napeljava vklj. s falc frezom MarathonCoating za mizni vložek pred in za prvo spodnjo vreteno 2. vreteno navpično desno ----- Motor z zavoro: 11 kW Skupni motor z levim navpičnim vretenom Premer: 40 mm Elektronsko nastavljiva hitrost: 3000 - 6000 obr/min (za 11 kW/15 KM) Delovni premer orodja za vzdolžno obdelavo: 93-232 mm Minimalni premer orodja v ravnini prislona: 93 mm Maksimalni premer orodja za prislonom: 180 mm Maksimalna globina profiliranja: 45 mm Osni pomik: 30 mm Vložni segment, vklj. dodatni prislon 125 mm Vložni segment, vklj. dodatni prislon 150 mm 3. vreteno navpično levo POWERLOCK/HSK ----- Skupni motor s 1. desnim vretenom PowerLock – vpenjanje orodja Skupna hitrost z desnim navpičnim vretenom Delovni premer orodja za vzdolžno obdelavo: 93-232 mm Maksimalna globina profiliranja: 45 mm Minimalna globina profiliranja pri 200 mm del. premeru: 20 mm Hedpfx Adowugpborofh Osni pomik pod mizo: 30 mm Vložni segment 125 mm Vložni segment 150 mm 4. vreteno vodoravno zgoraj ----- Motor z zavoro: 5,5 kW Premer: 40 mm Hitrost vrtenja: 6000 obr/min Delovni premer orodja: 125-200 mm Maksimalna globina profiliranja: 30 mm Minimalna globina profiliranja pri 200 mm del. premeru: 20 mm Osni pomik: 30 mm Odliv letev po zgornjem vretenu 5. vreteno drugo vodoravno spodaj ----- Motor z zavoro: 4 kW Premer: 40 mm Hitrost vrtenja: 6000 obr/min Delovni premer orodja: 125-200 mm Maksimalna globina profiliranja: 15 mm Osni pomik: 10 mm Upravljanje stroja ----- Obe osi vseh vreten – razen 1. spodnjega vretena – opremljeni z mehanskimi digitalnimi prikazi. Centralno radialno nastavljanje z mehanskim digitalnim prikazom pomika skupaj s pritisnim valjem pred zgornjim vretenom. Pritisni valj za zgornjim vretenom nastavljiv ločeno. Memorijska funkcija ----- Za shranjevanje nastavitvenih vrednosti profilov Osi vpenjanja orodij in pritisni elementi pred in za zgornjim vpenjalom orodja z elektronskim dvojnim prikazom: Funkcija: - Shranjevanje nastavitvenih vrednosti izdelanega profila s pritiskom na gumb pod številko profila - Ponovni izbor številke profila prikaže nastavitvene vrednosti na elektronskem dvojnem prikazu - Ročno nastavljanje vpenjal orodij in pritisnih elementov uskladi prikaze - 99 mest za shranjevanje 3-osna CNC vodeno nastavljanje in pozicioniranje vretena v povezavi z memorijsko funkcijo. Za vretena št. 2, 3, 4 3 radialna CNC-g...

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2010, Število vreten: 6 kosov Delovna širina: 230 mm Višina glajenja: 120 mm Dolžina mizne površine: 2500 mm Podajalna hitrost: 5-25 m/min Dimenzije (dolžina/širina/višina): 4700/1800/1100 mm Teža: pribl. 4000 kg CASOLIN MEGA 230/6 štiristranska skobeljnica 6 vreten s krmiljenjem preko zaslona na dotik. Hodewmggkopfx Adrofh Širina in višina sta nastavljivi. Razporeditev vreten: 1. vreteno: spodaj, premer 40 mm, 6000 obr/min, 5,5 kW 2. vreteno: desno, premer 40 mm, 6000 obr/min, 11 kW skupaj z 3. vreteno: levo, premer 40 mm, 6000 obr/min 4. vreteno: zgoraj, premer 40 mm, 6000 obr/min, 7,5 kW 5. vreteno: spodaj, premer 40 mm, 8000 obr/min, 5,5 kW 6. vreteno: zgoraj, premer 40 mm, 8000 obr/min, 5,5 kW Stroj brez obdelovalnih orodij. Dodatni zaslon na čelni strani stroja ni priložen (pripada liniji za okna). Stroj je že demontiran in skladiščen. (Tehnični podatki po navedbah proizvajalca - brez jamstva!)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Number of spindles: 5 pcs Working width: 250 mm Planing height: 160 mm Length of surfacing table: 2500 mm Feed motor: 4 kW Feed speed: 6-24 m/min Controller: K2 Basic 7" touch screen KUPER SWT XL-5 AUTOMATIC MOULDER AND PLANER ----- AS NEW, DEMO MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 – 6,000 rpm, spindle 4.5 up to 8,000 rpm - Width and height positioned by motor: left spindle radial upper spindle axial - Feed carriage positioned by motor - Additional motorised positioning: right spindle radial and axial left spindle axial - Working width: 250 mm DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125-163 mm): 15 – 230 mm Working height (with tool diameter 125 mm): 10 – 160 mm (tool diameter up to 163 mm): 10 – 160 mm Min. workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm Machining of workpieces depends on the following operating parameters: Material, wood moisture, tooling, cutting depth taken off, and feed speed. Adjustments to operating parameters may be required if necessary. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable tool length: spindle length minus approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 125–160 mm Rabbetting device: diameter difference 20–25 mm to planing head Important: unit cannot be operated without jointing rabbet cutter Extraction nozzle D = 125 mm Tool clamping system: quick-change nut "Pro-Lock" Hsdpfx Aewgwmnedrjfh 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Table plate adjustable to tool radius Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-change nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Standard profile depth: 20 mm Table plate adjustable to tool radius Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-change nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 112–200 mm Pressure shoe: pneumatic, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-change nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter...

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Number of spindles: 5 pcs. Working width: 230 mm Planing height: 160 mm Jointing table length: 2500 mm Feed motor: 4 kW Feed speed: 6–24 m/min Control: K2 Basic 7" touch screen KUPER SWT XL-5 AUTOMATIC PLANING AND MOULDING MACHINE Hfsdpfx Adswgwmhoreh ----- LIKE NEW, DEMONSTRATION MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000–6,000 rpm - Width and height are motor-positioned: left spindle: radial upper spindle: axial - Feed carriage motor-positioned DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125–163 mm): 15–230 mm Working height (with tool diameter 125 mm): 10–160 mm (with tool diameter up to 163 mm): 10–160 mm Min. workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm Machining of workpieces depends on the following operating parameters: Material, wood moisture, tools, chip removal diameter, and feed speed. Adjustments to operating parameters may be necessary. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable length for tools: spindle length minus approx. 6 mm Speed, frequency-controlled: 4000–6000 rpm Tool diameter: 125–160 mm Grooving device: diameter difference 20–25 mm to planing head Important: The system cannot be operated without jointing cutter Extraction nozzle D = 125 mm Tool clamping system: quick clamping nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length: spindle length minus approx. 6 mm Speed, frequency-controlled: 4000–6000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Table plate adjustable to tool radius Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick clamping nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length: spindle length minus approx. 6 mm Speed, frequency-controlled: 4000–6000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Standard profile depth: 20 mm Table plate adjustable to tool radius Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick clamping nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length: spindle length minus approx. 6 mm Speed, frequency-controlled: 4000–6000 rpm Tool diameter: 112–200 mm Pressure shoe: pneumatic, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick clamping nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length: spindle length minus approx. 6 mm Speed, frequency-controlled...

Stanje: delavnici obnovljeno (rabljeno), Število vreten: 6 kos Delovna širina: 230 mm Višina skobljanja: 160 mm Dolžina poravnalne mize: 1050 mm Pogonski motor podajanja: 7 kW Hitrost podajanja: 6–40 m/min Krmiljenje: MemoryPlus Weinig Powermat 1200 ----- z vhodno avtomatizacijo Weinig Radmagazin EM 100, povezano z izhodno avtomatizacijo Weinig High-Mech A 1 Stroj je pri nas na zalogi in bo pred dostavo popolnoma obnovljen! Podroben opis: ----- 1. Weinig skobelni in profilirni avtomat Powermat 1200 ----- Tehnični podatki: ----- Delovna širina: 20–230 mm (pri krožnem rezu orodja 93–163 mm) Delovna višina: 10–160 mm (pri krožnem rezu orodja 93–163 mm) 1. vreteno ----- Prvo spodnje horizontalno vreteno Motor z zavoro 7,5 kW Premer vretena 50 mm Število obratov 8.000 min⁻¹ Krožni rez orodja: 125–180 mm S PowerLock: 93–180 mm Krožni rez za utorni rezkar: 130–160 mm Axialni pomik: 17 mm Utornica MarathonCoating pred 1. spodnjim držalom orodja 2. vreteno ----- Prvo desno vertikalno vreteno Motor z zavoro 7,5 kW Premer vretena 50 mm Število obratov 8.000 min⁻¹ Krožni rez orodja: 93–200 mm Največja profilna globina: 35 mm Axialni pomik: 80 mm Radialni pomik Min. premer orodja na referenčni ravnini: 93 mm Maks. premer orodja za referenčno ravnino: 200 mm 3. vreteno ----- Prvo levo vertikalno vreteno Motor z zavoro 7,5 kW Premer vretena 50 mm Število obratov 8.000 min⁻¹ Krožni rez orodja: 93–200 mm Za ravne nožaste glave max. 163 mm Največja profilna globina: 35 mm Axialni pomik: 80 mm Tlačni čevelj pred levo držalo orodja, vklj. z 2 stranskima tlačnima valjema, vzmeten 4. vreteno ----- Prvo zgornje horizontalno vreteno Hedpfsvnwbcsx Adrofh Motor z zavoro 7,5 kW Premer vretena 50 mm Število obratov 8.000 min⁻¹ Krožni rez orodja: 93–200 mm Za ravne nožaste glave max. 163 mm Največja profilna globina: 35 mm Axialni pomik: 40 mm Deljeni tlačni čevelj pred zgornjim držalom orodja na krožnem rezu orodja nastavljiv in odklopljiv od orodja, vzmeten. Zgornje vreteno pripravljeno za kasnejšo namestitev kasetnega sistema. 5. vreteno ----- Drugo zgornje horizontalno vreteno Motor z zavoro 7,5 kW Premer vretena 50 mm Število obratov 8.000 min⁻¹ Krožni rez orodja: 93–200 mm Za ravne nožaste glave max. 163 mm Največja profilna globina: 35 mm Axialni pomik: 40 mm Deljeni tlačni čevelj pred zgornjim držalom orodja na krožnem rezu orodja nastavljiv in odklopljiv od orodja, vzmeten. Zgornje vreteno pripravljeno za kasnejšo namestitev kasetnega sistema. 6. vreteno ----- Drugo spodnje horizontalno vreteno Motor z zavoro 7,5 kW Premer vretena 50 mm Število obratov 8.000 min⁻¹ Krožni rez orodja: 93–225 mm Največja profilna globina: 15 mm Axialni pomik: 40 mm Radialni pomik Min. premer orodja do ravnine mize: 93 mm Maks. premer orodja 6 mm pod ravnino mize: 225 mm Vsa vretena z visoko natančnostjo kroženja. Mazalna mesta za aksialno pomikanje držala orodja. Podajalni sistem ----- Elektronski podajalnik, brezstopenjsko nastavljiv z zavoro 6- ...

Stanje: delavnici obnovljeno (rabljeno), Število vreten: 6 kosov Delovna širina: 230 mm Višina oblanja: 120 mm Dolžina vstopne mize: 2500 mm Motor podajalnika: 4 kW Hitrost podajanja: 5-30 m/min Krmiljenje: spominska funkcija Weinig Powermat 400 s HSK/Powerlock, aksialno/radialno CNC vodena Hedjuzaa Sepfx Adrofh ----- Stroj je prenovljen in preizkušen za delovanje! Kratek povzetek: ----- 6 vreten s 8.000 vrt/min 5x HSK/Powerlock Aksialno in radialno CNC nastavljanje vreten preko krmiljenja CNC vodeno nastavljanje in pozicioniranje podajanja Podroben opis: ----- Tehnični podatki: Delovna širina: 20-230 mm Delovna višina: 8-120 mm Število vreten: 6 1. Nosilec orodja – spodaj ----- Motor z zavoro: 5,5 kW Premer vretena: 40 mm Hitrost: 6.000 vrt/min Premer kroga orodja: 93 - 160 mm Aksialni pomik: 5 mm Oprema za utore MarathonCoating za mizni vložek pred 1. spodnjim nosilcem orodja 2. Nosilec orodja – PowerLock – desno ----- Motor z zavoro: 11,0 kW Skupni motor z levim nosilcem orodja Hitrost vključno z visoko zmogljivim ležajem: 8.000 vrt/min Premer kroga orodja 40 mm pod mizno ravnino: 93 - 200 mm Premer kroga orodja 55 mm pod mizno ravnino: 93 - 180 mm Premer kroga za ravne nože max.: 163 mm Max. globina utora: 35 mm Aksialni pomik: 55 mm Vreteno aksialno in radialno CNC vodeno 3. Nosilec orodja – PowerLock – levo ----- Motor z zavoro: skupni motor z drugim vretenom Hitrost vključno z visoko zmogljivim ležajem: 8.000 vrt/min Premer kroga orodja 40 mm pod mizno ravnino: 93 - 200 mm Premer kroga orodja 55 mm pod mizno ravnino: 93 - 180 mm Premer kroga za ravne nože max.: 163 mm Max. globina utora: 35 mm Aksialni pomik: 55 mm Vreteno aksialno in radialno CNC vodeno 4. Nosilec orodja – PowerLock – zgoraj ----- Motor z zavoro: 7,5 kW Hitrost vključno z visoko zmogljivim ležajem: 8.000 vrt/min Premer kroga orodja: 93 - 200 mm Premer kroga za ravne nože max.: 180 mm Max. globina utora: 35 mm Aksialni pomik: 40 mm Razdeljena pritisna čevelj pred zgornjim nosilcem orodja, nastavljiva na premer kroga orodja in odmakljiva od orodja, vzmetena. Vreteno radialno CNC vodeno 5. Nosilec orodja – PowerLock – zgoraj ----- Motor z zavoro: 7,5 kW Hitrost vključno z visoko zmogljivim ležajem: 8.000 vrt/min Premer kroga orodja: 93 - 200 mm Premer kroga za ravne nože max.: 180 mm Max. globina utora: 35 mm Aksialni pomik: 40 mm Razdeljena pritisna čevelj pred zgornjim nosilcem orodja, nastavljiva na premer kroga orodja in odmakljiva od orodja, vzmetena. Vreteno aksialno in radialno CNC vodeno 6. Nosilec orodja – PowerLock – spodaj ----- Motor z zavoro: 7,5 kW Hitrost vključno z visoko zmogljivim ležajem: 8.000 vrt/min Premer kroga orodja: 93 - 200 mm Max. globina utora: 15 mm Aksialni pomik: 35 mm Vreteno radialno CNC vodeno Podajalni sistem ----- Frekvenčno reguliran podajalnik, brezstopenjsko nastavljiv z br...

Stanje: pripravljen za uporabo (rabljen), Number of spindles: 6 pcs. Working width: 230 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 3 kW Feed speed: 5–24 m/min Total power requirement: 27 kW Dimensions (L/W/H): 3900 x 2200 x 2000 mm Machine weight approx.: 2500 kg Weinig Four-Sided Planer Profimat 23, window version with glass bead separation (can also be used as a grooving spindle) ATS control and program control ----- Machine is currently being overhauled and functionally tested Technical data summary (please ask for details on any additional included accessories) General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs. > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5–24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight approx.: 2500 kg Hodpeu Su Huefx Adrefh Spindle configuration ----- > Spindle 1: bottom > Spindle 2: right, pneumatically cycling up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glass bead saw, pneumatically cycling up/down Spindle specifications ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glass bead saw, 2.2 kW, 6000 rpm, 40 mm diameter Other features ----- > Glass bead separation or usable as a grooving device > ATS control: automatic 2-axis positioning for width and height (left and top spindle) with program memory for 99 programs > Machine operation: window package Joint operation of the right spindle and the glass bead discharge via manual selector switch on the control panel > Spindles with mechanical digital readout Option: Used planer heads available (technical data according to manufacturer – subject to prior sale and not guaranteed!)

Stanje: dober (rabljeno),

Stanje: rabljeno,

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 100 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: F9B192402, dolžina podajanja os X: 450 mm, dolžina pomika po osi Y: 350 mm, dolžina podajanja os Z: 400 mm, največja hitrost vretena: 5.000 obr/min, hod vretena: 80 mm, hitro pomikanje X-os: 5 m/min, hitri pomik os Y: 5 m/min, hitri pomik na osi Z: 5 m/min, skupna višina: 1.990 mm, skupna širina: 2.030 mm, skupna dolžina: 1.980 mm, širina mize: 270 mm, dolžina mize: 400 mm, vrsta vhodnega toka: trifazni, največja hitrost vrtenja: 5.000 obr/min, vrtljajska hitrost (min.): 10 obr/min, obremenitev mize: 450 kg, skupna masa: 2.270 kg, vhodna napetost: 400 V, teža obdelovanca (maks.): 450 kg, vhodni tok: 16 A, vhodna frekvenca: 50 Hz, Oprema: CE označba, dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, EMCOMAT FB-450 MC with Sinumerik 828D Path Control with “Manual Machine” Universal tool milling and drilling machine equipped with Sinumerik 828D path control and hydraulic tool clamping Working area X450/Y350/Z400mm Drive power 7/10 kW Speed range from 10–5000 rpm Feed rate from 10–5000 mm/min Hjdpfx Adjxapdcjrjfh Rapid traverse up to 5000 mm/min Machinist’s precision as per DIN 8615 Tool holder: DIN 69871 SK40 Includes: • Linear guides • Ball screw spindles • Vertical milling head, swivels +/-90°, with 80mm quill travel • Swivel-out device for vertical head • Hydraulic tool clamping • Coolant system • LED machine lamp • Fixed angle table 800x400mm • Work area guard incl. chip tray • Automatic central lubrication • Operating tools • Documentation • Machining with open door (Operating Mode 3) • Controlled and manual operation modes combined in one machine • Sinumerik 828D path control incl. control package for 3 axes with ball screws and servo motors, Process cycles with graphical user support: Drilling cycles for drilling, deep drilling, reaming, tapping (with length compensation) on bolt circles and linear hole patterns, rectangular and circular pockets, slot milling cycle, facing cycles, etc., USB interface

Stanje: rabljeno, prevoženi kilometri: 64.000 km, moč: 85 kW (115,57 KM), prva registracija: 12/2012, vrsta goriva: dizel, skupna masa: 3.500 kg, barva: rumena, vrsta prenosa: samodejen, emisijski razred: Euro 5, dolžina tovornega prostora: 4.350 mm, širina tovornega prostora: 2.050 mm, višina nakladalnega prostora: 2.070 mm, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, Iveco Daily 35S12 / Size: 2 - Maxi / VAT deductible. Net: €7,500 ---- For additional equipment/special features, see below: ---- Please no emails / no emails. Due to time constraints, emails cannot be processed. Thank you for your understanding! ---- Opening hours and further information: Viewing and purchase without appointment possible: MON - THU: 9:00 to 16:00 FRI: 9:00 to 13:00 SAT: 9:00 to 12:00 Address: Tabakried 11 84076 Pfeffenhausen For questions: Christian Hirsch Please try calling several times as we are often engaged in customer consultations. More offers at ---- TÜV & HU: NEW Full service history: yes Emissions standard: EURO 4 Environmental badge: green Previous owners: 1 -Reversing camera -LED interior lighting with motion sensor -Cargo area length: 4.35m -Cargo area width: 2.05m -Cargo area height: 2.07m Interior features: Cup holder, Power steering Exterior features: Sliding door, Electric & heated side mirrors, Central locking with remote control, Electric front windows Technology: Outside temperature display, On-board computer Safety & environment: Driver airbag, Electronic immobilizer, ABS, ESP, Traction control, Particulate filter Miscellaneous: Non-smoker vehicle Hfedpovh Svzjfx Adroh For questions: Christian Hirsch Please try calling several times as we are often engaged in customer consultations. Further offers at / Specifications determined via VIN check; technical errors may occur. Opening hours and further information: Viewing & purchase without appointment possible: MON - THU: 9:00 to 16:00 FRI: 9:00 to 13:00 SAT: 9:00 to 12:00 Address: Tabakried 11 84076 Pfeffenhausen Germany ---- All information provided online is a non-binding description. They do not represent warranted characteristics. The seller is not liable for typing/errors in data transmission / changes / input errors. Subject to errors and prior sale. For questions: Christian Hirsch Please try calling several times as we are often engaged in customer consultations. Further offers at / Specifications determined via VIN check; technical errors may occur. ---- Further offers at / Further offers at / Specifications determined via VIN check; technical errors may occur. All information provided online is a non-binding description. They do not represent warranted characteristics. The seller is not liable for typing/errors in data transmission / changes / input errors. Subject to errors and prior sale.