Preklopni tisk - en stolpec

BERG & SCHMID HK 500

Stanje: novo, Pressure: 8.5 kN Stroke: 40 mm Gujdpfx Asfv Awaeb Eoh Throat depth: 95 mm Working height from/to: 95 - 240 mm Table surface: 160 x 110 mm Spindle diameter: 25 mm Machine weight: approx. 27 kg Dimensions (L x W x H): 160 x 230 mm Direct-acting pneumatic presses deliver the full pressing force throughout the entire stroke length. They are used primarily when long-stroke parts need to be processed with consistent force. Outstanding Engineering: • Long and precise spindle guidance for maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life • Double-acting cylinder with end position cushioning on both sides • Double guide rings on the piston for constant, smooth operation • Oil-resistant sealing elements Special features of the PND series: • Spindle secured against rotation • Spindle return on PND 85/S via only one cylinder chamber – saves additional air • Working height fine adjustment is easy, fast and precise in 2 steps: – Basic adjustment by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limitation ring on the piston rod Additional advantage: Faster cycle times and air savings

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 680 kW (924,54 KM), Oprema: hladilna enota, Condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture: 2004 Rated capacity: 680.4 / 579.2 kW Gujdpfxjvllxdo Ab Ejh Refrigerant: R404 Refrigerant charge: 218.9 + 25 liters Flow rate: Temperature range: -50°C to +100°C Maximum pressure: Operating pressure: 28 bar / -1 bar (Capacity depends on usage parameters) Number of fans: 5, diameter 900 mm Air flow rate: 162,500 / 131,000 m³/h Fan motor power consumption: 17.60 / 11.50 kW Heat exchanger area² Operating noise: 52 dB Length: mm Height: mm Width: mm Weight: approx. kg The cooler has been technically inspected and is fully functional.

Stanje: novo, Pressure: 17.0 kN Stroke: 40 mm Throat depth: 110 mm Godpfx Asfv Avvob Esuh Working height (min–max): 70–220 mm Table size: 190 x 140 mm Spindle diameter: 30 mm Machine weight approx.: 60 kg Dimensions (L x W x H): 310 x 190 mm Toggle-lever pneumatic presses Including fine adjustment of working height via bevel gear and side crank — convenient and easy to set. Toggle-lever pneumatic presses are used when maximum pressing force is required just before the end of the stroke, e.g. for assembly, punching, embossing, riveting, etc.

Stanje: novo, Pressure: 2.5 kN Stroke: 45 mm Throat depth: 90 mm Working height (min.–max.): 80–220 mm Table size: 120 x 60 mm Machine weight: approx. 22 kg Dimensions (L x W x H): 160 x 230 x 390 mm Rack and Pinion Hand Press HZ 250 The force is transmitted via a rack and pinion system. It is used wherever constant pressure is required throughout the working process. Precisely manufactured; spindle hardened and ground; unlimited service life. Gujdpfx Aefv Av Isb Esh Long spindle guide, optimal pressing force. T-slot according to DIN 650, milled centrally, T-slot nuts fit precisely.

Stanje: novo, Pressure 1.5 kN Stroke 40 mm Throat Depth 70 mm Working Height from/to 75 - 170 mm Table Surface 115 x 70 mm Machine Weight approx. 11 kg Dimensions (L x W x H) 115 x 175 x 290 mm Rack and Pinion Hand Presses HZ 150 The force is transmitted via a rack-and-pinion mechanism. These presses are used where a constant pressure is required during the operation. Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressing performance, Gedjfv Av Dspfx Ab Esuh T-slot machined centrally according to DIN 650, T-slot nuts fit precisely.

Stanje: novo, Pressure: 34.0 kN Stroke: 40 mm Throat depth: 130 mm Working height (min. – max.): 80 – 240 mm Table size: 190 x 140 mm Gujdjfv Avyjpfx Ab Esh Spindle diameter: 30 mm Machine weight: approx. 80 kg Dimensions (L x W x H): 375 x 200 mm Toggle lever pneumatic presses Including fine adjustment of the working height via bevel gear with side-mounted handwheel, comfortable and easy to set. Toggle lever pneumatic presses are used when maximum pressing force is required just before the end of the stroke, e.g. for assembly, punching, embossing, riveting, etc.

Stanje: novo, Leto izdelave: 2026, Viličar za palete CORMAK WRHS 1610 je profesionalna naprava, ki omogoča hitro in učinkovito dvigovanje in transport težkih tovorov v skladiščih, proizvodnih halah in drugih delovnih prostorih. Zahvaljujoč napredni konstrukciji in visokokakovostnih komponentah zagotavlja viličar zanesljivost, učinkovitost in varnost. Njegova glavna prednost je velika nosilnost in višina dviga, zaradi česar je idealna rešitev za delo s paletami, vključno z viličarji za palete in viličarji za nakladanje palet. Glavne prednosti viličarja za palete WRHS 1610 Viličar WRHS 1610 je naprava, zasnovana za zahtevne uporabnike. Odlikuje ga robustna konstrukcija, velika nosilnost in funkcionalnost, zaradi česar je nepogrešljiv pri vseh skladiščnih opravilih. V nadaljevanju predstavljamo ključne prednosti uporabe tega viličarja: * Visoka nosilnost: Nosilnost do 1000 kg omogoča, da se viličar odlično uporablja za transport težkih palet in tovorov velikih dimenzij. * Višina dviga: Zahvaljujoč višini dviga do 1600 mm omogoča viličar enostavno shranjevanje blaga na skladiščnih regalih, kar optimizira izrabo prostora. Gujdpfxsricgas Ab Eoh * Poliuretanski kolesa: Visokokakovostna poliuretanska kolesa zagotavljajo gladko vožnjo, tiho delovanje in dolgotrajno vzdržljivost, tudi v težkih skladiščnih pogojih. * Ergonomična konstrukcija: Steber viličarja in ročaj sta zasnovana z mislijo na udobje uporabnika, kar omogoča enostavno upravljanje in zmanjšuje tveganje za poškodbe. * Vzdržljivost in stabilnost: Robustna jeklena konstrukcija stebra zagotavlja stabilnost med dvigovanjem in spuščanjem tovorov, kar zagotavlja zanesljivost in varnost pri delu. Konstrukcija in tehnologija viličarja za palete WRHS 1610 Viličar za palete WRHS 1610 je izdelek, ki združuje visoko kakovost izdelave z modernimi tehnološkimi rešitvami. V nadaljevanju so podrobnosti o njegovi konstrukciji: * Steber: Steber viličarja je izdelan iz visokokakovostnega jekla in je zelo odporen na mehanske poškodbe. Zagotavlja stabilnost, zato se tovor varno transportira. * Kolesa in valjčki: Viličar je opremljen s poliuretanskimi kolesi premera 180 x 50 mm in valjčki vilic dimenzij 74 x 70 mm, ki zagotavljajo tiho in stabilno vožnjo po različnih površinah. * Ergonomičen ročaj: Ročni ročaj viličarja WRHS 1610 je zasnovan z mislijo na udobje operaterja, kar olajša manevriranje z viličarjem, tudi v ozkih skladiščnih hodnikih. * Dve možnosti dvigovanja: z nogo in ročno. * Neskonajčna nastavitev hitrosti spuščanja vilic. * Zaklepanje viličarja, zavora na obeh krmilnih kolesih. Tehnične specifikacije Nosilnost: 1000 kg Višina dviga: 1600 mm Dimenzije vilic (D x Š): 1150 x 145 mm Zunanja širina vilic: 550 mm Širina med vilicami: 230 mm Višina s spuščenimi vilicami: 1970 mm Višina z dvignjenimi vilicami: 1970 mm Minimalna višina vilic: 90 mm Skupna dolžina: 1630 mm Skupna širina: 740 mm Polmer obračanja: 1400 mm Krmilna kolesa: 180 x 50 mm Valjčki vilic: 74 x 70 mm Teža: 181 kg

Stanje: rabljeno, Leto izdelave: 1995, Jaw width: 200 mm Weight: approx. 50 kg Space requirement approx.: 700 x 300 x 170 mm Fully hydraulic machine vice with 3-stage clamping range adjustment, in very good condition. The vice is equipped with an additional, laterally mounted hydraulic connection to support parallel clamping. Clamping range 1: 0 - 120 mm Clamping range 2: 110 - 235 mm Clamping range 3: 225 - 350 mm Gedpfx Abocxxm Dj Eeuh Accessories: 1 clamping jaw with 200 mm jaw width and 65 mm jaw height 1 prism clamping jaw with 200 mm jaw width and 90 mm jaw height

Stanje: novo, Pressure 4.5 kN Stroke 40 mm Throat depth 95 mm Working height from/to 95 - 240 mm Table size 160 x 110 mm Spindle diameter 25 mm Machine weight approx. 24 kg Dimensions L x W x H 160 x 230 mm Direct-acting pneumatic presses deliver full pressing force over the entire stroke length. They are predominantly used when long-stroke components must be processed with consistent force. Superior Engineering • Long and precise spindle guidance for maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life • Double-acting cylinders with end position damping on both sides • Double guide rings in the piston, ensuring smooth and consistent operation • Oil-resistant sealing elements Special features of the PND series • Spindle rotation protection Godpfx Asfv Av Seb Eeuh • With PND 85/S, spindle return only via one cylinder chamber – additional air savings • Simple, fast and precise adjustment of working height in 2 stages: – Basic setting by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limit ring on the piston rod Additional advantage: Faster cycle times and reduced air consumption

Stanje: rabljeno, Jaw width: 160 mm Gusdpfxjcxxnze Ab Eoh Space requirement approx.: 0.40 x 0.27 x 0.20 m - 2 axes swivelling 360°/60° - Clamping range 150-180 mm - Multiple models and sizes in stock