Pnevmatske stiskalnice

BERG & SCHMID PND 45/S

Stanje: novo, Pressure: 8.5 kN Stroke: 40 mm Throat depth: 95 mm Working height from/to: 95 - 240 mm Table surface: 160 x 110 mm Spindle diameter: 25 mm Machine weight: approx. 27 kg Dimensions (L x W x H): 160 x 230 mm Direct-acting pneumatic presses deliver the full pressing force throughout the entire stroke length. They are used primarily when long-stroke parts need to be processed with consistent force. Outstanding Engineering: • Long and precise spindle guidance for maximum dimensional accuracy Djdpfx Aofv Awajnuecn • Hardened and ground piston rod for virtually unlimited service life • Double-acting cylinder with end position cushioning on both sides • Double guide rings on the piston for constant, smooth operation • Oil-resistant sealing elements Special features of the PND series: • Spindle secured against rotation • Spindle return on PND 85/S via only one cylinder chamber – saves additional air • Working height fine adjustment is easy, fast and precise in 2 steps: – Basic adjustment by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limitation ring on the piston rod Additional advantage: Faster cycle times and air savings

Stanje: dober (rabljeno), Leto izdelave: 2008, dolžina podajanja os X: 400 mm, dolžina pomika po osi Y: 250 mm, dolžina podajanja os Z: 400 mm, Heidenhain TNC 124 control Quill electronic handwheel coolant system Technical data: Longitudinal travel (X-axis): 400 mm Cross travel (Y-axis): 250 mm Vertical travel (Z-axis): 400 mm Table clamping area: 600 x 320 mm Spindle taper: SK40 Dsdpfx Anjrb A Tceuecn Spindle speed range: 30–6300 rpm Feed rate x, y, z: 10, 10, 8 m/min Total drive capacity: 6.5 kW Weight approx.: 1200 kg Technical data, accessories, and description of the machine are non-binding.

Leto izdelave: 2023, stanje: novo, We are selling a new double belt grinding machine. The contact wheels are available in various dimensions. Technical data: Weight: approx. 350 kg Electrical connection: see nameplate of the respective drive motor Compressed air connection: 3 - 8 bar Dcedpfx Anek D Ex Tjujn Noise level: > 85 dB(A) Contact wheels: max. Ø 350 mm x 110 mm Abrasive belts: max. 120 mm x 3500 mm length Extraction connection: Ø 160 mm If you have any further questions, please feel free to contact us!

Stanje: rabljeno, Leto izdelave: 1996, Pressure: 80 t Outreach: 320 mm Stroke: 6 - 118 mm Strokes per minute: 30 - 80 spm Ram adjustment: 70 mm Table surface: 830 x 610 mm Ram surface: 650 x 400 mm Gap depth (to rear): 630 mm Total power requirement: kW Machine weight approx. 8.1 t Space requirement approx. W 1.2 x D 1.9 x H 3.3 m Equipment: - with gear-driven wheels - fixed table - automatic stroke adjustment - automatic ram adjustment - hydraulic overload protection - ejector - central grease lubrication - cover plate for drop-through hole Dcodotycdkopfx Anujn - stepless speed control via frequency converter - The machine will be mechanically inspected and overhauled in our facility, and will receive a new control cabinet with safety control and touchscreen - Current UVV inspection with braking time measurement

Stanje: novo, minimalni premer metričnega navoja: 3 mm, največji premer metrickega navoja: 16 mm, skupna masa: 500 kg, dolžina podajanja os X: 3.000 mm, dolžina pomika po osi Y: 1.500 mm, dolžina podajanja os Z: 200 mm, vrtilni moment: 24 Nm, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 50 obr/min, moč: 0,005 kW (0,01 KM), The CMA 3-axis controlled tapping center is designed, among other things, for post-processing of laser-cut sheet metal parts and complete machining of, for example, small parts and tubes. The machine offers the following machining capabilities: Dcjdpfx Anerbz T Njuen - Tapping - Drilling (standard / with chip breaking / tube drilling cycle) - Countersinking - Flow drilling (with optimized feed curve) - Reaming - Simple graphical programming - Import of 2D DXF or DWG files - Machine table according to System 28 (similar to e.g., Demmeler and Siegmund welding tables) - Radial tool compensation via patented tool holder (accessory) - Tool probe for length measurement and as a breakage detector - Intuitive safety system using light barriers Standard version: Automatic tool changer with 10 positions, mounted on the machine gantry

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Pressure: 25 tons Outreach: 160 mm Installation height: 500 mm Table surface: 650 x 650 mm Ram surface (round): 140 mm Stroke: 130 mm Power requirement: 4 kW Dcsdpfxsfcw Aps Anuon Weight: 2,000 kg Height: 2,100 mm Width: 1,100 mm Depth: 1,500 mm

Stanje: dober (rabljeno), Leto izdelave: 2006, številka stroja/vozila: 860027, Offer 24331 Technical Data: Dcsdpfx Aju Aq Amjnusn - Table surface: 1700 x 550 mm - Manual travel paths X / Y: 1300 x 500 mm - Drilling machine manufacturer: MAXION, Model: BT 18 STP - Drilling capacity up to: 18 mm - Tapping capacity up to: M16 - Drill spindle taper: MK 2 - Drill spindle stroke with fine depth adjustment: 76 mm - Pneumatic feed unit: PV 12 - Throat depth: 670 mm - Spindle speeds: 100 - 1800 rpm, 200 - 3600 rpm - Motorized movement of the drilling unit - Motorized table clamping in X + Y - Minimum quantity lubrication - Pneumatic connection: 6 bar - Electrical connection: 400 V - Required space: approx. W 1750 x H 1600 x D 1000 mm - Weight: approx. 1200 kg

Stanje: novo, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table size: 520 x 400 mm Strokes per minute: 160 spm Continuous operating capacity: 1370 Nm Single stroke capacity: 2740 Nm Stroke adjustment: 4 - 80 mm Ram adjustment: 40 mm Ram surface: 160 x 160 mm Table through-hole: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Table through-hole: 80 mm Machine weight approx. 1.9 t - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication system - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch Dedpeb U Hwnsfx Anuecn

Stanje: novo, Pressure: 17.0 kN Stroke: 40 mm Throat depth: 110 mm Working height (min–max): 70–220 mm Table size: 190 x 140 mm Dodpsfv Avvsfx Anuecn Spindle diameter: 30 mm Machine weight approx.: 60 kg Dimensions (L x W x H): 310 x 190 mm Toggle-lever pneumatic presses Including fine adjustment of working height via bevel gear and side crank — convenient and easy to set. Toggle-lever pneumatic presses are used when maximum pressing force is required just before the end of the stroke, e.g. for assembly, punching, embossing, riveting, etc.

Leto izdelave: 2017, obratovalne ure: 30 h, stanje: kot nova (razstavni stroj), Maximum strip thickness: 4 mm Strip width: 300 mm Repeat accuracy: +/- 0.05 mm Dsdpfx Aneb Nbgljuecn NC drive with compact controller Feed force: 3000 N (300 kg) Maximum strip pressing force: 1.2 t