Preklopni tisk - en stolpec

BERG & SCHMID PNK 1700

Stanje: rabljeno, Used 3D printer EOSINT M 270, low operating hours (4,910) Ijdpfxswd Ulvj Al Nsia

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, številka stroja/vozila: 06 61 218, Ref. No.: Lg 32821 Single-Sided Decoiler BBT ABH 2000/400 Exhibition machine, unused Machine No.: 06 62 218 Year of manufacture: 2021 Technical Data Load capacity approx.: max. 2,000 kg Iijdpfx Alsg U Utvj Noa Strip width: max. 400 mm Inner coil diameter: approx. 450 to 520 mm Outer coil diameter: max. 1,500 mm Unwinding speed: approx. 2 to 15 rpm Equipped with adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase gear motor. Expansion of carrying segments manually via hand crank and joints Number of carrying segments: 3 Coil lateral guidance achieved by robust, lockable boundary arms. Decoiler stand constructed in heavy-duty box design, fabricated as welded assembly. Additional Equipment: Shutdown for "loop too small" via antenna switch, mounted on the column of the base housing of the loop control. Height infinitely adjustable. Strip side guide on the base housing of the loop control, via lateral guide rods. Pass-through width infinitely adjustable.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 25.181 h, Funkcionalnost: popolnoma funkcionalen, OPREMA: Sinhronsko vreteno Pogonska orodja Iodpfx Aeyk A Uksl Noia C-os Obdelava zadnje strani Transportni trak za dele Magazin za podajalnik palic FMB Turbo Transporter za odrezke

Stanje: rabljeno, Leto izdelave: 1993, številka stroja/vozila: 931200665, Packaging System - Wrapping & Shrinking Machines BVM SM4012 K-SC4030S Year 1993 - Serial-No. 931200665 Fully automatic packaging machine SM 4012K Max. infeed width: 420 mm Shrink tunnel: SC4030S Format (width x height): 450 mm x 330 mm 5 m chain gripper infeed Discharge conveyor GUK feeder for single sheets Isdpsh Ax Hfefx Al Njia Online video inspection via Skype video We look forward to your visit – more machines available in stock Available immediately – machine can be inspected Located in Emskirchen / Nuremberg – test runs possible

Stanje: novo, Pressure: 8.5 kN Stroke: 40 mm Throat depth: 95 mm Working height from/to: 95 - 240 mm Table surface: 160 x 110 mm Spindle diameter: 25 mm Machine weight: approx. 27 kg Dimensions (L x W x H): 160 x 230 mm Direct-acting pneumatic presses deliver the full pressing force throughout the entire stroke length. They are used primarily when long-stroke parts need to be processed with consistent force. Outstanding Engineering: • Long and precise spindle guidance for maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life Iedpfx Aljfv Awaj Nsia • Double-acting cylinder with end position cushioning on both sides • Double guide rings on the piston for constant, smooth operation • Oil-resistant sealing elements Special features of the PND series: • Spindle secured against rotation • Spindle return on PND 85/S via only one cylinder chamber – saves additional air • Working height fine adjustment is easy, fast and precise in 2 steps: – Basic adjustment by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limitation ring on the piston rod Additional advantage: Faster cycle times and air savings

Stanje: dober (rabljeno), TECHNICAL DATA AXES Rapid traverse X, Y: 15,000 mm/min Rapid traverse A, B: 15,000 mm/min Rapid traverse Z1, Z2, E: 18,000 mm/min Ijdpfxeu Uic Ts Al Neia Rapid traverse C: 90,000°/min Minimum input increment: 0.001 mm Minimum input increment, C-axis: 0.001° MACHINING CAPACITY Max. turning diameter: 20 mm Max. spindle stroke: 205 mm Max. drilling capacity: Stationary: 14 mm; Driven: 8 mm Max. tapping capacity: Stationary: M10 x P1.5; Driven: M6 x P1.0 MAIN SPINDLE Spindle speed: 500 – 10,000 rpm Drive: Spindle drive Main spindle motor: 3.7 / 5.5 kW Main spindle bore: 26 mm SUB SPINDLE Max. clamping diameter: 20 mm Max. part length for forward ejection: 150 mm Max. unclamping length: 75 mm Spindle speed: 500 – 10,000 rpm Sub spindle motor: 2.2 / 3.7 kW Indexing angle: 1°, 15° CONFIGURATION Operating mode: Right-handed Dimensions: 2,700 x 1,400 x 2,400 mm Weight: 3,400 kg SCOPE OF DELIVERY Includes (not exhaustive): Control: Fanuc Fire extinguishing system: Siemens Oil mist separator: Donaldson Transformer Hydraulic unit Parts conveyor Chip conveyor Bar feeder: LNS Tool holder Exact scope of delivery as per photos We do not guarantee the correctness, completeness or currentness of the information provided.

Stanje: pripravljen za uporabo (rabljen), moč motorja 11kW delovni tlak 10 bar zmogljivost 1,59m3/min rezervoar Isdpfx Alonr Hhij Nsia

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Cell with TIG-OTC-NH52-NEFC welding robot Isdpfxjm Uyhhs Al Njia Country of origin of the cell: Italy Year of manufacture: 2017 Country of origin of the robot: Japan Brand: OTC NH5 Year of manufacture: 2016 Number of axes: 6 Reach: 866 mm Payload: 5 kg Controller: OTC FD 11 Power source: OTC DA 300-P Cell dimensions: Length: 3500 mm Width: 1900 mm Height: 2400 mm

Stanje: novo, Pressure: 34.0 kN Stroke: 40 mm Throat depth: 130 mm Working height (min. – max.): 80 – 240 mm Table size: 190 x 140 mm Spindle diameter: 30 mm Machine weight: approx. 80 kg Dimensions (L x W x H): 375 x 200 mm Iiedpfx Alofv Avye Nea Toggle lever pneumatic presses Including fine adjustment of the working height via bevel gear with side-mounted handwheel, comfortable and easy to set. Toggle lever pneumatic presses are used when maximum pressing force is required just before the end of the stroke, e.g. for assembly, punching, embossing, riveting, etc.

Stanje: rabljeno, Leto izdelave: 1998, obratovalne ure: 8.700 h, Funkcionalnost: popolnoma funkcionalen, Der gebrauchte 2-Achs CNC-Drehmaschine DAEWOO Lynx 200B ist eine robuste und schnelle CNC-Drehmaschine mit schrägem Bett und Flachführungen in kompakter Bauweise. Sie ist mit einer CNC-Steuerung FANUC 21-T mit LCD-Monitor, Baujahr 1998, gemäß CE-Norm ausgestattet. Iiedex Nqliepfx Al Nja Hauptmerkmale: - Max. Umlaufdurchmesser über Bett: 460 mm - Max. Drehdurchmesser: 280 mm - Max. Drehlänge: 500 mm - Max. Stangendurchlass: 51 mm - Spindelaufnahme: ASA 6” - Spindel: max. Drehzahl 4.500 U/min - Spindelmotorleistung: 11 kW - Revolver: 10 Werkzeugplätze - Werkzeugabmessungen Dreh-/Bohrhalter: 25×25 / Ø40 mm - Reitstock: Pinolendurchmesser 65 mm, Pinolenhub 80 mm, MK4 - Maschinengewicht: 3.500 kg Zur Ausstattung gehören ein programmierbarer Reitstock mit automatischem Pinolenhub, Werkzeugvoreinstellung, ein hydraulisches 3-Backenfutter (wird anstelle des manuellen Futters geliefert) sowie Betriebs- und Wartungsanleitungen.