Tračna žaga - vodoravna

BERG & SCHMID GBS 250 Super AutoCut

Stanje: novo, Leto izdelave: 2023, Razpon rezanja okroglega jekla pri 45°: 108 mm, Obseg rezanja okroglega jekla pri 90°: 108 mm, največja višina reza: 150 mm, BERG+SCHMID Double Mitre Bandsaw GBS 250 Super AutoCut Cutting speed: 18–110 rpm • Mitre cuts: 60° left / 45° right • Quick-release vice, adjustable • Heavy-duty vice and cast iron machine base • Ball-bearing turntable • Hydraulic brake cylinder Hfjdpfxsr Ik Sqs Af Tob • Large, heavy-duty material support • Automatic coolant system • Worm gear drive running in an oil bath • Fully enclosed saw frame • Adjustable ball bearings • Tool compartment – base with door • Cut monitoring via ammeter • Variable cutting pressure feed regulator • Support roller (infeed side) • Machine base (supplied dismantled) GBS 250 Super AutoCut 3-Step System: I. Automatic lowering of the saw frame via hydraulic cylinder, stepless feed adjustment, with end switch at end of cut II. Rapid lowering mode for the saw frame up to the workpiece, then automatic switch to normal cutting feed (e.g., for marking) III. Hydraulic cylinder functions as brake cylinder: a) Manual mode (e.g., for notching) or b) Lowering while stationary Saw blade dimensions: 2765x27x0.9 mm Additional accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication systems, etc., available on request! Delivery time: ex stock Waiblingen Beinstein

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator Hfodsfgyicspfx Af Teb • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: novo, Cutting diameter: 255 mm Saw band length: 2765 x 27 x 0.9 mm Table height: 950 mm Cutting speed: 18–110 m/min Cutting diameter: 255 mm Cutting capacity at 90° (square): 240 mm Cutting capacity at 90° (flat): 300 x 180 mm Cutting capacity at 45° (round): 210 mm Cutting capacity at 45° (square): 190 mm Cutting capacity at 45° (flat): 200 x 160 mm Hfedpet I D Tujfx Af Teb Cutting capacity at 60° (round): 135 mm Cutting capacity at 60° (square): 110 mm Cutting capacity at 60° (flat): 130 x 100 mm Cutting capacity at 45° right (round): 180 mm Cutting capacity at 45° right (square): 160 mm Cutting capacity at 45° right (flat): 180 x 100 mm Total power requirement: 1.5/1.8 kW Machine weight approx.: 350 kg Space requirement approx.: 1700 x 900 x 2000 mm Manufacturer no.: 20437 Description: - Mitre cuts left 60° and right 45° - Quick-action vice, adjustable in T-slot for fast repositioning - Hydraulic brake cylinder - Large, ball-bearing turntable for easy mitre adjustment (durable) - Chip removal brush - Machine base with automatic cooling system - Lockable main switch, separate emergency stop - EMC (Electromagnetic Compatibility), UVV (Accident Prevention Regulation) - Current consumption display (indicates saw band wear, tool monitoring) - Automatic increased power output with the proven Berg & Schmid 3-stage AutoCut system

Stanje: novo, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangle 300 x 180 mm Saw blade length 2,765 x 27 x 0.9 mm Table height 950 mm Band speed 35 + 70 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m Double mitre metal band saw, GBS 250 Super AutoCut (20413) - Mitre cuts up to 60° to the left and 45° to the right - Ball-bearing rotary table - Quick-release vice - Heavy-duty, large material support - Automatic coolant system Hodpfx Ajurc S Rsf Tofb

Stanje: novo, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Hfjdsfd Abajpfx Af Tsb Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.61 t Required space: approx. 1.5 x 1.75 x 1.9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table - Vise laterally adjustable - Solid, large material support - Automatic cooling Illustration shows semi-automatic version.

Stanje: novo, Leto izdelave: 2025, Showroom model available immediately: New Kaeser SK 25 T - 10 bar screw compressor with integrated refrigeration dryer Pressure: 10 bar Rated power: 15 kW Hfodsdrc Txspfx Af Tjb Free air delivery: 2.11 m³/min Sound level: 67 dB(A) Compressed air outlet: 1" Dimensions (L x W x H): 750 x 1240 x 1260 mm Weight: 395 kg Operating hours: 0 h Convenient leasing options for new machines available through our in-house bank. Visit our store. We always have a large selection of new and used compressors in stock!

Stanje: kot nova (razstavni stroj), Column drilling machine Make: ALZMETALL Model: AX 3s iTRONIC Condition: New machine Speed range: 100 - 1,800 rpm Standard features include: - 7" TFT LCD display with touch function: Manual input of target spindle speed, Actual speed display, Integrated drilling depth indicator with Hfodpfx Asiypz Esf Tsb touch zero-point setting, Virtual drilling depth scale in the display, Machine status indicators and warning messages in the display, service information, Selectable operating language: DE/EN/FR/ES/IT/NL/RU. - Tapping device - Infinitely variable speed adjustment via lever - Digital speed display - Three separate buttons for clockwise rotation, counterclockwise rotation, and stop - Clockwise/counterclockwise rotation via contactor control - Spindle guard - Operating manual Other key technical specifications: - 30 mm drilling capacity in ST 60 - 140 mm quill stroke - Spindle taper: MT 3 - Column diameter: 115 mm - Motor power: 1.0 / 1.6 kW - Table size: 515 x 360 mm With the following options: - LED machine lamp - Automatic spindle stop - Technology calculator in the display - Workpiece counter

Stanje: novo, Thread Diameter: M6 - M24 mm Speed: 200 rpm Radius: 1200 mm Adjustable Angle: 0 - 90 degrees Machine Weight: approx. 0.4 t Required Space: approx. 1.4 x 0.1 x 0.7 m Electric Tapping Machine / 4450124SET Hfodeg N Nl Depfx Af Tsb Fast and precise threading with a freely positionable swing arm - Machine head swivels from 0 to 90 degrees - Quick-change chuck with slip clutch for safe threading with no risk of breakage - Forward/reverse operation selectable on the machine head - Thread size, speed, pitch, and thread depth adjustable via touchscreen on the swing arm - Manual mode: once the preset thread depth is reached, the spindle stops automatically; forward and reverse must be manually activated - Automatic mode: after reaching the preset thread depth, the machine automatically switches from forward to reverse – ideal for tapping multiple blind holes Includes one each of thread tapping chucks GT24: M6, M8, M10, M12, M14, M16, M18, M20, M22-24 Base frame: 900 x 600 x 875 mm

Stanje: novo, OPTIMUM OPTIsaw S275N Metal Bandsaw - Display Model - Infinitely adjustable feed, swiveling ----- Technical Specifications ----- Swivel Range: 0 - 60°, Cutting Height: 150 mm, Cutting Depth: 230 mm, Blade Speed: 45 / 90 m/min, Blade Length: 2,480 mm, Motor (400 V): 1.1 kW, Dimensions (LxWxH): 1,400 x 530 x 1,360 mm, Hedsu R S Hpepfx Af Tjfb Weight: 185 kg - new display machine -

Stanje: novo, najv. debelina jeklene pločevine: 4 mm, - Capacity 4 mm - Hydraulic roll adjustment - Foot switch - Brake motor Hfodpjgg Nq Hjfx Af Tob - With 4 sets of rolls - Emergency stop - 400V