Aluminijasta krožna žaga

GRAULE ZS 135 N

Stanje: novo, NEW Description: - Crosscut and mitre circular saw with a maximum cutting height of 135 mm - Saw can be adjusted for mitre cuts in 2 planes - Sturdy cast iron construction - Precision ball bushing guide for the tool carriage on hardened and ground steel shafts - Manual saw feed - Rapid mitre adjustment up to 25° horizontally and up to 45° vertically - Adjustable stop positions at 90° and 45° Njdpfx Agsvwf T Ss Tswc - Lower blade guard connectable to extraction system Scope of delivery: Crosscut and mitre circular saw type ZS 135 N without saw blade Technical data: - Motor: 400 V / 2.2 kW - Speed: 3800 rpm - Cutting length: 430 mm - Cutting width: 430 mm at 90° / 300 mm at 45° - Cutting height: 135 mm at 90° / 92 mm at 45° - Mitre range horizontal: 45°-90°-25° - Mitre range vertical: 90°-45° (tilted to the left) - Saw blade diameter: 350 mm - Extraction port diameter: 100 mm - Weight: 100 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006,

Stanje: rabljeno, Leto izdelave: 1999, Višina reza pri 90°: 135 mm Dolžina reza: mm Žagin list vrtljiv in nagiben: da Vertikalno zamik območja: -60° do +60° Valjčna proga / podložna miza: ne Premer žaginega lista: Število vrtljajev: 2800 vrt./min Moč motorja: 2 kW Motorna zavora: da Priključek za odsesovanje: 100 mm Dolžina stroja: Širina stroja: Teža: 110 kg Nwodpfsxc Hklex Ag Tjc

Stanje: rabljeno, številka stroja/vozila: 007350, Working area X-axis: 4000 mm Working area Y-axis: 1400 mm Working table: With vacuum console supports Main spindle power: 15 kW Nodpfswcyd Iox Ag Tswc Number of controlled axes: 4 axes Number of drilling spindles: 30 Number of tool positions: 28

Stanje: novo, Saw blade diameter: 420 x Ø 40 mm Njdpfoxabztjx Ag Tjwc Cutting diameter: 170 mm Cutting length: 410 mm Saw blade dimensions: 420x3.2/2.4x40 mm Speed: 3500 rpm Extraction port diameter: 100 mm Total power requirement: 3.0 kW Machine weight: approx. 120 kg Space requirement: approx. 1300 x 800 x 1600 mm - Crosscut and miter circular saws for cutoff cuts * Drive motor 3.0 kW - 400 Volt - Dual-sided miter adjustment (60° / 45°) with fixed stops - Compound cut 45° on both sides with fixed stops - Robust grey cast iron construction - Precision linear ball bearing guide for tool carriage on hardened and ground steel shafts - Manual saw feed - Infinitely variable saw blade height adjustment - Connection stub for optional dust extraction Cutting data: - Cutting length at 90° = 410 mm - Cutting height at 90° = 170 mm - Cutting length at 45° = 290 mm - Cutting height at 45° = 115 mm Special accessories included: - Compound cut setting via hand crank, adjustable on both sides (45°/45°) - Carbide-tipped circular saw blade 420x3.2/2.6x40 mm * Z = 108 FTZ negative for aluminum and plastic - Infinitely adjustable hydraulic feed brake - Pneumatic material clamping from above, consisting of: * 2 adjustable vertical clamping cylinders with hand lever valve - 1x machine stand - More powerful drive motor (3.0 kW)

Stanje: rabljeno, Leto izdelave: 2017, Number of spindles: 5 pcs. Working width: 240 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Weight: approx. 3500 kg Control: SCM Control 10 SCM Superset NT with workpiece return ----- Machine fully checked. Brief summary: ----- - 5 spindles - Powerful motors - Left and top spindle electronically controlled for width and height - With workpiece return to the operator 1st spindle ----- First lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick clamping system 3rd spindle ----- First left vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick clamping system Electronic horizontal positioning / motorised width adjustment 4th spindle Njdpfx Ajwwl Nleg Tjwc ----- First top horizontal spindle Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick clamping system Electronic radial positioning / motorised height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm SCM Control 10 user interface Including workpiece return Including used planer heads as available. (Technical specifications according to manufacturer – no guarantee!)

Stanje: rabljeno, Length 2700 mm Width 1100 mm Height 850 ± 150 mm Motor power 0.37 kW Electrical power 0.5 kW Compressed air 6 bar Horizontal impregnation unit 'Pro flow' for individual parts with rinsing circuit. ----- Functional features: Machine for horizontal flooding of individual workpieces. The product is applied by a row of nozzles. Excess product is then blown off by air nozzles. The pump and air nozzles are automatically controlled and only operate when a workpiece passes through. This helps to reduce compressed air consumption. The recirculation mode ensures minimal product consumption. ----- Construction features: Structure Robust steel frame, coated with high-strength, water-soluble paint. Machine body made of hot-sealed, thick polypropylene panels. Four independent chambers for entry, flooding, air-blow, and exit. Horizontal feed of workpieces By means of motor-driven plastic rollers with grooves. Electronic frequency inverter for controlling and varying feed speed. Transmission The machine is fitted with an exclusive system whereby all gear mechanisms are located outside the flooding chamber and are easily accessible for the operator, guaranteeing longer operational life and facilitating maintenance. Moving parts are protected by cover plates and appropriate seals. Recirculation pump Pneumatic double-diaphragm pump with valves, seals, and diaphragms made from nitrile rubber, and a housing made of plastic material (PVDF). Air nozzles A blow-off system is installed in the first chamber to prevent product from escaping. A second blow-off system after the flooding chamber removes excess product from the workpiece. Electrical control panel According to CE, protection class IP 55. Includes inverter for adjusting feed speed. Technical data Length mm 2700 Nsdpfenl Nqqsx Ag Tjwc Width mm 1100 Feed speed (min./max.) m/min 3-6 Drive group motor power kW 0.37 Installed electrical power kW 0.5 Distance between entry and exit rollers mm 2520 Working height (adjustable) mm 850 ± 150 Min. length of workpieces to be flooded mm 250 Max. width of workpieces to be flooded mm 300 Max. height of workpieces to be flooded mm 250 Compressed air consumption l/min 2000 Required compressed air pressure bar 6 Equipment and included accessories Rinsing circuit for Pro Flow ----- Price of the above machine: on request! plus packaging and transport ----- (Technical data according to manufacturer – without guarantee! Illustrations may differ from original. Prices net, plus VAT (domestic))

Stanje: novo, Glazing Bead Stapling Machine "2 P Jumbo Automatic E.C." - New - Your Benefits: - Corner joints are closed - No open glazing bead joints - No color differences when painting - Glazing bead frames are easy to assign Staple Corner Jointing Machine 2P Jumbo Automatic E.C. for stapling glazing bead frames. Selectable between automatic and manual operation; With angle stop, clamping device from above and front Pressure is individually adjustable. Insertion of parallel and overlapping staples possible via electronic control programming. Stapler can be mounted on a suitable work table, operation via foot pedal. ----- Price for this configuration on request! Plus statutory VAT as well as packaging/shipping ----- Images show the Staple Corner Jointing Machine 2P with the optional mobile worktable (see details under additional charges) Nedpfxsvnh T Ns Ag Tjwc Additional charges: ----- Mobile worktable Height adjustable from 700 - 1000 mm, 2 detachable support rails, 1000 mm long, 2 pivoting and sliding support rails 1000 mm, support rails covered with felt, 4 swivel castors, 2 of which with brakes. ----- Surcharge: 1,321.00 Euro net Staples: packages 15 mm staples (package of 2,000 pcs): Price 22.00 Euro 12 mm staples (package of 3,000 pcs): Price 32.00 Euro 10 mm staples (package of 3,000 pcs): Price 32.00 Euro Dimensions and Weights ----- Jumbo Automatic E.C. 470 x 370 x 300 mm, 35 kg Work table 32 kg All prices net. Plus statutory VAT. Ex works plus packaging and shipping (Technical data according to manufacturer – no guarantee!)

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Center za razrez in obdelavo PVC okenskih okvirjev ter prečk. Stroj je sestavljen iz dovajalnega magazina, žaginega modula, G-modula za obdelavo PVC-ja, prečne mize za ročni vnos jeklenih profilov, vijačnega modula z avtomatskim vijačem z dna, vrtalnega modula za mozničenje, vzdolžne žage za prečke in izhodne mize z ročnim vijačem za zaporne plošče. Njdpfx Ajxbdnrjg Tjwc Na voljo konec septembra 2025.

Leto izdelave: 2012, Stanje: zelo dobro (rabljeno), Window production line WEINIG consisting of: Machining center Unirex 3000 Univar 15 Nwodpfx Ajh H Iyxjg Tjc Unitex 15