Tračne žage - vodoravno

BERG & SCHMID GBS 305 AutoCut

Stanje: novo, Cutting diameter: 280 mm Saw band length: 3370 mm Cutting width: 350 mm Saw blade dimensions: 3370 x 27 x 0.9 mm Cutting capacity at 90° round: 280 mm Cutting capacity at 90° square: 250 mm Cutting capacity at 90° rectangular: 350 x 200 mm Cutting capacity at 45° round: 240 mm Cutting capacity at 45° square: 220 mm Cutting capacity at 45° rectangular: 230 x 220 mm Cutting capacity at 60° round: 170 mm Cutting capacity at 60° square: 150 mm Knsdpfxjivuqtj Ahvjd Cutting capacity at 60° flat: 170 x 100 mm Saw band speed: 37 + 74 m/min Total power requirement: 1.8 kW Machine weight approx.: 0.6 t Space requirement approx.: 1.5 x 1.7 x 2.0 m

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 3.000 h,

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350 x 200 mm Saw band dimensions: 3375 x 27 x 0.9 mm Band speed: 18 – 110 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.61 t Space requirement: approx. 1.5 x 1.75 x 1.9 m Knjdjnq Sanspfx Ahvsd Double-mitre metal bandsaw with AutoCut function - Mitre cuts up to 60° left and 45° right - Ball-bearing rotary table - Side-adjustable clamping vice - Heavy-duty, large material support - Automatic coolant system Image shows semi-automatic version.

Leto izdelave: 2009, Stanje: pripravljen za uporabo (rabljen), Turning diameter: 200 mm, through hole diameter: 330 mm, through hole diameter over cross slide: 260 mm, travel X/Z: 160 mm/460 mm, feed rate X/Z: 24 m/min, spindle speed: 5000 rpm, spindle bore: 51 mm, spindle power: 16.5 kW / 11 kW, torque: 1665.5 Nm / 112 Nm, tailstock: 400 mm, tool stations: 12. Machine dimensions X/Y/Z: approx. 4200 mm / 1700 mm / 2300 mm, weight: approx. 3500 kg, control: Siemens Sinumerik 810D. Includes chip conveyor. Documentation available. On-site inspection possible. Kedev Dkb Ispfx Ahvjnd

Leto izdelave: 2024, Stanje: novo, Working chamber 1100 x 660 x 816 mm (W x D x H) Blasting chamber Dust-proof negative pressure cabin in a robust sheet steel construction Work gloves Special rubber, wear-resistant, cotton lining on the inside, securely attached to the cabin to prevent dust leakage Doors Blasting chamber W x D x H = 1100 x 660 x 816 mm Two side doors, dust-tight seal, double-walled, noise-insulated foam filling, lockable, with electrical safety interlock Abrasive recovery Via coordinated MHG recovery system Ksdpfoh Hxubjx Ahvond Operation ON/OFF switch for extraction and lighting, pressure regulator, manometer, and foot switch Viewing windows

Stanje: novo, Leto izdelave: 2024, SEMI-AUTOMATIC DRILLING SYSTEM “UNIBOHRFIX 50” With the UniBohrFix 50 drilling system, all types of profiles can be processed either against a stop or using the gripper. Drilling is carried out manually via a lever, while materials are automatically positioned to the next drilling point along the X-axis. You can easily process entire programs or use the stop plate for fast single-hole drilling. The system is suitable for workpieces up to 100 kg. The system also includes a minimum-quantity spray unit with holder and spray can. Technical data for the standard version can be found in the table. On request, all components of the system can be customized to your requirements. You can choose from different drilling machines, roller conveyors, positioning systems, and clamping vices. Plantec configures the system to perfectly meet your needs! BENEFITS - A series of holes is drilled automatically at precise intervals. - Operator errors are drastically reduced. - Programming is completed within minutes. - Excellent price-performance ratio. - Considerable reduction in manpower requirements. Standard measurement lengths: 3,000 mm 6,000 mm Drilling machine: Unimax 2 T Spindle: MK2 Continuous drilling capacity: 18 mm Speed ranges: Knjdpfx Asgwt Sljhved 100-2000 rpm, 200-4000 rpm Throat depth: 225 mm Spindle-table distance: 60-400 mm Adjustable clamping vice with digital linear readout Positioning length stop: PD-100e Control system for automatic positioning Positioning: Absolute or incremental (chain dimension) Easy-to-read LED display Carriage with DC servomotor Positioning accuracy: +/- 0.1 mm/m Stop arm with spring damping Stop plate with groove Memory control with 3,000 storage places Roller conveyors: RD-200/3 Load capacity: 200 kg/m Roller width: 290 mm Roller diameter: 40 / 50 mm Insert plates Bracing for stability Control cabinet Available options: - Minimum-quantity spray system with spray head and holder - Gripper for clamping material to the stop plate

Stanje: rabljeno, Leto izdelave: 1996, Spindle diameter: 60 mm X-axis travel: max. 1000 mm – min. 100 mm Y-axis travel: max. 1000 mm – min. 100 mm Drilling capacity in steel: max. 40 mm Tapping capacity: max. M24 Material thickness: max. 60 mm – min. 5 mm Spindle speeds – infinitely variable: 1 – 1,000 rpm Feed rate, infinitely adjustable, rapid traverse: 1 – mm/min Feed rate, infinitely adjustable, working feed: mm/min Knodpfx Asgvkkzshvsd Feed force: 16 kN Tool holder: SK 40 Spindle stroke: 600 mm Positioning speed in all axes: 1 – 10,000 mm/min Positioning accuracy over 300 mm: +/- 0.01 mm Table load capacity: max. 500 kg Working height: 1,000 mm Machine weight: approx. 4.8 t Space requirement: approx. 3.5 x 3.3 x 3.1 m Control system: Bosch CNC plate drilling machine HMB PBM1000/60 - W12 for drilling end plates and base plates in steel construction, equipped with automatic tool changer (12 positions) Number of drilling spindles: 1 Operating voltage: 220/380 V Frequency: 50 Hz Total connected load: 22 kVA

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 26.678 h, Funkcionalnost: popolnoma funkcionalen, Táto stroj je exkluzívne k dispozícii prostredníctvom spoločnosti Montrasio GmbH a predáva sa v záujme oprávnených osôb. DMG DMU 100P duoBLOCK – 5-osé CNC obrábacie centrum (2016) Rok výroby: 2016 Ovládanie: SIEMENS CELOS Posuvy / kapacity X-os: 1 000 mm Y-os: 1 250 mm Z-os: 1 000 mm Priemer obrobku: 1 100 mm Výška obrobku: 1 600 mm Hmotnosť obrobku: do 2 200 kg Stôl / osi Veľkosť stola: 1 100 × 900 mm Rýchlosť otáčania stola: 35 min⁻¹ Knedpfx Aexl Arkjhvjd Max. zaťaženie stola: 2 223 kg B-os univerzálnej frézovacej hlavy: rozsah natočenia −30° až +180° Vreteno / nástroj Otáčky vretena: 0 – 12 000 min⁻¹ Výkon hlavného motora: cca 69 HP (≈ 51,5 kW) Nástrojové upínanie: HSK-A100 Zásobník nástrojov: 63 miest Inštalačné rozmery Plocha: cca 24 m² Výška stroja: cca 3 606 mm Hmotnosť stroja: cca 24 540 kg Príslušenstvo / výbava CNC riadená univerzálna frézovacia hlava (B-os) Snímač na meranie obrobku Systém merania nástrojov 3D Quickset Dopravník na triesky

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, poteza s peresom: 190 mm, hitrost vretena (min.): 41 obr/min, največja hitrost vretena: 1.800 obr/min, skupna masa: 1.920 kg, teža obdelovanca (maks.): 17 kg, najv. debelina jeklene pločevine: 32 mm, vrtilni moment: 250 Nm, višina mize: 900 mm, Used DONAU Rapid Radial Drilling Machine Type DR 32 - Fully overhauled by vaumatec in 2022 - Equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 support feet to relieve the table frame) Technical data: Drilling capacity (solid material): St 60/E335, Ø 32 mm (with feed rate 0.20 mm/rev): GG 22, Ø 45 mm Tapping capacity: St 60/E355, M26 Tapping capacity: GG22, M35 Tool holder: MT4 Column diameter: Ø 195 mm Spindle nose to table distance (min./max.): 260/660 mm Table height: 900 mm Quill stroke: 190 mm Column travel: 400 mm Spindle speeds, Range I: 41-1800 rpm Feeds: 0.1-0.15-0.20-0.3 mm/rev Spindle torque: max. 250 Nm Arm travel resistance (radial): 25 N Arm travel resistance (axial): 25 N Clamping force (radial): 3500 Nm Clamping force (axial): 5500 N Feed force: 7500 N Max. permissible mass: 17 kg Max. permissible moment of inertia: 0.002176 kgm Knjdpern Riqefx Ahvsd Workpiece: Max. table load: 1000 kg Center of gravity: centered on the working surface

Stanje: novo, Cutting diameter: 300 mm Saw blade length: 3320 x 27 x 0.9 mm Table height: mm Blade speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Space requirement: approx. m Kjdsfg E H Tepfx Ahvond Functionality in CCS version: After positioning the material and closing the vices, the cutting process is initiated. The lowering of the saw arm is accomplished by its own weight, counterbalanced by a spring and regulated via a hydraulic brake cylinder. Once the cut is completed, the saw arm is manually raised to the required position for material feed. Electrical control panel (marked cable connections, indicator light for operational readiness, main safety switch prepared for padlock, switch or speed selector, emergency stop, thermal magnetic protection, 24-volt low voltage system). Electronic band tension converter with screen display. Manual vice with quick-clamping system. Base with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional). Electric coolant pump for cooling and lubrication of the saw band. Chip removal brush. Adjustable precision stops for repeated cuts of the same length. Machine designed for pallet truck transport. Bi-metal saw band for solid and profile material. Tool kit and operating instructions.