Tračna žaga

BERG & SCHMID GBS 305 AutoCut

Stanje: rabljeno, Leto izdelave: 2014, Premer reza: 305 mm Dolžina žage: 3370 mm Širina reza: 350 mm Dimenzije žage: 3370 x 27 x 0,9 mm Zmogljivost reza pri 90° (okrogel material): 305 mm Zmogljivost reza pri 90° (kvadratni material): 260 mm Zmogljivost reza pri 90° (pravokotni material): 350 x 200 mm Zmogljivost reza pri 45° (okrogel material): 250 mm Zmogljivost reza pri 45° (kvadratni material): 230 mm Hfsdpfjzu A R Esx Ah Nol Zmogljivost reza pri 45° (pravokotni material): 230 x 200 mm Zmogljivost reza pri 60° (okrogel material): 175 mm Zmogljivost reza pri 60° (kvadratni material): 155 mm Zmogljivost reza pri 60° (ploščati material): 170 x 100 mm Skupna potrebna moč: 1,5 / 1,8 kW Teža stroja: približno 600 kg Potreben prostor: približno 1700 x 1500 x 1950 mm Oprema: - Polavtomatični način delovanja z avtomatskim spuščanjem okvirja žage - Kotni rez (levo): 60° + (desno): 45° - 2 hitrosti: 40+80 m/min - Masivna miza za podpiranje materiala - Navodila za uporabo

Stanje: rabljeno, Metal band saw Hans Schreiner MBS270, good condition, 1.5 kW, 2450 mm band length, 227 kg Hjdpewzzgnefx Ah Njfl Prices subject to change without notice. Errors, misprints, and typographical mistakes excepted.

Stanje: novo, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Hfodpjfd Abaofx Ah Nol Cutting capacity at 90 degrees: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.61 t Required space: approx. 1.5 x 1.75 x 1.9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table - Vise laterally adjustable - Solid, large material support - Automatic cooling Illustration shows semi-automatic version.

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350 x 200 mm Saw band dimensions: 3375 x 27 x 0.9 mm Band speed: 18 – 110 m/min Hfsdpfx Ajnq Saneh Nel Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.61 t Space requirement: approx. 1.5 x 1.75 x 1.9 m Double-mitre metal bandsaw with AutoCut function - Mitre cuts up to 60° left and 45° right - Ball-bearing rotary table - Side-adjustable clamping vice - Heavy-duty, large material support - Automatic coolant system Image shows semi-automatic version.

Stanje: novo, Cutting diameter: 305 mm Saw band length: 3375 mm Cutting width: 350 mm Saw band dimensions: 3375 x 27 x 0.9 mm Cutting capacity at 90° round: 305 mm Cutting capacity at 90° square: 260 mm Cutting capacity at 90° rectangular: 350 x 200 mm Cutting capacity at 45° round: 250 mm Cutting capacity at 45° square: 230 mm Cutting capacity at 45° rectangular: 230 x 200 mm Cutting capacity at 60° round: 175 mm Cutting capacity at 60° square: 155 mm Hfsdpfx Ahou Dbvte Nol Cutting capacity at 60° flat: 170 x 100 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 0.7 t Space requirement: approx. 1.5 x 1.8 x 1.9 m - Mitre cuts up to 60° to the left and 45° to the right - Material height sensor - Ball bearing rotary table - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Hfsdpfsmhhypex Ah Njl Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: rabljeno, Leto izdelave: 1994, Tehnični podatki: Premer žaginega lista: 450 mm Število vrtljajev: 2820 min⁻¹ Največja dolžina reza: 5000 mm Najmanjša dolžina reza: 240 mm Potreben zračni tlak: 6-8 bar Premer izvrtine žaginega lista: 32 mm Kot reza v obe smeri: 45+90° Hfjdpju Nigksfx Ah Nol Priključek za stisnjen zrak: 6–8 bar Skupna priključna moč: pribl. 4,6 kW Teža stroja pribl.: 1,1 t Dimenzije stroja (D x Š x V): pribl. 6,05 x 1,49 x 1,79 m Dodatne značilnosti stroja: - Vpenjalna naprava: pnevmatska, vertikalna in horizontalna - Pnevmatska naprava za meglenje - Višinsko nastavljive noge stroja - Materialne podpore pomične skupaj z žago - Dvoročno upravljanje - Števec kosov Premer reza v skladu s tabelo reznim diagramom, saj je odvisen od hitrosti in žaginega lista. Hitrost rezanja pri 2820 obr./min in premeru lista Ø = 66 m/sec. Oprema: - 2 rezervna žagina lista

Stanje: novo, Leto izdelave: 2023, BERG+SCHMID krožna žaga iz aluminija, model VELOX 350, ročna, regulirana hitrost: 1800+3.600 vrt/min • Naklon desno in levo 45° • Naklon glave do 45° (nastavljiv) • Vrteča miza s krogličnimi ležaji Hsdpfx Ahjr Ilkts Njfl • Osnova stroja • Najvišja kakovost reza zaradi dušenja vibracij • Zelo miren potek reza • Enostaven zagon in visoka zmogljivost • Podstavek stroja s predalom za žagovino Dimenzije žaginega lista: 350x32 mm Dodatna oprema, kot so žagini listi, valjčni transporterji, merilni vodila, minimalno mazanje itd., je na voljo na zahtevo! Dobavni rok: iz skladišča Waiblingen Beinstein.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2003, vrsta upravljanja: ročni, stopnja avtomatizacije: ročni, vrsta aktuacije: hidravlični, proizvajalec krmilnikov: Tauring, model krmilnika: digital readout, število valjev: 3, premer gredi: 70 mm, premer valja: 245 mm, Premer cevi (maks.): 100 mm, Debelina stene cevi (maks.): 6 mm, skupna masa: 1.300 kg, skupna dolžina: 1.640 mm, skupna širina: 1.220 mm, skupna višina: 1.580 mm, moč: 5,5 kW (7,48 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, Oprema: CE označba, dokumentacija / priročnik, kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, Profilna upogibna valjčna stroj Tauring Alfa 70H2, letnik 2003 - Hidravlični stroj za upogibanje profilov z digitalnim prikazovalnikom - 3 pogonsko gnani valji - Dvojni predpritisni, piramidna konfiguracija valjev Izpust osi: 70 mm Velikost univerzalnih valjev: 245 mm Bočna korektorja levo/desno, hidravlično gnana Stroj je reverzibilen in lahko deluje z osmi vertikalno ali horizontalno Orodje: - Komplet univerzalnih valjev in distančnikov Hedjyx Dg Sepfx Ah Nofl - Komplet valjev za upogibanje cevi za cevi 22,5 – 61 – 76 mm (glejte slike valjev v prilogi) Skupna vgrajena moč: 5,5 kW, 380 V/50 Hz Dimenzije: 1640 x 1220 x V1580 mm Teža: 1300 kg -TABELA ZMOGLJIVOSTI V PRILOGI

Leto izdelave: 1998, stanje: dober (rabljeno), številka stroja/vozila: 0159488169537, Offer 23293 Technical Data: - Pressing force: 300 kN - Punching capacity, e.g.: up to 30 mm Ø in steel 9 mm - or with special punching tool: up to 100 mm Ø in steel 2.5 mm - Stroke adjustable: 0 to 28 mm (stepless) - Strokes per minute: 26 to 36 1/min Hfodepuy H Depfx Ah Nsl - Throat depth: 610 mm - Installation height: 240 mm - Drive: 400 V / 4 kW - Space requirement approx.: W 750 x H 1650 x D 1350 mm - Weight approx.: 1300 kg - Incl.: - Foot switch - Centre-point finder - Support table with foldable stops W 1100 x D 850 mm - Stop travel from centre of punch - Width between left/right approx. 470 mm x D 510 mm