Stroj za upogibanje profilnih obročev

ZOPF ZB 30/3

Stanje: novo, Leto izdelave: 2025, Ring Bending Machine Zopf - incl. digital display - three powered rollers with smooth surface - manual adjustment of the upper roller - working position horizontal and vertical - Model ZB 30/3 MD - shafts supported with tapered roller bearings - use of interchangeable guide rails on the guide carriage - roller diameter 76–86 mm - shaft diameter 20 mm - shaft speed 11 rpm - drive motor 0.18 kW - bending capacity round tube 30 mm Kdsdpjdktnvefx Al Njk - flat bar 25x6 mm - angle iron 20x20x4 mm - weight 80 kg

Stanje: rabljeno, Used 3D printer EOSINT M 270, low operating hours (4,910) Kdedpfewd Ulvox Al Nsk

Stanje: novo, Leto izdelave: 2024, Ring Bending Machine Zopf - incl. digital display with programmable values - three driven rolls with smooth surface - hydraulic adjustment of the upper roll - working position horizontal and vertical - Model ZB 30/3 H (without base frame) - shafts supported by tapered roller bearings - use of interchangeable slide rails on the guide carriage - roll diameter 76-86 mm - shaft diameter 20 mm - shaft speed 11 rpm Kodpfx Aljgh T Iaj Nodk - drive motor 0.18 kW - hydraulic motor 0.55 kW - bending capacity for round tube 30 mm - flat steel 25x6 mm - angle steel 20x20x4 mm - weight 110 kg

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: 302340, Ring bending machine Manufacturer: KB, Turkey Model: MB 30 Lower shaft: 30 mm Koded S Uf Sspfx Al Nedk Upper shaft: 30 mm 2 driven rollers With base frame for horizontal and vertical operation Bending capacity: - Round tube up to 48 x 3.0 mm - Flat bar (upright) 50 x 10 mm - Square tube 40 x 40 x 3 mm Weight: 170 kg Motor: 0.75 kW, 400 Volt, 50 Hz, 3-phase.

Stanje: rabljeno, Leto izdelave: 1998, Cutting capacity at 90 degrees: round 250 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular Saw band length 2965 x 27 x 0.9 mm Table height mm Band speed 37 / 76 m/min Total power requirement 1.0 kW Machine weight approx. 0.38 t Space requirements approx. 1.0 x 1.6 x 1.4 m Double mitre band saw Kdedpfx Alsu Sbpvs Njk

Stanje: dober (rabljeno), Brand: Ercolina Model: CE40H3 Year of manufacture: 2006 Hydraulically driven Roll diameter: Ø 165 mm Shaft diameter: Ø 40 mm Tube capacity (thin wall): Ø 70 x 1.5 mm, min. Ø 700 mm Tube capacity (thick wall): Ø 2" x 3.2 mm, min. Ø 450 mm Kdjdjw Hx Tvspfx Al Nsk Angle profile capacity: 50 x 50 x 6 mm, min. Ø 400 mm Flat bar capacity: 50 x 10 mm, min. Ø 250 mm Flat bar capacity (hard edge): 100 x 15 mm, min. Ø 250 mm Box section capacity: 50 x 50 x 3 mm, min. Ø 500 mm Shaft capacity: Ø 35 mm, min. Ø 250 mm Motor power: 1.85 kW Bending speed: 10 rpm

Stanje: dober (rabljeno), Leto izdelave: 2001, Trennjaeger TEBA 240 DG Round capacity: 240 mm Kdodpfx Alou Ekw Ns Nsk Rectangular capacity: 230 x 230 mm Motor: 1.5 kW Dimensions: 1,950 x 1,650 x 1,000 mm Mitre saw angles: 90° / -45° / +45° / +60° Cutting speed: 40 / 80 m/min.

Stanje: novo, največja dovoljena obremenitev: 49.000 kg, skupna masa: 60.800 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable Loading Platform: - Loading platform, extendable design with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, checker-plate covering above the axles Two-Part Removable Ramps: - One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulic side-shift - Maximum load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two fixed axles and two steering axles (self-steering), air suspended, with drum brakes, raise/lower function - Self-steering axles with electro-magnetic reverse lock, can be activated by reverse gear or manually - Axle tool kit - Tyre size 235/75 R 17.5 Brake System: - Braking system according to EU regulations with EBS-E (4S3M) Steel Structure: - Steel structure made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - First-class, long-lasting corrosion protection of the standard shot-blasted welded frame ensured by a 2-component (2K) zinc dust primer - High-quality single-tone topcoat using 2-component (2K) paint in Nova grey Electrical System: - Electrical system according to EU regulations, 24 volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connector strip with 24N, 24S, and 15-pin sockets Included Accessories: - 2" kingpin - Galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the headboard - Yellow-red air couplings on the galvanized front connector strip - 4 wheel chocks with holders on the front wall - Mount at the rear section of the gooseneck for ALU approach ramps Kdsdpsh Etf Rsfx Al Nek - Galvanized folding supports underneath the loading platform chamfer - One holder for warning beacon - Cover plates to bridge the gap between ramps and loading platform - White reflective tape on the side, red on extension and rear, according to EU regulations - Electro-hydraulic power unit - At the gooseneck and ramps (left/right) a holder each for warning signs including socket - Control valves for the ramps mounted on the right side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the gooseneck, plug-in ALU side boards and rear wall approx. 2,440 x 400 mm - Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading platform for one 20ft, two 20ft or one 40ft container - 7 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform - Galvanized, extendable platform wideners approx. 230 mm per side - Lift axle on the front axle with control system - 20 x 20 mm square climbing bars - BEKAMAX central lubrication system - Four warning signs extendable by approx. 400 mm eac

Stanje: novo, Leto izdelave: 2025, 2-roll driven profile bending machine Hydraulically adjustable top roll Ksdpfx Ashgiuhol Nodk Shaft diameter: 40 mm Roll diameter: 152–162 mm Rotational speed: 8.5 rpm Top roll adjustment: 120 mm Capacity chart: see attachment Machine available in various configurations: Manual adjustment, 3-roll drive, etc.

Stanje: novo, Cutting capacity at 90 degrees, round: 240 mm Cutting capacity at 90 degrees, square: 240 mm Cutting capacity at 90 degrees, rectangular: 165 x 310 mm Saw band length: 2725 x 27 x 0.9 mm Table height: 890 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m Kdsdpfx Aohpktvol Nsk The Z252/DG is equipped with the following features: - Hydraulic cylinder - Emulsion pump - Eccentric clamp - Base frame - Saw band - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.