Amtec nakup rabljenega (597)

Stanje: novo, Leto izdelave: 2025, Fully automatic paper labeling machine, controlled via touchscreen, rotary dial, or PLC, with photoelectric sensors. Variable motor speed and conveyor chain belt. - Specifications: Label length: 250–600 mm; label width: 65–195 mm; bottle diameter: 80–190 mm; core diameter of label roll: 76 mm; max. outer diameter of label roll: 300 mm; labeling accuracy: ±1 mm; max. machine cycle rate (idle): 33 cycles/minute; power supply: 220V, 50Hz/60Hz; machine dimensions: L2000 mm × W900 mm × H1500 mm; weight: 350 kg. Iodpfx Asv Nk R Toh Deih Please note that our prices for new equipment are often below typical used machine prices. Feel free to contact us and let us know your packaging requirements. - We generally have 30–50 different new machines available from stock at all times. For custom-built machines, we offer very short delivery times starting from around 3 weeks. - All machines are available with a full warranty.

Leto izdelave: 2025, Stanje: novo, Powder filling and sealing system for cans, including vacuum and gas flushing module, laser engraver, and can turner. Specifications: - Can diameter: 99–127 mm - Can height: 100–180 mm - Output: up to 7 cans/minute at -90Kpa vacuum - Residual oxygen: ≤ 3% - Nitrogen pressure: 0.1–0.8 MPa - Compressed air supply: 0.6–0.8 MPa - Power supply: 3 kW, AC 220V - Machine dimensions: L1900 x W800 x H1800 mm - Weight: 880 kg Iiedpfov Nk S Rsx Ah Dsh Laser engraver specifications: - Engraving depth: 0.01–0.4 mm - Laser wavelength: 10.6 µm - Minimum line width: 0.1 mm - Minimum character size: 0.2 mm - Repeatability: ±0.03 mm Please note that our prices for new equipment are often lower than typical used machinery prices. Simply inquire and let us know your packaging requirements. We typically have 30–50 different new machines available from stock for immediate delivery. For custom-built equipment, we offer very short delivery times starting from approximately 3 weeks. All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Module for screwing caps onto containers. - Stainless steel version (SS304); maximum idle machine cycle rate: 160 cycles/minute; cap diameter: 15-70mm; container/bottle diameter: 35-140mm; container/bottle height: 50-300mm; power supply: 220V, 2.7kW; machine dimensions: L2800 x W900 x H1880mm; weight: 400kg. Ijdpfx Asv Nk Ufeh Djih The machine/system is also available in further versions for various packaging sizes and packaging speeds. Please note that our new prices are often below the usual used-machine prices. Simply contact us and let us know your packaging requirements. - Typically, 30-50 different new machines are available from stock for immediate delivery. For machines to be custom-built to customer specifications, we offer very short delivery times starting from approx. 3 weeks. - All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Fully automatic machine for screwing caps onto containers, including a conveyor belt for integration into the packaging line. Two capping heads ensure a high output per minute by allowing two containers to be closed per cycle. The quickly interchangeable capping heads make the machine suitable for a wide range of different cap types. A precision positioning device ensures exact placement of the cap on the container before tightening. Key components: Mitsubishi PLC, Stick sensor, pneumatic components from AIRTAC. - Specifications: Maximum machine cycle rate (idle): 50 cycles/minute; Conveyor belt speed adjustable: 0-13 m/min; Cap diameter: customizable as per client specifications; Power: 220V, 3.5 kW; Compressed air: 3-5 bar, 0.1 m³; Materials used: primarily stainless steel 304; Protective panels and conveyor links made of plastic; Machine dimensions: L1450 x W850 x H1600 mm; Weight: 350 kg; Conveyor belt dimensions: length approx. 2200 mm (adjustable), width approx. 110 mm (customizable). Iedpfov Nk Ursx Ah Deih Please note that our new prices are often below common used machine prices. Simply send us your inquiry and let us know your packaging requirements. 30–50 different new machines are generally available for immediate delivery from stock. For custom-built machines, we offer very short delivery times from approx. 3 weeks. All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Sample system for volumetric filling. The system is equipped with 12 filling nozzles and piston pumps, enabling high-speed and precise filling. The filling nozzles are drip-proof and prevent foaming of the filling material. Filling volume and speed can be easily adjusted/set. Additional features: accurate filling, no filling without a bottle, very stable operation. Capacity: max. 6,000 pcs/hr (with 370ml); bottle height: 150-280mm (glass bottle); bottle diameter: 50-90mm; power supply: 1.5kW, 380V/50Hz; stainless steel 304; system dimensions: L1850xW1350xH1900mm. Includes stepless speed conveyor. Ijdpfx Asv Nla Njh Deih Please note that our new prices are often below the typical prices for used machines. Feel free to contact us and let us know your packaging requirements. - We usually have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approximately 3 weeks. - All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Sample system for volumetric filling and capping in a monoblock design. Volumetric injection pump, automatic cap orientation and closing. – Specifications: 4 or 8 filling nozzles; filling range: 20-1000 ml (optimal filling ranges: 20-100 ml, 50-250 ml, 100-500 ml, 200-1000 ml); speed: up to 5,000 bottles/h; filling accuracy: < +/- 1%; capping rate: >99%; SS316 stainless steel; power supply: 220V, 1.2-2.2 kW; compressed air: 0.6 m³, 6 bar; weight: 800-1000 kg. – All specifications are exemplary only. Please send us an enquiry with your product details (size, shape, required speed, etc.) so we can prepare a customised offer for you. Iiodpjv Nlckjfx Ah Djh Please note that our new machine prices are often below the usual prices for used equipment. Feel free to send us your enquiry and tell us about your packaging requirements. – We typically have 30-50 different new machines in stock for immediate delivery. For custom-manufactured machinery, we offer very short lead times starting from approximately 3 weeks. – All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Fully automatic tube filling machine for pastes and liquids. Typically used for cosmetics such as make-up, creams, and general care products like shower gel, hair shampoo, hair gel, toothpaste, sun cream, etc. Suitable for pre-made tubes (closed with a cap) made of plastic. Fully automatic feeding, orientation of the tubes (rotation in the tray) using the print mark, as well as filling and sealing of the tubes. Before filling, the tube is air-rinsed to prevent contamination. The no tube – no fill function is also a standard feature. Water cooling system, batch/date printer, and dosing unit consisting of a pneumatic piston pump and storage tank with level sensor are included. PLC controlled, operated via touchscreen. Optional at extra charge: heated storage tank, agitator for storage tank, additional format sets (trays) for various tube diameters, external tube feeding lift. – Specifications: max. machine cycle speed (idle): 50 cycles/min; filling range: 1-250ml; accuracy: ±1%; tube diameter: 10-50mm (a separate tray is required for each tube diameter); tube length: 50-200mm; number of filling heads: 1; storage tank capacity: 40L; product contact parts made of stainless steel 316L; power supply: 220/380V, power consumption: 7kW; compressed air: 0.4-0.6MPa; machine dimensions: L1950xW760xH1850mm; machine weight: 950kg. Please note that our new prices are often below the usual prices for used equipment. Feel free to send us an inquiry and let us know your packaging requirements. – Generally, 30-50 different new machines are always available from stock for immediate delivery. For custom-built machines, we offer very short lead times, starting from around 3 weeks. – All machines come with a full warranty. Iodpfov Nldbsx Ah Djih

Stanje: novo, Leto izdelave: 2025, Fully automatic tube filling machine for pastes and liquids. Typically used for cosmetics such as make-up, creams, general care products like shower gel, hair shampoo, hair gel, toothpaste, sunscreen, etc. Suitable for pre-made tubes (sealed with caps) made of aluminium. Fully automatic tube infeed and alignment (tube rotation in the trough) based on a print mark, as well as filling and sealing of the tubes. Prior to filling, the tubes are flushed with air to prevent contamination. No-tube-no-fill is also a standard feature. Water cooling system, batch/date coder, and dosing unit consisting of a pneumatic piston pump and storage tank with level sensor are included. PLC controlled, operation via touchscreen. Optional at extra cost: heated storage tank, agitator for storage tank, additional format sets (troughs) for different tube diameters, external tube feeding lift. – Specifications: max. machine cycle rate (idle): 80 cycles/minute; filling range: 1-300ml; accuracy: ±0.5%; tube diameter: 10-50 mm (note, each diameter requires its own trough); tube length: 50-210 mm; number of filling heads: 1; storage tank capacity: 40L; product-contacting parts made of stainless steel 316L; power supply: 220/380V; power consumption: 3.1kW; compressed air: 0.4-0.6MPa; machine dimensions: L2270xW960xH2100 mm; machine weight: 1200kg. Iedpfx Ahev Nldnj Doih Please note that our new prices are frequently below standard used equipment prices. Feel free to enquire and let us know your packaging requirements. – Typically, 30–50 different new machines are immediately available from stock. For machines manufactured to customer specification, we also offer very short lead times starting from approximately 3 weeks. – All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, High-speed tube filling machine for pastes and liquids. Typically used for cosmetics such as make-up, creams, general personal care products like shower gels, shampoos, hair gels, toothpaste, sunscreen, etc. Suitable for pre-made tubes (closed with a cap) made of plastic, aluminum, or coated composite materials. Fully automatic feeding and alignment of tubes (rotation in the holder) based on registration marks, as well as filling and sealing of tubes. Before filling, the tubes are air-flushed to prevent contamination. No-tube-no-fill function is also a standard feature. An external tube feed lift, water cooling system, batch/date printer, and dosing unit (consisting of a pneumatic piston pump and storage tank with level sensor) are included. PLC controlled, operated via touchscreen. Optional at extra cost: heated storage tank, agitator for storage tank, additional format sets (holders) for different tube diameters. Specifications: max. machine output in idle: 160 tubes/minute; filling range: 1–300 ml; accuracy: ±0.5%; tube diameter: 10–50 mm (one holder required per tube diameter); tube length: 50–240 mm; number of filling heads: 2; storage tank capacity: 70 L; all parts in contact with the product are made of 316L stainless steel; power supply: 220/380 V, power consumption: 6 kW; compressed air: 0.6 MPa; machine dimensions: L2870 x W1770 x H2340 mm. Iiodpfx Ajv Nld Ijh Djh Please note that our new prices are often lower than typical used prices. Feel free to inquire and let us know your packaging requirements. – We typically have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approximately 3 weeks. – All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Flow-Wrapping machine for wider products. Film feed from above. Servo-driven infeed, longitudinal and end sealing, PLC controlled, operation via touchscreen. “No Product – No Bag” function. – Specifications: max. machine cycle speed (no load): 100 cycles/minute; bag dimensions (not product dimensions): L(60-unlimited)xW(25-215)xH(10-65)mm, with W+H max. 215mm; suitable film width max.: 450mm; suitable film thickness: 30-75µm; number of knives: 1 unit; end sealing: rotary; number of servomotors: 3 (infeed, longitudinal, and end sealing); machine housing (standard version): painted steel; product-contacting parts: stainless steel 304; power supply: 220V, single-phase, 50Hz; rated power: 4.6kW; machine dimensions (LxWxH): 4100×1050×1500mm; weight: 810kg. Iiedpfx Ahjv Nlf Ss Doh Please note that our new machine prices are often below typical used machine prices. Simply send us your enquiry and let us know your packaging requirements. – We typically have 30-50 different new machines immediately available from stock. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. – All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Flow wrapper with box motion system for extra-wide and tall products. Film feed from above. Infeed, longitudinal sealing, and end sealing are driven by servo motors; PLC controlled; operation via touchscreen. "No product – no bag" function. - Specifications: max. machine idle speed: 40 cycles/minute; bag dimensions (not product dimensions): L(80-unlimited)xW(50-320)xH(3-140)mm, where W+H max. 320mm; suitable film width max.: 680mm; suitable film thickness: 30-75µm; number of knives: 1 piece; end sealing: oscillating (reciprocating); number of servo motors: 3 (infeed, longitudinal, and end sealing); machine housing (standard version): painted steel; product-contact parts: stainless steel 304; power supply: 220V, single phase, 50Hz; rated power: 5.7kW; machine dimensions (LxWxH): 5000×1200×1650mm; weight: 920kg. Iodpfxev Nlgvs Ah Djih Please note that our new machine prices are often below the usual prices for used equipment. Simply send us your inquiry and let us know your packaging requirements. - Usually, 30-50 different new machines are available from stock for immediate delivery. For custom-built machines, we offer short lead times starting from approximately 3 weeks. - All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Flowpack machine with bottom film feed. Intermittent operation for extra wide and tall products. Servo-driven infeed, longitudinal and end sealing, PLC controlled, operation via touchscreen. "No product – no bag" function. Specifications: Maximum machine cycle speed (idle): 15 cycles/minute; bag dimensions (not product dimensions): L(60-unlimited)xW(300-600)xH(10-200)mm, with W+H max. 600mm; suitable film width max.: 1200mm; suitable film thickness: 30-75µm; number of knives: 1 unit; end sealing: intermittent (up and down movement); number of servo motors: 3 (infeed, longitudinal and end sealing); machine frame (standard version): stainless steel 304; product-contact parts: stainless steel 304, food-grade conveyor belt; power supply: 220V, single phase, 50Hz; rated power: 6kW; machine dimensions (LxWxH): 4200x1800x1450mm; weight: 1300kg. Iedpfx Aev Nlhash Deih Please note that our new prices often undercut typical used machine prices. Feel free to send us an inquiry and let us know your packaging requirements. – We usually have 30-50 different new machines immediately available from stock. For custom-built machines, we offer very short lead times from around 3 weeks. – All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Automatic packaging machine for packing flat tea bags such as single-chamber and double-chamber bags into 3-side sealed pouches. Discharge unit for grouped tea bags. PLC controlled, operation via touch monitor. Isdpfx Ahov Nlhmo Doih - Specifications: max. machine output (idle): 120 cycles per minute; Suitable tea bag volume: max. 10cm³; Dimensions 3-side sealed pouch (LxW): 70x80mm; Material for 3-side sealed pouch: heat-sealable mono films or laminated composite film; Power supply: 220V; Machine dimensions (LxWxH): 1680x1285x1230mm; Weight: 500kg. Please note that our new prices are often lower than common used machine prices. Feel free to inquire and tell us about your packaging requirements. – We typically have 30-50 different new machines in stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from approx. 3 weeks. – All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Flow Wrapper for high-speed packaging of smaller products in longitudinally sealed flow packs. The flow pack packaging machine is suitable for packing individual or multiple, dry, uniform or non-uniform products. A special infeed system is installed upstream of the flow wrapper. The sorting and feeding of the products in line with the pushers (infeed conveyor table for flow wrapper) is handled by the six side conveyor belts driven by servo motors. This eliminates the need for manual placement of each product, which significantly increases productivity and contributes substantially to the economic efficiency of the flow wrapper. AMTEC’s flow pack packaging machine is perfectly adapted to the bag length regarding the rotating knives and their diameter, resulting in optimized speed performance. – Specifications: Suitable product dimensions: L(depending on bag length)xW(15-60)xH(5-30)mm; Bag dimensions: L(80-170)xW(15-60)xH(5-30)mm; Number of rotating knives: 3 units; Max. machine cycle rate (idle): 600 cycles/minute; Film material: BOPP/OPP (transparent, printed, or laminated); Power supply: 380V, 9.5kW; Machine dimensions: L9734xW1110xH1924mm; Weight: 3500kg. Iiedpfx Ahev Nlkhe Deh Please note that our new machine prices are often below the usual used machine prices. Feel free to contact us and let us know your packaging requirements. – We typically have 30–50 different new machines available from stock for immediate delivery. For customer-specific machines, we offer very short lead times starting from approximately three weeks. – All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Flow wrapper for high-speed packaging of smaller products in pillow bags with longitudinal seams. The flowpack packaging machine is suitable for packaging single or multiple, dry, uniform or non-uniform products. A special product infeed system is installed upstream of the flow wrapper. Sorting and feeding the products in line to the carriers (infeed table of the flow wrapper) is handled by six side belts driven by servomotors. This means the products do not need to be placed individually by hand, which provides a significant production advantage and substantially improves the flow wrapper’s cost-effectiveness. AMTEC’s flowpack packaging machine is perfectly matched to the bag length with regard to the rotating knives and their diameter, resulting in optimized speed performance. – Specifications: Suitable product dimensions: L (depending on bag length) x W (15-60) x H (5-30) mm; Bag dimensions: L (55-85) x W (15-60) x H (5-30) mm; Number of rotary knives: 4 pieces; Max. machine cycle rate in idle mode: 800 cycles/minute; Film type: BOPP/OPP (clear, printed, or laminated); Power: 380V, 9.5 kW; Machine dimensions: L 9734 x W 1110 x H 1924 mm; Weight: 3,500 kg. Iiodpfx Ajv Nlknsh Deh Please note that our new prices are often below typical used prices. Feel free to inquire and let us know your packaging requirements. – We typically have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from approximately 3 weeks. – All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Horizontal packaging machine, MINI VERSION, for pre-made doypacks, block bottom bags, or flat bags in duplex version with higher cycle speed. Modules for specific bag features such as zip/press closure, screw cap (spout), and gusset form can be integrated. Optional: batch/date printer, gas flushing module. Bag detectors check for correct placement and full opening of the doypack. Once the bag is detected, the product is dispensed into the bag via the filling spout. The sealing area is kept clean during this process. A special gripping system holds the stand-up pouch precisely in position during filling, before the doypack is closed and sealed. MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC cylinders. - Specifications: stainless steel housing (SS304); max. machine cycle speed in idle mode: 25 cycles/minute; bag width: 100-300 mm; bag length: 100-350 mm; required compressed air: 6.5 bar, 0.4 m³/min; power supply: 220V, single-phase, 2kW. Iiodpfxov Nllxj Ah Djh Please note that our new machine prices are often below the usual used equipment prices. Feel free to send us your inquiry and describe your packaging requirements. - We usually have 30–50 different new machines immediately available from stock. For custom-built machines, we also offer very short delivery times starting from approx. 3 weeks. - All machines are available with full warranty.

Leto izdelave: 2025, Stanje: novo, Horizontal packaging machine for the automatic production, filling, and sealing of flat pouches or doypacks with zip closure. Particularly suitable for small flat and stand-up pouches. Integration of various filling systems is possible (auger filler, scale, volumetric dosing, liquid, paste, and other dosing units). One pouch is processed per production step. By default, one dosing unit and one filling hopper are installed. Optionally, the machine can be equipped with an additional dosing unit and a second filling hopper, allowing either the processing of two different materials or split filling, which can increase production speed (particularly relevant for viscous products). Main components: PLC, touchscreen operator panel (menu available in various languages, e.g., English, German, etc.), temperature control. Specifications: bag sizes (min.-max.): L(90-225)xW(60-140)mm; max. filling capacity: 500ml; max. machine cycle rate (idle): 70 cycles/minute; 6.5kW; 12m³/h; machine dimensions: (L)3200x(W)1070x(H)1500mm; weight: 1600kg. All parts in contact with the product are made of stainless steel (SS304). The dosing units and/or additional add-on modules (e.g., discharge conveyor or similar) shown in the machine photo are optional equipment and are for illustrative purposes only. The machine is suitable for a wide range of composite films; the films used must have registration marks. We are happy to check and confirm compatibility on the basis of a sample. The machine/system is also available in further versions for different packaging sizes and packaging speeds. Please note that our new prices are often below the usual prices for used equipment. Just ask us and tell us about your packaging application. – Generally, 30-50 different new machines are available ex-stock for immediate delivery. For custom-manufactured machines, we offer very short lead times starting from approximately 3 weeks. – All machines come with a full warranty. Isdev Nlq Ijpfx Ah Deih

Leto izdelave: 2025, Stanje: novo, Horizontal packaging machine for the automatic production, filling, and sealing of flat pouches or doypacks with a top screw cap. Especially suitable for small flat and stand-up pouches. Integration of liquid and paste fillers is possible. One pouch is processed per production step. By default, the machine is equipped with one dosing unit and one filling hopper. Optionally, the machine can be fitted with a second dosing unit and a second filling hopper, allowing either the processing of two different materials or splitting the filling process—increasing the production speed (particularly relevant for viscous products). Main components: PLC, touchscreen operation monitor (menus available in various languages, e.g., English, German, etc.), temperature control. - Specifications: - Pouch sizes (min.–max.): L(90–225) x W(60–140) mm Isdpov Nlq Ujfx Ah Dsih - Max. filling capacity: 500 ml - Max. idle machine speed: 70 cycles/min - Power: 6.5 kW - Compressed air: 12 m³/h - Machine dimensions: (L) 3200 x (W) 1070 x (H) 1500 mm - Weight: 1,600 kg All parts in contact with the product are made of stainless steel (SS304). The dosing units and/or additional add-on modules (e.g., discharge conveyor or similar) depicted in the machine photo are optional accessories for this position and are for illustration purposes only. The machine is suitable for a wide range of composite films, provided the films have print marks. We are happy to check and confirm compatibility based on samples. The machine/system is also available in other versions for different packaging sizes and packaging speeds. Please note that our new prices are often lower than typical used equipment prices. Feel free to contact us and let us know your packaging requirements. Usually, 30–50 different new machines are available from stock for immediate delivery. For custom-built machines, we offer very short lead times, starting from just about 3 weeks. All machines come with a full warranty.

Leto izdelave: 2025, Stanje: novo, Horizontal packaging machine for the automatic production, filling, and sealing of Doypacks (stand-up pouches) with regular and irregular shapes and a corner screw cap. Especially suitable for large stand-up pouches. Integration of liquid and paste fillers is possible. One pouch is processed per production cycle. By default, one dosing unit is included, with one filling hopper installed accordingly. The machine can be equipped with an additional dosing unit and a second filling hopper, allowing either two different materials to be processed or the filling process to be split, thereby increasing production speed (particularly relevant for viscous products). Main components: PLC, touchscreen operating monitor (menu available in multiple languages, e.g., English, German, etc.), temperature control. - Specifications: pouch sizes (min.-max.); L(180-320)xW(110-240)mm; max. filling capacity: 2000ml; max. machine cycle speed without product: 50 cycles/minute; 11kW; 21m³/h; machine dimensions: (L)7900x(W)1250x(H)1550mm; weight: 3000kg. All product-contact parts are made of stainless steel (SS304). Any dosing units and/or further additional attachments (e.g. discharge conveyor, etc.) shown in the machine photo are optional extras for this model and are for illustration purposes only. The machine is suitable for a wide variety of laminated films, provided the films have registration marks. We are happy to check and confirm compatibility based on samples. The machine/plant is also available in other versions for different packaging sizes and speeds. Iiedpfx Aev Nltcsh Dsh Please note that our new prices are often lower than typical used equipment prices. Feel free to inquire and tell us about your packaging requirements. – We usually have 30–50 different new machines available immediately from stock. In addition, we offer very short lead times—starting at around 3 weeks—for machines built to customer specifications. – All machines are available with a full warranty.

Leto izdelave: 2025, Stanje: novo, Horizontal form-fill-seal packaging machine for the automatic production, filling, and sealing of doypacks (stand-up pouches) with regular or irregular shapes, featuring a corner screw cap. Especially suited for small format stand-up pouches. Integration of liquid and paste fillers is possible. Two pouches are processed per production cycle, resulting in a higher output per minute. By default, the machine is equipped with two dosing units and, accordingly, two filling hoppers. It is possible to equip the machine with two additional dosing units and hoppers, allowing either the processing of two different materials or splitting the filling process to further increase production speed (especially relevant for viscous products). Main components include: PLC, touchscreen operating monitor (menu available in multiple languages, e.g., English, German, etc.), temperature control. - Technical Specifications: • Pouch sizes (min.–max.): L(120–250)xW(110–140)mm • Max. filling capacity: 600ml • Max. machine cycle rate (idle): 110 cycles/min • Power requirement: 15.5kW • Compressed air: 30m³/h • Machine dimensions: (L)9300x(W)1100x(H)1500mm • Weight: 3400kg All parts in contact with the product are made of stainless steel (SS304). Any dosing units or additional attachments (e.g., discharge conveyor or similar), as shown in the machine photo, are optional and offered separately, included here for illustration purposes only. This machine is suitable for a variety of composite films; however, used films must have registration marks. We are happy to verify and confirm compatibility based on sample material. The machine/line is also available in other configurations for various packaging sizes and packaging speeds. Iedpfx Ahsv Nlt Ao Doih Please note that our new equipment prices are often lower than typical prices for used machines. Feel free to inquire and let us know your packaging requirements. Typically, we have 30–50 different new machines immediately available from stock. For custom-built machines, we offer very short delivery times, starting from around 3 weeks. All machines are offered with a full warranty.

Leto izdelave: 2025, Stanje: novo, Horizontally operating, intermittent, gear-driven packaging machine for the automatic production, filling, and sealing of flat pouches with regular or irregular shapes and with a top screw cap. Adjustable for 3-side or 4-side sealing. Particularly suitable for medium-sized pouches. Integration of various filling systems possible (auger filler, scale, volumetric dosing, liquid, paste, and other dosing units). One pouch is processed per production step. Main components: PLC, touchscreen operating monitor (menu available in various languages, e.g., English, German, etc.), temperature control. - Specifications: pouch sizes (min.-max.): L(80-225)xW(50-180)mm; max. fill capacity: 400ml; max. machine cycle (idle): 70 cycles/minute; 5.5kW; 15m³/h; machine dimensions: (L)4500x(W)970x(H)1500mm; weight: 1800kg. All parts in contact with the product are made of stainless steel (SS304). The dosing units and/or other additional modules (e.g., outfeed conveyor or similar) shown in the machine photo are optional extras and are displayed for illustrative purposes only. The machine is suitable for a wide range of composite films. We are happy to check and confirm compatibility based on sample material. The machine/system is also available in other versions for various packaging sizes and speeds. Please note that our new machine prices are often below the usual prices for used equipment. Feel free to contact us and let us know your packaging task. - Typically, 30-50 different new machines are immediately available from stock. For custom-manufactured machines, we offer very short lead times starting from approx. 3 weeks. - All machines are available with a full warranty. Isdpfxjv Nlu He Ah Doih

Stanje: novo, Leto izdelave: 2025, LABELshrink tunnel. Basic version with conveyor for precisely shrunk shrink labels applied solely to lids. Suitable for bottles/cans/jars without any surface rippling. Equipped with two blowers for adjustable airflow, with both slow and turbo modes. Specifications: Max. product size: Ø 120 x H400 mm; Tunnel dimensions: L1000 x W150 x H400 mm; Machine dimensions: L1530 x W400 x H1300 mm; Max. output: 200 containers/minute; Power: 380V, 9.0kW. Please note that our new machines are often priced below typical used equipment prices. Simply contact us and let us know your packaging requirements. As a rule, 30–50 different new machines are always immediately available from stock. For custom-built equipment, we also offer very short lead times starting from approx. 3 weeks. All machines come with a full warranty. Iiodov Nlw Ijpfx Ah Djh

Stanje: novo, Leto izdelave: 2025, Angle sealer for shrink film packaging, PRO version with reinforced sealing frame for consistently accurate packaging results. Suitable for medium-sized products, semi-automatic operation (manual product feed, automatic discharge). Ideally used in combination with the PRO version of the AMTEC SHRINKtunnel POF-L. Specifications: 220V, 4kW; no compressed air required; maximum machine cycle speed in idle mode: 20 cycles/minute; maximum product dimensions (mm): L(100-500)xW(100-400)xH(2-280); maximum product weight: Depends on product dimensions and how weight is distributed on the feed table; machine dimensions (mm): L1765xW810xH975; weight (net/gross): 150-200kg. For heavy products, we are happy to produce sample packaging to confirm whether the machine can process your items or, if necessary, to recommend alternative systems for your packaging requirements. For semi-automatic machines, cycle speed should also be understood as operator-dependent based on experience. Iiodpfx Aev Nlzyjh Doh Please note: our new equipment prices are often below standard used prices. Feel free to enquire and describe your packaging task to us. Typically, 30-50 different new machines are available immediately from stock. For customer-specific machines, we offer very short lead times starting at approximately 3 weeks. All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Fully automatic L-sealing machine for shrink packaging, PRO version. Features automatic product infeed and outfeed. Iedpfx Ahsv Nl Dno Deih Specifications: 220V, 2.5kW; 6 bar / 0.1m³/min; max. machine cycle rate (idle): 30 cycles/minute; max. product dimensions (mm): L(100-450)xW(60-350)xH(5-120); machine dimensions (mm): L1790xW845xH1550; weight (net/gross): 350/450kg. Please note that our new equipment prices are often below the typical used equipment prices. Feel free to contact us with your packaging requirements. We usually have 30-50 different new machines available from stock at all times. For customer-specific configurations, we offer very short lead times from approximately 3 weeks. All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Automatic side sealing machine for products with no length restrictions. PRO version featuring the so-called Kissing-Table function (movable feed conveyor) for handling short products. The sealing position (intersection of sealing bar and counterpiece) is height adjustable for a centrally positioned seal seam. Quickly exchangeable perforation needles. Ideally combined with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO version. Settings and monitoring via touchscreen for easy operation. Low-to-the-ground film loading for convenience. High packing speed. Specifications: Max. machine cycle speed (idle): 60 cycles/minute; Max. packaging size: L(80-unlimited)xW(50-420)xH(2-180) mm; Sealing blade width: 530 mm; Power: 220V/3kW; Compressed air: 6 bar; Machine dimensions: L1820xW1605xH1350 mm. Optional: Stacking systems for shrink-wrapped pallets, etc. Iedpfx Ahev Nl Ers Deih Please note that our new prices are often below typical used equipment prices. Feel free to inquire and let us know your packing requirements. – Generally, 30-50 different new machines are immediately available from stock. For machines manufactured to customer specifications, we offer very short delivery times starting from approx. 3 weeks. – All machines are supplied with a full warranty.