Sistem za dovajanje pokrova

AMTEC CAP LIFTER 1

Stanje: dober (rabljeno), Water treatment system for ISO plant by Lenhardt/Bystronic Capacity suitable for large ISO systems Dimensions: Length: 3100 mm Width: 900 mm Cjdpem Ux Stjfx Afnjpw Height: 2400 mm Weight: approx. 600 kg

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M254, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 380 V, skupna širina: 4.000 mm, skupna dolžina: 3.000 mm, skupna višina: 150 mm, Oprema: dokumentacija / priročnik, Due to the relocation of our production, this machine has been put up for sale. Our activities consist of the sale of essential oils, which were bottled using this machine. Cedevkcavspfx Afnjpw User manual available.

Stanje: novo, Leto izdelave: 2025, Automatic filling and capping system for liquid dispensing. Suitable for various liquids and oils from the food sector (still water, juices, liqueurs, olive oil, sunflower oil, etc.) as well as non-food products (perfumes, cosmetic oils, cleaning agents, etc.). The automatic filling machine is equipped with two filling heads that move both vertically and horizontally, enabling continuous filling and thus achieving a higher cycle rate. The movable filling heads of the filling machine automatically detect the position of the bottles and the diameter of the bottle neck, offering additional benefits such as minimized adjustment work and sensor settings – within a defined range. Changing to other bottle sizes is therefore made much easier, which ultimately results in shorter downtimes due to time savings. Simple adjustment to different bottle widths and heights without the need for additional format parts. After filling, bottles are transported by conveyor belt to the automatic capping machine. Cap positioning and closing are fully automatic. - Specifications: Filling range: 30-3000 ml; Number of filling heads: 2; Maximum machine cycle rate (idle): 50 cycles/min; Stainless steel version 304, product-contacting parts made of stainless steel 316; Dimensions and weight of the filling system depend on the final layout. Codpov Nk R Hefx Afnepw Please note that our new equipment prices are often below typical used equipment prices. Feel free to contact us and specify your packaging requirements. - We usually have 30-50 different new machines available immediately from stock. For machines custom-manufactured to client specifications, we offer very short delivery times starting from approx. 3 weeks. - All machines are available with a full warranty.

Stanje: rabljeno, Leto izdelave: 2022, Overview This brewhouse was manufactured in 2022 by the Chinese company JingYing. It is being sold due to the current brewery’s expansion. The brewhouse is a 3-vessel tower system, steam-heated, and in excellent, well-maintained condition. The plant still has operational warranty upon delivery and is immediately available. Technical Data - Capacity: 10 hl per batch - Configuration: 3-vessel brewhouse (mash tun/boiling kettle, lauter tun, whirlpool) - Heating system: Steam-heated - Control system: Semi-automatic PLC (controls pumps, heating, agitators, temperature profiles, recipe selection) - Fermentation: 10 cylindroconical tanks, each 20 hl (2 bar, cooling jackets, CIP, pressure gauges, sampling valves) - Cooling: Refrigeration unit, 6 HP (~4.5 kW mechanical, ~12-18 kW cooling capacity), glycol-water system, range -4 to +10 °C - Steam generator: Electrically heated, 72 kW (≈1 °C/min for 10 hl of water) - Auxiliary units: Cold water tank 30 hl (insulated, cooling jacket), malt mill 300 kg/h, CIP equipment, Tri-Clamp fittings, hoses, valves, seals, sampling devices - Additional: Set of 10 solenoid valves (one per fermenter, automatic control for individual tank cooling via shared glycol circuit) Brewhouse - Mash tun diameter: 1460 mm - Total height including switch cabinet/control: 2860 mm (this is the highest point of the system) - Platform height: 1100 mm (operator platform can be shortened as needed) CCVs - 10 x 20 hl Cpsdpfx Asxhf Sfsfnsw - Diameter: 1510 mm - Total height: 3300 mm Scope of Delivery - Brewhouse | JingYing | 10 hl, 3-vessel tower system | 2022 | Steam-heated, with PLC semi-automatic control - 10x fermentation tanks | JingYing | cylindroconical 20 hl | 2022 | 2 bar pressure, cooling jackets - Whirlpool | JingYing | 10 hl | 2022 | Tangential inlet - Cold water tank | JingYing | 30 hl | 2022 | Insulated with cooling jacket - Malt mill | JingYing | 300 kg/h | 2022 - Steam generator | JingYing | Electric, 72 kW | 2022 - Refrigeration unit | JingYing | 6 HP (~12-18 kW cooling capacity) | 2022 | Glycol system -4 to +10 °C - Platform and piping | JingYing | - | 2022 | Complete with pumps, sight glasses, valves, CIP fittings - Accessories | JingYing | - | 2022 | Tri-Clamp fittings, hoses, couplings, seals - Solenoid valve set | JingYing | - | 2022 | 10 units, for individual fermenter cooling

Stanje: rabljeno, Leto izdelave: 2018, Razvrstilnik steklenic iz leta 2018, 8-10.000 steklenic na uro, popolnoma funkcionalen, za okrogle PET ali HDPE steklenice Csdewgvxpepfx Afnspw

Stanje: novo, Leto izdelave: 2025, Fully automatic liquid filling system with 4 filling heads, suitable for various filling ranges (e.g. 50ml to 500ml) – can be customised to customer requirements. Within the filling range, the filling volume can be precisely adjusted by changing the air cylinder stroke – easily managed via software, with no need for additional modules. Cpsdpfev Nk Rmox Afnjw Operating principle: Bottles are fed in via conveyor belt, automatically positioned, filling needles are inserted into the bottles, and filling takes place via filling lances. The dosing is controlled by air cylinders. The filling lances feature a special stop mechanism to prevent dripping. Key electronic components: Siemens PLC and touchscreen, Sick sensors, Panasonic frequency inverter. Pneumatic components mainly from AIRTAC. CIP self-cleaning hardware and software are included and customised to client requirements. - Specifications: Number of filling heads: 4; Maximum machine cycle rate (idle): 26 cycles/min; Accuracy depends on selected filling range and actual filling volume; Stainless steel version SS304 – all product-contact parts in SS316; Power supply: 220V / 0.5kW; Air pressure: 4-6bar, 0.4m³; Machine dimensions (LxWxH): 2500x1070x1800mm; Weight: 850kg. Optional dosing via servo motors instead of air cylinders is available at an extra charge. Servo version dimensions (LxWxH): 2500x1300x1900mm. The machine/system is also available in additional versions for various packaging sizes and speeds. Please note that our new prices are often lower than typical used market prices. You are welcome to enquire directly and let us know your packaging requirements. Usually, we have 30–50 different new machines in stock for immediate delivery. For customised machines, we offer very short lead times starting from approximately 3 weeks. All machines are sold with full warranty.

Stanje: rabljeno, Leto izdelave: 2013, Overview Complete filling line from the food sector by the German manufacturer Breitner (2013). It was previously used for filling liquid cheese products and closed with snap-on and screw caps. Spray pumps with dip tubes can also be handled. Various additional features, such as a laminar flow system and a particular focus on hygienic design, allow for cleanroom classification. Cpsdexqzmwspfx Afnow Machines: Pos. 1 Bottle Unscrambler Breitner BFC 8002 (2013), 6,000/hour Pos. 2 Filling Machine Breitner MDL 2086 (2013), 5,000/hour Pos. 3 Rotary Capper Breitner SRT 5044 (2013), 5,000/hour All conveyors: Chain width: 82.5 mm, AISI 304 Unsealed containers: Plexiglas cover Bottle and cap formats: Our Service: Send us your requirements and we will check the possibility of processing your bottle format. Closure formats: Screw caps, snap-on caps, spray pumps with dip tubes 1. Bottle Unscrambler BREITNER BFC 8002 Mode of operation: continuous from feed hopper Container volume / drum diameter: 1.4 m³ / 1500 mm Working height: 900 mm, left → right Material / housing: AISI 304 stainless steel + Plexiglas Safety: Door switch, overload protection Power / air: 3 × 400 V, 4 kW / 400 Nl/min at 6 bar Container size: round Ø ≤100 mm × 250 mm, larger on request Special feature: Blow-cleaning station with ionized air and dust extraction 2. Filling Machine BREITNER MDL 2086 Filling method: mass flow, 8 stations (expandable to 12) Filling range: 100 - 2000 ml/g, up to 5,000 bottles/hr Working height/direction: 900 mm, left → right Product contact parts: AISI 316, food-safe hoses, VITON seals Tank / pressure: 100 L, 5 bar Electrical / air: 3 × 400 V, 4 kW / 150 Nl/min at 6 bar Container size: H 50-350 mm, Ø/width 50-80 mm, various shapes CIP cleaning: automatic cleaning & discharge, multi-stage program Extras: Laminar flow, remote maintenance, additional filling valves, swiveling tray, heating system 3. Rotary Capper BREITNER SRT 5044 Mode of operation: continuous rotary, 4 capping stations Capacity: up to 5,000 containers/hour Container size: Ø ≤100 mm, H ≤300 mm Working height / direction: 900 mm, left → right Drive / tools: servomotor, 0.3-3.5 Nm; BREITNER capping tools Power / air: 3 × 400 V, 4 kW / 100 Nl/min at 6 bar Control: B&R control, touchscreen, 200 format memory, password protected Safety & control: Door switch, overload, 'No bottle – no cap', optical closure inspection, discharge system Extras: Servo-driven vertical movement, torque monitoring, fan-assisted cap feeder, vibration sorter, cap feed

Stanje: novo, Leto izdelave: 2025, Automatic shrink-sleeve labeling machine with a capacity of up to 400 cycles/minute (shrink-sleeve length 150mm). Shrink tunnel included. Stainless steel version (SS304), cutter driven by servo motor, no-bottle-no-label feature, sleeve label feed device with speeds of up to 90m/min for fast and precise production. Brushes secure the sleeve label in the correct position, bottle positioning device, adjustable machine height according to bottle size. MITSUBISHI PLC, WEINVIEW touchscreen. — Specifications: up to 400 cycles/min (with a sleeve label length of 150mm); sleeve label Ø: 28–50, 50–95, or 95–125mm; sleeve label length: 35–300mm; sleeve label thickness: 0.035–0.08mm; power: 2kW; machine dimensions: L6400 x W1100 x H2600mm; weight: 1500kg. Please note that our prices for new machines are often below the typical prices for used ones. Please feel free to contact us and let us know your packaging requirements. — Normally, we have 30–50 different new machines available from stock for immediate delivery. For customer-specific machines, we offer very short delivery times, starting from approx. 3 weeks. — All machines are available with a full warranty. Codov Nlavspfx Afnepw

Stanje: novo, Leto izdelave: 2025, Fully automatic liquid filling system with 6 filling heads, suitable for various filling ranges—for example, from 50ml to 500ml—customizable according to customer requirements. The filling volume within the specified range can be individually adjusted by modifying the displacement of the pneumatic cylinders—easily managed via software control without the need for additional modules. Codpfxev Nk Rto Afnspw Operation: Bottles are fed via a conveyor belt, then positioned. The filling needles are inserted into the bottles; filling is performed by filling lances with dosing controlled by pneumatic cylinders. The filling lances feature a special stop mechanism to prevent liquid dripping. Relevant electronic components: PLC and touchscreen from SIEMENS, detection sensors from Sick, frequency converter from Panasonic. Pneumatic components predominantly from AIRTAC. CIP self-cleaning hardware and software are included and can be customized as per requirements. - Specifications: Number of filling heads: 6; maximum machine cycle rate (idle): 35 cycles/min; accuracy: depends on selected filling range and actual filling volume; stainless steel version SS304, all product-contact parts made of SS316; power: 220V, 0.5kW; air pressure: 4-6 bar, 0.4m³; machine dimensions (LxWxH): 3500x1350x1800mm; weight: 850kg. Optional: Servo motor dosing instead of pneumatic cylinders available at extra cost. Servo version machine dimensions (LxWxH): 3500x1350x1900mm. This machine/system is also available in other versions for different packaging sizes and speeds. Please note that our new prices are often below typical used equipment prices. Feel free to contact us with your specific packaging requirements. We usually have 30-50 different new machines in stock and immediately available. For customized machines, we offer very short lead times starting from approx. 3 weeks. All machines come with a full warranty.

Stanje: dober (rabljeno), Leto izdelave: 2002, FLEXICON FMB 100 Liquida polnilni in zapiralni stroj za viale / stekleničke Ta enopostajni rotacijski stroj z največjo zmogljivostjo do 75 polnjenj/min (odvisno od dozirnega volumna in izdelka) je zasnovan za polnjenje in zapiranje vial. Dozirni volumen: 0,1 - 250 ml Vključuje formate za 2 ml viale / stekleničke Ø 22 x 31 mm višina in navojne pokrovčke Ø 23 x 12 mm višina Proizvajalec: Flexicon Letnik izdelave: 2002 Prostorske zahteve: 210 x 140 x 195 cm Cedpfxoxvzn So Afnspw