Amtec nakup rabljenega (594)

Stanje: novo, Leto izdelave: 2025, Complete version of the vertical packaging system with auger dosing unit, screw conveyor, and discharge conveyor belt. Suitable for packaging powdery products with either high or low flowability. The vertical packaging machine (VFFS) is equipped with the following components: PLC (touchscreen operator monitor, available in various languages, e.g., English, German, etc.), date printer, automatic program setup, mark sensor, quick-change forming unit, pneumatic sealing unit, servo motor for film transport (double transport possible), air separator/extraction device (removes air from the bag before sealing—no vacuum is generated), holding device for heavy finished bags, Euro slot punching device, suitable for OPP and PE film (PE unit available at extra cost if required). Specifications of the VFFS packaging machine: Filling range: up to 3000ml; Film width: max. 520mm; Bag size min-max: L(80-400)xW(80-250)mm; max. idle machine cycle rate: 50 cycles/minute; Stainless steel 304; 220V, 4kW; 6bar, 0.3m³/min; Machine dimensions: LxWxH: approx. 1150x1790x1650mm; Weight: 600kg. Specifications of auger dosing unit: Filling capacity up to 50l (hopper); Filling range: 10-1000g; max. idle machine cycle rate: 50 cycles/min; Accuracy: ±0.3~1.5% (depending on product); 380V, 2.5kW; Dosing unit dimensions LxWxH: 690x1030x1100mm; Weight: 150kg. Screw conveyor for automatic material transfer to the dosing unit. Vibration motor ensures uniform product flow. Feed hopper with up to 150 liters volume. Size depends on the customer-specific final system. Specifications: Hopper, conveyor length and angle can be customized to product or customer requirements; overall dimensions depend on this. Conveyor length: 3~4m; stainless steel 304; Conveyor speed: 3.0m³/h - 12.0m³/h; 380V, 0.8kW-4.1kW; Weight: 130kg – 270kg. Deviation of the stated specifications is possible. Support bar optionally available. The discharge conveyor features a stainless steel frame. Specifications: Conveyor speed: 30m/min; 220V, 0.55kW; Dimensions LxWxH: approx. 1850x550x1230mm; Weight: 80kg. Complete system dimensions: approx. 2350xW3590xH2500mm, depending on final configuration. The system must be adapted to customer-/product-specific requirements; therefore, deviations in the stated specifications of the modules and machines may occur. Main components: Colored SIEMENS touchscreen display, SIEMENS PLC controller, SIEMENS servo motor, AIRTAC cylinder, AIRTAC solenoid valve, OMRON relay, SIEMENS servo motor for film transport. Lodpov Nmkvefx Al Dsrt The machine/plant is also available in further versions for various packaging sizes and packaging speeds. Please note that our new prices are often below the usual prices for used machines. Feel free to inquire and let us know your packaging requirements. – Typically, there are always 30-50 different new machines available from stock for immediate delivery. For custom-manufactured machines, we offer very short lead times starting from approximately 3 weeks. – All machines come with a full warranty.

Leto izdelave: 2025, stanje: novo, Complete version of the vertical packaging system with auger dosing unit, screw conveyor, and discharge conveyor belt. Suitable for packaging powdery products with high or low flowability. The vertical form fill seal machine (VFFS) is equipped with the following features: PLC (touchscreen control monitor available in multiple languages, e.g., English, German, etc.), date printer, automatic program setup, registration mark sensor, quick-change forming unit, pneumatic sealing unit, servo motor for film transport, double transport possible, air displacement/extraction device (removes air from the bag before sealing – a vacuum is not created), support device for heavy finished bags, euro slot punching device, suitable for OPP and PE film (PE unit may incur additional cost). - VFFS Packaging Machine Specifications: Filling range: up to 5000ml; film width: max. 620mm; bag size min-max: L(100-400)xW(180-300)mm; max. idle cycle rate: 45 cycles/minute; Stainless steel 304; 220V, 5kW; 6bar, 0.3m³/min; packaging machine dimensions LxWxH: approx. 1780x1850x1950mm; weight: 700kg. - Auger Dosing Unit Specifications: Filling capacity up to 50l (hopper); filling range: 10-5000g; max. idle cycle rate: 40 cycles/min; accuracy: ±0.3~1.5% (depending on product); 380V, 3kW; dosing unit dimensions LxWxH: 600x1250x1200mm; weight: 220kg. - Screw conveyor for automatic conveying of material to the dosing unit. The vibration motor ensures even product flow. Feed hopper with up to 150-liter capacity. Size depends on customer-specific end setup. Specifications: Hopper, conveyor length and angle can be adapted according to customer/product-specific requirements, hence total dimensions will vary. Conveyor length: 3~4m; stainless steel 304; conveying speed: 3.0m³/h – 12.0m³/h; 380V, 0.8kW-4.1kW; weight: 130kg – 270kg. Deviations in the specified specifications are possible. Support bar optionally available. - The discharge conveyor has a stainless steel frame. Specifications: conveying speed: 30m/min; 220V, 0.55kW; dimensions LxWxH: approx. 1850x550x1230mm; weight: 80kg. Lsdpfxev Nmk Aj Al Dsrt Dimensions of the complete system: approx. L2980xW3650xH2600mm, depending on final configuration. The system must generally be adapted to customer/product-specific requirements. As such, module and machine specifications may differ as indicated. Key components: Colored SIEMENS touchscreen display, SIEMENS PLC control unit, SIEMENS servo motor, AIRTAC cylinders, AIRTAC solenoid valve, OMRON relays, SIEMENS servo motor for film transport. The machine/system is also available in further versions for various packaging sizes and packaging speeds. Please note that our new prices are often below the standard used prices. Feel free to contact us and let us know your packaging requirements. Usually, 30-50 different new machines are immediately available from stock. For machines that need to be custom-built, we offer very short delivery times starting at approx. 3 weeks. All machines are available with a full warranty.

Leto izdelave: 2025, stanje: novo, Complete dosing and packaging system for liquids, including tank, pump, and discharge conveyor. Suitable for both viscous and non-viscous liquids such as creams, toothpaste, body lotion, shampoo, mayonnaise, ketchup, honey, jam, edible oil, vinegar, juice, milk, etc. The vertical form-fill-seal (VFFS) packaging machine is equipped with the following components: PLC (touchscreen control panel, available in various languages such as English, German, etc.), date printer, automatic program setup, registration mark sensor, quick-change forming set, pneumatic sealing unit, servo motor for film transport (double transport possible), air separation/extraction device (removes air from the pouch before sealing—does not generate vacuum), support device for heavy finished pouches, Euro-slot punching device, suitable for OPP and PE film (PE unit available at extra charge if required). Specifications of the VFFS packaging machine: Dosing range: up to 3000 ml; film width: max. 520 mm; pouch size min–max: L(80–400) x W(80–250) mm; max. machine speed without load: 50 cycles/min; stainless steel 304; 220V, 4kW; 6 bar, 0.3 m³/min; machine dimensions (LxWxH): approx. 1150 x 1790 x 1650 mm; weight: 600 kg. Tank and pump specifications: Tank capacity approx. 50 l (customization possible); height approx. 70 mm; pump available in various versions, e.g.: 10–150 ml, 150–500 ml, 500 ml–1L, 1L–2L, 2L–5L, etc. The pumping system is adapted to your individual products based on samples provided. Specifications and product feed may vary accordingly (surcharge possible). The discharge conveyor features a stainless-steel frame. Specifications: conveyor speed 30 m/min; 220V, 0.55 kW; dimensions (LxWxH): approx. 1850 x 550 x 1230 mm; weight: 80 kg. Dimensions of the complete system: approx. L1080 x W3640 x H1720 mm, depending on final configuration. The system must be customized to customer- and product-specific requirements. Therefore, the specified data may deviate depending on the modules and machines supplied. Key components include: Colored touchscreen display SIEMENS, PLC control unit SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, servo motor for film transport SIEMENS. Lsdpfsv Nmlaox Al Dert The machine/system is also available in other designs for various packaging sizes and speeds. Please note that our new prices are often below typical used machine prices. Simply inquire and let us know your packaging requirements—we’re happy to advise. We typically have 30–50 different new machines in stock and available for immediate delivery. For custom-built machines, we offer very short lead times from about 3 weeks. All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, I-, Z- or L-shaped belt conveyor for transporting small or large-volume, wet/moist, or deep-frozen products to the weighing unit. Open design, corrugated sidewalls, water-resistant, product-contacting parts made of polyurethane and certified according to FDA 21 CFR 177.2600. - Specifications: Conveyor pocket dimensions: L (customizable to product) x W 250 x H 50 mm; stainless steel frame; adjustable conveyor speed; conveyor dimensions: L (depending on incline) x W 450 x H 3000 mm. The machine/system is also available in further designs for various packaging sizes and packaging speeds. Please note that our new machine prices are often below usual used equipment prices. Feel free to inquire and let us know your packaging requirements. - Typically, 30-50 different new machines are available from stock at all times. For custom-built machines, we also offer very short delivery times from approx. 3 weeks. - All machines are available with a full warranty. Ledpfx Alsv Nml To Djrt

Stanje: novo, Leto izdelave: 2025, Feed conveyor, transport system with extra-large plastic containers designed to carry product from the vibrating feeder to the weighing unit. Stainless steel construction; 380V/1kW; dimensions and weight depend on the customer's overall system configuration. The machine/system is also available in various versions for different packaging sizes and packaging speeds. Lodpfxsv Nmmwe Al Djrt Please note that our new prices are often below typical used market prices. Feel free to enquire and let us know your packaging requirements. – Usually, 30-50 different new machines are immediately available from stock. For custom-built machines, we offer very short delivery times starting from just 3 weeks. – All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Conveying system for small quantities of free-flowing products (rice, sugar, beans, etc.). Stainless steel with large hopper (60 liters). The hopper is manually filled in the lower position. It is automatically emptied in the upper position (complete cycle: 1 minute). Suitable as a feeder for smaller systems with volumetric cup or 2- and 4-head systems. - Specifications: Max. height: 3-5m; machine dimensions: L1400xW700xH3500mm; 220V/1kW. Please note that our new prices are often below typical used equipment prices. Feel free to contact us and inform us of your packaging application. – We normally have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. – All machines are supplied with full warranty. Ljdpfxjv Nmnhj Al Djrt

Stanje: novo, Leto izdelave: 2025, Sleeve wrapper/film banderoler for packaging very large products. Includes shrink tunnel. The film overlaps underneath the product and is bonded by heat (no welding). Automatic product feed, automatic transport into the tunnel, and outfeed. - Sleeve Wrapper Specifications: - Max. machine cycle (idle): 20 cycles/minute - Max. product dimensions: L (unlimited) x W (W+H max. 600mm) x H (max. 300mm) - Film width: max. 1600mm - Seal bar length: 700mm - Operating temperature: up to 200°C - Conveyor height: 850mm +/- 50mm - Power: 220/380V, max. 1.8kW - Air pressure: approx. 6-8bar - Machine dimensions and weight: L2014 x W1488 x H1850mm, 600kg Lrjdpfxov Nl Rho Al Det - Shrink Tunnel Specifications: - Max. product dimensions: L (unlimited) x W 400 x H 300mm - Operating temperature: up to 400°C - Conveyor height: 850mm +/- 50mm - Power: 220/380V, max. 20kW - Tunnel dimensions: L1500 x W600 x H400mm - Machine dimensions and weight: L2400 x W900 x H1690mm, 500/550kg Please note that our new prices are often below the usual used equipment prices. Feel free to inquire and let us know your packaging requirements. Generally, we always have 30–50 different new machines in stock and immediately available. For custom-built machines, we offer very short delivery times from approx. 3 weeks. All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Sidesleever for fully sealing products in heavy-duty PE film. All four sides are completely welded. XL version for especially large products, including a matching shrink tunnel. Ideal for dust protection and as transport packaging. Cost-effective packaging solution even for large products up to W+H. Lrodpfx Aljv Nl Rnj Dot

Stanje: novo, Leto izdelave: 2025, Sidesleever for fully enclosing products in strong PE film. All four sides are completely sealed. XXL version designed for very large products, including a matching shrink tunnel. Ideal for dust protection and as transport packaging. Cost-effective packaging solution even for large products up to W+H. Lodpfx Aljv Nl Ruo Dsrt

Stanje: novo, Leto izdelave: 2025, High-speed sleeve shrink machine for multipacks of bottles, cans, etc., including a module for automatically adding cardboard trays underneath the multipack and a shrink tunnel. Suitable for container arrangements of 2x3, 3x4, 4x6, or other configurations. Compatible with PE shrink film with a thickness of 60-100µm, film shrinkage in transverse direction of 30-40%, and lengthwise shrinkage of 60-70%. Ljdpfx Aev Nl R Iol Dert - Specifications: PLC control and touchscreen by SIEMENS, AC switches by SCHNEIDER, cylinders by FESTO, SIEMENS servo motors for film feed and cutting. Suitable for bottles, cans, or containers from 0.25 to 1.5 liters; diameter: 50-120mm, height: 120-300mm; max. dimensions for the complete multipack: L(150-720)xW(250-450)xH(120-300)mm; max. machine cycle rate in idle mode: 45 cycles/min; machine dimensions: L6800xW1650xH2270mm; weight: 5500kg; power: 380V, 9kW (machine) and 380V, 63.75kW (shrink tunnel); compressed air: 160 liters/min, 6 bar. Please note that our new prices are often below standard used market prices. Feel free to inquire and let us know your packaging requirements. Typically, 30-50 different new machines are available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from around 3 weeks. All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, ECONOMY version of the POF-L shrink tunnel for medium-sized products. Suitable for polyolefin films. Very attractive price due to the use of some non-branded components. Speed and temperature adjustable. - Specifications: 380V, 9.0kW; Speed: max. 0-10m/min; Max. product dimensions (mm): W400xH200; Machine dimensions (mm): L1300xW715xH1455; Weight (net/gross): 185/235kg. Ljdpfx Asv Nl Slsl Dort Please note that our prices for new equipment are often lower than the typical prices for used machines. Feel free to ask and tell us about your packaging requirements. - We usually have 30-50 different new machines available ex stock for immediate delivery. For machines manufactured to customer specifications, we offer very short delivery times starting from approx. 3 weeks. - All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Shrink tunnel for medium-sized products. Suitable for polyolefin films. Adjustable speed and temperature (up to 175°C). – Specifications: 380V, 12 kW; speed: max. 15m/min; max. product dimensions (mm): W450 x H220; machine dimensions (mm): L1600 x W770 x H1450; weight (net/gross) 250/310kg. Lredov Nl S Ejpfx Al Djt Please note that our new prices are often below the typical prices for used equipment. Feel free to contact us and tell us about your packaging requirements. – We usually have 30-50 different new machines available from stock at any time. For custom-built machines, we offer very short delivery times, starting from approx. 3 weeks. – All machines are supplied with full warranty.

Stanje: novo, Leto izdelave: 2025, Shrink tunnel for extra large/wide products. Suitable for polyolefin films. Speed and temperature adjustable. Can be combined with the SIDEshrink W20-XXL. - Specifications: 380V, 15 kW; Speed: max. 15 m/min; Max. product dimensions (mm): W1500 x H250 (can be adapted if required); Machine dimensions: L2840 x W1560 x H1310 mm; Weight (net/gross): 450/550 kg. Lredpfx Asv Nl Tiel Dot Please note that our new prices are often below the typical used equipment prices. Feel free to contact us and provide details about your packaging requirements. We usually have 30–50 different new machines available from stock for immediate delivery. For machines manufactured to customer specifications, we offer very short lead times starting from approx. 3 weeks. All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, The SHRINK tunnel can be combined with the AMTEC Shrink Wrapper SPEEDshrink 35M. High-speed shrink performance with 0-20 m/min for POF (polyolefin) film. Max. package dimensions: W400 x H250 mm, tunnel size: L1500 x W500 x H300 mm. Power supply: 380V, max. 16 kW. Machine dimensions and weight: L1800 x W990 x H1300 mm, 650 kg. Lodev Nl Tpjpfx Al Dsrt Please note that our new prices are often below standard used equipment prices. Feel free to contact us and let us know your packaging requirements. – We typically have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we also offer very short lead times starting from approximately 3 weeks. – All machines are supplied with full warranty.

Stanje: novo, Leto izdelave: 2025, SHRINK tunnel can be combined with the AMTEC Shrink Wrapper SPEEDshrink 35L. High-speed shrink wrapping with 0-20 m/min for POF film (polyolefin). - Specifications: Max. packaging dimensions: W550xH250mm, tunnel size: L1500xW650xH300mm, power supply: 380V, max. 18kW, machine dimensions and weight: L1800xW1140xH1300mm, 700kg. Lrodpfxev Nl Tve Al Dot Please note that our new equipment prices often undercut typical used machine prices. Simply get in touch and let us know about your packaging requirements. – We typically have 30-50 different new machines available from stock for immediate delivery. For customer-specific machines, we offer very short lead times starting from approximately 3 weeks. – All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Shrink tunnel for large products, PRO version for perfectly consistent temperature, ideal in combination with the AMTEC MAXIshrink W20XXL PRO version. Suitable for polyolefin films. Speed and temperature are adjustable. - Specifications: 380V, 30 kW; Speed: 0–30 m/min; Temperature: up to 175°C; Max. product dimensions (mm): W700 x H300; Machine dimensions (mm): L2100 x W950 x H1315; Weight (net/gross): approx. 350/400 kg Please note that our new prices are often lower than the usual prices for used equipment. Feel free to inquire and let us know your packaging requirements. – We generally have 30–50 different new machines available from stock for immediate delivery. For machines made to customer specification, we offer very short lead times starting from approximately 3 weeks. – All machines come with a full warranty. Lrjdpfx Ajv Nl Ugsl Det

Stanje: novo, Leto izdelave: 2025, PRO version of the shrink tunnel for high-speed processing of products in POF film. Can be combined with the AMTEC Shrinker SPEEDshrink W40L (vertical) PRO version and AMTEC Shrinker SIDEshrink W60XL PRO version. Features double air circulation and adjustable airflow, suitable for large products and/or high-speed packaging (recommended for use with SIDEshrink and FLOWshrink machines). - Specifications: Max. product dimensions: L(unlimited)xW400xH300; tunnel size: L1700xW450xH350; machine dimensions: L2200xW1000xH1230mm; power consumption: 380V, 15kW. Lrsdpfjv Nl Uysx Al Det Please note that our new machine prices are often lower than standard used equipment prices. Feel free to contact us and let us know your packaging requirements. - We generally have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. - All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, PRO version of the shrink tunnel designed for processing very large products in POF film at high speeds. Ideal in combination with the AMTEC Shrinker SPEEDshrink W40XXL (vertical) PRO version. Features double air circulation, adjustable airflow, suitable for large products and/or high-speed packaging (recommended for SIDEshrink and FLOWshrink machines). - Specifications: Max. product dimensions: L(unlimited)xW800xH300mm; tunnel dimensions: L2400xW850xH400mm; machine dimensions: L2400xW1320xH1750mm; power consumption: 380V, 24kW. Ledpfx Alov Nl U Tj Djrt Please note that our new equipment prices are often lower than typical used equipment prices. Feel free to contact us and let us know your packaging application. Generally, we have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from approximately 3 weeks. All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Packaging line for the production and packaging of wet wipes, such as hygiene wipes, cleaning wipes, moist care wipes, and disinfectant wipes. The line consists of a wet wipe production unit and a flow-wrapping (flowpack) packaging unit. Wet wipe production process: unwinding of nonwoven fabric from 2 parent rolls and longitudinal slitting into 5 lanes per roll (up to the moistening stage), enabling high-speed production; longitudinal folding into Z- or C-shape; moistening via multiple spray nozzles; cross-cutting (wipe length); stacking and transfer to the packaging unit. The flowpack packaging unit feeds in the wet wipes, supplies the film, and performs printing (hot-foil coding), punch-out for tissue removal, placement of the resealable label and, for example, a seal label (the integrated dual-lane labeler enables offset labeling), pouch cutting/sealing by heat-sealing. The liquid supply system for moistening the wipes consists of two tanks with continuous mixing agitators and a liquid recirculation unit. - Specifications: - Suitable for dry nonwovens (spunbond) - Fold: Z- or C-fold (change of folding tool required) - Fold surface on each side adjustable - Folded wipe dimensions: L(120-220)xW(90-110)mm - Unfolded wipe dimensions: L(120-220)xW(150-220)mm - Number of wipes per pack (min. to max.): 30-120 wipes - Wet wipe grammage: 40-80g/m² - Machine output (no load): max. 5,600 wipes/min or max. 60 packs/min - Bag size: dependent on fold size and number of wipes per pack - Film roll dimensions: width up to 360 mm, diameter up to 400 mm - Suitable films: OPP film (transparent, printed, or laminated) - Parent roll for nonwoven width: 800-1320mm, diameter max. 1200mm - Label roll dimensions: width up to 60mm, diameter up to 300mm - Liquid tank dimensions: 900x900x1900 mm - Packaging line dimensions: L13998xW5404xH2350 mm - Total weight: approx. 10,600 kg - Power: 19kW, 380V, 3-phase The photo only shows the main machine (wet wipe production). Images of the packaging and lid-sealing units are available upon request. Lrsdpfx Asv Nmawel Dst Please note that our new prices are often below typical used prices. Feel free to contact us and let us know your packaging requirements. We typically have 30-50 different new machines immediately available from stock. For customer-specific machines, we offer very short delivery times starting from around 3 weeks. All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Automatic tray sealer including a module for creating a protective atmosphere. Optionally, a protective gas mixture and/or vacuum can be generated inside the trays before sealing with film. For an additional charge, a skin vacuum module can be integrated into the packaging machine. The AMTEC tray sealer is therefore particularly suitable for products from the food industry, as displacement of oxygen helps keep food fresher for longer and extends shelf life. Ribbon printer for best-before date or batch number is included in the price. PLC from OMRON, touchscreen from WEINVIEW, servo motors from Panasonic, pneumatic valves and cylinders from AIRTAC. - Specifications: 2-lane version; Seal chamber size: L450xW(200-400)mm, processing of multi-trays possible within this range (for an extra charge); max. machine cycle rate idle: 12 cycles/min (sealing only) or 5 cycles/min (vacuum/protective gas generation and sealing); gas mixture: N2 or N2+CO2; protective gas supply pump capacity: 63m³/h; machine dimensions: L2950xW1040xH1700mm. Lodpov Nmb Uefx Al Dert Please note that our new prices are often below the usual prices of used machines. Feel free to inquire and tell us about your packaging requirements. - We usually have 30-50 different new machines in stock and immediately available. For machines manufactured to customer specifications, we also offer very short delivery times from approx. 3 weeks. - All machines are available with a full warranty.

Leto izdelave: 2025, stanje: novo, Weighing unit with 14 weighing heads (springless hoppers), each with a 4.0-liter capacity for extremely precise weighing. Special design for wet environments and/or products (protection class IP67) where the machine needs to be cleaned frequently (salads, pet food, frozen products up to 150mm, non-food items, etc.). Specifications: Max. machine cycle rate in idle mode: 80 cycles/minute; weighing range: 10-3000g; accuracy: +/-0.5-2.0g; touchscreen operation (large version). Stainless steel, 220V/2.5kW, dimensions L2106xW1466xH1758mm, 800/850kg. The machine/system is also available in further versions for various packaging sizes and speeds. Please note that our new equipment prices are often below typical used equipment prices. Feel free to inquire and let us know your packaging task. Typically, 30-50 different new machines are available from stock for immediate delivery. For custom-built machines, we offer short lead times starting from approx. 3 weeks. All machines come with a full warranty. Lredpfx Aov Nmrtsl Dot

Leto izdelave: 2025, stanje: novo, Multihead weigher with 14 weighing heads (large hoppers for bulky products) for extremely accurate weighing. High-precision special load cells with a resolution of up to 2 decimal places. Special design for salads or similar products. Dimpled surface, adjustable rotating top cone, improved linear vibrator to enhance material flow. - Specifications: max. machine cycle rate (idle): 80 cycles/minute; weight range: 10-3000g; accuracy: +/- 1~8g; weighing container capacity: 5L; 7" touchscreen; stainless steel; power: 1.0kW, 220V, 12A; scale dimensions: L2195xW1380xH2060mm; weight: 850kg. The machine/system is also available in further versions for various packaging sizes and packaging speeds. Lrjdov Nmr Hepfx Al Dot Please note that our new equipment prices are often lower than the usual second-hand prices. Feel free to inquire and let us know your packaging requirements. - We usually have 30-50 different new machines available from stock at all times. For custom-built machines, we offer very short delivery times from around 3 weeks. - All machines come with full warranty.

Stanje: novo, Leto izdelave: 2025, Multihead weigher with 32 weighing heads, each with a 0.8-liter hopper, specifically designed for mixing up to 4 products. – Specifications: max. machine cycle rate (idle): 80 cycles/min; weighing range: 10–3000g; accuracy: +/- 0.1–2g (depending on product); protection class: IP65; power supply: 220V, 4kW; stainless steel 304; machine dimensions (approx.): L1960 x W1890 x H1588mm; weight: 760kg. Optional at extra cost: weighing heads with 1.6L or 2.5L hoppers. The machine/system is also available in other versions for various packaging sizes and packaging speeds. Please note that our new prices are often below the standard used equipment prices. Feel free to contact us and tell us about your packaging requirements. – We typically have 30-50 different new machines available in stock for immediate delivery. For custom-built machines, we offer very short lead times starting at around 3 weeks. – All machines are available with a full warranty. Ljdpov Nmtqofx Al Djrt

Leto izdelave: 2025, stanje: novo, Linear weigher with spiral conveyor for shredded or pulled meat such as gyros, kebab, pulled pork, or also minced meat, fresh moist fruits, fresh vegetables, etc. Weighing range from 10g to 3000g. Two weighing heads with load cells enable fast and precise portioning. Specifications: Weighing container capacity: 5 L; Number of weighing heads: 2; Weighing range: 10-3000g; Accuracy: +/- 1-10g; Maximum machine cycle rate (idle): 20 cycles/minute; Power supply: 220V, single-phase; Control via touchscreen; Stainless steel version SUS 304. Lsdpfx Alov Nmuhj Dert The machine/system is also available in other versions for various packaging sizes and packaging speeds. Please note that our new equipment prices are often below typical used equipment prices. Please feel free to contact us and tell us about your packaging application. – We usually have 30–50 different new machines available from stock for immediate delivery. For customer-specific machines, we offer very short lead times starting from just 3 weeks. – All machines are offered with full warranty.

Stanje: novo, Leto izdelave: 2025, Extra large linear weighing unit for high-volume products with 2 weighing heads. - Specifications: Weight range: 5–50 kg; max. machine cycle rate (idle): 20 cycles/minute; accuracy: 0.2% (depending on product); power: 2.0 kW; machine dimensions: L3300 x W3000 x H4700 (including 1400 mm support frame/customizable); weight: 1800 kg. The machine/system is also available in further versions for various packaging sizes and packaging speeds. Lrsdjv Nmu Uepfx Al Dst Please note that our new prices are often below the typical prices for used units. Simply contact us and tell us about your packaging requirements. – We usually have 30–50 different new machines available for immediate delivery from stock. For custom-built machines, we also offer very short lead times, starting from approx. 3 weeks. – All machines come with a full warranty.