Škarjasto Valjčno Progo, L: 1.730 - 3.880 Mm nakup rabljenega (112.988)

Stanje: novo, Tehnični podatki za prečno palico za paletni regal: Sistem regalov: Stow Tip: Pal Rack NS Vsebina dobave: 01x Prečna palica za paletni regal, nova Barva materiala: RAL 2004 oranžna Profil prečne palice: 160 x 50 mm Tip prečne palice: PNB0436 Objemke: 4 HK (kljuke) Razdalja med objemkami: pribl. 3.300 mm maks. obremenitev na par prečnih palic: 4.500 kg pri enakomerno porazdeljeni obremenitvi Knsdpszlhr Ajfx Abyoa 02x Varnostni zatiči, rabljeni Izvedba: popolnoma pocinkana Za varovanje vzdolžnih nosilcev pred nenamernim dvigom Vaše kontaktne osebe v našem podjetju: Gospod: Andre Evering Gospod: Mario Klöver Gospod: Falk Deutsch Splošne informacije o izdelku: Ta izdelek je na voljo samo za osebni prevzem. Morebitni dodatni stroški za dostavo ali pošiljanje tega izdelka bodo zaračunani posebej, pri čemer lahko povprašate o njih glede na kraj dostave oziroma obseg dostave.

Stanje: zelo dobro (rabljeno), Stroj za presejanje in sortiranje sipkih materialov ali drobnih kovinskih elementov. Zelo dobro ohranjen – popoln, z originalnim pogonom, krmilno omaro in kompletom kalibracijskih sit. • Proizvajalec: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Leto izdelave: 1972 • Pogon: motor Bauknecht 0,55 kW, 380/220 V, 2850 vrt/min • Krmilna omara: Carl Kurt Walther GmbH, Wuppertal • Jeklena konstrukcija, stabilen okvir s transportnimi kolesci • Trifazno napajanje 400 V • Komplet presejalnih sit v lesenih okvirjih (številke 1–6) • Velikost mrež sit: od 2 mm do 15 mm • Možnost prilagoditve in zamenjave sit • Glavno stikalo, upravljanje start/stop in zaščita pred preobremenitvijo • Zelo dobro stanje – po demontaži iz obrata, mehansko brezhiben Stroj je pripravljen za delo po osnovnem pregledu. Idealno za: kovinske obrate, livarne, industrijske laboratorije, sortiranje granulata, peska ali drobnih delov. Kjdsxmt Eqopfx Abyona

Stanje: dober (rabljeno), Vsebina paketa vključuje: 1x globoki okvir, rabljen Barva materiala: pocinkano jeklo (Sendzimir) Skupna dolžina: približno 1.250 mm za globino police: 1.200 mm razdalja med oporniki: približno 1.100 mm podpora za prečke: približno 50 mm kot podpore: L: približno 80 x 80 mm skupna širina: približno 860 mm notranja širina: približno 855 mm debelina materiala: približno 3 mm Bočni okvir: dolžina: približno 1.245 - 1.070 mm spredaj se poševno zožuje širina: približno 200 mm višina: približno 195 mm Končni omejevalnik: širina: približno 200 mm višina: približno 195 mm Vaše kontaktne osebe v našem podjetju: gospod: Andre Evering gospod: Mario Klöver gospod: Falk Deutsch Splošne informacije o izdelku: Izdelek je rabljen, zato so lahko prisotne praske, udrtine in znaki uporabe. Ta izdelek je na voljo samo za osebni prevzem. Dodatni stroški transporta ali pošiljanja tega izdelka bodo zaračunani ločeno. Cene se razlikujejo glede na kraj dostave ali vsebino paketa, zato nas kontaktirajte za podrobne informacije. Knedpfxsr Dr Suo Abyoa

Stanje: zelo dobro (rabljeno), RNA vibratory feeder with 900 mm diameter, bowl feeder / ct1339a In good condition, for sale with ESR3000 controller. Manufacturer: RNA Model: SRC-N 630-1 L Vibration frequency: 50 Hz / 3000 rpm Voltage: 220 V Power: 5.4 Diameter: 900 mm A = Discharge height: 167 mm Ksdpeh Iy Ttjfx Abysna B = Track width: 50 mm D = Bowl diameter: 980 mm H = Bowl height: 250 mm S = Track pitch: 81 mm

Stanje: zelo dobro (rabljeno), Face plate Diameter: 500 mm Weight: 68 kg Bolt circle spacing: 134 mm Kedpfxjfm Tqro Abyjna Pilot diameter: 96 mm

Stanje: zelo dobro (rabljeno), Professional BERNARDO BS-1 dividing table / indexing head equipped with a high-quality BISON Ø160 mm lathe chuck. The set is intended for milling machines and precise mechanical machining requiring angular division and indexing of workpieces. Technical data: • Indexing head manufacturer: Bernardo • Model: BS-1 • Lathe chuck: BISON 3-jaw • Chuck diameter: 160 mm • Maximum chuck rotational speed: 3000 rpm • Precise angular scale • Indexing plate with hand crank • Robust cast iron construction • Capable of highly accurate angular divisions Applications: • Polygonal milling • Gear cutting • Machining shafts and rotary components • Drilling holes at a specified angle • Toolroom and production operations Knodpfoza Hidjx Abyea Condition: • Used item • Fully complete • Normal signs of use visible in the photos • BISON chuck runs smoothly and clamps workpieces securely • Scales and indexing mechanism are legible and fully functional Set includes: • BERNARDO BS-1 dividing head • BISON Ø160 mm lathe chuck • Indexing crank The exact item shown in the photos is being offered for sale.

Stanje: dober (rabljeno), Upper support Slide width: 145 mm Height: 72 mm Bolt circle: 180 mm Centering pin diameter: 70 mm Support surface: 240 x 220 mm Weight: 23 kg Transport dimensions: Length: 490 mm Kededq Nviepfx Abyena Width: 220 mm Height: 270 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Four-jaw chuck 27974 Diameter: 250 mm 4 individually adjustable jaws Mounting: long taper, diameter 80 mm with external thread 125 x 3 mm Keyway: 10 mm with flange and jaws: 193 mm Knedpfsfimg Hjx Abyea Weight: 29 kg Age estimated

Stanje: zelo dobro (rabljeno), Faceplate Diameter: 450 mm Height: 110 mm Jaw height: 55 mm Long taper mounting: - Large diameter: 100.5 mm - Small diameter: 85 mm - Taper length: 73 mm External thread for locknut: Thread 130 x 4 Keyway: 16 mm Kjdjfhvkvepfx Abyena

Stanje: dober (rabljeno), skupna dolžina: 1.000 mm, skupna širina: 600 mm, skupna višina: 2.500 mm, nosilnost na odsek shranjevanja: 150 kg, TEHNIČNI PODATKI • Proizvajalec: META • Višina okvirja: 2.500 mm • Širina podstavka: 1.000 mm • Globina okvirja: 600 mm • Nosilnost enega podstavka: 150 kg • Število podstavkov na modul: 6 kosov • Površina: pocinkana • Montaža s vstavljanjem • Stanje: rabljeno Velike količine so na voljo takoj. Cene glede na količino, neto cena na kos, brez DDV: Osnovni modul: 1 – 5 modulov: 54,00 € 6 – 20 modulov: 52,38 € 21 – 50 modulov: 50,76 € 51 modulov in več: 49,14 € Dodatni moduli: 1 – 10 modulov: 39,00 € 11 – 25 modulov: 37,83 € 26 – 75 modulov: 36,73 € 76 modulov in več: 35,69 € Dobava iz skladišča Nordhorn. VAŠI KONTAKTNI PARTNERJI PRI NAS: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT IN MONTAŽA Z veseljem vam pomagamo pri transportu in montaži izdelka. Izdelek je na voljo za osebni prevzem. Dostava je možna proti doplačilu. Dodatni stroški so odvisni od kraja dostave in obsega pošiljke, podrobnosti pa lahko povprašate pri nas. Kjdpfx Abjuk E Thsyena PLAČILNI POGOJI Plačilni pogoji se določijo ob naročilu. Cena je navedena kot cena na kos/neto cena, kot je navedeno v opisu izdelka (brez DDV). Seveda boste prejeli račun z navedeno ceno DDV. O NAS Podjetje DLK v Nordhornu se ukvarja s prodajo novih in rabljenih izdelkov iz področja skladiščne logistike, transportnih sistemov, skladiščnih regalov, skladišč za tekstil ter strojev za trgovino, industrijo in obrt. Nenehno vam ponujamo zanimive ponudbe za rabljene izdelke različnih proizvajalcev/blagovnih znamk po ugodnih pogojih. Če imate kakršna koli vprašanja, nas kontaktirajte. Štiri zmage – gradniki uspeha podjetja DLK – skladiščna tehnika | Levelmaker® | logistika | rešitve

Stanje: rabljeno, skupna dolžina: 1.220 mm, skupna širina: 400 mm, skupna višina: 2.000 mm, nosilnost na odsek shranjevanja: 150 kg, Ponujamo rabljene industrijske regalne sisteme. TEHNIČNI PODATKI Proizvajalec: Nedocn Tip: Shelf N Višina okvirja: 2.000 mm (nova roba) Polica: 1.220 x 400 mm (rablena roba) Nosilnost police: 150 kg Število nivojev: 5 kosov Sistem vtične montaže Diagonalni nosilec Cenik (neto cena za kos, brez DDV): Osnovni moduli: 1 – 5 modulov: 41,50 € neto za kos 6 – 20 modulov: 39,43 € neto za kos 21 – 50 modulov: 37,35 € neto za kos od 51 modulov naprej: 35,28 € neto za kos Dodatni moduli: 1 – 5 modulov: 29,50 € neto za kos 6 – 20 modulov: 28,03 € neto za kos 21 – 50 modulov: 26,55 € neto za kos Kedpey Dgglefx Abyjna od 51 modulov naprej: 25,08 € neto za kos NAČRTOVANJE Naša prodajna ekipa vam z veseljem pripravi brezplačno ponudbo, prilagojeno vašim željam. PREVOZ IN MONTAŽA Z veseljem vam pomagamo pri prevozu in montaži izdelka. PLAČILNI POGOJI Plačilni pogoji se dogovorijo v primeru oddaje naročila. Cena je izražena kot cena za kos/neto cena oziroma kot je navedeno v opisu izdelka (brez DDV). Seveda boste prejeli račun z navedeno ceno DDV. O NAS Podjetje DLK iz Nordhorna trguje z novimi in rabljenimi izdelki na področju skladiščne logistike, transportne tehnike, skladiščnih podestov, skladiščenja tekstila ter stroji za trgovino, industrijo in obrt. Nenehno vam ponujamo zanimive ponudbe rabljenih izdelkov različnih proizvajalcev/blagovnih znamk po ugodnih pogojih. Če imate vprašanja, nas kontaktirajte. Štirje dobijo – Gradniki uspeha podjetja DLK – skladiščna tehnika | Levelmaker® | logistika | rešitve

Stanje: zelo dobro (rabljeno), Profesionalni zunanji mikrometer, namenjen za natančne meritve premerov, debelin in dimenzij mehanskih delov. Set vključuje zamenljive merilne nastavke in nastavitvene vzorce, ki omogočajo delo v širokem merilnem območju. Tehnični podatki: • Proizvajalec: HOLEX • Merilno območje: 100–200 mm • Natančnost odčitavanja: 0,01 mm • Zamenljive merilne nastavke • Kalibracijski vzorci vključeni • Lesena transportna škatla Stanje: Rabljeno, v zelo dobrem vizualnem stanju. Komplet je popoln, kot kažejo slike. Mehanizem deluje gladko. Običajni znaki uporabe zaradi skladiščenja in delovanja. Komplet vsebuje: • mikrometer 100–200 mm, Knsdjzaf Ulepfx Abysa • zamenljive merilne nastavke, • nastavitvene vzorce, • nastavitveni ključ, • leseno etui.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: Kjdpfomhhypsx Abysna - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized Knjdpfx Asmhh Dhobysa - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. Knjdpfx Abjmhh Dzeyoa The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. Knodpfx Asmhhx Isbyea When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) Knsdpjmhhyasfx Abyja - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany Kjdjmhh Anjpfx Abysna - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg Ksdpfxeh Ek Dae Abyena - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) Knedpfx Ajmhhf Sobyea - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Ksdemhhl Hspfx Abysna Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Knedpfx Ajmidyfebyea Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing Knsdpemkixwefx Abyea - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) Ksdpfx Abomhh Dtoyjna - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: pripravljen za uporabo (rabljen), Gebruikte blikproductielijn voor de productie van blikken van 73 mm of 99 mm. Verschillende samenstellingen van machines beschikbaar. Bestaat uit: Kodpfjvy Tyxjx Abysna - Krupp Sdvt duplexslitter - Soudronic FBB400 lasmachine - Soudronic poedercoatsysteem voor de binnenzijde - Buitenlakinstallatie - Frei uithardingsoven - Metalbox 65d spin-flanger - FMI A304 kraalwals - FMC 652 sluitmachine