Beck Maschinenbau Gmbh Logdos A8 nakup rabljenega (69.083)

Stanje: novo, Leto izdelave: 2025, THE MOBILE BENDING MACHINE WITH HIGH PERFORMANCE: The compact, mobile design allows for precise and repeatable bending, both stationary and directly on-site, for pipe diameters up to 35 mm, CU 42 mm. Bwodpfx Asnfvx Negtjl A powerful three-phase motor and precision gearbox ensure strong drive power. The motor speed is automatically adjusted, allowing the return movement to take place at a higher speed and reducing cycle times. A position sensor directly on the bending axis guarantees optimal bending accuracy and very high repeatability. The bending angle can be set to 0.5° easily and quickly using push buttons. The large LCD display shows the angles clearly. Storage of up to three bending angles enables efficient bending of pipes with different bending results. For transport, the compact unit and accessories can be stored cleanly and securely in robust transport cases. The “stationary pipe and rotating tool” design principle ensures minimal space requirements when bending. For thin-walled pipes, sliding shoes are used to allow wrinkle-free bending and to form bends with minimal deformations, e.g., in stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent easily. POSSIBLE APPLICATIONS: • Hydraulic piping • Prototype construction • Sanitary and heating installations • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for quick tool changes • Safety footswitch with emergency stop function • 230 V AC connection • Weight: 29 kg • Frequency inverter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • Profile bender PB20 – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod stand • Machine case • Tool case • Small bending device KBV • Special tools upon request OUR SERVICE: • Welcome to test production at our premises in the demo room • Consultation and information session at your site • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your location

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending of pipes up to an external diameter of 100 mm, both stationary and directly at the installation site. Transport is easy using a pallet truck or the optional rollers. A robust three-phase motor and a precision gearbox provide high-performance drive power. The machine impresses with its compact and slim design and a very open bending area. Precise position sensing directly on the bending axis ensures optimal bending accuracy. The bending angle is quickly and easily set via a convenient, menu-guided user interface in 14 languages with touchscreen control, guaranteeing highly intuitive operation. For complex bending tasks, up to 100 bending programs can be stored, each featuring a sequence of up to 8 bends per geometry. Thanks to the multifunctional control system, both forward and return bending speeds can be variably set, and an adjustable overbend function compensates for the material’s springback. With the help of four material characteristic curves, the machine automatically overbends the material to the required angle, delivering precise results. The “stationary tube, rotating tool” principle minimizes the required workspace. For thin-walled tubes, sliding shoes are used to ensure wrinkle-free bends and to achieve minimal deformation—ideal for stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent without issue. Using the small-radius bending device (KBV), extremely small bending radii are possible. POTENTIAL APPLICATIONS: • Plant construction • Hydraulic piping • Serpentine bending • Prototyping • Sanitary and heating installation • Shipbuilding TECHNICAL DATA 10000: Bwsdpfx Aondk N Aogtsl Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase 400 V • Bending radius up to 500 mm • Multifunctional machine control with bending angle adjustment (0.1°) • Maximum bending angle 240° • Safety foot switch with emergency stop • Weight: 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 series, with bending radius from 45 mm, incl. 40 mm hex shaft • Profile bender PB20 – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • Small-radius bending device KBV • Special tools according to customer specifications • Software customization for special tasks OUR SERVICES: • Welcome to carry out test production in our in-house demo room • Consultation and information meeting at your site • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your site

Stanje: novo, Leto izdelave: 2025, THE PRACTICAL HAND TUBE BENDER: The compact, mobile design allows for precise and consistently repeatable bending operations in a bench vice. Operation is performed via a screw-in handle. A lockable setting ring ensures consistent, repeatable bending angles. The easily exchangeable plug-in tool system makes tool changes straightforward. The 'stationary tube and rotating tool' principle enables bending with minimal space requirements. For thin-walled tubes, slide shoes are used for crease-free bending, enabling the production of bends with minimal deformation from materials such as stainless steel and copper tubes. The optional hexagonal drive version allows, in addition to vice operation, the use of the drive force from the 3000 and 6000 bending systems. The KBV can simply be mounted onto the machine’s bending shaft for this purpose. POSSIBLE APPLICATIONS: • Hydraulic piping installation • Prototype fabrication • Plumbing and heating installation TECHNICAL DATA: • Bending capacity: Ø 6 to 18 mm • Manual bend angle limitation • Maximum bending angle: 180º OPTIONAL ACCESSORIES: • KBV with hexagonal drive for bending on models 3000 or 6000 Bwedpfxsng Amkj Agtsl • Machine case • Length stop OUR LOCAL SERVICE FOR YOU: • Welcome to test production at our on-site demonstration room • Consultation and information meeting at your facility • Consultation and processing of lease/financing purchase through JUTEC • Trade in of your current machine • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2025, THE PRECISE 3-ROLL BENDING MACHINE Bwsdpfjng A R Sox Agtol The development of this compact and mobile horizontal bending machine was clearly focused on the production of dimensionally accurate spirals, such as handrails for spiral staircases. This represents the highest level of complexity, as two interdependent variables (radius and pitch) must come together in a single bend to create a precise geometry. The interaction between pipe calculation on a PC, implementation on the bending machine, and monitoring with measuring devices, including final corrections of bending parameters, ensures accurate bending. With just a few simple entries in the PC pipe calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for machine operation. A new, powerful drive concept enables stepless adjustment of the bending speed, requiring only a 230 V (single-phase) power connection. Both hardened steel tools and surface-friendly, hard plastic tools are available. To ensure optimal feed, even for tight bending radii, all three bending rollers are driven. The drive concept proves its worth in daily heavy-duty use, whether working on flat surfaces or bending pipes and profiles. Customers of the 4800, 5000, and 6000 bending systems have the option of purchasing the roll bending unit without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 systems via the bending shaft. In this configuration, the machines serve as the drive unit. POSSIBLE APPLICATIONS: • Handrails/underrails for spiral staircases • Large pipe and profile bends • General metal construction TECHNICAL DATA: • Bending capacity: Ø 10 to 60 mm • Minimum bending radius: 300 mm at Ø 42.4 mm • Bending direction: right and left • Digital adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • Site-ready 230 V connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller – for stabilization • Lifting roller – to produce controlled pitch • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch based on twist • MPW – PC calculation program for determining the correct bending values • RB4303 – Universal bending tool for profiles up to 60 mm in height • Tools for special profiles OUR SERVICE FOR YOU ONSITE: • Welcome to test production at our facility in the demo room • Consulting and information session at your location • Consultation and processing of leasing/financing purchases • Service contracts, onsite maintenance

Stanje: novo, Leto izdelave: 2025, THE COST-EFFECTIVE MANDREL BENDING MACHINE FOR TIGHT BENDING RADII This bending system offers solutions for complex geometries with standard radii of 2xD for tube dimensions from 20 - 90 mm. Depending on the material quality and wall thickness ratio, radii of 1.5xD are also feasible for series production. With a tool height of 120 mm, there are also ample possibilities for special profiles. The highly precise and powerful electric drive of the bending axis, as well as the stable and robust construction of the mandrel carrier and bending arm, contribute to the desired bending results. Quick-change bending tools allow rapid conversion to different tube dimensions. The clamping pressure for tube securing is optimally adjustable. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store virtually unlimited programs for bend angles, lengths, and rotation angles for up to 50 bend sequences per tube. For monitoring spring-back values, a freely programmable database is available for up to 200 materials. The control offers two operation modes: In "Simple Bending", tube segment lengths and rotation are automatically displayed in relation to each other. In "Controlled Bending" mode, data is entered beforehand and a continuous target/actual comparison is performed during bending. Also available with pneumatic rotation stop or with gearbox-assisted positioning for length and rotation. POTENTIAL APPLICATIONS: • Plant construction, e.g., chemical industry • Hydraulic piping • Metalworking • Prototype construction • Piping installation TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm (depending on material) • Bending radius min/max: 40 mm / 250 mm • Minimum bending radii: 1.5 x Ø (Standard: 2 x Ø) • Multifunction machine control for angle adjustment (0.1°) • Mandrel bar lengths: 3000 / 4500 / 6000 mm • Maximum 180º bending result • Weight: 1600-3200 kg (depending on version) • Ergonomic operation via safety foot pedal OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Larger bending radius up to 300 mm • Positioning of length and rotation via automatic brake function or manual stops using foot pedal • Semi-automatic length and rotation positioning using servomotors • Automatic tool retraction • Tube calculation software • 10-inch touchscreen with integrated tube calculation • Data transfer via cable (LAN), wireless (WLAN), or USB Bjdonh R Sujpfx Agtowl OUR SERVICE: • Welcome to perform test production at our in-house demo room • Consultation and information meetings at your site • Leasing/financing advice and processing via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine with manual eccentric quick-release clamping for tube fixation enables efficient bending operations. The compact drive unit with detachable mandrel support offers advantages during on-site installation. Direct position detection on the bending axis ensures optimum bending precision. The bending angle can be set quickly and easily via a convenient touchscreen controller with a user-friendly, menu-driven interface. The advanced control system allows for two speed settings as well as a configurable overbending feature for compensating material springback. The bending process is significantly shortened by the automatic “return” movement at the end of the bend. For more complex bending tasks, bending programs can be stored, offering up to 50 bend angles per geometry. An almost unlimited number of programs and up to 200 materials can be saved to the controller or a USB stick. Plug-in bending tools allow for fast changeover to different tube sizes. For challenging geometries, the machine can be converted as standard to either right-hand or left-hand bending directions. The open bending unit also allows for bends such as railing frames with only a single weld seam. Optional PC calculation software determines the cut length for the entire geometry as well as the feed path, twist, and bending angle for every individual bend. The mandrel retraction is programmable and can be automatically triggered once the predefined bending angle is reached. POSSIBLE APPLICATIONS: • Plant construction, e.g. chemical industry • Hydraulic piping • Prototyping • Pipeline construction TECHNICAL DATA: Bsdponfvy Uefx Agtewl • Bending capacity: Ø 6 to 50 mm • Minimum/maximum bending radius: 10 mm / 140 mm • Bending radii: 2 x D • Multifunction machine control for bending angle adjustment (0.1° accuracy) • Mandrel support lengths: 1500/3000/4500/6000 mm (special versions are available with longer lengths) • Maximum bending result: 180º • Weight: 300-500 kg (depending on configuration) Optional accessories: • Automatic mandrel lubrication (minimal quantity) • Digital measuring system for length and twisting (resolution 0.1) • Remote control of all functions at the carriage (rotational and length stop) • Bending radius up to 250 mm • PC tube calculation software OUR SERVICES: • Welcome to trial production in our in-house demo room • Consulting and informational meeting at your premises • Consultation and processing of leasing/financing purchase through JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm, both stationary and directly at the installation site. A powerful three-phase motor and a precision gearbox ensure a robust drive. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle can be set quickly and easily via a user-friendly, menu-driven touchscreen interface that ensures even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, each with an angle sequence of up to 8 bends per geometry. The multifunction control allows for variable adjustment of the bending speed for forward and reverse operation, and features a parametrizable overbending function to compensate for material spring-back. By using four material characteristic curves, the material is automatically overbent to the required bending angle, ensuring an accurate bending result. The "stationary pipe, rotating tool" principle ensures a minimal footprint during bending. For thin-walled pipes, sliding shoes are used to achieve wrinkle-free bends and to bend curves with minimal deformation from materials such as stainless steel and copper tubing. With the PB20 profile bending attachment, flat, square and round bars can be bent effortlessly. The KBV small radius attachment enables extremely small bending radii. Bodpfjng Ax Sox Agtswl POSSIBLE APPLICATIONS: • Plant construction • Hydraulic tubing • Meander bending • Prototype construction • Sanitary and heating installation TECHNICAL DATA: Bending capacity 6000SB: Ø 6 to 50 x 4 mm, single-phase 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm, three-phase 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm, three-phase 400 V • Minimum/maximum bending radius: 36 mm/280 mm • Optional large bending radii up to 500 mm • Multifunction machine controller, bending angle setting (0.1° precision) • Maximum bending angle 240° • 40 mm hexagonal shaft for quick tool change • Safety foot switch with emergency stop • Weight 110 kg OPTIONAL ACCESSORIES: • PB20 profile bender – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • RB43 roller bender – The RB43 is mounted on the hexagonal shaft of the bending axis. By switching to continuous bending, the bending system functions as a drive unit. • KBV small radius attachment • Special tools according to specification OUR LOCAL SERVICE FOR YOU: • Welcome to conduct test production in our in-house demo room • On-site consultation meeting • Advice and processing for leasing/financing purchases • Trade-in of your current machine • Service contracts, maintenance at your site

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna višina: 4.500 mm, skupna širina: 7.500 mm, skupna dolžina: 1.000 mm, Article Description Industrial 4-in-1 Fiber Laser Welding Machine – Model LMH1500 Top performance at a fair price! Our new LMH1500 model with a 1500 W Raycus CE-certified laser source offers four integrated functions for professional metal processing: ✅ Overview of Functions: Laser Welding – precise, deep, and virtually distortion-free Laser Cutting – ideal for thin sheets up to approx. 4 mm Laser Cleaning – effective against rust, paint, and oxidation Weld Seam Cleaning – clean seams directly after welding 📌 Technical Specifications: Laser Power: 1500W Raycus (CE-certified) Wavelength: 1080 nm Optical Fiber: 10 meters Cooling: Integrated water cooling Operating Modes: Welding, Cleaning, Cutting, Pulse Voltage: 3×400V / 50–60 Hz Welding Speed: up to 120 mm/s Dimensions (L×W×H): approx. 1000×760×450 mm Weight: approx. 170 kg 📦 Scope of Delivery: 1× LMH1500 Laser Welding Machine 1× Handheld welding torch incl. nozzles 1× Automatic wire feeder 1× Laser safety glasses 1× User manual (German) 1× CE Declaration of Conformity Bedew Tfbropfx Agtowl 1× Risk assessment according to Machinery Directive 💼 Fields of Application: For stainless steel, galvanized sheets, aluminum, copper, brass, and more. Ideal for workshops, mechanical engineering, metal construction, bodywork, or maintenance. 🔒 Certified & Safe: CE certificate incl. risk assessment according to EU directives. Delivery includes all necessary documentation. 📍 Manufacturer / Distributor: TEC-POINT GmbH Kupferstraße 10, 33378 Rheda-Wiedenbrück 🚚 Shipping & Invoice: By freight forwarding (pallet shipping) within Germany & EU – shipping costs on request. 🧾 Invoice with shown VAT will be issued. ✅ Buy now and have it delivered ready for immediate use!

Leto izdelave: 2025, stanje: novo, Silicone membrane sheet for membrane presses, silicone membrane for membrane presses, natural rubber membrane MEMBRANES for membrane presses – silicone or natural rubber Highest quality, suitable for all membrane presses (for foil and veneer pressing). Our membranes are available pre-cut to your required dimensions or as roll stock. For 3D furniture front production, we also offer solutions for presses, foil cutting machines, foil carousel systems, and cleaning machines! MEMBRANES for membrane presses – made from silicone or natural rubber Highest quality, suitable for all membrane presses (for foil and veneer pressing). Our membranes are available pre-cut to your required dimensions or as roll stock. SILICONE Type: SM-1 3mm Color: translucent milky Bwsdpfx Ageff Agietsl Surface: smooth / smooth Standard widths: 1700 and 1800 mm Polymer base: silicone Hardness: 50° Shore Thickness: 3mm Operating temperature: min. -50°C / max. 230°C SILICONE Type: SM-1 2mm Color: translucent milky Surface: smooth / smooth Standard width: 1700 mm Polymer base: silicone Shore hardness: 50° +/- 3° Shore Thickness: 2mm Operating temperature: min. -60°C / max. +230°C NATURAL RUBBER Type: RM-2 Color: grey Surface: smooth / smooth Standard widths: 1700 and 2000 mm Rubber: natural rubber Hardness: approx. 42° Shore Thickness: 1.8mm, 2.5mm, and 4mm Operating temperature: min. -20°C / max. +130°C For 3D furniture front production, we also offer solutions for presses, foil cutting machines, foil carousel systems, and cleaning machines!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, širina tovornega prostora: 2.500 mm, dolžina tovornega prostora: 6.000 mm, višina nakladalnega prostora: 2.550 mm, Oprema: osvetlitev, Container in the picture in stock and available immediately. Inspection and collection possible. We are offering Villex X-Series Black containers, which can be used as office containers, sanitary containers, school containers, kindergarten containers, refugee containers, living containers, or site containers. Dimensions: 6 x 2.5 x 2.55 m Delivery: available nationwide Standard features: Condition: New & assembled Exterior color: Anthracite + Black (as shown in the photos) Bsdpfx Asy Eymzegtjwl Exterior wall thickness: 75 mm Area: 15 m² Weight: 1,500 kg 1x double-leaf glass door --> aluminum, RAL9005, double-glazed 3x windows --> aluminum, RAL9005, double-glazed Electrical fittings: 4x sockets, FL switch + fuse Delivery usually takes place with our own vehicles. Payment is possible in cash on delivery to our driver or conveniently in advance via PayPal or bank transfer. Delivery time for in-stock standard containers nationwide is approx. 1–2 weeks after order, depending on postal code area. Custom-made containers are manufactured and delivered within 1–4 weeks.

Stanje: novo, Leto izdelave: 2025, skupna masa: 9.700 kg, prenosno razmerje: 42.642, Glavni menjalnik FLENDER, H3SH velikost 19 i = 42,642 Premer izhodne gredi: 290 mm Premer pogonske gredi: 110 mm Hlajenje z: mineralno olje CLP VG 460 P2 = 420 kW n1 = 1 231 1/min n2 = 28,9 1/min T2 = 138 942 Nm Vključuje: - Sistem dovoda olja OWGD - Cevi Bodpfxeyuddne Agtowl - Glavna pogonska sklopka RUPEX RWN 360 - Izhodna sklopka RUPEX RWN 1250 - Pomožni menjalnik B3 SH 04 - Pomožni motor INNOMOTICS 1CV3182B 180 - Zavora TE 200/220/50 - Pogonska spojka FLUDEX FADB 297x200 - Izhodna spojka N-EUPEX A315 - Temeljni okvir za pomožni pogon

Stanje: dober (rabljeno), Leto izdelave: 1998, Podajalnik palic Breuning IRCO ILS RBK 7212 Tehnični podatki: Tip: ILS RBK 7212 Leto izdelave: 1998 Priključek: 400 V Moč: 1 kW Premer materiala: ca. Ø 12–72 mm Dolžina palic: do ca. 720 mm (podajalnik kratkih palic) avtomatski podajalnik Bwjdpfx Aey Ez Exsgtjl izmet ostankov prisoten upravljalna plošča s krmiljenjem Dodatna oprema: obsežen komplet vodilnih kanalov (različni premeri) dodatne potisne palice dokumentacija priložena diverse rezervne dele (glej slike)

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036679, vpenjalna sila: 1.600 kN, premer vijaka: 40 mm, delovna prostornina: 393 cm³, tlak vbrizgavanja: 1,892 letvica, injekcijska masa: 358 g, minimalna višina orodja: 200 mm, izmetalna sila: 33.000 N, hod izmetalca: 100 mm, odmični hod: 950 mm, vgradna višina: 500 mm, skupna dolžina: 5.650 mm, skupna širina: 1.820 mm, skupna višina: 1.950 mm, skupna masa: 9.700 kg, ogrevalna zmogljivost: 15,5 kW (21,07 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 570 mm, teža orodja: 600.000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The entry-level injection moulding machine, precisionMolding, is the perfect solution for fully electric injection moulding, enabling you to respond quickly and innovatively to changing market demands. It combines high performance, easy operation, and short delivery times. The machine is suitable for a wide range of applications, such as the packaging industry, electronics and electrical industry, medical technology, and the automotive sector. Your benefits: – Optimized price-performance ratio for a broad range of applications – High energy efficiency thanks to a fully electric machine concept – Reliable and efficient delivery times due to a base machine concept with a wide spectrum of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine No.: 61036683, new, year 2013) CONTROL SYSTEM - MC P1 with 15" TFT colour display with multi-touch functions CLAMPING UNIT - Clamping force: 1600 kN - Maximum mould opening force: 120 kN - Daylight (H x V): 570 x 520 mm - Mounting platen (H x V): 770 x 720 mm - Mould installation height min. – max.: 200 – 500 mm - Maximum opening width: 950 mm - Maximum mould opening stroke: 450 mm - Ejector drive: electric - Ejector stroke: 100 mm - Ejector force, forward/reverse: 33 / 33 kN - Ejector speed, forward/reverse: 300 / 300 mm/s - Maximum mould weight: 1200 kg INJECTION UNIT - Screw diameter / type: 50 mm / standard - Effective L/D ratio: 20.2 - Injection pressure: 1,892 bar - Stroke volume: 393 cm³ - Shot weight at max. stroke for PS: 358 g - Injection speed: 200 mm/s - Injection flow rate: 393 cm³/s - Screw drive / rotation speed: 267 rpm - Plasticizing throughput (standard screw): 36.5 g/s Bedpfxjyzz Ire Agtowl - Nozzle contact force: 42 kN ELECTRICAL PARAMETERS - Connected load: 31.2 kW - Installed heating capacity: 15.5 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral WEIGHT AND DIMENSIONS - Net weight (incl. control cabinet): 9.7 t - Length x width x height: 5.65 x 1.82 x 1.95 m ADDITIONAL FEATURES - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - Air valve, single (BWAP) - Pneumatic control for hot runner shut-off, single - Electrical interface for pneumatic cascade, 4-fold - Euromap interface for handling: E18 + E67 - Euromap interface (central computer): E67, E77 - Water manifold, 4-fold - Electrical pre-installation for hydraulic auxiliary unit - Automatic central lubrication - Adaptive Process Control (APC) - Injection compression moulding circuit - Graphic analysis package - Swivel device for injection unit The machine is located at our facility in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your enquiry.

Stanje: rabljeno, Leto izdelave: 1992, Funkcionalnost: omejena funkcionalnost, Lakirna kabina po slikah naprodaj, vključno s žeravno progo, kot je razvidno s slik. Ob samostojni demontaži je cena predmet dogovora. Bodsy Aldaspfx Agtewl

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna masa: 150 kg, nosilnost: 12 kg, doseg roke: 1.425 mm, vrtilni razpon: 354 °, proizvajalec krmilnikov: fruitcore robotics GmbH, širina krmilne omare: 174 mm, višina krmilne omare: 313 mm, vhodna napetost: 230 V, vhodni tok: 6 A, vrsta vhodnega toka: Klimatska naprava, natančnost ponavljanja: 0,1 mm, Oprema: dokumentacija / priročnik, Industrial robot HORST1400 Optimal performance with cost-effective investment The robot system includes: - Industrial robot HORST1400 - Control unit & accessories - Operator panel (VE500663) or Panel G2 (VE500681) - WLAN stick for use of Digital Services - Central control software horstOS including Basic Features - Access to the IIoT platform horstCOSMOS - 6-year warranty on the robot drive train Performance data: - Reach: 1425 mm - Payload: 12 kg - Repeatability: +/-0.10 mm - Weight: approx. 150 kg - Ambient temperature: 5-40°C - Protection class: IP54 For further details, please consult the attached technical data sheet. Documentation / Operating manual Our products are designed in accordance with Machinery Directive 2006/42/EC. A printed operating manual in German, including a declaration of incorporation, is also included in the delivery. The following three software features are not included in the scope of delivery but can be booked additionally: Additional Feature: Advanced Automation Features Scope of functions: - Component Management Library – access to all component templates from fruitcore robotics - Parallel Processes – simultaneous execution of multiple sequences within one robot program - Start-up Routine – automatic execution of predefined sequences when starting the robot system - Email Notifications – sending emails for defined events (e.g. in case of errors) - Process Control – individual customization of the Process Control screen Additional Feature: Advanced Graphical Features for the fastest and simplest robot programming Scope of functions: - Graphical programming of palletizing applications - Graphical robot programming with complex paths - Setting up work area limits - User-defined coordinate systems Bwodpjy D Ryiefx Agtsl AI Features Scope of functions: - AI Support - AI Programming - AI Error Handling

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, volumenski pretok: 90 m³/h, skupna širina: 2.950 mm, skupna dolžina: 3.800 mm, skupna višina: 2.300 mm, poraba energije: 1 kWh, Innovative band filter technology for maximum process reliability Bwjdpfx Ajy Evxyogtel The RESY KBF compact band filter system represents a pioneering advancement in the field of automatic band filter units. Key advantage: There is no relative movement between carrying belt, filter fleece, disc wheels, and sludge scrapers. This ensures that the filter fleece is not damaged, even when processing large quantities of chips or solid particles. Compared to conventional flat-bed filters, the compact band filter offers: - Up to 80% less space requirement - Higher degree of purity - Consistent filtration performance - Reduced maintenance intervals - Maximum process stability Operating principle of the compact band filter A robust, endless metal-link belt is half-shell-shaped guided over two rotating disc wheels and driven by a geared motor. The filter fleece is positioned between the belt and the wheels. The contaminated medium is fed via a central inlet pipe directly into the completely sealed filtration tank. In the calm zone, solid particles settle and form a filter cake. This filter cake acts as an additional natural filter layer and continuously improves separation efficiency. As contamination increases, the liquid level rises—depending on the design, up to 500 mm. When a predefined maximum value is reached, the system automatically advances fresh filter fleece without interrupting the filtration process. At the same time, the following are reliably discharged: - Used fleece - Sludge - Chips - Coarse particles An integrated sensor continuously monitors the diameter of the fleece roll and signals in time when a roll change is necessary. The entire filtration process is fully automatic and energy-efficient. Custom-tailored configuration for your application Actual filtration performance depends on several process parameters, including: - Throughput volume - Medium (e.g., emulsion, oil, process water) - Inlet concentration - Desired filtration fineness - Particle size and material properties The compact band filter is configured individually according to your technical requirements. Typical applications - Metalworking - Grinding processes - Turning and milling operations - Coolant preparation - Process water treatment - Chip and sludge filtration

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 20.331 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 970 mm, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 750 kg, skupna masa: 33.000 kg, Good day, We hereby offer, subject to prior sale, a used, complete baling line consisting of a baler from the manufacturer HSM, type VK 8818 R-FU including conveying technology and wire tying stations. The following technical data have been taken from the operating manual and manufacturer brochures. We assume no liability for the correctness or completeness of this information. Technical Data Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours, as of September 2025 Number of bales pressed: 29,020 bales, as of September 2025 Main press force: 1,000 kN Specific press force: 120 N/cm² Shear-edge ejector press force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time in idle operation: 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2000 mm Drive capacity: 2 x 45 kW, frequency-controlled Total connected load: 110 kW Total current consumption: 213 A Fuse protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput rates at bulk density of 20 kg/m³: 12.86 t/hour bulk density of 50 kg/m³: 32.15 t/hour Bale weight at a bale length of approx. 1.2 m: 650 to 750 kg per bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC: Siemens S7-300 Operator panel: Siemens TP 700 Dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions with conveyor technology: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight baler: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional special equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW motors at the same output Manual activation/deactivation of wire tying strands to save tying wire with non-expanding materials Shear-edge ejector with 121 kN press force Wire break/end sensor monitoring, with baler shut-off in the event of wire breakage or wire end Bale slide Optical warning signal mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor technology) is in good, immediately operational condition and has been cleaned, lubricated, and maintained weekly by the operator in accordance with the manufacturer’s specifications. Technical Data Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain belt conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Length of feed belt: 7,000 mm Length of ascending belt: 14,500 mm Length of goose neck: 1,550 mm Inclination: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Bsdjyz Af Eopfx Agtjwl Scope of delivery: - HSM VK 8818 R-FU baler - Service platform - Bale slide - Wire deflection stations - Wire spool trolleys (without wire spools) - Stadler KF 1800 chain belt conveyor - Crosswise sliding belt conveyor - Pit cover from the feed conveyor to the pit - Second control cabinet for baler operation at the conveyor - Machine documentation in English Delivery time: The entire plant has already been dismantled and stored, and will be ready for loading shortly after payment is received. We would be pleased if this or one of our other balers is of interest to you. Your service team, Mertens & Frowein GmbH

Leto izdelave: 2025, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Connection: 3.55 kW / 230 V / 50 Hz External dimensions (W x D x H): 945 x 830 x 1025 mm External dimensions (W x D x H, open): 945 x 830 x 1640 mm Weight: 60 kg Basket diameter: 600 mm Usable height: 380 mm Pump pressure: 2.2 bar Spray rate: 4,200 l/h Load capacity: 100 kg Bwedpfoxiwc Sjx Agtjl The contaminated items to be cleaned are placed in the rotating wash basket and the lid is closed. After setting the desired washing temperature and time, the unit is switched on and the wash medium in the tank is heated. Inside the closed machine, the basket rotates at a constant speed around its own axis. The pump assemblies draw the wash medium from the wash tank and feed it through six stainless steel spray pipes equipped with overlapping flat-jet nozzles. During uniform rotation of the basket, which is driven by the nozzle spray, the cleaning items are thoroughly treated from all sides with the hot solution. When the cleaning cycle is complete, the unit switches off automatically. Advantages - 1 pump, horizontally arranged - Flow rate: 70 L/min - 3 three-dimensional stainless steel spray pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (Ø 170 mm) - Rotating wash basket made from stainless steel, water-jet driven - Steam extraction - Stainless steel sieve plate with filter intakes above the wash tank - Water shortage protection

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 100 h, 5 pieces: • Gravimetric screw feeder Bsdpfx Ajt S Rdusgtowl • Feed hopper with pneumatic rotary valve, each with cover • Screw conveyor from Big Bag unloading, each with height-adjustable individual frame 1 piece: • Trough screw conveyor for combining and conveying the dosing materials into a transfer container 5 pieces: • Big Bag discharge station with suspension crossbeam that prevents the Big Bag from collapsing during emptying • Big Bag base plate with discharge aid (vibration drive) Option not included in the price: Control cabinet incl. control system Delivery: EXW

Leto izdelave: 2024, stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Bwjdpfehx Elfjx Agtol Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Control cabinet and operator panel The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.

Stanje: delavnici obnovljeno (rabljeno), Technical data Feeder bunker with hydraulic moving floor and bag opener for recyclables from yellow bags, commercial waste, and residual waste: Manufacturer: BRT HARTNER GmbH Model: HP5-3035 Year of manufacture: 2015 Bunker volume: 30 m³ Drive power: 17.5 kW Dimensions (current state): 13,200 x 3,050 x 4,350 mm (L x W x H) Bedpfx Asyizxregtswl Condition of the machine: The feeder bunker with bag opener was in operation at a large recycling facility, where recyclables from yellow bags or commercial waste were tipped into the bunker using wheel loaders, bags were opened via the bag opener, and materials were discharged dosed either to a sorting plant or for further processing. The system functioned flawlessly until disassembly and was replaced by a larger machine with higher throughput. The machine was dismantled in our workshop into individual components, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and/or the following spare parts were renewed: – Disassembly of the feeder bunker and bag opener into individual parts. Cleaning, partial sandblasting, priming, and painting of steel components. – Various wear and cover plates were newly manufactured and installed. – Cutting off worn ends (approx. 40 cbm) of the moving floor tubes. Welding new tubes and smoothing the moving floor tubes. – Replacement of all sliding plastic plates for the hydraulic moving floor. – Removal of the hydraulic unit from the moving floor, complete drainage of the hydraulic oil tank, replacement of oil filters, refilling with new hydraulic oil. – Replacement of all three hydraulic manifolds, all valves, oil sight glass, and all hydraulic hoses on the hydraulic power unit. – All three hydraulic cylinders of the moving floor: seals and hydraulic hoses replaced. – All six end switches (proximity sensors) of the moving floor were replaced. – Conveyor chains left and right of the scraper conveyor replaced. – Seven scraper bars of the scraper conveyor replaced. – Drive motor for the bag opener rotors replaced. – All nine pneumatic cylinders for the pressure pipes replaced. All pneumatic lines and fittings renewed. – All sliding plastic plates for the hydraulic adjustment of the bag opener renewed. The bag opener can be moved in depth to allow the system to be used for commercial or residual waste without the bag opener if required. – Side impact protection plates on both sides renewed. – Various wear parts of the bag opener replaced. – The entire system was completely rewired and reconnected electrically. – The system control in the control cabinet was reverted by BRT Hartner to standalone single unit operation and the standard program was reloaded. – The system was commissioned and tested by BRT Hartner; see the function video. Notes: Documentation (operating manual, CE declaration, electrical/hydraulic diagrams) is available. Inspection possible by appointment. We accept no liability for the technical specifications or possible errors.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, moč: 9,7 kW (13,19 KM), Technical Data – Cardboard Shredder (2-Shaft Shredder): Bodju Tha Iepfx Agtswl Manufacturer: Presto GmbH & Co. KG Model: PZA Year of Manufacture: 2007 Throughput Volume: 130 m³/hour Speed: 37/9 rpm Motor Power: 7.5 / 2.2 kW Electrical Connection: 32 A Internal Shredder Dimensions: 1,490 x 1,320 x 530 mm (L x W x H) External Shredder Dimensions (without cover): 2,308 x 1,320 x 685 mm (L x W x H) Machine Weight: 0.45 t System Application: The PZA-type cardboard shredder was used in a Dutch logistics center to pre-shred loose, set-up cartons from the returns department, which were then pressed into bales. Cartons were manually placed onto the infeed conveyor and transported directly to the shredder by a sliding belt conveyor for shredding. The pre-shredded cartons were then conveyed over several hundred meters to the baling press for compaction. Scope of Delivery: 1 piece Presto Cardboard Shredder (2-Shaft Shredder), model PZA Notes: The cardboard shredder was an integral part of the disposal line and was well maintained to ensure high availability in the returns department. The machine is in good condition and immediately operational. Price is per unit ex works our warehouse in Siddeburen, Netherlands. Full documentation (operating manual, CE declaration, electrical/hydraulic schematic) is available. Inspection is possible by appointment. We assume no liability for the accuracy of the technical data or for possible errors.

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 3.641 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 36 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.080 mm, širina bale: 1.100 mm, višina bale: 750 mm, moč: 15 kW (20,39 KM), volumenski pretok: 90 m³/h, Technical Data – Baler: Bodpfx Ageu Thh Eotjwl Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Year of Manufacture: 2010 Operating Hours: 3,641 h Main Press Force: 36 t Specific Pressing Force: 467 N/cm² Feed Hopper Dimensions: 1,080 x 1,100 mm (L x W) Cycle Time: 34 seconds Filling Volume per Press Cycle: 0.85 m³ Theoretical Throughput: 90 m³/hour Throughput under Operating Conditions (at material bulk density of 35 kg/m³): approx. 51 m³/hour Bale Dimensions: 1,100 x 750 mm (W x H), length variable Drive Power: 15 kW Binding: 4-fold vertical, semi-automatic, with polyester twine Throughput at Bulk Density of: - 35 kg/m³: 1.8 t/hour - 60 kg/m³: 2.5 t/hour - 100 kg/m³: 3.1 t/hour Transport Dimensions (Baler only): 4,200 x 1,640 x 2,200 mm (L x W x H) Machine Weight (Baler): approx. 4 t Remarks: The baler has been function-tested in our workshop, subsequently stored, and is thus available at short notice. Complete machine documentation (operating manual, CE certificate, electrical and hydraulic schematics) is available. Viewing by appointment is possible. We assume no liability for the technical specifications or possible errors.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, obratovalne ure: 3.000 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 70 t, skupna masa: 9.500 kg, širina odprtine za polnjenje: 420 mm, dolžina polnilne odprtine: 1.250 mm, Technical Data - Baling Press / Can Press / Sheet Metal Press: Manufacturer: unoTech GmbH Model: UPAXX 70 Year of manufacture: 2019 Operating hours: approx. 3,000 hours Pressing force: 700 kN at 315 bar Filling opening (hopper): 420 x 1,250 mm (D x W) Channel cross-section (bale size): 350 x 500 mm (H x W), length depending on material Drive power: 30 kW Connected load: 40 kW Total current consumption: 70 A Throughput rate for empty beverage cans with: • one press stroke: approx. 1.7 t/h • two press strokes: approx. 2.5 t/h Achieved compaction: approx. 1,200 kg/m³ Hydraulic oil tank capacity: 850 L Press dimensions (assembled): 8,000 x 1,600 x 2,500 mm (L x W x H) Transport weight (press): approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press chamber made of wear-resistant steel S355 Material suitability: According to the manufacturer, this machine is suitable for pressing tin cans, sheet metal offcuts, steel sheet, as well as aluminum, brass, and copper scrap. Condition of the baling press: The baling press has been completely overhauled in our workshop. The press is in very good condition (see the function video after overhaul) and is sold with a 12-month OBM parts warranty. Bwsdpfx Asu Th S Sogtel Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematic). Inspection is possible by appointment. No liability is assumed for technical data or possible errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 22.029 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 16.000 kg, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2025, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours as of December 2025 Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Filling chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput (at bulk densities): – 30 kg/m³: approx. 6.0 t/hour – 50 kg/m³: approx. 10.5 t/hour – 100 kg/m³: approx. 17.5 t/hour Bale weights (at approx. 1.2 m bale length, depending on material): up to 600 kg PLC control: Siemens S7-300 Display panel: pulsotronic Machine dimensions (installed): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 16 t Special equipment: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk materials with small particle size • Control cabinet air conditioning • Elevated machine feet, 200 mm Remarks: The machine has been serviced and partially overhauled in our workshop. The following works have been performed and parts renewed: • Removal and disassembly of the press ram, maintenance of the mechanics, replacement of the following plastic wear strips and rails: o Plastic wear strips left/right underneath the press ram o Plastic wear strips left/right above the press ram o Central plastic main wear plate (support plate) under press ram • Steel guide rails (left/right, upper frame) replaced • Complete four-part floor plate replaced with wear-resistant HARDOX steel Bodpfx Agox A U Ncotewl • Wire inlet rails in press floor newly welded and smoothed • Counter blade replaced (two-part, in frame) • Knife gap adjusted to approx. 2.5 mm • Removal and disassembly of the tying and twisting unit, mechanical overhaul, all groove ball bearings and axial ball bearings of twister shafts replaced, wire cutters cleaned and adjusted, chains lubricated and tensioned • Support roller in front of the twister shafts replaced • All hydraulic hoses replaced • Oil and air filters replaced • Main hydraulic cylinder checked for leaks • Hydraulic oil is only one year old, was chemically analyzed and is still in good condition, hence was not replaced, but can continue to be used • General maintenance performed Finally, the baler was tested in manual and automatic mode – see video for machine function test.