Oliver Fritz Gmbh & Co. Kg Sistem Za Peskanje Kabina Za Peskanje nakup rabljenega (128.865)

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. Ksdpfsnh R Ekox Al Nedk TECHNICAL DATA: • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2025, THE MOBILE BENDING MACHINE WITH HIGH PERFORMANCE: The compact, mobile design allows for precise and repeatable bending, both stationary and directly on-site, for pipe diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and precision gearbox ensure strong drive power. The motor speed is automatically adjusted, allowing the return movement to take place at a higher speed and reducing cycle times. A position sensor directly on the bending axis guarantees optimal bending accuracy and very high repeatability. The bending angle can be set to 0.5° easily and quickly using push buttons. The large LCD display shows the angles clearly. Storage of up to three bending angles enables efficient bending of pipes with different bending results. For transport, the compact unit and accessories can be stored cleanly and securely in robust transport cases. The “stationary pipe and rotating tool” design principle ensures minimal space requirements when bending. For thin-walled pipes, sliding shoes are used to allow wrinkle-free bending and to form bends with minimal deformations, e.g., in stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent easily. POSSIBLE APPLICATIONS: • Hydraulic piping • Prototype construction • Sanitary and heating installations • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for quick tool changes • Safety footswitch with emergency stop function • 230 V AC connection • Weight: 29 kg • Frequency inverter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • Profile bender PB20 – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod stand Ksdpenfvx Nefx Al Nsdk • Machine case • Tool case • Small bending device KBV • Special tools upon request OUR SERVICE: • Welcome to test production at our premises in the demo room • Consultation and information session at your site • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your location

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending of pipes up to an external diameter of 100 mm, both stationary and directly at the installation site. Transport is easy using a pallet truck or the optional rollers. A robust three-phase motor and a precision gearbox provide high-performance drive power. The machine impresses with its compact and slim design and a very open bending area. Precise position sensing directly on the bending axis ensures optimal bending accuracy. The bending angle is quickly and easily set via a convenient, menu-guided user interface in 14 languages with touchscreen control, guaranteeing highly intuitive operation. For complex bending tasks, up to 100 bending programs can be stored, each featuring a sequence of up to 8 bends per geometry. Thanks to the multifunctional control system, both forward and return bending speeds can be variably set, and an adjustable overbend function compensates for the material’s springback. With the help of four material characteristic curves, the machine automatically overbends the material to the required angle, delivering precise results. The “stationary tube, rotating tool” principle minimizes the required workspace. For thin-walled tubes, sliding shoes are used to ensure wrinkle-free bends and to achieve minimal deformation—ideal for stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent without issue. Using the small-radius bending device (KBV), extremely small bending radii are possible. POTENTIAL APPLICATIONS: • Plant construction • Hydraulic piping • Serpentine bending • Prototyping • Sanitary and heating installation • Shipbuilding TECHNICAL DATA 10000: Kdsdpjndk N Ajfx Al Njk Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase 400 V • Bending radius up to 500 mm • Multifunctional machine control with bending angle adjustment (0.1°) • Maximum bending angle 240° • Safety foot switch with emergency stop • Weight: 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 series, with bending radius from 45 mm, incl. 40 mm hex shaft • Profile bender PB20 – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • Small-radius bending device KBV • Special tools according to customer specifications • Software customization for special tasks OUR SERVICES: • Welcome to carry out test production in our in-house demo room • Consultation and information meeting at your site • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your site

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine with manual eccentric quick-release clamping for tube fixation enables efficient bending operations. The compact drive unit with detachable mandrel support offers advantages during on-site installation. Direct position detection on the bending axis ensures optimum bending precision. The bending angle can be set quickly and easily via a convenient touchscreen controller with a user-friendly, menu-driven interface. The advanced control system allows for two speed settings as well as a configurable overbending feature for compensating material springback. The bending process is significantly shortened by the automatic “return” movement at the end of the bend. For more complex bending tasks, bending programs can be stored, offering up to 50 bend angles per geometry. An almost unlimited number of programs and up to 200 materials can be saved to the controller or a USB stick. Plug-in bending tools allow for fast changeover to different tube sizes. For challenging geometries, the machine can be converted as standard to either right-hand or left-hand bending directions. The open bending unit also allows for bends such as railing frames with only a single weld seam. Optional PC calculation software determines the cut length for the entire geometry as well as the feed path, twist, and bending angle for every individual bend. The mandrel retraction is programmable and can be automatically triggered once the predefined bending angle is reached. POSSIBLE APPLICATIONS: • Plant construction, e.g. chemical industry • Hydraulic piping • Prototyping • Pipeline construction TECHNICAL DATA: • Bending capacity: Ø 6 to 50 mm • Minimum/maximum bending radius: 10 mm / 140 mm • Bending radii: 2 x D • Multifunction machine control for bending angle adjustment (0.1° accuracy) • Mandrel support lengths: 1500/3000/4500/6000 mm (special versions are available with longer lengths) • Maximum bending result: 180º • Weight: 300-500 kg (depending on configuration) Optional accessories: • Automatic mandrel lubrication (minimal quantity) • Digital measuring system for length and twisting (resolution 0.1) • Remote control of all functions at the carriage (rotational and length stop) • Bending radius up to 250 mm • PC tube calculation software OUR SERVICES: • Welcome to trial production in our in-house demo room • Consulting and informational meeting at your premises • Consultation and processing of leasing/financing purchase through JUTEC • Trade-in of your current machine Kdjdpfx Asnfvy Usl Nok • Service contracts, on-site maintenance

Stanje: novo, Leto izdelave: 2025, THE PRACTICAL HAND TUBE BENDER: The compact, mobile design allows for precise and consistently repeatable bending operations in a bench vice. Operation is performed via a screw-in handle. A lockable setting ring ensures consistent, repeatable bending angles. The easily exchangeable plug-in tool system makes tool changes straightforward. The 'stationary tube and rotating tool' principle enables bending with minimal space requirements. For thin-walled tubes, slide shoes are used for crease-free bending, enabling the production of bends with minimal deformation from materials such as stainless steel and copper tubes. The optional hexagonal drive version allows, in addition to vice operation, the use of the drive force from the 3000 and 6000 bending systems. The KBV can simply be mounted onto the machine’s bending shaft for this purpose. POSSIBLE APPLICATIONS: • Hydraulic piping installation • Prototype fabrication • Plumbing and heating installation TECHNICAL DATA: • Bending capacity: Ø 6 to 18 mm • Manual bend angle limitation • Maximum bending angle: 180º OPTIONAL ACCESSORIES: Kdodpfx Along Amkj Nok • KBV with hexagonal drive for bending on models 3000 or 6000 • Machine case • Length stop OUR LOCAL SERVICE FOR YOU: • Welcome to test production at our on-site demonstration room • Consultation and information meeting at your facility • Consultation and processing of lease/financing purchase through JUTEC • Trade in of your current machine • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2025, THE PRECISE 3-ROLL BENDING MACHINE The development of this compact and mobile horizontal bending machine was clearly focused on the production of dimensionally accurate spirals, such as handrails for spiral staircases. This represents the highest level of complexity, as two interdependent variables (radius and pitch) must come together in a single bend to create a precise geometry. The interaction between pipe calculation on a PC, implementation on the bending machine, and monitoring with measuring devices, including final corrections of bending parameters, ensures accurate bending. With just a few simple entries in the PC pipe calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for machine operation. A new, powerful drive concept enables stepless adjustment of the bending speed, requiring only a 230 V (single-phase) power connection. Both hardened steel tools and surface-friendly, hard plastic tools are available. To ensure optimal feed, even for tight bending radii, all three bending rollers are driven. The drive concept proves its worth in daily heavy-duty use, whether working on flat surfaces or bending pipes and profiles. Customers of the 4800, 5000, and 6000 bending systems have the option of purchasing the roll bending unit without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 systems via the bending shaft. In this configuration, the machines serve as the drive unit. POSSIBLE APPLICATIONS: • Handrails/underrails for spiral staircases • Large pipe and profile bends • General metal construction TECHNICAL DATA: • Bending capacity: Ø 10 to 60 mm • Minimum bending radius: 300 mm at Ø 42.4 mm • Bending direction: right and left • Digital adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor Ksdpfx Along A R Ss Nodk • Site-ready 230 V connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller – for stabilization • Lifting roller – to produce controlled pitch • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch based on twist • MPW – PC calculation program for determining the correct bending values • RB4303 – Universal bending tool for profiles up to 60 mm in height • Tools for special profiles OUR SERVICE FOR YOU ONSITE: • Welcome to test production at our facility in the demo room • Consulting and information session at your location • Consultation and processing of leasing/financing purchases • Service contracts, onsite maintenance

Stanje: novo, Leto izdelave: 2025, THE COST-EFFECTIVE MANDREL BENDING MACHINE FOR TIGHT BENDING RADII This bending system offers solutions for complex geometries with standard radii of 2xD for tube dimensions from 20 - 90 mm. Depending on the material quality and wall thickness ratio, radii of 1.5xD are also feasible for series production. With a tool height of 120 mm, there are also ample possibilities for special profiles. The highly precise and powerful electric drive of the bending axis, as well as the stable and robust construction of the mandrel carrier and bending arm, contribute to the desired bending results. Quick-change bending tools allow rapid conversion to different tube dimensions. The clamping pressure for tube securing is optimally adjustable. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store virtually unlimited programs for bend angles, lengths, and rotation angles for up to 50 bend sequences per tube. For monitoring spring-back values, a freely programmable database is available for up to 200 materials. The control offers two operation modes: In "Simple Bending", tube segment lengths and rotation are automatically displayed in relation to each other. In "Controlled Bending" mode, data is entered beforehand and a continuous target/actual comparison is performed during bending. Also available with pneumatic rotation stop or with gearbox-assisted positioning for length and rotation. POTENTIAL APPLICATIONS: Kdjdsnh R Suspfx Al Nek • Plant construction, e.g., chemical industry • Hydraulic piping • Metalworking • Prototype construction • Piping installation TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm (depending on material) • Bending radius min/max: 40 mm / 250 mm • Minimum bending radii: 1.5 x Ø (Standard: 2 x Ø) • Multifunction machine control for angle adjustment (0.1°) • Mandrel bar lengths: 3000 / 4500 / 6000 mm • Maximum 180º bending result • Weight: 1600-3200 kg (depending on version) • Ergonomic operation via safety foot pedal OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Larger bending radius up to 300 mm • Positioning of length and rotation via automatic brake function or manual stops using foot pedal • Semi-automatic length and rotation positioning using servomotors • Automatic tool retraction • Tube calculation software • 10-inch touchscreen with integrated tube calculation • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Welcome to perform test production at our in-house demo room • Consultation and information meetings at your site • Leasing/financing advice and processing via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm, both stationary and directly at the installation site. A powerful three-phase motor and a precision gearbox ensure a robust drive. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle can be set quickly and easily via a user-friendly, menu-driven touchscreen interface that ensures even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, each with an angle sequence of up to 8 bends per geometry. The multifunction control allows for variable adjustment of the bending speed for forward and reverse operation, and features a parametrizable overbending function to compensate for material spring-back. By using four material characteristic curves, the material is automatically overbent to the required bending angle, ensuring an accurate bending result. The "stationary pipe, rotating tool" principle ensures a minimal footprint during bending. For thin-walled pipes, sliding shoes are used to achieve wrinkle-free bends and to bend curves with minimal deformation from materials such as stainless steel and copper tubing. With the PB20 profile bending attachment, flat, square and round bars can be bent effortlessly. The KBV small radius attachment enables extremely small bending radii. POSSIBLE APPLICATIONS: • Plant construction • Hydraulic tubing • Meander bending • Prototype construction • Sanitary and heating installation TECHNICAL DATA: Bending capacity 6000SB: Ø 6 to 50 x 4 mm, single-phase 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm, three-phase 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm, three-phase 400 V • Minimum/maximum bending radius: 36 mm/280 mm • Optional large bending radii up to 500 mm • Multifunction machine controller, bending angle setting (0.1° precision) • Maximum bending angle 240° • 40 mm hexagonal shaft for quick tool change • Safety foot switch with emergency stop • Weight 110 kg OPTIONAL ACCESSORIES: • PB20 profile bender – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • RB43 roller bender – The RB43 is mounted on the hexagonal shaft of the bending axis. By switching to continuous bending, the bending system functions as a drive unit. • KBV small radius attachment Kdsdpfxsng Ax Sj Al Nok • Special tools according to specification OUR LOCAL SERVICE FOR YOU: • Welcome to conduct test production in our in-house demo room • On-site consultation meeting • Advice and processing for leasing/financing purchases • Trade-in of your current machine • Service contracts, maintenance at your site

Leto izdelave: 2020, stanje: novo, Title Strassburger Filter SF400oDEC/30S Integra – Stainless Steel Plate Filter Press – Year 2020 – NEW / Unused Short Description For sale are unused, originally packaged plate and frame filter presses from the renowned German manufacturer Strassburger Filter GmbH + Co. KG. The units are in factory-new condition, have never been operated, and remain in their original packaging from the factory. Manufacturer Strassburger Filter GmbH + Co. KG (Germany) Model / Type SF400oDEC/30S, Integra format Machine designation: FI6722 – FP PRE 1 Year of manufacture 2020 Serial number including 032003303920 (additional serial numbers available) CE marking Yes Condition New / unused Originally packaged Never installed, never operated Stock item Quantity available 4 identical machines available New price New price €94,000 per unit (Total new value for 4 machines: €376,000) Design / Material Completely stainless steel Plate and frame filter press Gasketed plates Pharma/Biotech version Hydraulic closure incl. hydraulic unit CE compliant Technical Data Plate size: 425 × 400 mm Number of filter chambers: 28 Total filter area: approx. 3.4 m² Total volume: approx. 13.6 liters (100%) Max. operating pressure: 6 bar Max. operating temperature: 95 °C CIP / SIP capable (cleaning up to 121 °C) Dimensions & Weight Length: approx. 1,649 mm Width: approx. 600 mm Height: approx. 1,145 mm Frame weight: approx. 480 kg Plate package weight: approx. 120 kg Plate Package 14 filter plates 13 filter frames 1 end frame 1 partition plate 28 filter sheets per setup Hydraulics & Drive Hydraulic closure Hydraulic unit included Motor power: 1.5 kW Electrical connection: 400 V / 50 Hz Valve voltage: 24 V DC Compressed air requirement: 3.0 bar Connections Product inlet and outlet DN25 Vent/Drain DN15 Connections according to DIN 11864-2 Drip tray included Areas of Application Pharmaceutical production Biotechnology Kdodpfxox Ihufo Al Nek Chemical industry Pre-filtration Precipitation and clarification processes Location Germany Viewing available by appointment Immediately available

Leto izdelave: 2003, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 03234, Stroj za odstranjevanje oksida s 6 krtačami (3 pari) za jekleno žico premera 5,5–16,0 mm (nizkoogljično jeklo). Pari krtač so razporejeni s 60-stopinjskim zamikom za maksimalen učinek. Zelo čist in urejen stroj. Priporočamo ogled in pregled na lokaciji. Kodpsx R Uzdjfx Al Nodk

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, nosilnost: 5.000 kg, debelina vilic: 80 mm, širina vilic: 180 mm, Telescopic crane 5,000 kg at a load center of 600 mm Telescopic length at hook: 3,600 mm with 950 kg payload Kdedpfoiuh I Asx Al Njk Load capacities for different load centers: see load chart One swivel hook with 5,000 kg load capacity including shackle One swivel hook with 3,000 kg load capacity including shackle Height adjustable by pin locking system Galvanized locking pins, secured with wire Fork pockets suitable for forks up to 180 x 80 mm Safety chain to prevent the crane from slipping off

Stanje: dober (rabljeno), Peskalna naprava z steklenimi kroglicami, z odsesovanjem in reciklažo abraziva Kodpfx Aljyzalps Nsdk

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, The tumble belt blast machine is specifically designed for cleaning and derusting bulk materials. It operates reliably and is easy to use. Due to its robust construction and powerful turbine, the machine is ideally suited for daily use in production environments. Technical Data: Capacity: 180 liters Turbine: 1 unit, model 3.6.10 Turbine power: 11.0 kW Turbine control: frequency-controlled Workpiece data: - Max. diagonal: 270 mm - Max. workpiece weight: 25 kg Tumble belt: perforation Ø 8 mm Abrasive: - Suitable for round blasting media - Automatic refill silo: 100 liters - Integrated abrasive dosing system Extraction & Noise: - Sound pressure level without noise protection ≤ 85 dB(A) - Filter unit can be positioned left or right Year of manufacture: expected calendar week 31/2026 Features: - Wear-proof lining made of manganese in direct and indirect blasting zones - Turbine housing with wear-resistant steel lining - Turbine blades made of high-strength tool steel - Turbine guide channel also made of tool steel - Abrasive return channel located beneath the machine for optimal recycling Options: - Paint finish according to customer specification - Flexible filter position (left/right) Kdsdpjyxpvljfx Al Nok - Feeding solutions available on request

Leto izdelave: 2009, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, največja dolžina izdelka: 1.400 mm, največja širina izdelka: 1.000 mm, Oprema: CE označba, TEHNIČNE PODROBNOSTI Število peskalnih turbin: 4 Moč na peskalno turbino: 22 kW Kjdpsyua D Rsfx Al Nsdk Količina peskanja na turbino: 7 kg/uro Hitrost peskanja: 450 kg/min Hitrost curka: 80 m/s Največja dimenzija izdelka: 1.400 x 1.000 mm Premer kabine: 2.200 mm PODROBNOSTI O STROJU Krmljenje: Siemens OPREMA Vibracijsko sito za brusne/peskalne materiale in izhodne materiale Dovod prek zunanjega tirnega sistema CE-označevanje

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, obratovalne ure: 1.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 5800, Satellite blasting system for cleaning with nutshell granulate (our application: condenser windings). Other blasting media possible. Kdsdpfxsvnrymj Al Njk

Leto izdelave: 2001, stanje: rabljeno, Technical Details: Number of turbines: 1 unit Drum length: 580 mm Operating hours: 30,810 h Compressed air: 5 - 7 bar Filling volume: 100 dm³ Total power requirement: 24.2 kW Total weight: approx. 5.8 t DRUM BLASTING MACHINE with enclosed drum Manual and automatic operation Technical specifications: - Blasting wheel Ø = 380 mm - Drum Ø = 1150 mm x length 580 mm (perforation 4 mm) - Max. filling weight = 220 kg, filling volume 100 dm³ - Workpiece size (max. edge length) = 100 mm - Turbine Ø 380 mm with 15.0 kW - Abrasive discharge speed approx. 80.0 m/s - Abrasive throughput/turbine approx. 240.0 kg/min. - Recommended abrasive type: StD-Z 0.6 DIN 8201 HV 700 - Compressed air with cartridge filter system approx. 12 m³/h The machine is set up in Leipzig! It is not electrically connected. Sale as currently standing in stock Leipzig (see last photos). Machine was functional prior to dismantling. Kdedsu Nu Nkjpfx Al Nok

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Technical Data Fully automated wet blasting system Workpieces to be processed: Engine components, other parts Rotary table size: Ø 1300 mm Rotary table speed: 1 – 30 rpm Rotary table load capacity: 500 kg Max. workpiece size: Ø 1500 mm, height 1000 mm Number of blasting nozzles: 1 – 4 Blasting pressure: 0.5 – 6 bar (± 0.01) Cabin lighting Abrasive used: Al2O3 500 mesh as lapping abrasive Kodpjwi Hcwofx Al Nodk Abrasive delivery system: Feed pumps Maximum flow rate: 120 l/min at up to 35% concentration Aluminium oxide

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Machine type: Vapormatt Vapormate Manufacturer: Vapormatt Kedpoyq Ri Nsfx Al Nsdk The Vapormate is our extremely versatile, manual entry-level system. It is a very popular unit for users who require a compact solution for smaller spaces or wish to test wet blasting technology before investing in a larger system. The Vapormate comes equipped with all the features you would expect from one of our larger manual systems. Wet blasting was invented in the 1950s by Vapormatt. In over 70 years of further development in wet blasting, the Vapormate has become an ergonomically as well as economically optimized system. The integrated water recirculation system ensures efficient use of consumables. Wet blasting offers a gentler and more uniform processing of parts thanks to water as the carrier medium, in comparison to, for example, dry blasting. With this technology, you can achieve smooth and even surfaces on your components. Further technical information can be found in the attached brochure. The price stated is net plus the currently applicable statutory VAT and shipping costs. The equipment shown in the pictures may include accessories, which are optionally available and subject to additional costs. The quoted price refers to the base machine. If you are interested, we look forward to hearing from you. We would be happy to offer you advice without obligation. The European Commission provides a platform for online dispute resolution (ODR). This offer serves exclusively as an online presentation of our goods. Contract negotiation takes place via telecommunication (email, telephone, messaging portal). In the first step, we will send you a non-binding offer, which will also provide information about our general terms and conditions with legal notice (impressum) and your right of withdrawal before any purchase/contract is concluded.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, potreba po zraku: 1,13 m³/h, pritisk: 7 letvica, trajanje garancije: 24 meseci, skupna širina: 1.370 mm, skupna višina: 2.080 mm, skupna dolžina: 1.150 mm, skupna masa: 350 kg, Oprema: kabina, osvetlitev, The Vapormatt PUMA is a high-quality, versatile manual wet blasting cabinet from Vapormatt, the leading company in the wet blasting sector and the inventor of this technology in the 1950s. After over 70 years of ongoing development in wet blasting, the result is the ergonomic and efficient Vapormatt PUMA system. A loading basket enables processing of small batch parts, while a clamping fixture allows easy handling of rims or wheels. Large workpieces weighing up to 125 kg can also be placed on the robust stainless steel grate. An optional stainless steel turntable further simplifies handling. The integrated recirculating water system with cascade tank, filtration unit, and return pump ensures economical use of water and blasting media. Wet blasting provides a more gentle and uniformly consistent finish compared to, for example, sandblasting, thanks to water as the carrier medium. This technique allows you to achieve smooth, homogeneous surfaces on your components. Technical Data: - Internal dimensions: 1100 x 1100 x 1200 mm (L x W x H) - External dimensions: 1400 x 1200 x 2100 mm (L x W x H) - Pump power: 2.2 kW (400 V / 50 Hz) - Sump volume: approx. 142 L water / approx. 15-40 kg blasting media - Work surface load capacity: 125 kg All prices quoted are net plus the currently applicable statutory VAT and shipping costs. Equipment shown in the images may include optional accessories available at additional cost. Ksdpoyq Ri Ajfx Al Nsdk If you are interested, we look forward to hearing from you. We will be happy to advise you—without obligation. The European Commission provides a platform for out-of-court online dispute resolution (the OS platform). This offer is exclusively an online presentation of our goods. Contract negotiations are conducted via telecommunication (email, telephone, messaging portal). We will initially provide you with a non-binding offer, which will include our general terms and conditions, legal notice, and information on the right of withdrawal, before a purchase or contract is concluded.

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), Na voljo je kontinuirana tračna peskalna naprava Rösler. Nazivna moč: 72kW, količina polnjenja abraziva: 1500kg, zmogljivost peskanja: 600kg/min, peskalna kolesa: 4, tip peskalnega kolesa: H28HM, skupne dimenzije naprave D/Š/V: pribl. 12400mm/3800mm/2300mm, maks. teža posamezne komponente: 6000kg. Dokumentacija je na voljo. Ogled na lokaciji je možen. Kedpfxeyi E Epj Al Nsdk

Leto izdelave: 1995, stanje: pripravljen za uporabo (rabljen), A Gutmann blasting machine, completely overhauled by Rösler in 2019, is available. Documentation is included. An on-site inspection is possible. Ksdpjwftcpofx Al Nsdk

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), Elementi: elektro omare, strojno ohišje (kabina, turbine, iztok, vtok), oder s pripravo in zalogovnikom, zvočno izolirana kabina, udarni zaboj, vedrovo dvigalo, rešetke, lestev, predhodni udarni zaboj, drobni deli, cevovod, kabelske kanale, peskalno sredstvo in rezervoar za ponovno polnjenje. Priključek za stisnjen zrak: 1/2 palca pri 4-6 bar, poraba stisnjenega zraka: ca. 1,5 m³/h, pripravljen po DIN ISO 8573-1, velikost trdnih delcev: 1 µm, gostota: 1 mg/m³, vsebnost vode: tlakovna rosišče 3°C, vsebnost olja: 1 mg/m³, dolžina: 11.000 mm, višina: 5.907 mm. Z dokumentacijo. Ogled na lokaciji je možen. Kodpfextprtex Al Njdk

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), Useful diameter: 1000 mm, useful height: 450 mm, max. load: 900 kg, connected load: 7.34 kW, turbine output: 5.5 kW, impeller diameter: 334 mm, throwing blades: 6, discharge velocity: 30 m/s - 70 m/s. Machine dimensions (LxWxH): approx. 3000 mm x 3000 mm x 3500 mm, weight: approx. 2050 kg, operating hours: 2559 h. Documentation available. Inspection on site is possible. Kdjdpsvdu N Nsfx Al Nsk

Stanje: rabljeno, Leto izdelave: 2017, Technical details: Operating pressure: 12 bar Ksdpsvvvrpjfx Al Nsdk Tank volume: 200 l Total weight approx.: 220 kg Dimensions (L x W x H): 1.2 x 1.1 x 1.8 m Mobile pressure blasting vessel – sand blasting unit Pressure of blast vessel up to 12 bar Test pressure: 17.2 bar Fully equipped with: - Remote control valve - Remote control lever - Electro-pneumatic remote control - Tungsten carbide blasting nozzle Including 10 m nozzle hose (internal diameter)

Stanje: rabljeno, Technical details: Material diameter (min-max): Ø 20-30 mm Material length: approx. 70 mm Number of turbines: 3 units Blasting hours: approx. 200 Space requirement: total height approx. 4.5 m Connected load: approx. 40 kW CONTINUOUS SPRING SHOT BLASTING SYSTEM (SPRING HARDENING) Application: For the blasting treatment/hardening of springs in a continuous process. The springs are conveyed through the blasting system by means of a drag chain which is exposed to the blasting stream. The conveying speed of the drag chain is adjustable. Kodpfx Alou Nu I To Nsdk Very little used, approx. 200 operating hours The system consists of: - Machine housing, internal (high-alloy tool steel – hardened) with replaceable blasting plates - Conveyor system - 2 shot chamber maintenance doors - Bucket elevator - Shot chamber length/depth: approx. 2000mm / approx. 670mm - Blast media: steel shot Ø 0.3 – 0.8mm - Material to be processed: springs Ø 20 – 30mm x L:70mm - Drive power of drag chain 1.1 kW - Conveyor speed max. 15 rpm - Initial shot media load approx. 500 kg (per system) - Connected load approx. 40 kW Condition: - without turbine blades (can be retrofitted at extra cost) i.D.