Sistem za mokro peskanje

SES 1500 S

Stanje: dober (rabljeno), Unit: REWA chamber filter press, used Type: 470-15-25K-HP Design: side-bar guided Filter plate size: 470 x 470 mm Number of plates: 15 Filter plates: PP Filter cloths: optionally available, tailored to the specific medium Chamber volume: approx. 57 dm³ Filtration pressure: approx. 15 bar Material (product-contacting parts): Flange, tie rods stainless steel, PP or rubber-lined Fsdpsqakbrefx Af Sjga Material (non-product-contacting parts): Stainless steel Purchase or rental: Inspection of the equipment can be arranged by appointment at our facility. Other information: We supply this unit used, fully functional or refurbished and customized to your requirements. Are you interested in renting or purchasing this unit? Contact us, we are happy to assist you.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Löser centreless tube grinding machine - belt grinding machine - centreless tube polishing machine - cylindrical grinding machine Centreless tube grinding/polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing applications and has since only polished around 10,000 parts. Following that, the machine was taken out of operation. As part of the complete overhaul, all motors, bearings, and the entire control cabinet, including frequency converters, were replaced with new components. The machine is suitable for both wet grinding and polishing. Fgedpfxjpugwie Af Ssa A wastewater treatment unit, including pumps, is currently not available. However, we can retrofit this as per customer requirements. The conveyor systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors offer a power output of 7.5 kW per station. The system can be inspected by appointment in our warehouse at D-63128 Dietzenbach.

Stanje: dober (rabljeno), številka stroja/vozila: RTT HAU T3, Used rotary index table polishing machine Manufacturer: Hau Fgodpfxsh Ug Ule Af Sja Rotary indexing table with 6 work spindles and 3 polishing stations equipped with high-pressure guns, 5.5 kW motors, control cabinet

Stanje: rabljeno, Tenon cutter / Dowel saw LOSER model AA220 - USED - Capacity: 7500/1500 dowels per hour Fgedpfoqpdkcjx Af Ssa - Dowel diameter capacity: 6–18 mm.

Leto izdelave: 2011, stanje: dober (rabljeno), Sušilna peč, temperirna peč Caltherm 200 C Naprodaj v odličnem stanju, večnamenska konvekcijska peč z mešanjem zraka za toplotno obdelavo, proizvajalca CALTHERM. Električno ogrevana enokomorna peč z mešanjem zraka. Proizvajalec: Caltherm J7172 Leto izdelave: 2011 Notranje dimenzije: Širina: 300 cm Višina: 200 cm Dolžina: 185 cm Maksimalna projektna temperatura: 200 °C Testna temperatura: 200 °C Čas dosega nastavljene vrednosti: 45 min Število grelnih elementov: 12 x 3,6 kW Fjdpfx Afovu Hvpj Sjga Ventilatorski motor: 15 kW Priporočena skupna električna priključitev: 100 A Tip regulacije temperature: West 6400 Zunanje dimenzije: Širina: 430 cm Dolžina: 330 cm Višina: 300 cm Teža: ca. 4800 kg

Stanje: delavnici obnovljeno (rabljeno), Rotary Table Polishing Machine from Bula, Model MP81 for sale. Fodpfx Afslccvmj Sega Continuously rotating automatic machine for polishing, brushing, grinding, and deburring a wide variety of workpieces. 6 workpiece holders mounted on a 250 mm pitch circle. 1 processing station, drive power 2.2 kW, equipped with Bula Quick Lock system for polishing discs. Polishing spindle diameter 25 mm. The machine has been completely overhauled: machine body sandblasted, primed, newly painted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled via frequency converters. Subject to prior sale. Optionally, the system can also be supplied with a liquid polishing compound system, consisting of 1 high-pressure dosing gun WIDOBERG HDP-2, bracket, timer, etc., and pressure vessel. WE CAN ALSO OFFER TO REPAIR OR REFURBISH YOUR EXISTING MACHINE OR A BULA MACHINE YOU ACQUIRE THROUGH ANOTHER CHANNEL.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, moč: 88 kW (119,65 KM), temperatura: 220 °C, ogrevalna zmogljivost: 30 kW (40,79 KM), višina obdelovanca (maks.): 1.500 mm, dolžina obdelovanca (maks.): 500 mm, izolacijski material: Steinwolle, debelina izolacije: 150 mm, širina obdelovanca (maks.): 500 mm, Scope of delivery: 1. Chemical pre-treatment by spraying (in intermittent operation) 2. Dryer 3. Powder coating system 4. Powder curing oven 5. Conveyor system, semi-automatic Fgedpfjulwg Nsx Af Ssa 6. Electrical control system Hall / Footprint System footprint max. 12,000 x 6,500 mm Hall floor: Industrial concrete floor Workpiece sizes Max. part dimensions: L = 500 mm, H = 1,500 mm, W = 500 mm Part spectrum: Steel Conveyor system P&F chain conveyor in intermittent operation, semi-automatic Pre-treatment Chemical Supply requirements Electricity: On-site supply (max. 88 kW) Gas: On-site supply Compressed air: On-site supply Water: On-site supply Specification System type: Intermittent operation system Conveying speed: 3.2 meters / min Stroke length per cycle: L = 1,600 mm Cycle movement time: Tm = 1.6 meters : 3.2 meters/min = 0.5 minute Cycle standstill time: Ts = 8.5–12 minutes Total cycle time: Tt = Tm + Ts = 9–12.5 min Electrical energy: Total power 88 kW Min. average consumption: 60 kWh Max. average consumption: 70 kWh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Cell with Kuka KR 180 Grinding Robot Grinding cell Berger 2012 (External grinding A1) - Total weight approx. 6,300 kg - Cell dimensions: approx. 4650 x 2400 x 3100 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of manufacture: 2011 - KRC 4 control system Fgsdeg Saqvopfx Af Sea - Additional axis (7th axis) Belt grinding station BSS10 - Max. belt dimensions 3500 x 30 mm - Max. contact wheel diameter 200 mm - Motor power 4 kW 2 x polishing stations - Polishing wheel diameter 350 - 600 mm - Power 5.5 kW Gripper exchange cabinet Interoll Automation GmbH belt conveyor - Total length approx. 2000 mm - Belt width approx. 440 mm The price includes a complete concept as shown in the video. We have 4 such cells available. It is possible to manufacture each detail as seen in the video.

Stanje: novo, Leto izdelave: 2026, The KDP220TOP sandblaster is a top-quality product, designed to deliver long-lasting and reliable performance. It enables users to quickly and effectively clean the surfaces of various components. Equipped with an overhead opening supported by telescopic cylinders, it significantly improves workplace ergonomics and facilitates loading of heavy elements. The 220-liter tank capacity allows for efficient cleaning of larger surfaces in a short time. Fgjdpfevzqf Uex Af Ssa Advantages of our sandblaster model: - Fully equipped and ready for immediate use - Convenient blasting gun with 4 interchangeable ceramic nozzles - Large, stable front doors with a rubber circumferential seal to ensure safe and dust-free operation - Telescopic cylinders for increased operator comfort - High-quality integrated rubber gloves - Vent connection - Efficient lighting of the work area - 4 pieces of replaceable protective foils for the viewing window - Sandblasting hose positioned at the bottom of the collection container - Compatible with various abrasives - Drain opening for quick change of blasting media - Ease of operation, reliability, and operator safety Technical specifications: KDP220TOP technical data: AIR CONSUMPTION: 400-700 L/min MAXIMUM PRESSURE: 8 BAR AIR CONNECTION: quick coupling 1/4" ABRASIVE TANK CAPACITY: +/- 18 kg EXTRACTION (VENT) CONNECTION: 63 mm VIEWING WINDOW AREA: 540 x 250 mm FRONT HEIGHT: 370 mm INTERNAL CABINET DIMENSIONS (LxWxHmin-max): 840 x 550 x 370-550 mm EXTERNAL CABINET DIMENSIONS (LxWxHmin-max): 890 x 560 x 1118-1380 mm WEIGHT: 49 kg DC23 technical data: MODEL: DC23 VOLTAGE: 220V POWER: 1200W VACUUM: >12 Kpa INLET DIAMETER: 45 mm CAPACITY: ~16 l Standard equipment: - Work area lighting – 12 V fluorescent lamp powered by 230 V with switch - 2 high-quality integrated rubber work gloves - 2 extraction (ventilation) connections, 63 mm and 90 mm, enabling connection to an extraction unit - Blasting gun with 4 interchangeable ceramic nozzles (sizes: 4, 5, 6, 7 mm) - 4 replaceable protective films for the window/viewer - Top doors with rubber seals to ensure dust-free operation - Stable grate in the work area - Instruction manual in Polish - DC23 dust extractor - Connecting hose ~2 m - Bag filter

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), Description to follow! Fedpfxex A H Rxj Af Soga