STROJ ZA REZANJE FAZONSKIH DELOV / REZALNIK ČEPOV

Löser AA220

Stanje: dober (rabljeno), Koda: 0103 Ndedpfewfdctex Agged Znamka: LOESER - NEMČIJA Model: AA-220 Stroj za proizvodnjo lesenih moznic, komplet z 2 moznicama

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, 2 vacuum drying ovens, GMP-compliant, by Vötsch Industrietechnik (also available for individual sale). Product-contact material is stainless steel 1.4435. Heating type: externally heated hollow plates; the ceiling is also heated, double-walled with internal serpentine flow guides, pressure-tight up to 3 bar. Heating is provided via a heating/cooling circuit (indirect heating with hot water) using a separate hot water thermostat. Operating temperature: max. 95°C, internal vessel operating pressure: 0 to 1 bar abs. Nsdpfeucdqnjx Aggsdd External dimensions: 1,485 mm width (housing), 2,000 mm height (housing), 1,700 mm depth. Trays: 1,200 mm width x 950 mm depth. Number of trays: 13 units. Usable area: 14.8 m². Weight: approx. 2,900 kg per dryer. Connections: hot water connection (supply and return), vacuum connection. Heating of the vacuum drying ovens via heating medium, e.g. water, with connections at the rear. Heating medium heated by a temperature control unit Type 95-36-E, rated voltage 400 V 3/N PE AC, 50 Hz, device heating capacity 36 kW, heating capacity can be reduced to 18 kW within a specified temperature range.

Stanje: novo, Leto izdelave: 2025, Spray-Flood Cleaning System – Parts Cleaning Machine Washing (600 liters) + Rinsing (430 liters); electrically heated; The cleaning process can be performed via spraying, flooding (injection flood cleaning), and with ultrasonic support. The basket can remain stationary, oscillate, or rotate during the cleaning cycle (freely selectable via the program). Drying via hot air and vacuum drying. Basket usable dimensions (LxWxH): 600 x 400 x 300 mm Nodpfehu Sg Iox Aggsdd Maximum load weight: 150 kg Loading table in front of the machine included Control: Siemens S7-1200 with 20 programs

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, READY FOR IMMEDIATE USE! This degreasing system operates under vacuum using modified alcohol. Degreasing of metal components contaminated with oil and chips from mechanical processing. Usable solvents: modified alcohols Hydrocarbons class AIII (flash point > 55° C) Ultrasonic Weber 750W 40kHz Double loading table Double bag filter Oiling for corrosion protection (spraying) Ndedpohg Ugijfx Aggjd Cartridge filter Very good condition (the system has been used very little) 6 months warranty From Metalclean AG service System process: spraying, immersion, ultrasonic cleaning, vapor degreasing including vacuum drying. Data: Basket dimensions: 480 x 320 x 200 h mm Maximum loading weight: 50 kg Average batches per hour: up to 5 System dimensions: 1600 x 1600 x 2400 mm (h) System weight: 2300 kg Electrical power requirement: 16 kW Energy consumption: 10 kW/h Solvent volume: approx. 250 liters

Stanje: skoraj kot novo (rabljeno), Double-shaft multirip saw A. COSTA PUMA 2/50 350/160 – Italian manufacture TECHNICAL SPECIFICATIONS: cutting width: 350 mm cutting height: 160 mm main motors: 37 and 45 kW feed motor: 3 kW adjustable lower shaft width max. blade diameter: 280 mm spindle diameter: 2 x 60 mm sleeve diameter: 2 x 80 mm feed chain width: 350 mm total power: 85 kW two feed speeds: 15 and 22 m/min centralized lubrication minimum workpiece length: 600 mm electric height adjustment Ndodpjqy E Rlofx Aggsd electrical shaft height adjustment six upper pressure rollers mechanical roller hold-downs four anti-kickback pawls cast iron frame extraction port diameter: 2 x 220 mm spindle speed: 4500 RPM machine dimensions (L/W/H): 250 / 235 / 210 cm weight: ~ 5000 kg

Stanje: novo, Leto izdelave: 2018, For sale is an unused Rösler FKS 35 Tandem with soundproof cabin, manufactured in 2018. The system is still in its original packaging and available from our warehouse. You are welcome to arrange a viewing appointment on site after prior telephone consultation. Ndedpfx Asl D Ex Deggod

Stanje: zelo dobro (rabljeno), JET is a numerically controlled machining center with 5 interpolated axes, designed for the following machining operations: Tenoning / Finger jointing / Drilling Mortising / Milling / 4/5-axis profiling. Ndodpfx Agoirmyqjgsd Technical specifications: Fully digital NC axes: 5 Interpolated linear axes: 3 Interpolated rotary axes: 2 Longitudinal axis X: 1,800 / 2,200 mm Transverse axis Y: 1,300 mm Vertical Z axis: 650 mm Clamping table length: 1,400 / 1,800 mm One axis - unlimited C-axis: +/- 180°

Stanje: rabljeno, Leto izdelave: 1979, številka stroja/vozila: 5255, Pressure: 30 t Stroke rate: 100–600 strokes/min Sheet width: 120 mm Table size: 540 x 450 mm BRUDERER precision double-roll feeder: left side Adjustable stroke (min–max): 16–40 mm Distance between columns: 330 x 300 mm Total power requirement: 5.5 kW Machine weight approx.: 3 t Space requirement approx.: 2.10 x 1.65 x 0.75 m Nodpfx Aecxxu Neggjdd High-speed stamping press in three-column design, equipped with air cooler, piece counter, separate control cabinet, air clutch, and BRUDERER precision double-roll feeder, left side.

Stanje: dober (rabljeno), Leto izdelave: 1996, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / ready for operation Operating Principle Processing of construction timber for chalet construction / log house manufacturing The beams can be processed in a single pass • Cutting to length • Horizontal and vertical milling of tenons / grooves in a single clamping • Drilling • Milling of end grooves Workpiece: • Max. cutting height: 200 mm • Max. cutting width: 250 mm Robust welded construction design. Machine (horizontal and vertical milling unit) with 4 special milling motors, equipped with hardened and ground guides for maximum machining precision. Carriage guided by dust-protected and preloaded ball bearing rollers. Working area up to 200 x 250 mm. Fully operational, with contactor control, motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for on-site chip extraction, with 2 eccentric clamps, without milling tools (rebate heads). With hydro-pneumatic horizontal and vertical feed, electrically controlled, operating together with spindle motor start-up. Rapid traverse and feed are steplessly adjustable. Fully wired and installed, including air maintenance unit. Beams with a thickness of more than 14 cm must be processed in two clamping steps. Such beams must be repositioned for re-milling to account for the excess thickness. Safety covers over moving parts with gas strut weight compensation. Machine Description / Equipped with: 1. Saw Unit: Manual feed Spindle adjustment with analog scale display Saw blade Ø max. / Bore Ø: 400 / 30 mm Tungsten carbide tipped with chip depth limiter (same direction of rotation) Adjustable riving knife Motor speed: min⁻¹ 2900 Power kW: 2.2 2. CM Milling Unit (Log House Unit) Hydro-pneumatic feed Spindle adjustment with digital scale display Horizontal milling unit Cutter Ø: 180 mm Max. cutter width: 130 mm For cutter widths above 60 mm, only cutters made from aluminum alloy with indexable inserts are to be used 2 motors, hydro-pneumatic feed, each 2.2 kW Hydro-pneumatic feed Rapid traverse and feed speed steplessly adjustable 3. Drilling Unit: Manual feed Spindle adjustment with analog scale display Drill holder: Collet ER 25 Clamping Ø max.: 16 mm Drill Ø max.: 32 mm Motor: min⁻¹ 1450, 1.8 kW 4. End Milling Unit Hydro-pneumatic feed Spindle adjustment with digital scale display Max. cutter Ø: 230 mm Max. cutter width: 60 mm Motor: min⁻¹ 2900, 3.0 kW 2 V-belts SPZ 9.5x1000 La Pneumatics On-site operating pressure min/max. MPa (bar): 0.7 / 1 (7 / 10) Air consumption Nm³/h: 8 Electrics Operating voltage V / Hz: 380, 50 Rated power kW: 8.8 - 15.8, depending on configuration Required on-site fuse: A 3 x 25 slow-blow Maximum simultaneous power in use: 4.4 kW Dimensions Machine width: 2400 mm Machine depth: 1600 mm Njdpfx Ageu Uh T Djgsdd Overall height (guard down): 1600 mm Overall height (guard up): 2200 mm Extraction connection Ø (floor extraction): Weight approx.: 1300 kg Incl. roller conveyor 2 x 6 m (2 x 4 m) Technical specifications subject to change!

Stanje: rabljeno, Leto izdelave: 2007, No. 3177 Grecon Dimter OptiCut 200-1 Optimizing Crosscut Saw Used, year of manufacture: 2007 For cutting fixed lengths Wood dimensions to be processed: Infeed lengths min./max. 3,000 – 5,000 mm Infeed widths min./max. 80 – 200 mm Infeed thicknesses min./max. 38 – 80 mm Max. wood cross-section: 200 x 50 mm End product length min./max. 700 – 1000 mm Njdpfeu Atmuex Aggedd Average number of cuts per board: 5 Wood types: softwood or hardwood Performance data: Feed speed max. 180 m/min, infinitely variable Time per crosscut incl. braking: 0.7 – 1.2 s Component overview: Pos. 1: Infeed conveyor belt in front of the saw Length 1.5 m, linked to the saw’s feed motor Pos. 2: Automatic crosscut saw OptiCut 200-1, left-hand version With integrated length measuring wheel and built-in waste extraction unit Graphical input terminal, 1/4 VGA display, with numeric keypad and function keys, including OptiCom software package for system control The machine is loaded from the left Pos. 3: Outfeed conveyor/sorting station with drive unit, without ejector Belt length approx. 1.5 m The machine is already dismantled and in storage. The infeed table was not used by the previous owner. Two feed rollers were installed for material feed. The conveyor table is included, only the rubber belt is missing. Sale on behalf of client, ex location Austria, without transport and assembly Subject to errors in description and price Optional transport and loading by us possible To avoid misunderstandings, an on-site inspection by appointment is possible and recommended Sale in as-is condition Technical data, condition description, year of manufacture and scope of supply according to manufacturer’s brochure and/or previous owner, without guarantee Subject to prior sale No warranty given for used machines; the sale is governed by “purchased as seen” Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location