Mütek Mpp Nem 90 nakup rabljenega (11.715)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine available at a special price Another machine immediately available (ex works Neckartailfingen) * Includes 1-year warranty. Your advantages: + Very robust, straightforward technology + Excellent value for money + Suitable for continuous operation + Long-established, reliable machine Includes control cabinet with timer operation The press is manually activated and then runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square) Briquette length: 5-40 mm (material-dependent) Throughput capacity: up to 20 kg/h max. (material-dependent) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Material requirements: - Wood shavings and dust smaller than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals, and minerals accelerate wear --- Options at extra cost: - Timer function + €490 (net) Machine is started manually and switches off automatically after set time X. Djdjd Nnwlepfx Aplokl - Fill level sensor for automatic operation + €1,450 (net) Press starts and stops automatically * NEW!!! Now available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €890 (net) (delivery time approx. 8 weeks) - Special pressing units + €2,950 (net) ---

Stanje: novo, Leto izdelave: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (Shipping €14.90 net) *Please refer to image 2 for construction lengths Dsdpfetqfhxjx Aplokl The active side features a stainless steel end plate (material 1.4301). Threaded holes are provided on the reverse for mounting *Handle available on request The block magnet systems can be used up to a maximum operating temperature of +100°C. The magnet surface should be cleaned regularly of captured iron parts. Attraction heights for all types, e.g.: For an M5 steel nut approx. 60 mm For an M5 x 30 screw approx. 100 mm Mounting Example 1: Mounted above a conveyor belt, the iron parts "jump" onto the magnetic contact surface. Mounting Example 2: Installed in a pipeline system in direct contact with the material flow. For high separation security, a cascade arrangement of several block magnets in series is possible. Installation and safety instructions: When handling, even during unpacking and later mounting, ensure that no loose iron parts, such as tools or screws, are nearby. The magnetic force is so strong that painful injuries can occur if fingers get caught between iron parts and the active surface. No steel parts should be present within a minimum distance of 400 mm underneath the active surface.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 55 h, Machine with special rotor Available immediately Advantages: + special rotor, designed with reduced knife protrusion for processing both hard and soft materials + 22 kW motor + effective square knives *For pallets: up to a maximum of 10 pallets per hour (output depends on screen and material). Significantly higher throughput possible for smaller wood residue. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *interchangeable Extraction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: Colour of the unit may vary Weight: 1,920 kg Standard equipment included: - Control cabinet with PLC controller - Automatic star/delta start - High-speed hydraulics - Automatic stop when rotor idles Dkedpfx Apex Af Rdolel - 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing incremental control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angled discharge conveyor (discharge height approx. 220 cm) + €12,980 net - Over-belt magnet + €5,980 net - Control for conveyor and over-belt magnet + €2,750 net (Start/stop synchronised with shredder) - Extended feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Material feed must be free from metals and mineral contaminants. Damage to the tools and/or increased wear may result otherwise.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Machine available at a special price Dkodsfci D Aspfx Aplol Machine available immediately (ex works Neckartailfingen) Demonstration unit Your benefits: + Very robust, simple technology + Excellent price/performance ratio + Suitable for continuous operation + Proven, well-functioning and established machine over many years Includes control cabinet with timer operation The press is manually started and runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm (depending on material) Throughput capacity: up to max. 25 kg/h (depending on material) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V – 50 Hz Noise emission: 62 dB Raw material requirements: • Wood shavings and dust less than 15 mm in length • Moisture content less than 15% ATRO • Sand, stones, metals, and minerals increase wear --- Options at extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after the set time X. -Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €690 net (delivery time approx. 8 weeks) ---

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Special-purpose machine for plastic size reduction Base machine from €24,990 net Ideally suited for shredding: - Paper, cardboard, pipes, profiles, crates, canisters, buckets, cans, wood pallet offcuts, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Included: - Special rotor with embedded knives (reduced torque loading) - Minimal cutting gap between rotor and counter-knife Motor: 18.5 kW; 400 V - 50 Hz - 3-phase Control: PLC Cutting chamber opening (top): 600 x 800 mm Input material should be max. approx. 500 x 500 mm (height less critical) Hydraulically operated pusher Dedpfxod H R Sxo Aplskl Screen perforation as desired (25–40 mm) For plastics, coarser screens are recommended (30–40 mm) *For finer granulation, a two-stage shredding system with downstream MVZ granulator (screens 5–15 mm) is recommended Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (L x W x H) approx. 1737 x 1167 x 1650 mm Additional options (at extra charge): - Raise shredder by approx. 25 cm (for conveyor belt discharge preparation) + €1,980 net - Inclined conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Conveyor and overband magnet control + €2,750 net (start/stop synchronized with shredder) - Alternatively, manual start/stop on the conveyor belt + €595 net Raw material requirements: - Moisture content (atro) must be below 25% - Metals and mineral contamination such as sand, stones, etc. result in increased wear. We are happy to offer a free test with your material at our site in Neckartailfingen. Alternatively, you can ship your material to us and we will document the testing with pictures and videos. --- *Only for brittle plastics with medium hardness. *Not suitable for elastic, extremely hard, or heavy plastics—this would negatively impact the system's durability. --- Optionally, larger machines are available: Base machine: Shredder MGZ 830 K-S – 18.5 kW Cutting chamber opening (top): 800 x 1,000 mm Input material should be max. approx. 720 x 700 mm (height less critical) From €39,995 net *Options upon request Base machine: Shredder MGZ 1030 K-S – 22 kW Cutting chamber opening (top): 1,000 x 1,000 mm Input material should be max. approx. 900 x 700 mm (height less critical) From €49,975 net *Options upon request Base machine: Shredder MGZ 1330 K-S – 37 kW Cutting chamber opening (top): 1,300 x 1,200 mm Input material should be max. approx. 1,200 x 700 mm (height less critical) From €79,975 net *Options upon request

Leto izdelave: 2026, stanje: novo, *Only the neodymium overband magnet is offered, not the conveyor belt underneath. *Neodymium magnets are among the strongest magnets in the world. They have extremely high holding force and cannot be compared to ferrite magnets. Dsdpfx Apodubpuolskl Extremely high separation efficiency, depending on the material height and input material. Probably the most compact overband magnet on the market. Competitors often use the less powerful ferrite magnets to save costs. Approximate dimensions: Length: 104 cm Width: 22 cm Height: 28 cm (at the motor) *Without control system Surcharge for simple manual start/stop control: + €495 A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600 x 68 x 36.5 mm * Over a length of 600 mm, nails are attracted and discharged sideways once outside the magnetic zone. This overband magnet should be installed approx. 7–10 cm above the material flow. *Mounting/suspension to be provided by the customer *depending on the maximum length of the metal pieces. Ideal for separating nails from wood chips. Optionally used in a single-shaft shredder with extraction. Requirements: * Your belt width or effective inner width (of the existing conveyor belt) should ideally be less than 55 cm *Suitable for separating nails from material flows less than 12 mm high, as well as chip lengths less than 25 mm. ----- Optional at extra cost: Cross and incline conveyor demo units from €8,770 net

Stanje: novo, Leto izdelave: 2026, Premer: 160 mm Za doplačilo je možno dobiti tudi v premerih: 180, 200, 250, 300 mm; dodatni premeri na zahtevo. Dksdjchuvropfx Aplol Zelo robustna industrijska izvedba. Idealno za ločevanje žebljev/kovinskih delov iz materialnih tokov. Na primer za uporabo po lesnem drobilniku. Vključno s 3 izjemno zmogljivimi magneti. * Po želji je mogoče vgraditi do največ 6 magnetov v element – doplačilo za vsak dodatni magnet + 49 € - Za doplačilo so na voljo tudi neodim magneti namesto feritnih. Vaše prednosti: + Izjemno velika revizijska vrata s tesnilom za lahko odstranjevanje žebljev + Stabilno hitro zapiranje + Izdelano v Nemčiji Revizijska vrata/odprtina: 35x18 cm Vgradna dolžina je lahko različna

Stanje: novo, Sheet thickness: 6 mm Bending length: 2550 mm Upper roll diameter: 190 mm Pre-bending: 5 mm Dkodoflvl Aspfx Apljl Sheet length: 2550 mm Model MRM-S 3-Roll Motorized Asymmetric Plate Bending Machine Steel-welded frame – Motorized adjustment of the rear roll Options: Hardened rolls: €1,800 Extended roll shafts: €500 Segment rolls: €750 Digital display: €800 All prices excl. VAT.

Stanje: novo, Leto izdelave: 2026, Delivery time: Approx. 4-5 months Your advantages: + Extremely large cutting chamber opening: 1300 x 1200 mm + Special rotor suitable for both hard and soft wood + Energy efficient and powerful with 37 kW start-up output Technical specifications: Color: grey / blue Feed opening on top (mm): 1,300 x 1,200 Hopper volume (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 – 125 Power requirement (kW): 37 Screen perforation (mm): 10 – 40; selectable Tools: 37/70 knives Extraction port diameter (mm): 200 mm Dimensions: 2430 x 2410 x 1735 mm (L x W x H) Approx. weight (kg): 3,500 Options available at extra cost: - Second row of knives, for up to 30% higher throughput Dkodpfx Ajgbkkrjplel - High-speed hydraulics, for increased throughput - Conveyor belt discharge preparation - Conveyor belt - Overband magnet HAWK-EYE *To shred veneer or paper (materials thinner than 3 mm) we recommend a segmented floor. Special option available at extra cost. --- Slider extension option *available at extra cost Maximum pallet size up to 1200/1400 mm possible (with the slider extension option, the cutting chamber opening on the top is 1300 x 1700 mm; surcharge +14,975) *significantly longer production time required. *Larger machines available upon request. --- Raw material requirements: - Moisture content (oven-dry) must be below 20% - The feed material must be free of metals and mineral impurities. Otherwise, tool damage and/or increased wear may occur.

Stanje: zelo dobro (rabljeno), • Proizvajalec: ABUS KG – Nemčija • Tip: K-300 1-4 • Moč motorja: 3,8 kW • Napajanje: 400 V / 50 Hz • Opremljen z elektromagnetno zavoro – zavorni moment 90 Nm • Zobati gred – premer cca 34 mm • Pritrditev: kvadratni prirobnik • Robustna industrijska zasnova, namenjena delu v ABUS mostnih žerjavih in vitlih • Stanje: rabljen, delujoč (prave slike) Dsdjxbfutspfx Aplskl

Stanje: novo, Leto izdelave: 2025, Še en stroj na voljo takoj! Dkjdpfx Aov Rpxlsplsl Briketirka s krmilnikom PLC in avtomatiko za dolžino briketa Zmogljivost: do največ 60 kg/h Briket: 50 mm valjaste oblike Motor: 5,5 kW Dimenzije: 1.900 x 1.350 x 1.410 mm Teža: pribl. 860 kg. Zahteve: Izhodni material idealno krajši od 25 mm dolžine ostružkov Vsebnost vlage 6–12 % ATRO Stroj je primeren za občasno delovanje. Npr. do 2,5 ure briketiranja, 1 ura premora itd. Če naj stroj deluje neprekinjeno več kot 2,5 ure, je treba priključiti opcijsko hlajenje.

Stanje: kot nova (razstavni stroj), Demonstration unit with 7 operating hours Another machine available immediately (ex works Neckartailfingen) Shredder MRZ 830 Commodity code: 84659600 Feed opening: 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase Knives: multi-turnable Hydraulically actuated pusher Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (LxWxH) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard features included: - automatic star/delta start-up - fast hydraulic system - automatic shut-off during rotor idle - Rotation speed 70-90 rpm for high throughput - Intermittent control to avoid idle times - Performance-enhancing step control for the hydraulic pusher Dodpov Sqrpjfx Aplokl - Pertinax guides for the hydraulic pusher - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding untreated wood, chipboard and MDF panels; other materials possible after testing and approval by the manufacturer . Included: - Shredder raised by 30 cm (prepared for conveyor belt) Additional shredder options: - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm +/- 100 mm - Overband magnet + €6,780 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronised with the shredder) . Raw material requirements: - Moisture content (absolutely dry) must be below 30% - Metals and mineral impurities such as sand, stones, etc. lead to increased wear

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Special price: €29,970 net One machine is currently available for immediate delivery. The ideal solution for shredding bulky, lightweight aluminum chips or turnings. Not suitable for larger, solid aluminum parts. Included features: + Optimized cutter geometry Dsdsgmh H Tjpfx Aplskl + Customized pusher control + Load-dependent hydraulically controlled pusher (presses the chips against the cutting unit) Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Knives: 40x40 mm, multiple rotatable Rotor diameter: 260 mm Control: Omron PLC Cutting unit opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (15 - 40 mm) Extraction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at an extra charge: - Raise shredder by 30 cm (preparation for conveyor belt): +€2,990 net - Angled conveyor belt (discharge height approx. 220 cm): +€9,770 net - Overband magnet: +€6,980 net - Conveyor belt and overband magnet control: +€2,750 net (Start and stop synchronized with the shredder) We are happy to offer a free test using your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us via a freight forwarder, and we will document the test with photos and videos.

Stanje: dober (rabljeno), Used, good condition. Technically inspected second-hand machine Base machine starting from: €139,750 net *Options available at extra cost, see below Delivery time approx. 16 weeks after order Briquetting press, e.g. for wood dust, spelt husks, enrichment material (such as toys and chewing material for pigs), animal feed, alfalfa, or wood shavings. *Optionally, short briquette tablets can be produced Technical data: Throughput capacity up to max. 750 kg/h (depending on material) (e.g., sawdust with a bulk density of 250 kg/m³) Accurate statements on throughput are only possible after testing with your material. Actual output may vary significantly depending on the bulk density of the starting material. Customs tariff number: 84793010 Briquette Ø 65 mm Including 2 m press channel Main motor power: 37 kW Feed screw geared motor: 2.2 kW Compression screw: 5.5 kW Hydraulic pump motor: 0.37 kW Total connected load: approx. 47 kW Control panel with plain text display for operating status and load display for main drive and feed screws PLC control with hour counter in the switch cabinet Machine has CE marking Automatic start-stop function Dimensions 3100x860x1800 mm (LxWxH) Weight: 3800 kg Optional extras at additional cost: Temperature control unit for press tools To maintain temperature for optimum briquette quality. Includes temperature controller for pump, cooling unit, fan, pressure switch. Pre-wired, ready to connect – mandatory for operation Including corresponding control system + €7,850 net Guillotine or tablet breaker For cutting briquettes + €6,900 net Compressed air connection required! Silo for MAP series + €19,940 net - Storage silo above the machine - Capacity approx. 6 m³, robust steel construction with agitator discharge and level sensor. Conveyor line/cooling section (nominal: 4x2m) Each 2 meters €990 net Installation/commissioning (estimated 2-3 days onsite) Billed based on effort and separate calculation. The following rates apply: Service technician/mechatronics per assembly and travel hour: €129.00 Overtime: 25% surcharge Each Saturday/night hour: 50% surcharge Each Sunday/holiday hour: 100% surcharge Daily allowance per technician: depending on country Per car/van and travel kilometer: €0.98/km Travel and accommodation charged to client according to receipts or via flat rate. Test run with customer-specific material: (by arrangement, up to a maximum of 750 kg) – €1,970 net flat rate Raw material requirements: - Moisture content (atro) must be between a minimum of 6% and maximum of 15% - Chip length maximum 18 mm - Installation temperature: heated room at minimum +5°C Dksdpfofmqq Esx Apljl - Feed material must be free from metals and mineral contamination. Damage to the press tools and/or increased wear may result

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Ideal for shredding polystyrene (EPS) or similar materials. Throughput is highly dependent on screen and input material: - Up to 60 kg/h with EPS using a 15 mm screen *The coarser the screen, the higher the throughput. Dedpfxoh S H T Ue Aplskl Motor: 9.2 / 11 kW, 400 Volt Robust steel construction Hardened cutting blades Screen with interchangeable inserts, optionally available in (8), (10), 15, 22, 26, 30, 40, or 60 mm perforations With electric drive: star-delta switch, overload protection, and 8 m power cable – plug-ready Blow-out nozzle 150 mm, optional for plastic or grain pipes Blowing range approx. 12 m Chassis with 2 running wheels (Ø 380 mm) and one swiveling support wheel (Ø 125 mm), all wheels with solid rubber tires Dimensions (LxWxH): approx. 1200 x 900 x 1270/1400 mm Weight: approx. 240 kg Spare parts and options: 24 hardened blades, each €9.90 (net) 6 bolts, each €14.90 (net) 1 screen €475 (net) Cover €290 (net)

Stanje: dober (rabljeno), Clean air extraction Used machine, good condition Pictures to follow Mobile Jet 160 Dsdpfsrb D Nsx Aplekl Connection: 160 mm Fan: 2.2 kW Airflow: 1,850 m³/h / 400 V

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, The ideal machine for shredding cables including optimized cutting geometry approx. 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Blades: 14 pieces, 40x40mm, multiple edges (reversible), Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume: approx. 0.6 m³, Hydraulically operated pusher Screen perforation as required (15 - 40mm) Dkedpfxsgmfa Aj Apljl Extraction nozzle Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double blade row + €995 net (28 instead of 14) - Extra charge for 4-sided segmented floor + €3,750 net (prevents pusher from jamming. Recommended for shredding plastics, paper, veneers with thickness less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angle conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with shredder) Bea9ia3l27 Raw material requirements: - Mineral contamination such as sand, stones, etc. leads to increased wear. We are happy to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight carrier and we will document the test with photos and videos.

Leto izdelave: 2024, stanje: novo, Overview – The different variants *Not every option is required: Optional: - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demo unit with discharge (only sketched in photo) *optional, if you want to feed with a wheel loader Unit price net from €14,750 – demo unit - De-dusting screw conveyor – length approx. 4m Equipped with 4 screens on the bottom that are extracted/suctioned. Unit price net from: €9,750 - Extraction components/hoses flat rate €945 net - Control for complete installation Unit price net: €2,750 - Demonstration extraction unit MMJET 160, with cleaning Connection 160, Fan 2.2kW Air flow 1850m³/400V automatic compressed air cleaning Unit price net from: €6,950 - Bale press B 400 Bale approx. 400x400x800mm (height adjustable) Dodpfjff Sbijx Aplekl Up to 30 bales per hour with approx. 20kg each from €59,995 net *A reference installation (bale press) is located at ZIP code 64579 Gernsheim Technical Data: Bale size (W x D x H): 400 x 400 x 800mm (height adjustable upon request) Bale weight approx. 20 kg (depending on material) Performance: approx. 30 bales per hour Buffer tank approx. 0.7m³ capacity Min./max. level sensors in the tank Hydraulic pre-compressor Hydraulic pressing ram Hydraulic power unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in press channel for easy bale ejection Dimensions (L x W x H): 3105 x 2830 x 2455 mm Weight approx. 1,500 kg mütek bale presses/packaging machines are designed for the production of bales from a variety of materials such as chopped miscanthus or elephant grass, wood shavings, sawdust and chopped straw. The machines are characterized by a robust design, ensuring consistent quality during continuous operation. The bale press compacts the material loaded into the buffer tank without binder additives by means of hydraulic pressure, and packs the material into plastic bags. The material volume can be greatly reduced with the bale press. The volume reduction ratio depends on the material. The maximum moisture content must not exceed 18% air-dried (ATRO). The buffer tank of the mütek bale press can be loaded automatically or manually and has a volume of approx. 0.7 m³. Tanks with a larger volume or with integrated extraction and filter units as complete disposal systems are also available. Besides automatic loading via dust extractors, mütek also offers loading by screw conveyors. Both variants can be equipped with automatic dedusting. mütek bale presses are equipped with a switch cabinet for control. In the standard version, bale dimensions (W x D x H) are 400 x 400 x 800 mm. Height can be customized upon request. Advantages of producing bales include: - Simple and safe storage - No loose dust - Minimization of storage volume - Reduced transport volume *Raw material requirements: - dry (max. 30% ATRO) - maximum length 35mm

Stanje: novo, Leto izdelave: 2026, Delivery time approx. 3-4 months Shredder MRZ 830 Commodity code: 84659600 Feed opening: 800x1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase Blades: multiple cutting edges (reversible) Dkedpfx Apsd Dgw Uslsl Hydraulically operated pusher Screen perforation size as desired (10–40 mm) Extraction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (LxWxH) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard features included: - Automatic star/delta start - High-speed hydraulics - Automatic shut-off when the rotor runs idle - Rotor speed 70–90 rpm for high throughput - Intermittent control to avoid idle times - Performance-enhancing step control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE conform The shredder is designed for processing solid wood, chipboard, MDF panels, and other materials upon testing and approval by the manufacturer. Additional shredder options: - Height increase by 30 cm (preparation for conveyor belt) + €2,140 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €5,980 net - Controls for conveyor and overband magnet + €2,750 net (Start and stop synchronized with shredder) Raw material requirements: - Moisture content (atro) must be below 30% - Installation temperature: heated room, minimum +5°C - Metals and mineral contaminants such as sand, stones, etc. increase wear

Stanje: novo, številka stroja/vozila: 8e6cf81e11b107f23f22f209a, konfiguracija osi: 3 osi, velikost pnevmatike: 435/50 r19.5, Further Information Fine-grain steel welded construction, with preload light pretensioning in the neck area, fifth wheel plate with interchangeable 2" kingpin, outer frame slightly angled new version with load-lock profile for lashing strap attachment, 24-ton 2-speed landing gear, single-sided operation, with straight lower section, without sliding compensation. Note: Free landing leg corner dimension or free rear swing radius approx. 1930 mm, extending ladder at rear, door holders on the side, 2 wheel chocks with holders, side underrun protection in aluminum, underrun guard in galvanized steel, quarter shell mudguards in front of the first axle and behind each axle, with anti-spray flaps as per EC regulations, rear impact protection. SAF disc brake axles, axles/chassis laser-aligned to reduce tire wear and fuel consumption, air suspension. 2-line compressed air brake system, color-coded line routing for easy maintenance. Spring-actuated parking brake, 2 mistakable-proof coupling heads at front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raise & lower valve, vehicle stability control system. 435/50 R19.5 tires, brand as chosen by manufacturer, steel rims, factory silver. 24 Volt, multi-chamber lights, side yellow LED lighting, 2 white position lights at front, 2 white/red side marker lights at rear, 2 x 7-pin mistakable-proof sockets at front, without connecting cable. Floor: Phenolic plywood panels approx. 30 mm thick, laid on longitudinal crossmembers for high point load capacity, suitable for forklift axle loads up to max. 7100 kg. Front wall / front corner posts: 2,580 mm high, corner posts in steel, high-volume design, quick-release system for side curtain at front wall, crash blocker, interior lower ram protection in steel approx. 140 mm high. Center posts: 3 pairs of sliding posts movable along the entire length, with 4 stake pockets each and long pocket below, 3 pairs of post positions. Insert slats: 5 rows of wooden slats. Rear wall / rear corner posts: Rear corner posts in steel up to lower roof edge, curtain mounting with round tube and curtain tensioner ratchet, rear portal doors, double-wing, each with 2 internal locking bars. Dsdpfx Apei Ri E Helokl Tarpaulin: Tarpaulin with welded-in horizontal and vertical straps, tension locks in stainless steel. Roof: Sliding roof, rear end lift foldable upwards, roof can be slid from rear to front, L-profile roof beam for automotive industry, interior width between roof beams approx. 2,490 mm, tarpaulin color: white, 400 roof non-elastic, minimal roof beam deflection during loading and unloading, optimal rain gutter at rear, top of the end bow above the doors, EcoLift – lifting roof can be raised by approx. 380 mm, with gas strut assistance, 3 driving positions at front: internal height at front approx. 2,900 mm / 2,950 mm / 3,000 mm, set to approx. 3,000 mm. Germany, type approval as per EC 2007/46, 24/7 service hotline, Fliegl manufacturer's certificate for body strength as per EN 12642 XL, prepared for single-line license plate holder, warning sign as per ECE-70, reflective tape: white, continuous at the lower edge of the side curtain and at the top corners (if visible sideboards, stripe at the bottom of sideboards), reflective tape: red, all around the rear portal. Frame DB 7350 Nova grey, 10-year anti-corrosion warranty, land

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902028370, lastna masa: 6.015 kg, največja dovoljena obremenitev: 28.985 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 04/2021, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.030 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R19,5", barva: črn, Leto izdelave: 2021, Oprema: EBS (Elektronski zavorni sistem), Chassis semi-trailer for freight forwarding Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame slightly tapered with "Load-Lock profile" for lashing strap hooks, if present on the frame Note: To hook in straps in conjunction with sideboards, the sideboards must be opened! 24 t, two-speed landing gear, single-sided operation, with straight lower section, without compensating support Note: Free landing leg base dimension or free rear swing radius approx. 1930 mm, without supports, rear extending ladder, side-mounted door holders 2x wheel chocks with holders Aluminum side underrun protection Galvanized steel rear underrun protection Quarter shell mudguards in front of the 1st axle and behind each axle With anti-spray mudflaps behind each axle Rear impact guard, double-sided pallet limit (approx. 15–20 mm high), bolted design, loading height reduced by approx. 15–20 mm Plastic toolbox with drawer and storage shelf, w=650 / h=520 / d=670 mm, lockable with padlock (padlock not included) Axles & suspension SAF disc brake axles "Axle/chassis laser alignment" reduces tire wear and fuel consumption, air suspension, without lift axle Braking system 2-line compressed air braking system, color-coded piping for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, no connection cable included Attention: The trailer may only be towed by tractor units that ensure effective ABS operation! With lift & lower valve Vehicle stability control system Wheels and tires 435/50 R19.5", brand at manufacturer’s discretion, alternative 385/55 R19.5 Steel rims, factory silver Electrics 24 volt, multi-chamber lights, lateral yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, no connection cables included Floor Approx. 30 mm thick phenolic birch plywood, on longitudinal crossbeams for high point-load capacity, forklift axle load up to max. 7100 kg Bodywork Bodywork mounted Front wall / front corner posts 2,580 mm high, volume-design steel corner posts, release device for side curtain at front wall "Crash-blocker", internal lower protection at approx. 140 mm height with steel impact guard Center posts 3 pairs of sliding posts, adjustable over the entire length, with 4-position sockets and a long lower pocket 3 pairs of post positions Dodpfx Asx Sqmrjplskl Insert slats 5 rows of wooden insert slats Rear wall / rear corner posts Rear corner posts in steel up to the lower roof edge, curtain mounting with round tube and curtain tensioning ratchet Double-wing rear portal doors, each with 2 internal locking bar closures Tarpaulin Tarpaulin with welded horizontal and vertical straps Tension locks made of stainless steel Roof Sliding roof, end lift foldable at the rear, roof can be slid from rear to front, L-roof beam for automotive industry, internal width between roof beams approx. 2,490 mm, tarpaulin color: white Non-elastic roof, minimal deflection of roof beam during loading and unloading EcoLift lifting roof, height adjustable by approx. 380 mm on both sides with gas strut support, three driving positions at front: internal height at front approx. 2900 mm / 2950 mm / 3000 mm, set to approx. 3000 mm Optimized rain gutter at rear, on top of rear crossmember, above the doors

Stanje: pripravljen za uporabo (rabljen), Baumüller BUC2-90/90-62-101-01 Servo Drive Good condition, tested Storage marks, warehouse discovery as shown in pictures For further technical information, please refer to the images. Scope of delivery as pictured Auction price includes 19% VAT and invoice Shipping or collection by arrangement Dkedpfx Apstrk Sholjl Express shipping also possible worldwide. No warranty / guarantee Due to the new warranty law, we are obliged to inform you of the following: Even if the item is new or used, we sell it as a spare part without warranty, as we often deal in used goods obtained from dismantling or insolvency, making it impossible for us to offer a warranty within the legal framework. Trading between businesses is an option to exclude the legally required warranty or guarantee. If you have any questions, feel free to contact us. No. B6490

Stanje: dober (rabljeno), Your contacts in our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering you a used load distributor from the manufacturer Dexion for sale. These can also be used for other manufacturers. The load distributors are suitable for a rack depth of 800 mm. Scope of delivery includes: 01x load distributor, used Material finish: fully galvanized Total length: approx. 980 mm C-profile dimensions: approx. 185 x 35 mm Opening for rack feet: approx. 115 mm Weight per piece: approx. 10.074 kg For distributing bay loads over a larger surface area. Our service overview: (prices on request) Assembly, installation Please note our general assembly conditions. Rack inspection Racking inspection according to DIN EN 15635 performed as per BGR 234 visual inspection requirements for all racking systems Dsdpjdvad Eofx Aplokl Delivery with our own vehicle fleet (unloading not included)

Stanje: dober (rabljeno), Tehnični podatki za paletno regalno prečko: Regalni sistem: Dexion (Hovik) Tip: P 90 V obsegu dobave: 01x paletna prečka, rabljena Barva materiala: bela I-profil: 100 x 50 mm Viseča kljuka: 5 HK Prosta širina: 1.800 mm Dodpfx Aow R N Hysplskl 02x varnostni zatič, rabljen Izvedba: sendzimir pocinkano Za varovanje vzdolžnih nosilcev Vaši kontakti v našem podjetju: G.: Andre Evering G.: Mario Klöver G.: Falk Deutsch Splošne informacije o artiklu: Ta artikel je na voljo le za osebni prevzem. Če želite prevoz ali pošiljanje tega izdelka, to pomeni dodatne stroške, ki jih je mogoče posebej preveriti pri nas glede na kraj dostave oziroma obseg dobave.

Stanje: dober (rabljeno), Technical data for pallet racking beam: Racking system: Polypal Type: Stockpal Scope of delivery includes: 01x Pallet racking beam, used Colour: orange Box profile: 90 x 50 mm Type: SKVBN 09050CP22 Connector: 2 hooks Design: Head beam Clear span: 1,850 mm 02x Safety pins, used Finish: fully galvanized For securing the cross beams To prevent unintentional lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Dodpfx Aswlm Nveplskl General information about the item: This item is only offered for collection. If transport or shipping is required, additional costs will apply. These can be inquired with us separately depending on the place of delivery and scope of delivery.