Mütek Mpp Nem 90 nakup rabljenega (11.829)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2023, All wear parts new only 704 operating hours Special price for lightly used demonstration machine Base machine: €29,990 net Options at extra cost: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust design that ensures consistent briquette quality during continuous operation. The compaction process is carried out without the addition of binding agents, relying solely on hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. Throughput capacity: up to max. 70 kg/h (material-dependent), Briquette diameter: Ø 50 mm, Motor: 5.5 kW, 400 Volt / 50 Hz / 3 phase, Pump: 40 litres Max. briquette length: 50 mm, Optimal briquette length: 40 mm, Silo diameter: 1,000 mm, Oil tank: 110 litres Dimensions: 1750 x 1130 x 1100 mm (L x W x H) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Hedpfx Aod N Dnhjgxsl Vertical cylinder Fill level sensor: yes Requirements for the input material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Max. weight on agitator: 150 kg - The feed material must be free from ferrous metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result

Stanje: novo, Leto izdelave: 2026, * Optional features available at extra cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterized by their robust construction, ensuring consistent briquette quality during continuous operation. The compaction process takes place without the addition of binding agents—solely via hydraulic pressing force. Depending on the material, the input material volume can be reduced by up to 90%. The standard silo holds approx. 0.5 m³, but larger silos or special containers for installation below an existing extraction and filter system as a complete disposal unit are also available. Depending on customer requirements, MPP NEM individual machines can be combined into a complete system. The chip hopper of the press can be loaded manually, via conveyor belt, via dust extractor, or with a tilting container trolley. For systems intended for fully automatic operation, the use of a lift-and-tilt device, in conjunction with a shredder, is recommended. The MPP NEM briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm, and the diameter varies by type (50, 65, or 70 mm). To recover emulsions, the briquetting press can be equipped with a drip tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the briquetting press's feed hopper. An agitator is built into the bottom of the hopper to prevent bridging and feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compacts the material and pushes it into the press block. The main press cylinder then compresses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder subsequently lifts, and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the briquette lengths. Advantages of briquette production include: - Volume reduction by up to 90% - Emulsion recovery - Cost savings on storage and transport - Economical disposal - Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to 350 kg/h max (material-dependent; chip length less than 10 mm) Last test with aluminum chips < 18 mm: approx. 260 kg/h *More details available after a free test with your material. Hjdpfx Aegfm Rysgxol Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Total connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 litres Dimensions (LxWxH): 2500 x 1700 x 1730 mm Weight: 2250 kg Hydraulic pre-compaction via ram Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Stanje: novo, Leto izdelave: 2026, Our best-selling briquetting press – the classic choice. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Outstanding price-performance ratio Optional extras (available at additional cost): *Surcharge for fill level sensor, enabling automatic operation: + €995 net *Surcharge for large pre-compression chamber + €970 (Recommended for very light materials such as straw, increases machine width by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material dependent): up to 60 kg/h* *Depending on bulk density Hsdpfxegl Nlms Agxel *Based on a bulk density of 200 kg/m³ Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump output: 37 liters Hydraulic pre-compressor Press tongs cooling option: No Hydraulic oil cooling option: Yes Fill level monitoring option: Yes CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and max. 18% - Maximum chip length 15 mm - Installation temperature: Tempered room, at least +5°C - Customer must provide protection against hydraulic oil loss - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Stanje: novo, Leto izdelave: 2026, Availability upon request Very robust machine with high pressing force - also suitable for producing marketable briquette quality *depending on material. This is made possible by the large-dimensioned press cylinder and the 70 mm briquette size. Our best-selling briquetting press series + Proven, simple technology, ensuring extremely low susceptibility to failure + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent value for money Optional demonstration cooling unit surcharge: + €4,980 net (can also be retrofitted later) * Cools the press clamp (important from 4 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation exceeding 4 hours continuously Commodity code: 84793010 Briquette diameter: 70 mm Front sleeve: 125 mm Max. briquetting stroke: 100 mm Hodpfxod Nm Sis Agxjl Optimal briquetting stroke: 80 mm Capacity (material-dependent): up to 150 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor output: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2,095 mm Width: 1,300 mm *with large chamber 1,600 mm Height: 1,700 mm Weight: 1,250 kg Oil volume: 220 liters Silo diameter: 1,200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Hydraulic pre-compressor Press clamp cooling option: yes, with optional coolable press clamp Hydraulic oil cooling option: yes Cooling of press clamp and hydraulic oil possible with optional cooling unit Level monitoring option: yes Continuous strand briquette option: yes (material-dependent) Enlarged filling slider option: yes, with optional enlarged filling slider CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: heated room with at least +5°C - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Special price for trade fair demonstration unit *Available upon request New: With the frequency inverter option, eligible for up to a maximum of 45% government funding Combination of: Hjdpjd Su Hxofx Agxol mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *Both individual machines are fully produced and in stock; only need to be connected together 1. Technical Data – Briquetting Press: Our best-selling briquetting press – the classic model. + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Customs tariff number: 84793010 Briquette diameter: 50 mm Front sleeve: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput capacity (material-dependent): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW, 400 Volt / 50 Hz / 3-phase Total system footprint: 2.2 x 1.1 x 2.8 m (LxWxH) Height: 2.8 m (special container) Delivery also possible in 2 components Weight: approx. 1200 kg Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compressor Option - press plier cooling: no Option - hydraulic oil cooling: yes Option - level monitoring: yes CE compliant 2. Technical Data – Clean Air Extraction Unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when facing the dust bin) Residual dust content:

Stanje: novo, Leto izdelave: 2026, Production time for the machine approx. 3.5 months Very robust machine with high pressing force - Also suitable for already producing a saleable briquette quality, depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development and expertise + Several thousand machines in use with satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + €3,995 net (can also be retrofitted) * cools the pressing tongs (important from 3.5 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a stretch. Large pre-compactor chamber + €1,975 net Recommended for lightweight input materials such as planing shavings Customs tariff number: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (depending on material): up to 110 kg/h* Last test: approx. 87 kg/h Hsdpfx Agsffh Atsxol *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter . Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,925 mm Width: 1,100 mm Height: 1,500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compactor Press tong cooling option: yes, with special accessory of coolable press tongs Cooling of the press tongs via a water tank (must be supplied by the customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes Continuous briquette option: yes (material-dependent) CE compliant . Requirements for the raw material: - The moisture content (oven dry basis) must be at least 6% and no more than 18% - Maximum chip length: 15 mm - Installation temperature: heated room of at least +5°C - The feed material must be free of metal and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result

Stanje: novo, Leto izdelave: 2026, * Production time approx. 4-5 months Hodjchqxxopfx Agxel --- Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continual development, and expertise + Several hundred machines in operation with satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality during continuous operation. The pressing process is performed without the addition of binding agents, using only hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers designed for integration under existing extraction and filtration systems for complete disposal units are also available. Depending on customer requirements, individual MPP NEM units can be combined into a system. The press’s chip hopper can be loaded manually, via conveyor belt, with a dust extractor, or by a tipping container cart. For fully automated system operation, the use of a lift-and-tip device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on the model, 40 to 75 mm; the diameter is, depending on the type, 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing cooling, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage hopper of the briquetting press. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main press cylinder presses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves upward, ejecting the stable briquette. Advantages of briquette production include: • Volume reduction of up to 90% • Emulsion recovery • Cost savings in storage and transport • Cost-effective disposal • Profitable sale -- Briquetting Press NEM 300 Throughput approx. up to 200 kg per hour (highly depending on material). - In the last test with aluminum granulate under 5 mm: approx. 186 kg per hour + recovered emulsion. - In the last test with aluminum chips under 18 mm: approx. 120 kg per hour + recovered emulsion. Technical specifications: Motor: 7.5 kW (+ 0.55 kW on the cooler) 400 Volt / 50 Hz / 3-phase Front bushing: 125 mm Max. briquette stroke: 100 mm Optimal briquette stroke: 80 mm Pump: 80 liters Storage hopper approx. 0.5 m³ capacity (extendable)

Stanje: rabljeno, Center bearing for screw conveyor, transport screw, screw conveyor system, conveying technology, tubular screw conveyor, drying screw, cooling screw, cooling tube screw, heating screw, heating tube screw, screw heat exchanger, center bearing design - Center bearing: for Ø 90 mm shaft - Material: gunmetal (red brass) - Quantity: 2 bearings available Hjdpfx Ajcgdr Rsgxsl - Price: per piece - Dimensions: 130/130/H160 mm - Weight: 4.7 kg/piece

Leto izdelave: 2018, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, plasma plasTemp Primus 90 Temperature Control Unit Stock No.: 503642 Machine/Device Type: Temperature Control Unit Manufacturer: plasma Model: plasTemp Primus 90 Year of Manufacture: 2018 Technical Data plasTemp Temperature Control Unit Primus 90 / Compact TK-90-9-50 - Circulating medium: water up to 90°C - Max. external volume at 90°C: 50 liters - Heating capacity: 9.0 kW - via two stainless steel tubular heaters made from highly corrosion-resistant Incolloy - Cooling capacity: 70 kW with a temperature differential between mold supply and cooling water of 80 K; pressure differential in the cooling water circuit at least 3 bar - Pump: bronze submersible pump with Qmax = 40 l/min, Pmax = 3.8 bar - Motor power: 0.5 kW - Equipment: • Microprocessor controller, self-optimizing SBC - with digital display of target and actual preheating temperature • Maximum temperature monitoring • Automatic filling with level monitoring • Output socket for collective fault reporting • Acoustic alarm for warnings • Operating hours counter • Heating control via Solid State Relay (SSR) • Leakage monitoring • Leak stop operation (suction mode) • Suction for mold change • Manual filling • Dirt filter • Device mounted on rubberized casters • Connections: mold hose nozzle G 1/2" (14 mm), cooling water hose nozzle G 3/8" (14 mm) • Electrical connection: CEE plug 16A • Dimensions: L=0.73m, W=0.27m, H=0.58m • Weight: 50 kg Hjdpfxox A Swdo Agxjl Maximum operating temperature: 90°C Heating capacity: 9 kW Circulating medium: water

Leto izdelave: 2018, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Temperature control unit plasma plasTemp Primus 90 Stock no.: 503644 Hsdpfxoxt Rdds Agxol Machine/device type: Temperature control unit Manufacturer: plasma Model: plasTemp Primus 90 Year of manufacture: 2018 Technical data plasTemp Temperature Control Unit Primus 90 / Compact TK-90-9-50 - Circulating medium: Water, up to 90°C - Max. external volume at 90°C: 50 liters - Heating capacity: 9.0 kW (via two stainless steel tubular heaters made of highly corrosion-resistant Incolloy) - Cooling capacity: 70 kW at a temperature difference between the mold supply and cooling water of 80K (minimum pressure difference in cooling water circuit: 3 bar) - Pump: Bronze immersion pump with Qmax = 40 l/min, Pmax = 3.8 bar - Motor output: 0.5 kW - Features: • Self-optimizing SBC microprocessor controller • Digital display of setpoint and actual values for supply temperature • Maximum temperature monitoring • Automatic filling with level monitoring • Output socket for collective fault signal • Acoustic alarm signal • Operating hours counter • Heating control via Solid State Relay (SSR) • Leak monitoring • Leak-stop operation (suction mode) • Draining for mold change • Manual filling • Dirt filter • Unit mounted on rubberized rollers • Connections: Mold hose connector G 1/2" (14 mm), Cooling water hose connector G 3/8" (14 mm) • Electrical connection: CEE plug 16A • Dimensions: L=0.73 m, W=0.27 m, H=0.58 m • Weight: 50 kg Maximum operating temperature: 90 °C Heating capacity: 9 kW Circulating medium: Water

Leto izdelave: 2018, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, PlasTemp Primus 90 Temperature Control Unit Stock No.: 503643 Machine/Device Type: Temperature Control Unit Manufacturer: Plasma Model: plasTemp Primus 90 Year of Manufacture: 2018 Technical Data plasTemp Temperature Control Unit Primus 90 / Compact TK-90-9-50 Hedpfx Agsxt Rc Hsxjl - Circulating medium: water up to 90°C - Maximum external volume at 90°C – 50 liters - Heating power: 9.0 kW – via two stainless steel tubular heaters – made of high corrosion-resistant Incolloy - Cooling capacity: 70 kW with a temperature difference between mold supply and cooling water of 80 K – Minimum pressure difference in the cooling water circuit: 3 bar - Pump: bronze submersible pump with Qmax = 40 l/min, Pmax = 3.8 bar - Motor power: 0.5 kW - Equipment features: • Microprocessor controller, self-optimizing (SBC) • Digital display of setpoint and actual temperature (supply temperature) • Maximum temperature monitoring • Automatic filling with level monitoring • Output socket for collective fault signal • Acoustic alarm signal • Operating hours counter • Heating control via solid state relays (SSR) • Leakage monitoring • Leak-stop operation (suction mode) • Draining for mold change • Manual filling • Dirt filter • Device mounted on rubberized castors • Connections: Mold hose nozzle G 1/2" (14 mm), Cooling water hose nozzle G 3/8" (14 mm) • Electrical connection: CEE plug 16A • Dimensions: L = 0.73 m, W = 0.27 m, H = 0.58 m • Weight: 50 kg Maximum operating temperature: 90°C Heating capacity: 9 kW Circulating medium: water

Stanje: novo, Leto izdelave: 2025, Laser power: 6000 watts Round tube: 20 - 350 mm Square tube: 20 x 20 - 350 x 350 mm Rectangular tube: 20 x 20 - 350 x 350 mm Max. positioning accuracy X, Y axis: 0.05/1000 mm Max. positioning accuracy U axis: 0.05/1000 mm Max. mild steel: 14 mm Max. stainless steel: 10 mm Max. aluminium: 10 mm Max. tube weight: 1200 kg Length: 17,296 mm Width: 4,271 mm Height: 2,933 mm Standard equipment Working range for tube diameter Round tube: 20 mm - 350 mm Square tube: 20 - 350 mm Rectangular tube: 20 x 20 mm - 350 x 350 mm Minimum clamping tube thickness: ≥1 mm Y-axis travel: 9100 mm Z-axis travel: 4000 mm X-axis travel: 400 mm Maximum loading length: 9200 mm Maximum unloading length: 6000 mm Hsdpfx Aoxgc Arjgxjl X,Y axis positioning accuracy: +/-0.05 mm/1000 mm X,Y axis repeat positioning accuracy: +/-0.05 mm/1000 mm Maximum rotational U-axis positioning speed: 100 RPM Maximum acceleration X/Y axis: 1.0 G X-axis rapid traverse speed: ≤50 m/min Maximum loading capacity per tube: ≤133 kg/m Machine operating temperature: 20℃–40℃

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Opis sledi Hedpfx Agexzk Ncjxol

Stanje: dober (rabljeno), Leto izdelave: 1999, Nema NCG 4390 S temperaturni šok komora -40°C do +180°C Proizvajalec: Nema Tip: NCG 4390 S Temperaturno območje: -40°C do +180°C Območje rosišča: +5 °C do +89 °C Omrežna napetost: 400 V Nazivni tok: 32 A Nazivna moč: 15 kW Hladilno sredstvo: R 404 A Letnik: 1999 Teža: 2720 kg Zunanje dimenzije: Š 3950 x G 1700 x V 2280 mm Komora: Š 3000 x G 1300 x V 1170 mm Hedsuzgt Eopfx Agxjl WLG DAMPF-O-MAT Avtomatski električni parni zračni vlažilec in generator pare brez mineralov in vonja Proizvajalec: WLG DAMPF-O-MAT Tip: EDB 8 Grelnik napetost: 400 V Moč: 6 kW Količina pare: 8 kg/h Vodno hlajeni kondenzator Proizvajalec: Bitzer Vodno hlajen Omrežna napetost: 400 V Nazivni tok: 13 A Nazivna moč: 4 kW Hladilno sredstvo: R 404 A Teža: 145 kg KK-08 Možno je financiranje prek naše banke. komplett-konzept.leasingo.de Dodatni artikli - novi in rabljeni - so na voljo v naši trgovini! Stroški mednarodne dostave na zahtevo!

Stanje: rabljeno, Plinska sušilnica z jeklenim trakom. Dolžina naprave: 8 metrov. Hedpjxu U S Uefx Agxol

Leto izdelave: 2025, stanje: novo, Granulator MVZ 7.5 kW Demo machine available at a special price Our Granulator MVZ 7.5 is suitable for shredding thin-walled plastic parts or for secondary size reduction of wood chips. Further details after a test with your material. Our granulators are used for the size reduction of numerous materials, such as plastics or wood. Shredders and granulators are suitable for a wide range of size reduction tasks. For example, in injection molding, defective parts and sprues are produced that need to be reintroduced into the process. At the blow molding machine, in addition to rejects, waste such as parisons or startup scrap are present. Materials that can be processed include blow-molded materials such as PET bottles, PE/PP bottles, canisters, buckets, and pipes. Material is fed from above into the cutter mill’s feed hopper. Inside, the rotor is equipped with cutting knives. Material is shredded between the rotating knives and the stationary knives in the grinding chamber until it passes through the screen underneath the rotor as defined regrind. *Option: Material is usually transported pneumatically afterward into Big Bags, silos, or other containers. The price applies only to the size reduction unit as shown in picture 1. - Fan, cyclone, and filter are available as options. --- Technical Data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger units available on request (4 to 75 kW) Throughput up to 120 kg/h when shredding plastics (highly dependent on screen size and material) Application example: Shredding PE 1000 plastic Input material: approx. 40 mm chip length Secondary shredding down to approx. 6 mm Throughput up to 50 kg/h with a 6 mm screen (Throughput up to 80 kg/h with an 8 mm screen) Hsdpfxod N Dn De Agxol In the case of type G 30 wood chip re-shredding, significantly higher throughputs can be achieved. Up to max. 400 kg/h with a 10 mm screen* when fed metered, e.g., by conveyor belt or screw Details after testing with approx. 30 kg material Rotor diameter: 180 mm 6 rotor knives, each 225 mm 4 stator knives, each 225 mm Dimensions: 930 x 730 x 1420 mm Weight: 450 kg Extraction port: 100 mm Screens: 6, 8, and 15 mm – Further sizes available on request Price per screen: €390 Price for a set of replacement knives: €679 Suitable for, e.g.: - All types of plastic waste Various materials – HDPE, LDPE, PP, PS, PC, PA - Biomass - Wood - Herbs Etc. Parts from injection molding, blow molding, molding scrap, small bottles, cables, small pipes, profiles, etc. --- Larger systems also available as options: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *dependent on screen and material Opening: 620 x 400 mm *optionally with suitable extraction/conveying system Granulator MVZ / 30 kW Throughput up to 400 kg/h *dependent on screen and material Opening: 620 x 500 mm *optionally with suitable extraction/conveying system --- For machine configuration, please specify: - Length x width x height of input material? - Screen size – to what final size in mm should the material be shredded? - Required throughput per hour in kg? - Wall thickness in mm? - Material description Photos can also be helpful

Stanje: zelo dobro (rabljeno), For sale: professional SOYER BMS 800-90 stud welding machine from a renowned German manufacturer. This device is intended for industrial stud welding using the spitzenzündung (contact ignition) method. Perfect for applications in: - Steel construction - Industrial production - Metalworking and assembly workshops ⚙️ Technical specifications: Manufacturer: Heinz Soyer Bolzenschweißtechnik GmbH Model: BMS 800 Type: BMS 800-90 Year of manufacture: 1991 Power supply: 220 V Frequency: 50–60 Hz Charging voltage: 60–190 V Capacitance: 90,000 µF Max. current: 8 A Protection class: IP21 Made in: Germany (West Germany) 📦 Scope of supply: - Control unit - Welding gun - Power and work cables - Ground clamp 📊 Condition: Used equipment. Shows normal signs of wear from operation. Visual condition as shown in the pictures. Not tested under full load. ✅ Advantages: Hodeyzuc Ajpfx Agxel - Robust industrial design - Proven German technology - Compact and mobile housing - Easy to operate 🚚 Shipping: Courier shipping or personal collection possible. International shipping available.

Stanje: zelo dobro (rabljeno), Kataloška številka 6825 TEHNIČNI PODATKI - Dimenzija dozirnega lijaka d/š: 900x630 mm Hsdjyh H Ugopfx Agxjl - Delovna širina rotorja: 540 mm - Motor: 7,5 kW - Premer sita: 20 mm - Dimenzija noža: 40x40 mm - Število nožev: 15 kosov - Avtomatski povrat - Potisni predal - Dimenzije d/š/v: 2060x980x1580 mm - Teža: 1008 kg PREDNOSTI – Nemška proizvodnja – Ni prebarvan – Zelo dobro stanje – Rabljeni sekalnik Neto cena: 37.900 PLN Neto cena: 9.020 EUR Neto cena izračunana po tečaju 4,2 PLN/EUR (pri večjih nihanjih tečaja se lahko cena spremeni)

Stanje: rabljeno, lastna masa: 5.543 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2015, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.450 mm, prostornina tovornega prostora: 24 m³, velikost pnevmatike: 385/65 R22,5, medosna razdalja: 1.310 mm, barva: srebrn, Oprema: ABS, Kolutna zavora EBS Nosilnost 33.457 kg Zračno-dvižno vzmetenje Dno 5 mm – Stene 4 mm Drsna ponjava Podest Dvižni in spustni mehanizem Hjdpfxoywi D Ho Agxsl SAF osi Alu platišča Zložljiva podvozna zaščita Pridržujemo si pravico do napak

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, skupna masa: 75 kg, Stroj za tampotisk Hedpfxjywx H De Agxel

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, skupna masa: 75 kg, Stroj za tampotisk Hedpfxsywx Dpe Agxjl

Stanje: zelo dobro (rabljeno), 90 linear metres of Stow pallet racking Used equipment, in very good condition, see photos Height: 6 m Depth: 100 cm Beam length: 2.70 m Load capacity per level: 3,000 kg Frames: blue Beams: orange Negotiable price: €9,390-- net ex stock The offer includes: + 33 frames pre-assembled, 12t bay load, depth 100 cm, height 6 m + 192 beams, length 2.7 m, 3,000 kg load capacity per level + 384 safety locks + 132 concrete anchors + Load capacity signs Goods are in stock. Transport and assembly available on request. Inspection possible at any time by prior arrangement. Further information available on request. Constantly over 5,000 linear metres of pallet racking from various manufacturers in stock. (Subject to alterations and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex stock.) Purchase / Sale We are constantly searching for and offering numerous items from a wide range of sectors - Swept-clean business clearances - Business liquidations - Fast - flexible - efficient! Hedpfx Aeiwkn Rsgxsl We also clear and/or dispose of for insolvency administrators. Write to us with a few keywords and we will get back to you immediately. To visit our website, please click on our logo!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, največja hitrost vrtenja: 90 obr/min, Variable-speed electric motor 1.8 kW, 3.2–90 rpm Manufacturer: Getriebebau NORD Hsdpeud H Sdofx Agxjl Model: 32-RV30-90 L/8-2 BRE16 Power: 0.45/1.80 kW Voltage: 230/400 V 50 Hz 0.31 A Speed: 3.2–90 rpm Protection class: IP44 Shaft diameter: 40 mm Weight: 50 kg Gearbox: Manufacturer: Getriebebau NORD Model: 90L/8-2 BRE16 Protection class: IP54

Stanje: novo, Leto izdelave: 2026, Production time approx. +/- 4 months. The ideal machine, for example, for shredding pallets and wood waste. * prepared for extraction, see pictures 4 and 5 without additional accessories such as -exhibited hopper or -conveyor belt cutout Hodpsd Hkqhsfx Agxel Commodity code: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 phase incl. turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3 phase Knives: 76 pieces, reversible multiple times Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control system: Siemens S7-1200 PLC Hopper opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 cbm Hydraulically operated pusher Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (LxWxH) approx. 2765 x 2520 x 1730 mm Turbo coupling Standard equipment includes: - V-rotor for maximum throughput - 2nd row of knives on rotor - Control cabinet with Siemens PLC control system - Automatic star/delta start - Fast hydraulic system - Automatic shutdown when rotor is idling - Rotation speed 70-90 rpm for high throughput - Cycle control to avoid idle time - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration dampening machine feet - CE compliant The shredder is designed for shredding natural wood, chipboard and MDF, other materials upon testing and approval by the manufacturer. Requirements for raw material: - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Special price for our demonstration machine Another unit available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood and pallet offcuts. Pallets must be pre-cut with a jigsaw or chainsaw so that they fit upright into the hopper—see image 2. Ideally, dimensions of approx. 40x20x20 cm allow the wood to lie flat on the ram base, which is the most efficient way for the machine to process it. A hydraulically driven ram at the bottom of the shredder pushes the wood against the rotor, with the pressure adjusted according to load. Material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour (*depending on screen size and material preparation). *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor + Concave blades + Heavy-duty large gearbox + Special load-dependent ram control system Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15 pieces, multiple-use (reversible) Option: Double blade row + €995 net Hjdpfx Ajdwktkogxol Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Fill volume: approx. 0.6 m³ Hydraulically actuated ram Screen perforation as requested (10–30mm) Extraction outlet Ø 160 mm Weight: approx. 1,300 kg (depending on configuration) Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% oven dry Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star-delta starter - High-speed hydraulics - Automatic shut-off in case of rotor idle - 70–90 rpm for high throughput - Cycle control to avoid idle times - Performance-boosting step control of the hydraulic ram - Pertinax guides for hydraulic ram - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Shredder options: - Raise shredder by 30 cm (preparation for conveyor) + €2,080 net - Angled conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €5,980 net - Control for conveyor and overband magnet + €2,750 net (Start/stop synchronized with shredder) - Extended hopper + €940 net - Eco rings: + €1,980 net (recommended for more than 15% hardwood content) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Raw material requirements: - Moisture content (oven dry) must be below 30% - Metal or mineral contaminants such as sand, stones, etc., increase wear.