Briketirna stiskalnica Briketirna stiskalnica za aluminij

mütek MPP NEM 90

All wear parts new
only 704 operating hours

Special price for lightly used demonstration machine
Base machine: €29,990 net

Options at extra cost:
- Cooling unit: €3,995 net
- Emulsion tank: €3,990 net

The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust design that ensures consistent briquette quality during continuous operation. The compaction process is carried out without the addition of binding agents, relying solely on hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%.

Throughput capacity: up to max. 70 kg/h (material-dependent),
Briquette diameter: Ø 50 mm,
Motor: 5.5 kW,
400 Volt / 50 Hz / 3 phase,
Pump: 40 litres

Max. briquette length: 50 mm,
Optimal briquette length: 40 mm,
Silo diameter: 1,000 mm,
Oil tank: 110 litres

Dimensions: 1750 x 1130 x 1100 mm (L x W x H)
Weight: 950 kg
Ppedpfjd N Dnhox Altsw

Hydraulic pre-compaction via slide
Main press cylinder
Vertical cylinder

Fill level sensor: yes

Requirements for the input material
- Max. chip length: 15 mm
- Installation temperature: temperature-controlled room at a minimum of +5°C
- Max. weight on agitator: 150 kg
- The feed material must be free from ferrous metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.