Drobilnik lesa

mütek Systemtechnik MRZ 630

Special price for our demonstration machine
Another unit available immediately (ex works Neckartailfingen)
Approx. 8 operating hours.

Suitable for shredding all types of residual wood and pallet offcuts.

Pallets must be pre-cut with a jigsaw or chainsaw so that they fit upright into the hopper—see image 2. Ideally, dimensions of approx. 40x20x20 cm allow the wood to lie flat on the ram base, which is the most efficient way for the machine to process it.

A hydraulically driven ram at the bottom of the shredder pushes the wood against the rotor, with the pressure adjusted according to load. Material is shredded until it passes through the screen basket.

Throughput up to 200 kg per hour (*depending on screen size and material preparation).

*Discharge conveyor and overband magnet available at additional cost.

+ Powerful 18.5 kW motor
+ Concave blades
+ Heavy-duty large gearbox
+ Special load-dependent ram control system

Commodity code: 84659600
Motor: 18.5 kW; 400 V - 50 Hz - 3 phase
Blades: 15 pieces, multiple-use (reversible)
Option: Double blade row + €995 net

Rotor diameter: 260 mm
Control: Siemens S7-1200 PLC
Cutting chamber opening: 630 x 820 mm
Fill volume: approx. 0.6 m³
Hydraulically actuated ram
Screen perforation as requested (10–30mm)
Extraction outlet Ø 160 mm
Weight: approx. 1,300 kg (depending on configuration)
Dsdpfsdwktkox Aplout
Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm
Moisture content: < 30% oven dry

Standard equipment includes:
- V-rotor for maximum throughput
- Control cabinet with Siemens PLC
- Automatic star-delta starter
- High-speed hydraulics
- Automatic shut-off in case of rotor idle
- 70–90 rpm for high throughput
- Cycle control to avoid idle times
- Performance-boosting step control of the hydraulic ram
- Pertinax guides for hydraulic ram
- Vibration-damping machine feet
- CE compliant
- MADE IN GERMANY

Shredder options:
- Raise shredder by 30 cm (preparation for conveyor) + €2,080 net
- Angled conveyor belt + €8,770 net
Horizontal part: 1200 mm
Inclined part: 2500 mm
Adjustable angle: 0–60 degrees
Discharge height: approx. 2000 mm (+/- 100 mm)
- Overband magnet + €5,980 net
- Control for conveyor and overband magnet + €2,750 net (Start/stop synchronized with shredder)
- Extended hopper + €940 net
- Eco rings: + €1,980 net (recommended for more than 15% hardwood content)
- Special scraper + €990 net (recommended for veneer or paper)
- Double blade row + €995 net

Raw material requirements:
- Moisture content (oven dry) must be below 30%
- Metal or mineral contaminants such as sand, stones, etc., increase wear.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.