Tovarna za drobljenje

mütek MRZ 630 - 18,5 kW

Demonstration machine with approx. 9 operating hours
Another machine available immediately (ex works Neckartailfingen)

*Options available at extra cost – see below

Included:
+ Profile rotor for higher throughput performance

We are happy to offer a free test using your material. For this, I invite you to visit us in Neckartailfingen. Alternatively, you can send your material to us via freight carrier and we will document the test with photos and videos.

Motor: 18.5 kW; 400 V - 50 Hz - 3 ph
Blades: 15 pieces, reversible multiple times,
Optional double blade row + €995 net

Rotor diameter: 260 mm
Control system: Siemens S7-1200 PLC
Cutting chamber opening 630 x 820 mm
Hopper volume approx. 0.6 cbm
Hydraulically operated pusher
Screen perforation of your choice (10–40 mm)
Extraction port Ø 160 mm
Weight approx. 1,300 kg
Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm
Moisture content: < 30% dry basis.

Standard equipment includes:
- V-rotor for maximum throughput
- Control cabinet with Siemens PLC
- Automatic star/delta start
- High-speed hydraulics
- Automatic shut-off when rotor idling
- Rotor speed 70–90 rpm for high throughput
- Timed control to avoid idle times
- Performance-enhancing step control for the hydraulic pusher
- Pertinax guides for hydraulic pusher
- Vibration-damping machine feet
- CE compliant

Optional shredder accessories for extra charge:
Iiedpjb Ny Eysfx Afijg

- Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net
- Eco Rings: + €1,980 net
(recommended for more than 20% hardwood)
- Double blade row + €995 net
- Special scraper + €990 net
(recommended for shredding veneer or paper, or materials less than 3 mm in thickness)
- Angled conveyor belt + €8,770 net
Angle: adjustable 0–60 degrees
Discharge height: approx. 2,000 mm
- Automatic overbelt magnet + €5,980 net
- Alternatively, fixed magnet block over conveyor belt for manual cleaning + €990 net (for low metal content)
- Conveyor and overbelt magnet control + €2,750 net
(Start and stop synchronised with shredder) Alternatively, manual start and stop of belts + €595 net

Raw material requirements:
- The moisture content (dry basis) must be below 30%
- Installation temperature: heated room with at least +5°C
- Metals and mineral contaminants such as sand, stones, etc., cause increased wear

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.