Cevni magnet, separator kovin, magnet

mütek Systemtechnik Hawk-Eye

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, CNC Turning and Milling Center (Multi-Function Machine) | Manufacturer: MAZAK Model: INTEGREX e-650H II | Year of manufacture: 07/2009, Commissioning: November 2009 The machine can be inspected under power by appointment. Condition: Fully functional / ready for operation. Operating hours (as of 10.03.2026): - Total: 91,430 h - Automatic operation: 52,054 h - Automatic machining: 38,974 h - Manual machining: 31,316 h TECHNICAL DATA: Working area: - Max. swing diameter: 920 mm - Max. swing diameter over tool slide: 920 mm - Max. turning diameter: 1,100 mm Main spindle: - Max. speed: 1,600 rpm - Min. speed: 35 rpm - Spindle bore: 260 mm (1,000 rpm) - Spindle nose: A2-11" - Internal spindle bearing diameter: 220 mm - Rated power (30 min. operation / 100% continuous operation): 45.0 / 37.0 kW - Max. torque: 4,500 Nm Programmable tailstock: - Taper: MT 6 Milling spindle: - Turret type: Single spindle with ATC - Tool shank: steep taper 50 - Max. tool diameter: 260 mm - Max. tool length: 500 mm - B-axis indexing increments: 0.0001° - B-axis positioning for turning - Min./max. milling spindle speed: 35 - 10,000 rpm - Milling spindle motor, AC: 37 kW Rodpfxjyuq Dzs Agtet Travel distances: - X-axis: 1,025 mm - Y-axis: 650 mm - Z-axis: 6,423 mm - B-axis swivel range: 240° Dimensions: - Spindle center height: 1,350 mm - Length: 13,267 mm - Width: 3,938 mm - Height: 3,920 mm - Weight: 41 t Additional Information: - Rated power (100% continuous operation): 99.5 kVA Automatic tool changer: - Number of tools: 120-station, SK50 DIN 69871 EQUIPMENT / SPECIAL ACCESSORIES: - CNC control: MAZATROL MATRIX - Further high-quality special equipment ... - Documentation - CE marking No guarantee for completeness or accuracy of technical data and equipment features. Subject to prior sale. Detailed technical datasheet and information on equipment available on request.

Leto izdelave: 2002, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Барабанная сушилка для опилок и щепы с производительностью до 15 т/ч. Состояние – полностью рабочая. Rsdpfx Aevx S Hnegtot

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, approx. 4.5 m long feed and centering table drive via chain from feed motor centers the roundwood in the middle of the rotor debarking machine VK 26 4 main cutters 4 pre-cutters 30 kW main motor 11 kW feed unit Rjdou Hmacspfx Agtet non-driven outfeed table machine workshop inspected machine cleaned and newly painted

Stanje: novo, Leto izdelave: 2024, Magnetic separator for chip transport line Tube magnet with 4 magnetic plates (permanent magnet) Redjcqvhwepfx Agtjt Hinged door for easy removal of metal parts Tube diameter: 180 mm Location: In stock at 54634 Bitburg - immediately available -

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC Year of manufacture: 2009, served as a demonstration machine until 2011, in production since 2012 The machine can be inspected under power by prior appointment. Condition: Very good (high accuracy), immediately operational. Spindle hours (as of August 1, 2025): 9,580 h The core feature of the machine is the integrated traveling column with turning-milling spindle and interpolating B-axis. Machine basic data: * Partial hollow chuck device (hydraulic) * C-axis * Upper cross slide with turning/milling spindle as a motor spindle, with hydraulic clamping during turning, interface: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Tool disc magazine * Absolute, direct position measuring systems in X, Y, Z1 axes * USB interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control unit: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Work area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Distance between centers: 1,510 mm * Max. bar diameter: 65 mm Rjdpfsw Hg Nlex Agtet Main drive I: * Drive power (100% / 40% duty cycle): 24 / 34 kW * Speed range: up to 5,000 rpm * C-axis speed: up to 5,000 rpm Turn-mill spindle: * Tool interface: Capto C6 * Spindle speed: up to 12,000 rpm * Drive power (100% / 40% duty cycle): 13.2 / 22 kW Tool magazine: * Number of tools: 36 * Machine dimensions (L/W/H) approx.: 6,860 x 4,220 x 2,530 mm * Approx. total weight: 18.5 t EQUIPMENT: Well-equipped ... * No steady rest * Complete documentation available No guarantee for completeness or accuracy of technical data and equipment specifications. A detailed technical data sheet and further information regarding the equipment are available on request.

Stanje: zelo dobro (rabljeno), CPM 2000 granulator, 90 kW motor, 410 mm die diameter. We have several units available. Rjdpewcdpnsfx Agtot

Stanje: generalkompletno obnovljen (rabljeno), AUTOMATISCHE KOMPLETTE BOHRSTRASSE, maximale Arbeitsbreite 3200 mm, mit schneller, automatischer Handhabungstechnik. Bestehend aus folgenden Maschinen: A) BESCHICKSTATION „RBO“ Winner C 3200 mit Doppel-Greifer und zentralem motorisiertem Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Zuführen der Plattenstapel zum Beschicker. B) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° Rsdpfx Asdfgg Isgtot C) 1. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten D) 2. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten E) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° G) ABSTAPELSTATION „RBO“ Winner SC 3200 mit Doppel-Greifer, mit Doppelablage, mit zentralem motorisierten Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Abfördern der Plattenstapel vom Abstapler.

Stanje: dober (rabljeno), Manufacturer: Haver & Boecker Documentation available Mechanical conversion from 50 kg to 25 kg bags in 1999 Control system: Siemens S7 Upgraded to the latest standard with spare parts support in 2015 Rjdpfx Agev Sz Tdjtst Supported bag types: quicklime, hydrated lime, cement, gypsum

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Well-maintained EMCO Hyperturn 665 MC Plus for sale, equipped with IEMCA Master 880MP-E bar feeder, chip conveyor, and high-pressure coolant pumps! Machine was used exclusively for brass components! CNC Turning and Milling Center | EMCO - HYPERTURN 665 MC Plus with main/ sub-spindle, C + Y axis, 2 turrets each with 12 positions for live tooling! Technical data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840 D Max. turning diameter: 430 mm Rsdpexzq Ncsfx Agtet Max. turning length: 744 mm Max. bar diameter: 65 mm Travel – X: 270 mm Travel – Z: 750 mm Travel – X2: 205 mm Travel – Z2: 750 mm Travel – Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2 x 12 positions, all live! Tool mounting: VDI 30 Upper turret: X, Z, Y axis Lower turret: X, Z axis Sub-spindle left/right movement: Z3 axis C11 spindle: 65 mm diameter (hollow clamping cylinder) C12 spindle: 45 mm diameter (solid clamping cylinder) with part ejector Tool turret type: Sauter 2 x 14 bar high-pressure pumps Accessories: - Complete tool cabinet with toolholders (live and static) as well as carbide inserts and toolholders - Collet chucks for main and sub-spindle - Complete documentation - and more Machine available immediately! Machine ready for operation immediately! Machine will be loaded by us! Transport can be organized upon request!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2018, For sale: a wood chip and sawdust drying system with a capacity of 400 kg/hour, including a raw material feeding unit. The machine is brand new and has never been commissioned. Rsdpfx Agstpxy Totot