Mütek Systemtechnik Cevni Magnet, Separator Kovin, Magnet nakup rabljenega (38.876)

Stanje: novo, Leto izdelave: 2026, Premer: 160 mm Za doplačilo je možno dobiti tudi v premerih: 180, 200, 250, 300 mm; dodatni premeri na zahtevo. Zelo robustna industrijska izvedba. Idealno za ločevanje žebljev/kovinskih delov iz materialnih tokov. Na primer za uporabo po lesnem drobilniku. Vključno s 3 izjemno zmogljivimi magneti. * Po želji je mogoče vgraditi do največ 6 magnetov v element – doplačilo za vsak dodatni magnet + 49 € - Za doplačilo so na voljo tudi neodim magneti namesto feritnih. Vaše prednosti: Bsdpjchuvrefx Agtowl + Izjemno velika revizijska vrata s tesnilom za lahko odstranjevanje žebljev + Stabilno hitro zapiranje + Izdelano v Nemčiji Revizijska vrata/odprtina: 35x18 cm Vgradna dolžina je lahko različna

Stanje: rabljeno, Goudsmit separator kovin, rotirajoči magnet Bedpfjyykdyjx Agtswl Dimenzije: 300mm x 300mm x 300mm Opremljen z 8 magnetnimi palicami Moč motorja: 0,18 kW, 22 obratov/min

Leto izdelave: 2026, stanje: novo, *Only the neodymium overband magnet is offered, not the conveyor belt underneath. *Neodymium magnets are among the strongest magnets in the world. They have extremely high holding force and cannot be compared to ferrite magnets. Extremely high separation efficiency, depending on the material height and input material. Probably the most compact overband magnet on the market. Competitors often use the less powerful ferrite magnets to save costs. Approximate dimensions: Length: 104 cm Width: 22 cm Bwedpfx Agodubpustol Height: 28 cm (at the motor) *Without control system Surcharge for simple manual start/stop control: + €495 A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600 x 68 x 36.5 mm * Over a length of 600 mm, nails are attracted and discharged sideways once outside the magnetic zone. This overband magnet should be installed approx. 7–10 cm above the material flow. *Mounting/suspension to be provided by the customer *depending on the maximum length of the metal pieces. Ideal for separating nails from wood chips. Optionally used in a single-shaft shredder with extraction. Requirements: * Your belt width or effective inner width (of the existing conveyor belt) should ideally be less than 55 cm *Suitable for separating nails from material flows less than 12 mm high, as well as chip lengths less than 25 mm. ----- Optional at extra cost: Cross and incline conveyor demo units from €8,770 net

Stanje: novo, Leto izdelave: 2026, * Optional features available at extra cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterized by their robust construction, ensuring consistent briquette quality during continuous operation. The compaction process takes place without the addition of binding agents—solely via hydraulic pressing force. Depending on the material, the input material volume can be reduced by up to 90%. The standard silo holds approx. 0.5 m³, but larger silos or special containers for installation below an existing extraction and filter system as a complete disposal unit are also available. Depending on customer requirements, MPP NEM individual machines can be combined into a complete system. The chip hopper of the press can be loaded manually, via conveyor belt, via dust extractor, or with a tilting container trolley. For systems intended for fully automatic operation, the use of a lift-and-tilt device, in conjunction with a shredder, is recommended. The MPP NEM briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm, and the diameter varies by type (50, 65, or 70 mm). To recover emulsions, the briquetting press can be equipped with a drip tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the briquetting press's feed hopper. An agitator is built into the bottom of the hopper to prevent bridging and feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compacts the material and pushes it into the press block. The main press cylinder then compresses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder subsequently lifts, and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the briquette lengths. Advantages of briquette production include: - Volume reduction by up to 90% - Emulsion recovery - Cost savings on storage and transport - Economical disposal - Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to 350 kg/h max (material-dependent; chip length less than 10 mm) Last test with aluminum chips < 18 mm: approx. 260 kg/h Bodpfegfm Ryjx Agtowl *More details available after a free test with your material. Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Total connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 litres Dimensions (LxWxH): 2500 x 1700 x 1730 mm Weight: 2250 kg Hydraulic pre-compaction via ram Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Stanje: novo, Leto izdelave: 2026, Our best-selling briquetting press – the classic choice. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Outstanding price-performance ratio Optional extras (available at additional cost): *Surcharge for fill level sensor, enabling automatic operation: + €995 net *Surcharge for large pre-compression chamber + €970 (Recommended for very light materials such as straw, increases machine width by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg/m³ Motor power: 5.5 kW Bwodpfxegl Nlmj Agtsl 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump output: 37 liters Hydraulic pre-compressor Press tongs cooling option: No Hydraulic oil cooling option: Yes Fill level monitoring option: Yes CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and max. 18% - Maximum chip length 15 mm - Installation temperature: Tempered room, at least +5°C - Customer must provide protection against hydraulic oil loss - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Special price for our demonstration machine Another unit available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood and pallet offcuts. Pallets must be pre-cut with a jigsaw or chainsaw so that they fit upright into the hopper—see image 2. Ideally, dimensions of approx. 40x20x20 cm allow the wood to lie flat on the ram base, which is the most efficient way for the machine to process it. A hydraulically driven ram at the bottom of the shredder pushes the wood against the rotor, with the pressure adjusted according to load. Material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour (*depending on screen size and material preparation). *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor + Concave blades + Heavy-duty large gearbox + Special load-dependent ram control system Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15 pieces, multiple-use (reversible) Option: Double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Fill volume: approx. 0.6 m³ Hydraulically actuated ram Screen perforation as requested (10–30mm) Extraction outlet Ø 160 mm Weight: approx. 1,300 kg (depending on configuration) Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% oven dry Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC Bwodpfxodwktkj Agtsl - Automatic star-delta starter - High-speed hydraulics - Automatic shut-off in case of rotor idle - 70–90 rpm for high throughput - Cycle control to avoid idle times - Performance-boosting step control of the hydraulic ram - Pertinax guides for hydraulic ram - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Shredder options: - Raise shredder by 30 cm (preparation for conveyor) + €2,080 net - Angled conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €5,980 net - Control for conveyor and overband magnet + €2,750 net (Start/stop synchronized with shredder) - Extended hopper + €940 net - Eco rings: + €1,980 net (recommended for more than 15% hardwood content) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Raw material requirements: - Moisture content (oven dry) must be below 30% - Metal or mineral contaminants such as sand, stones, etc., increase wear.

Stanje: novo, Leto izdelave: 2025, Še en stroj na voljo takoj! Bwsdpfxjv Rpxle Agtjl Briketirka s krmilnikom PLC in avtomatiko za dolžino briketa Zmogljivost: do največ 60 kg/h Briket: 50 mm valjaste oblike Motor: 5,5 kW Dimenzije: 1.900 x 1.350 x 1.410 mm Teža: pribl. 860 kg. Zahteve: Izhodni material idealno krajši od 25 mm dolžine ostružkov Vsebnost vlage 6–12 % ATRO Stroj je primeren za občasno delovanje. Npr. do 2,5 ure briketiranja, 1 ura premora itd. Če naj stroj deluje neprekinjeno več kot 2,5 ure, je treba priključiti opcijsko hlajenje.

Stanje: novo, Leto izdelave: 2026, Production time for the machine approx. 3.5 months Very robust machine with high pressing force - Also suitable for already producing a saleable briquette quality, depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development and expertise + Several thousand machines in use with satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + €3,995 net (can also be retrofitted) * cools the pressing tongs (important from 3.5 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a stretch. Large pre-compactor chamber + €1,975 net Recommended for lightweight input materials such as planing shavings Customs tariff number: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (depending on material): up to 110 kg/h* Last test: approx. 87 kg/h *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter . Bedeffh Atspfx Agtjwl Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,925 mm Width: 1,100 mm Height: 1,500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compactor Press tong cooling option: yes, with special accessory of coolable press tongs Cooling of the press tongs via a water tank (must be supplied by the customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes Continuous briquette option: yes (material-dependent) CE compliant . Requirements for the raw material: - The moisture content (oven dry basis) must be at least 6% and no more than 18% - Maximum chip length: 15 mm - Installation temperature: heated room of at least +5°C - The feed material must be free of metal and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result

Stanje: dober (rabljeno), Clean air extraction Used machine, good condition Pictures to follow Mobile Jet 160 Connection: 160 mm Fan: 2.2 kW Airflow: 1,850 m³/h / 400 V Bwsdpfx Agsrb D Njtel

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, The ideal machine for shredding cables including optimized cutting geometry Bwsdpfsgmfa Asx Agtjl approx. 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Blades: 14 pieces, 40x40mm, multiple edges (reversible), Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume: approx. 0.6 m³, Hydraulically operated pusher Screen perforation as required (15 - 40mm) Extraction nozzle Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double blade row + €995 net (28 instead of 14) - Extra charge for 4-sided segmented floor + €3,750 net (prevents pusher from jamming. Recommended for shredding plastics, paper, veneers with thickness less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angle conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with shredder) Bea9ia3l27 Raw material requirements: - Mineral contamination such as sand, stones, etc. leads to increased wear. We are happy to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight carrier and we will document the test with photos and videos.

Leto izdelave: 2014, stanje: rabljeno, Ponujamo ta rabljen nadtrakni magnetni separator IFE Aufbereitungstechnik GmbH MPQ 750, letnik 2014. Če imate vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite. Bwjdpfx Aoyxrpnsgtol

Leto izdelave: 2024, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Application Description: Bwedpfx Agoh D H Rcetel MAGNETIC series overbelt magnetic separators are used for bulk materials to automatically remove ferrous contaminants in waste recycling processes. In addition to effective metal recovery, these separators provide protection for downstream recycling equipment. Overbelt separators are used to separate larger ferrous particles, typically installed above conveyor belts or vibrating feeders. Belt separators are applied in various sectors: -removal of scrap from coal and aggregates -cleaning of wood chips and shavings -recovery of ferrous elements from cable granulate -removal of ferrous fraction in WEEE recycling -cleaning of plastics -cleaning of municipal waste Contact us for more information!

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Steinert NES 100 220 E 5009 naprodaj Proizvajalec: Steinert Tip: NES 100 220 E 5009 Bwedpfx Agjxb S Srotjl Širina traku: 1.000 mm (nov trak) Z novo krmilno enoto. Prenovljeno, uravnoteženo, peskano in prebarvano.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Naprodaj 2 kosa "Steinert NES 200 220 E 5009" Bsdpfoxb Tbzjx Agtswl Proizvajalec: Steinert Tip: NES 200 220 E 5009 Širina traku: 2.000 mm (nov trak) Z novo krmilno enoto. Prenovljeno, uravnoteženo, peskano in prebarvano.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Steinert NES 125 220 E 5009 na prodaj Proizvajalec: Steinert Tip: NES 125 220 E 5009 Širina traku: 1.500 mm (novi trak) Bedpfxexb S Exe Agtjwl Z novo krmilno enoto. Prenovljeno, uravnoteženo, peskano in prebarvano.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, 3 kom. Steinert NES 150 220 E 5009 naprodaj Proizvajalec: Steinert Bwedpfxeu S Sbyj Agtel Tip: NES 150 220 E 5009 Širina traku: 1.500 mm (nov trak) Z novo ali dobro ohranjeno rabljeno krmilno enoto. Prenovljeno, peskano in prebarvano.

Stanje: rabljeno, Leto izdelave: 2015, No. 10033 STEINERT WDS 92 Wet Drum Magnetic Separator (without CE package) Used, year of manufacture: 2015 Bjdpjyl Sqwefx Agtswl According to our customer / the previous owner, the machine is fully operational and can be inspected and tested on site. Without CE package. Highly efficient recovery of FeSi or magnetite from sink-float separation and wet processing of fine material. The STEINERT WDS is especially used in the processing of dense media or iron ore with particle sizes ranging from 1 μm to 3 mm. In the regeneration of dense media, the wet drum magnetic separator essentially enables the recovery of magnetite or ferrosilicon (FeSi). By using powerful neodymium-iron-boron magnets and specially designed magnet assemblies, high field strengths are achieved, allowing for high separation rates exceeding 99%. Sale on behalf of customer, ex location near 54634 Bitburg, without dismantling, transport, or installation. Dismantling, transport, and loading by us possible as an option. Specifications and price subject to change. To avoid possible misunderstandings, on-site inspection by appointment is possible and recommended. Sale in as-is condition. Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure and/or information from previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded. Sold "as inspected". Photos and videos are for illustration purposes only and do not represent the actual scope of delivery. Terms of payment: Prices plus statutory VAT, payment before collection or shipping. Delivery terms: ex location.

Stanje: generalkompletno obnovljen (rabljeno), "Wagner 451-130/160-600" for sale With new transformer from 380 V AC to 220 V DC. Bjdpeglvwgofx Agtewl Manufacturer: Wagner Model: 451-130/160-600 Power: 10.9 / 7.2 kW Amperage: 49.3 / 32.5 A Voltage: 220 V DC Magnet (L x W): 1,600 x 1,300 mm Rubber conveyor belt: 1,400 mm Overall length: 2,530 mm

Leto izdelave: 2022, obratovalne ure: 975 h, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, skupna masa: 9.600 kg, skupna dolžina: 6.050 mm, skupna širina: 2.450 mm, skupna višina: 2.700 mm, številka stroja/vozila: B0501, MAGNETNI BOBEN sestavljata dvostopenjska bobenska magnetska separacija, ki ločuje vse magnetne delce iz materialnega toka. Ker je moč obeh magnetnih bobnov izbirna in ju je mogoče po potrebi vklopiti ali izklopiti, je ta modul zelo prilagodljiv in ga je možno vedno prilagoditi vhodnemu materialu glede na specifikacijo. Bjdpfsxt Dqqsx Agtowl Dvojna magnetna separacija omogoča doseganje višje stopnje čistosti ob nespremenjenem pretoku. Ta modul je del naše najemne flote.

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 289 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: B0201, skupna širina: 2.450 mm, skupna dolžina: 6.050 mm, skupna višina: 2.700 mm, lastna masa: 9.600 kg, V našem FEED VIBRO je vgrajena kombinacija dozirnega lijaka, izravnalnega valja in dozirnih drsnikov, ki zagotavljajo stalen dovod materiala. Zahvaljujoč integriranemu bobnastemu magnetnemu separatorju z nastavljivo močjo je mogoče sortirati magnetne delce. Če je zaželeno samo doziranje brez magnetne separacije, je mogoče magnetni sistem deaktivirati. Bjdpjxrtt Ssfx Agtowl Ta modul je del naše najemne flote.

Leto izdelave: 2016, stanje: rabljeno, Metalni separator, 3 kosi, podjetja Sesotec so naprodaj. Naši GF detektorji kovin za pnevmatične aplikacije nudijo optimalno zaščito pred zastoji v proizvodnji, prekinitvami in reklamacijami strank. Bodjyrl Nyopfx Agtswl Primeren za jeklo, baker, neželezne kovine ter nerjavno jeklo.

Leto izdelave: 2016, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Miltenyi Biotec CliniMACS Plus Magnetni celični separator, letnik 2016. Naprava Miltenyi Biotec CliniMACS Plus, kataloška številka 44085, je sistem za ločevanje celic, zasnovan za klinično ločevanje ciljanih celic oziroma odstranjevanje nezaželenih celic iz krvnih pripravkov. Avtomatizira postopek ločevanja celic v sterilnem okolju, kar omogoča ločevanje in zbiranje različnih frakcij v ločenih vrečkah. Sistem je široko uporaben v regenerativni medicini, adoptivni imunoterapiji in manipulaciji presadkov. Celice se v pripravljalni vrečki magnetno označijo in nato ločijo, kar zagotavlja visoko čistost in odličen izkoristek. Z optimiziranimi protokoli sistem združuje ponovljivost ter enostavnost uporabe. Tehnične specifikacije: Dimenzije: 70 cm x 60 cm x 90 cm (š × g × v) Teža: cca 35 kg Vhodna napetost: 100–240 V~ Poraba energije: 350 W Zaslon: 10,1'' TFT zaslon na dotik Vrste vhodnega materiala: levkafereza, kostni mozeg Procesni koraki: Deplecija in obogatitev celic s pomočjo magnetnega ločevanja Bwsdpfxst E Hl Io Agtsl Naprava je v dobrem delovnem stanju. Oglejte si tudi naše ostale ponudbe.

Leto izdelave: 2020, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Miltenyi Biotec CliniMACS Plus, magnetni separator celic, letnik 2020. Uporabniku prijazne ključne komponente instrumenta CliniMACS Plus omogočajo napredne aplikacije za različne vrste ločevanja celic. Izbrane matične celice, monociti, dendritične celice (DC), naravne celice ubijalke (NK), B in različne podskupine T celic omogočajo raziskave na področju regenerativne medicine, adoptivne imunoterapije in inženiringa presadkov. Celic se magnetno označi v pripravljalni vrečki s specifičnim antigenim reagentom. Nato se pripravljalna vrečka priključi na instrument CliniMACS Plus. Intuitivna programska oprema omogoča obogatitev ali odstranitev ciljnih celic ter končni zbir v zbiralni vrečki. Sistem CliniMACS omogoča ločevanje večjih količin celic z visoko čistostjo ciljnih celic in odličnim izkoristkom. Bwjdpfxot E Hmrs Agtsl Električna napetost: 100-240V, 50/60Hz, 4A, 350VA Dobro ohranjen in delujoč. Oglejte si še druge naše oglase.

Leto izdelave: 2016, stanje: skoraj kot novo (rabljeno), Die benutzerfreundlichen Hauptkomponenten des CliniMACS Plus Instruments bieten anspruchsvolle Anwendungen für eine Vielzahl von Separationen. Die selektierten Stammzellen, Monozyten, DCs, NK-Zellen, B-Zellen sowie T-Zell-Subpopulationen ermöglichen Forschungen in den Bereichen regenerative Medizin, adoptive Immuntherapie und Transplantat-Engineering. Vollständige Systemsteuerung über einen integrierten Mikrocomputer Automatisierte Zellseparation durch eine magnetische Trenneinheit mit sowohl beweglichem Permanentmagneten als auch Halterung für die Separationssäule Eine Peristaltikpumpe gewährleistet einen durchgängigen Fluss im gesamten Schlauchset Diverse Quetschventile unterstützen die Peristaltikpumpe bei der genauen Steuerung des Puffers und der Zellaufschlemmung Die magnetische Markierung der Zellen erfolgt im Cell Preparation Bag mittels antigenspezifischem Reagenz. Anschließend wird der Cell Preparation Bag mit dem CliniMACS Plus Instrument verbunden. Benutzerfreundliche Software unterstützt die Anreicherung bzw. Depletion der Zielzellen sowie deren abschließende Sammlung im Cell Collection Bag. Das CliniMACS System verarbeitet große Zellmengen und liefert Zielzellen mit hoher Reinheit und exzellenter Ausbeute. Bodoiptzfspfx Agtowl Guter, funktionsfähiger Zustand. Bitte sehen Sie sich auch unsere weiteren Angebote an.

Stanje: pripravljen za uporabo (rabljen), An IFE magnetic separator with a Wagner magnet is available. Magnet type: FE0446-30/55, magnet weight: approx. 78 kg. An on-site inspection is possible. Bsdpfx Aov Dwi Eogtowl