Briketirni stroji nakup rabljenega (88)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, The A 100 N features the same characteristics as the A6 Plus and Junior, however, both the motor and the hydraulic pump are larger, and the electrical system is more advanced. Kjdjwyc H Tspfx Adkodi General features: - Robust construction - Very easy to operate and economical in operation - Simple maintenance - Inspection door with window - Mechanical level probe (rotary paddle switch) - Oil filter in the hydraulic circuit - Pressure gauge for oil pressure monitoring - Low oil level switch - Control panel at the front of the machine - Automatic sensor for press start/stop - Emergency stop button - Wiring diagram - CE marking - Operating manual Technical data: - Motor power: 7.5 kW, connection value 400 V, 50 Hz - Number of pressing cycles per minute: 14 - Capacity: 60 – 100 kg/h (depending on material) - Briquette diameter: 65 mm - Number of hydraulic cylinders: 3 - Oil tank volume: approx. 180 litres - Hopper diameter: approx. 1200 mm Dimensions (L x W x H): 2115 x 1350 x 1700 mm Weight: approx. 1000 kg Incl. approx. 2 m briquette discharge pipe Used machinery notice: • Subject to technical changes and prior sale. • Prices stated are ex-works, loaded free of charge at location! • The machine has been cleaned and function-tested. • All machines are sold as inspected without any warranty. Buyers are welcome to inspect the machine at our site. • Special agreements are only valid if made in writing. (We will only respond to inquiries that include your address and telephone number!)

Stanje: rabljeno, Leto izdelave: 2009, Briquetirna stiskalnica s posodo, motor 7,5 kW. Premer briketa: 50 mm. Zmogljivost: 80–100 kg/h. Teža: cca 870 kg. Količina olja: 100 l. Z oljnim grelcem, mešalom in polžnim transportom. S senzorjem nivoja in samodejnim vklopom. Velikost posode: 1500 x 1500 x 900 mm. Skupne dimenzije: 2300 x 1800 x 1200 mm. Obratovalne ure: 3370 h. Lokacija skladišča: Nattheim. Kdsdpfx Adox Twb Sskji

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, premer briketa: 60 mm, Refurbished machine suitable for smaller single-shift woodworking operations. It offers a robust construction while maintaining good performance. Max. briquette output 70 kg/h. Year of manufacture: 2003. In very good and well-maintained condition. Original warranty and post-warranty service provided directly by our company. Professional PRODECO hydraulic briquetting presses are ideal for small and medium-sized woodworking businesses. They enable efficient processing of waste into environmentally clean and highly calorific fuel without the use of binders. Key features include compact footprint, low energy consumption, and easy operation. Technical specifications: Motor output: 5.5 kW Briquette production: 35 to 70 kg/h, depending on material Briquette diameter: 60 mm Briquette stroke max. 60 mm (so-called endless briquette) Hopper diameter: 1000 mm Weight: 650 kg Machine dimensions: 1170 x 1700 x 1510 mm Features: Hydraulic unit with 7 compression cycles per minute Dual pressure gauge for better pressure control Sensor for briquetted material level Sensor for oil level Kdedpfjvva Rpox Adksi Inspection window CE safety standard compliant Moisture content of processed material must not exceed 18% The machine is refurbished, calibrated, and tested.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, obratovalne ure: 21.000 h, Funkcionalnost: popolnoma funkcionalen, leto zadnje generalne obnove: 2024, vrsta zaščite (IP koda): IP54, Stiskalnica za brikete RUF 400 CELOVITA LINIJA ZA BRIKETIRANJE NA VOLJO ZA NAKUP: Bobnasti sušilec za žagovino Vijak za podajanje Tračni transporter – 2 kosa Separator s lijakom Polžasti transporter – 6 kosov Skladiščni zalogovnik za mokre žagovine Ksdpfsxu Ryuex Adkedi Zalogovnik za gorivo Kotlovnica na lesne odpadke Drogalnik lesnih odpadkov Izvlečni ventilator s ciklonom Pakirni stroj s kompresorjem Dodatne fotografije in informacije so na voljo ob resnem povpraševanju.

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Briketirni stroj za les ali lesu podobne materiale Kdedpfow Hpizex Adkoi Delovne ure: 1205 Kapaciteta: do največ 100 kg/h Briketi: 60 mm cilindrični Motor: 7,5 kW Dimenzije: cca 2150 x 1700 x 1400 mm Velikost rezervoarja: 1400 x 1400 x 920 mm Opcijsko: Možna odvzemna naprava kot nastavek na lijak. Zahteve: Izhodni material idealno krajši od 25 mm (dolžina iveri) Vsebnost vlage 6–12 % ATRO Stroj primeren za diskontinuirano delovanje. Npr. do 2,5 ure briketiranja, 1 ura pavze itd. Če naj stroj deluje neprekinjeno več kot 2,5 ure, je potrebno dodati opcijsko hlajenje.

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Two pre-owned briquetting presses from Pawert SPM / 3 briquetting presses Di Più For the Pawert presses, as per the following configuration: - 2 steel silos, each approx. 20 m³ effective capacity, including silo discharge equipment - 1 briquetting press, Manufacturer: SPM PAWERT AG, Type 84/1 - 90/200, Serial No.: 1060, Power: 55 kW - 1 briquetting press, Manufacturer: SPM PAWERT AG, Type 96/1 - 90/200 SBP, Serial No.: 1140 - Complete transport line incl. 2 cooling sections, conveyor belts, roller conveyors, etc. - 2 cutting stations - 1 soundproof cabin for the cut-off saws - 1 feeder, manufacturer: KÖRA, model Packmat, likely type EF-235 - 1 shrink wrapper, manufacturer: KALLFASS, type Super Wrap 650 – De luxe – inline, serial no.: VD 03.08.445, year: 2000 incl. shrink tunnel - Accessories: control & power cabinets, PC controls, frequency converters - Spare parts as per Appendix 1 Plant boundaries: - Material input: flange of the chip conveyor in the sawdust hopper before the presses - Power supply: input terminals in the Pawert control cabinet ––– Technical Data (per machine): Type: Di Più BRIK MB100 Year of manufacture: 2009 Briquette diameter: approx. 90 – 110 mm Production capacity: approx. 1,300 – 2,300 kg/h Compaction pressure: approx. 2,000 – 2,500 kg/cm² Main motor: 75 kW Total power: approx. 98 kW Moisture content: optimal 8 – 12 % Particle size: approx. 1 – 12 mm Weight: approx. 7,800 kg per machine Drive: hydraulic piston press ––– Equipment: Feed hopper Screw conveyors Hydraulic system Switch cabinets Saws for briquette length cutting Protective covers & safety systems Discharge units ––– Scope of delivery: 3 complete Di Più MB100 briquetting presses Saws Conveyor technology & accessories Spare parts by arrangement ––– Fields of application: Sawmills Wood processing Biomass operations Briquette production for energy & sales Location: 3383 Inning Kdsdpeyiyhfefx Adkoi Transport: organization available upon request Price: on request Sale as single units or as a complete package possible

Stanje: zelo dobro (rabljeno), Katalogna številka 7737 TEHNIČNI PODATKI - Pritisna sila: hidravlična - Oblika briketa: okrogla - Premer briketa: 70 mm - Premer rezervoarja: 1000 mm - Zmogljivost: približno 70 kg/h - Avtomatsko delovanje stroja - Motor: 5,5 kW Kjdpfx Adeycid Ajkodi - Dimenzije (d/š/v): 1800x1150x1540 mm - Teža: 900 kg PREDNOSTI – Izdelano v Italiji – Rabljena briketirka – DTR dokumentacija – Zelo dobro stanje Neto cena: 34.900 PLN Neto cena: 8.300 EUR glede na tečaj 4,2 EUR (Cene se lahko spreminjajo ob večjih nihanjih)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 12.000 h, Funkcionalnost: popolnoma funkcionalen, Naprodaj 4 briketirke za žagovino UMP BP 500 A, letniki 2017, 2022, 2022, 2023. Stroji so v celoti delujoči, vsi po popolnem servisu. Kodpfx Adoyr S T Sjksdi

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Briketirka model UMP BP600. Briketirka v dobrem stanju. Kdsdpfxextf S Ae Adkji

Stanje: dober (rabljeno), Leto izdelave: 2001, Dobre ohranjeno, rabljeno stanje Malo delovnih ur (1675 h) Motor: 11 kW Tlak: nastavljiv do največ 250 barov Pretok do največ 220 kg/h Briket: 150x60 mm Dimenzije stiskalnice: pribl. 2200x3000x1920 mm (D x Š x V) Dimenzije krmilne omare: 500x1250x2120 mm (D x Š x V) Teža pribl. 3000 kg Kjdpfx Aewcc D Rsdkjdi

Stanje: potreben popravila (rabljeno), Leto izdelave: 1996, *Zelo dobra ponudba, popolna za domače mojstre* Stiskalnica za brikete za lesne sekance ipd. Okrogli briketi. Prodajamo po nizki ceni, saj stroj trenutno ni v delovanju. Kdodpfxjyuyhvj Adksi Do nedavnega je bil v uporabi. Stroj izdelan v Italiji. Dostava po celotni EU.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1113, skupna širina: 1.170 mm, skupna višina: 1.510 mm, skupna dolžina: 1.850 mm, premer briketa: 60 mm, skupna masa: 770 kg, Never used = As-new machine condition Year of manufacture: 2024 Operating hours: 6! - Option for water or oil cooling, suitable for larger or multi-shift operations (price stated without cooling) Kdedpfoyh Nfhjx Adksi - Sufficiently large feed hopper ensures extended work cycles without frequent material refilling Technical specifications: Motor power: 7.5 kW Briquette output: 40–100 kg/h depending on material Briquette diameter: 60 mm Briquette length max 60 mm (so-called endless briquette) Pressing pressure: 900 kg/cm² Hopper diameter: 1000 mm Dimensions: 1850 x 1170 x 1510 mm Weight: 770 kg Features: Hydraulic unit: 7 pressing cycles/min LCD Siemens touchscreen programmable control panel Manual or fully automatic operation – PLC control – Siemens Dual pressure gauge for improved pressure monitoring Briquetted material level sensor Oil level sensor Preheating unit for operation in cold environments Inspection window Option for integration into existing production lines Voltage: 400V – 50 Hz Moisture content of processed material must not exceed 18%

Stanje: novo, Leto izdelave: 2026, Our best-selling briquetting press – the classic choice. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Outstanding price-performance ratio Optional extras (available at additional cost): *Surcharge for fill level sensor, enabling automatic operation: + €995 net *Surcharge for large pre-compression chamber + €970 (Recommended for very light materials such as straw, increases machine width by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg/m³ Motor power: 5.5 kW Ksdpfjgl Nlmsx Adkjdi 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump output: 37 liters Hydraulic pre-compressor Press tongs cooling option: No Hydraulic oil cooling option: Yes Fill level monitoring option: Yes CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and max. 18% - Maximum chip length 15 mm - Installation temperature: Tempered room, at least +5°C - Customer must provide protection against hydraulic oil loss - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, KATALOGŠKA ŠTEVILKA 7852 Tehnični podatki: - pritisna sila: hidravlična - oblika briketa: okrogla - premer briketa: 60 mm - premer rezervoarja: 1000 mm - zmogljivost: cca 110 kg/h - samodejno delovanje stroja Kdedpfjx Hhzvex Adkei - hladilnik olja - motor: 7,5 kW - dimenzije (d/š/v): 1800x1100x1500 mm - teža: 730 kg PREDNOSTI – ni prebarvan – italijanska proizvodnja – rabljena briketirka – originalna dokumentacija DTR + CE – odlično stanje, leto izdelave 2021 Neto cena: 46.900 PLN Neto cena: 11.170 EUR Neto cena izračunana po tečaju 4,2 PLN/EUR (v primeru večjih tečajnih nihanj se cena lahko spremeni)

Stanje: novo, Leto izdelave: 2026, Availability upon request Very robust machine with high pressing force - also suitable for producing marketable briquette quality *depending on material. This is made possible by the large-dimensioned press cylinder and the 70 mm briquette size. Our best-selling briquetting press series + Proven, simple technology, ensuring extremely low susceptibility to failure + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers Kedped Nm Sisfx Adkodi + Excellent value for money Optional demonstration cooling unit surcharge: + €4,980 net (can also be retrofitted later) * Cools the press clamp (important from 4 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation exceeding 4 hours continuously Commodity code: 84793010 Briquette diameter: 70 mm Front sleeve: 125 mm Max. briquetting stroke: 100 mm Optimal briquetting stroke: 80 mm Capacity (material-dependent): up to 150 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor output: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2,095 mm Width: 1,300 mm *with large chamber 1,600 mm Height: 1,700 mm Weight: 1,250 kg Oil volume: 220 liters Silo diameter: 1,200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Hydraulic pre-compressor Press clamp cooling option: yes, with optional coolable press clamp Hydraulic oil cooling option: yes Cooling of press clamp and hydraulic oil possible with optional cooling unit Level monitoring option: yes Continuous strand briquette option: yes (material-dependent) Enlarged filling slider option: yes, with optional enlarged filling slider CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: heated room with at least +5°C - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur

Stanje: novo, Leto izdelave: 2026, obratovalne ure: 8 h, Availability upon agreement Very robust machine with high pressing force - Also suitable for producing a marketable briquette quality *depending on material. The large-dimensioned pressing cylinder and the 80 mm briquette diameter make this possible. Our bestselling briquetting press series Kodpsxfwdofx Adkodi + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Surcharge for cooling unit + €4,995 net (can also be retrofitted later) * Cools the pressing tongs and hydraulic oil (recommended if the press is operated continuously for more than approx. 3.5 hours without pause) Briquette diameter: 80 mm Front bush: 125 mm Maximum briquette stroke: 100 mm Optimal briquette stroke: 80 mm Throughput (depending on material): up to 200 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo capacity: approx. 1 cbm Pump: 75 liters Hydraulic pre-compressor Press jaw cooling option: yes, with special accessory coolable press jaw Hydraulic oil cooling option: yes Cooling of press jaw and hydraulic oil with cooling unit (special accessory) Fill level monitoring option: yes Continuous briquette option: yes (material dependent) Enlarged filling slider option: yes, with special accessory enlarged filling slider CE compliant Requirements for raw material: - The moisture content (atro) must be at least 6% and not exceed 18% - Maximum chip length 20 mm - Installation temperature: heated environment, at least +5°C - The feedstock must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may occur as a result.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine available at a special price Kedod Nnwlepfx Adkodi Another machine immediately available (ex works Neckartailfingen) * Includes 1-year warranty. Your advantages: + Very robust, straightforward technology + Excellent value for money + Suitable for continuous operation + Long-established, reliable machine Includes control cabinet with timer operation The press is manually activated and then runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square) Briquette length: 5-40 mm (material-dependent) Throughput capacity: up to 20 kg/h max. (material-dependent) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Material requirements: - Wood shavings and dust smaller than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals, and minerals accelerate wear --- Options at extra cost: - Timer function + €490 (net) Machine is started manually and switches off automatically after set time X. - Fill level sensor for automatic operation + €1,450 (net) Press starts and stops automatically * NEW!!! Now available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €890 (net) (delivery time approx. 8 weeks) - Special pressing units + €2,950 (net) ---

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Machine available at a special price Machine available immediately (ex works Neckartailfingen) Demonstration unit Your benefits: + Very robust, simple technology + Excellent price/performance ratio + Suitable for continuous operation + Proven, well-functioning and established machine over many years Includes control cabinet with timer operation The press is manually started and runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm (depending on material) Throughput capacity: up to max. 25 kg/h (depending on material) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V – 50 Hz Noise emission: 62 dB Raw material requirements: • Wood shavings and dust less than 15 mm in length • Moisture content less than 15% ATRO • Sand, stones, metals, and minerals increase wear --- Options at extra cost: Kedpfxofci D Aj Adksdi -Timer function + €490 net Machine is started manually and switches off automatically after the set time X. -Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €690 net (delivery time approx. 8 weeks) ---

Stanje: rabljeno, Silos za material 4 m³ Ventilator 11 & 4 kW Kapaciteta cca 6 briket/min Briketirna linija sestavljena iz: · Filtrirni stolp Spänex s celičnim rotacijskim ventilom · 2 x odsesovalna ventilatorja · Briketirni stroj Spänex SHB 250 K1 Kdsdpfjxp Izrsx Adkji Filtrirni stolp sesa material neposredno iz proizvodnje, kjer ga preko rotacijskega ventila in dodatnega ventilatorja naprej dovaja v silos za material pri briketirnem stroju. Na voljo po dogovoru od marca 2026 dalje. Prodaja stroja je pogojena s prodajo skobeljnega stroja: Ref. št. 100102 ali celotne skobeljne linije: Ref. št. 100101.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2014, premer briketa: 150 mm, skupna masa: 3.000 kg, moč: 30 kW (40,79 KM), Performance: 450-500 kg/h Max. pressing force: 1700 kg/cm² Input moisture content: 15% Length: 1800 mm Width: 1800 mm Kdedeqd Uy Aepfx Adkei Height: 1900 mm Transport height: 2200 mm Weight: 3000 kg Total power: 33 kW

Stanje: zelo dobro (rabljeno), Briketirni stroj je bil v celoti obnovljen pri proizvajalcu. Tehnični podatki: Premer briketa: 70 mm Kdodpfotianfsx Adksi Premer zalogovnika: 1200 mm Maksimalna dolžina briketa: 70 mm Kapaciteta: ~70 kg/h Napajanje: 400 V Moč motorja: 11 kW Skupne dimenzije: Dolžina: 2100 mm Višina: 1600 mm

Stanje: rabljeno, Tehnični podatki: Premer briket: 60 mm Dolžina briket: 50 mm Premer zalogovnika: 1100 mm Višina zalogovnika: 910 mm Prostornina zalogovnika: 0,89 m3 Zmogljivost: 60-80 kg/h Napajanje: 400 V Moč motorja: 7,5 kW Varnostno stikalo Skupne mere: Dolžina: 1670 mm Širina: 1100 mm Kedoxzqmzopfx Adkodi Višina: 1500 mm

Stanje: rabljeno, Tehnični podatki: Premer briketa: 70 mm Dolžina briketa: 70 mm Premer rezervoarja: 1200 mm Višina rezervoarja: 1000 mm Kdodpfxoxxxaws Adkoi Kapaciteta rezervoarja: 1,13 m³ Zmogljivost: 70–120 kg/h Napajanje: 400 V Moč motorja: 11 kW Varnostno stikalo.

Stanje: rabljeno, Briketirka Gross GP 80 Moč motorja: 7,5 kW, Premer briketa: 60 mm, Ksdoxpgyaopfx Adkodi Dimenzije zalogovnika: 145 x 145 cm Teža: 1200 kg Leto izdelave: 2016

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, moč: 55 kW (74,78 KM), Za prodajo je na voljo briketirnica Pawert 75/200, generalno obnovljena v letu 2025, pripravljena na takojšnje obratovanje. Tehnični podatki: Model: Pawert 75/200 Kapaciteta: do 1 t/h Moč glavnega motorja: 55 kW Stanje: generalno obnovljeno (2025) Pripadajoča oprema: -hladilna linija briketov -hidravlični sistem -dozirni polž -sistem hlajenja olja stroja -sistem hlajenja glave -komandni pult s PLC upravljanjem Kdsdjx Npitopfx Adkoi Prednosti: -zanesljiva industrijska briketirnica -primerna za neprekinjeno industrijsko uporabo