Weima nakup rabljenega (91)

Stanje: rabljeno, Leto izdelave: 2025, Posebna cena – razstavni stroj Tehnične specifikacije WL 4 Odprtina lijaka z Logspacerjem 600 x 1.050 mm Volumen lijaka 0,6 m³ Delovna širina rotorja 600 mm Premer rotorja 252 mm Pogonska moč 18,5 kW Hitrost vrtenja rotorja 80–120 obr/min Število nožev 28 kos Tip in velikost nožev konkavno / 40 x 40 mm, izmenljivi rezalni kroni Velikost lukenj na situ 15–20 mm Barva WEIMA standard RAL 2002 / 7016 Priključna moč 400 V +/- 5 % / 50 Hz Teža pribl. 1.300 kg Vključeno: • Električna omara* (Rittal) vklj. električnim krmiljenjem (Moeller / Siemens) in zagonom zvezda-trikot • Gumijasti nihajni elementi • V-rotor (patentiran) z vrezanimi žepki za nože v profilu • Končno stikalo menjalnika • Nihajni potisnik • Polovičen hod potisnika • Lijak z Logspacerjem • 2. vrsta nožev Hedpjxnlgpsfx Ah Djnu Lokacija skladišča: dobavitelj

Stanje: rabljeno, Leto izdelave: 2001, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 800 kg, vrsta vhodnega toka: trifazni, barva: siv, obratovalna teža: 800 kg, Naprodaj: hocker polytechnic drobilnik/shredder za papir, karton, knjige, dokumente, majhne papirnate tulce ter za predhodno drobljenje stiropora v granulat. Naprava je v zelo dobrem stanju. Priložena DTR dokumentacija. Cena neto + 23% DDV. Možna menjava za kanalno balirko. Tel. 880756209 WhatsApp. I speak English. Hsdpewmy A Esfx Ah Dsnu

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Low-noise, slow-running WL 4/18.5 kW Technical specifications: Hopper opening: 600 x 800 mm Hopper opening with log spacer: 600 x 1050 mm Hopper volume: approx. 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Number of blades: 28 pcs Blades: 40 x 40 mm, concave Screen perforation: 15/20 mm Hsdpfxobtnftj Ah Donu Included: Control cabinet Electrical control system Star-delta starter Rubber vibration elements Second blade row Log spacer (self-cleaning hopper) Top configuration Location: Ex stock Bitburg - immediately available - special price

Stanje: rabljeno, Rotor 1400 mm Odprtina 145 cm / 120 cm Motor 45 kW Mreža 60 mm Hnodpfexn H E Hex Ah Dsu 380V

Stanje: dober (rabljeno), Leto izdelave: 1999, Droblilec z poševnim dovodom, za krovce in tesarje, idealen za drobljenje strešnih letev z žeblji. Največja odprtina: 400 x 80 mm. Počasni tek: 250 obr./min. Motor: 18,5 kW. Velik premer rotorja. Veliki noži 40 x 40 mm, nameščeni na rob. Hsdpfx Aoxlm Ntoh Dsnu

Stanje: rabljeno, Feed opening 800x600 mm Motor power 18.5 kW Hopper capacity 0.6 m³ Rotor diameter 252 mm Dimensions (L/W/H) 1700x1130x1595 mm Weight 1300 kg Operating hours 1741 h WEIMA Shredder WL 4, machine fully inspected ----- Note: The machine has been fully inspected by us, runs perfectly, see video. Knives and slide plate have already been replaced by the previous owner. Drive belt was renewed by us during inspection. 1741 operating hours Description: The high-performance Weima shredders, with their versatile applications, can process all types of wood materials (hardwood, softwood, chipboard, MDF, plywood, veneer residues, etc.) into fuel chips. Especially with bulky materials, they achieve significant volume reduction. Functionality: The machine is equipped with a large hopper and can be fed either by conveyor belt or manually. This hopper can be adapted to individual requirements and guarantees continuous and cost-effective material feed without the need for manual assistance. The hydraulically controlled pusher feeds the wood waste to be shredded to the rotor’s cutting area and is automatically and load-dependently regulated. The internal pusher guides are made from highly wear-resistant plastic (polyamide) and are adjustable. The hydraulic cylinders are mounted with universal joints to avoid lateral forces on the piston seals. The patented, profiled V-rotor made of solid steel has a diameter of 252 mm and operates at a rotor speed of 80–120 rpm. The concave-ground, aggressive, and four-way reversible knives/cutting crowns are seated in milled knife pockets on special knife carriers. This patented system guarantees, for the first time, a reduction in the cutting gap between counter knife and rotor, ensuring high throughput, low energy consumption, and optimum discharge of shredded material. The screen located below the rotor determines the chip size (10–100 mm). Optionally, a hydraulically opening screen basket is also available. Power transmission from the electric motors is via V-belts to a heavily dimensioned gearbox, which is mounted on the end of the rotor shaft on one side. Technical data WL 4 / 18.5 kW ----- Feed opening: 600 x 800 mm Standard hopper volume: 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Power: 18.5 kW Rotor speed: approx. 90 rpm Screen diameter: 15 mm Paint finish: Weima standard RAL 2002 / 7016 Connection rating: 400 V +/- 5 % / 50 Hz Weight: approx. 1,300 kg Including: Electrical control (Moeller / Siemens / Allen-Bradley) Hnsdsvvx Dzspfx Ah Deu Control cabinet (Rittal / Sarell) Concave-ground reversible cutting crowns (40 x 40 mm) Star-delta starting Vibration damping foundation V-rotor (patented) with profile-milled knife pockets (technical data per manufacturer – no guarantee!)

Stanje: rabljeno, Leto izdelave: 2025, Special Price - Exhibition Machine Garbsen Our machine concept WL 6: The WEIMA high-performance shredder, with its flexible application possibilities, can process all types of wood materials (hardwood, softwood, chipboard, MDF, plywood, veneer offcuts, etc.) into fuel chips, achieving enormous volume reduction, especially with bulky materials. Operating principle: The machine is equipped with a large feed hopper, which can be loaded via conveyor belt or manually. This hopper can be customized to individual requirements and guarantees continuous and cost-effective material feeding without manual assistance. The hydraulically controlled pusher feeds the wood waste to be shredded into the rotor’s cutting area, with automatic, load-dependent regulation. The internal pusher guides are made from highly wear-resistant plastic (polyamide) and are adjustable. The hydraulic cylinders are mounted with gimbal suspension to prevent lateral forces on the piston seals. The patented and profiled V-rotor, made of solid steel, has a diameter of 252 mm and operates at a rotor speed of 80–120 rpm. The concave-ground, aggressive, and four-way reversible knives/cutting crowns are seated in milled knife pockets on special knife holders. This patented system guarantees, for the first time, a reduced cutting gap between counter-knife and rotor, resulting in high throughput, low energy consumption, and optimal discharge of the shredded material. The screen beneath the rotor determines the chip size (10–100 mm). Optionally, a hydraulically opening screen basket is available. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox, mounted on one side of the rotor shaft. Precise cutting at high throughput with profiled V-rotor: The V-rotor, specially developed by WEIMA, is universally applicable and made from solid material. Its aggressive material intake, with up to two knife rows, ensures high throughput with low power requirement. It can be equipped with hardened cutting knives (edge lengths 30 mm and 40 mm), which are multiple reversible when worn, drastically reducing maintenance costs. Intuitive operation via Siemens PLC control with touch display: To ensure optimal coordination of electronics and machine, we design, build, and wire our own control cabinets, exclusively using premium components (e.g., Siemens or Rittal). Intuitively operable touch surfaces ensure fast adjustments. Features such as adjusting the pusher stroke or stop ensure high throughput. Built-in overload protection also prevents machine damage. Technical Features WL 6 - Feed opening: 800 x 1,250 mm - Hopper volume: 0.9 m³ - Rotor length: 800 mm - Rotor diameter: 256 mm - Drive power: 22 kW - Rotor speed: 90 rpm - Max. number of knives: 42 pcs - Knife type and size: concave / 40 x 40 mm, reversible cutting crowns - Screen perforation: 10–60 mm - Paint finish: WEIMA standard RAL 2022 / 7016 - Electrical connection: 400 V +/- 5% / 50 Hz - Weight: approx. 1,600 kg - Including: Control cabinet (Rittal) with electrical control (Moeller/Siemens) and S Hjdpfjxnlbtsx Ah Dsnu

Stanje: zelo dobro (rabljeno), Kataloška številka 7672 TEHNIČNI PODATKI - Vhod lijaka za nalaganje 1200x1000mm - Izhod za drobljen les Ø160mm Hnsdpfswrpv Eox Ah Dju - Delovna širina rotorja 980mm - Glavni motor 18,5kW - Število nožev 24 kosov - Dimenzija noža 30x30mm - Sito 20mm - Prisilni predalnik - Električni autoreverz - Dimenzije d/š/v 2500x1700x1850mm - Teža približno 2500kg PREDNOSTI – Nemška proizvodnja – Avtoreverz – Prisilni predalnik – Zelo dobro stanje – Rabljen sekalnik Neto cena: 85.900 PLN Neto cena: 20.210 EUR po tečaju 4,25 EUR (Cene se lahko spremenijo ob večjih nihanjih)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Low-noise & slow-running WL 4/18.5 kW Technical Data: Hopper opening: 600 x 800 mm Hopper opening with log spacer: 600 x 1050 mm Hopper capacity: approx. 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Hnedpfxobunq Ho Ah Dsu Number of knives: 28 pcs Knives: 40 x 40 mm concave Screen perforation: 15/20 mm Includes: Control cabinet Electric control system Star-delta starter Rubber oscillating elements Second row of knives Log spacer (self-cleaning hopper) Location: 54634 Bitburg Immediately available

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, skupna masa: 2.000 kg, dolžina polnilne odprtine: 600 mm, širina odprtine za polnjenje: 700 mm, vrsta vhodnega toka: trifazni, Droblilec Weima ZM 30 S Hsdpsxlk T Asfx Ah Djnu Moč motorjev: 2 x 18,5 kW! Dimenzije komore: približno 600/700 mm. Sito. Teža približno 2000 kg. Dodan je tudi drugi set nožev. Cena na zahtevo. Več slik in delovni video na zahtevo. Možnost izvedbe testov. Več informacij po telefonu.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 619 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 910-2345, skupna širina: 1.120 mm, skupna višina: 1.400 mm, skupna dolžina: 1.700 mm, premer briketa: 40 mm, skupna masa: 600 kg, vrsta vhodnega toka: trifazni, vhodni tok: 12 A, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, pritisk: 150 letvica, moč: 4 kW (5,44 KM), Briketirka WEIMA C140 s posodo za ostružke, skoraj kot nova z zelo malo delovnih ur, z 380 V vtikačem, pripravljena za demonstracijo. Hnsdpjxg R Iiofx Ah Dsu

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 11.192 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 35.000 kg, premer rotorja: 800 mm, število rezil: 70, vrsta vhodnega toka: Klimatska naprava, Drobelnik WEIMA FineCut 2500-800 Stroj je delujoč, uporabljen pri proizvodnji alternativnega goriva. Trenutno je izključen iz uporabe in pripravljen za nakladanje. Hsdpfx Aswh Rcfsh Djnu

Stanje: novo, Leto izdelave: 2024, Super special price, as the machine was operated during our in-house exhibition. Operating hours: 2 Immediately available – subject to prior sale Once it’s gone, it’s gone! Compact design, high reliability, and excellent value for money: These are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foam, or paper. Special feature: the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Hodpelht H Esfx Ah Donu Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput capacity (kg/h): 30-40 Hydraulic oil volume (l): 100 Weight (kg): 530 Equipment: Press Powerful press mechanism with low-wear, chrome-plated jaws Pre-compactor with end-position damped cylinder and bolted cover Control cabinet with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Bin with agitator and gearbox motor Screw channel with discharge screw and gearbox motor Accessories: Briquette length monitoring Automatic on/off Location: 54634 Bitburg

Leto izdelave: 2012, Stanje: zelo dobro (rabljeno), Weima screen for 4-shaft shredder ZM 30 Screen size: 20/25 mm Hnjdjhh Dpkopfx Ah Dou Location: Available ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Weima Single-Shaft Shredder Type WL 6 Power: 18.5 kW Our Machine Concept WL 6 The high-performance Weima shredders, with their versatile applications, can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer offcuts, etc.) into fuel chips, achieving significant volume reduction particularly with bulky materials. Operating Principle: The machine is equipped with a large feed hopper and can be loaded either by conveyor belt or manually. This hopper can be customized to individual requirements and guarantees continuous and economical material infeed without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper volume: 0.9 m³ Rotor working width: 800 mm Rotor diameter: 252 mm Drive power: 18.5 kW Rotor speed: 80–120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, reversible cutting inserts Screen perforation: 10–60 mm possible (standard 15–20 mm) Paint finish: WEIMA Standard RAL 2002 / 7016 Connection: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration mounts - V-rotor (patented) with milled knife holders in profile - Gearbox limit switch - Pressure bar - Very robust Weima WAP gearbox - Logspacer (self-cleaning hopper) - Second row of knives Hnsdpfxjh Eiw Io Ah Deu Available from stock in 54634 Bitburg - Immediately available - Request more information

Stanje: novo, Leto izdelave: 2025, Weima Single-Shaft Shredder Type WL 6 Power: 18.5 kW Our Machine Concept WL 6 Weima high-performance shredders, with their flexible range of applications, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF, plywood, veneer offcuts, etc.) into fuel chips, achieving significant volume reduction of bulky materials in the process. Operating Principle: The machine is equipped with a large feed hopper and can be loaded either via a conveyor belt or manually. This hopper can be tailored to individual requirements and guarantees continuous and cost-effective material infeed without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper volume: 0.9 m³ Rotor working width: 800 mm Rotor diameter: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, reversible cutting crowns Screen perforation: 10–60 mm possible (standard 15–20 mm) Paint finish: WEIMA Standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Includes: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) and star-delta starter - Rubber anti-vibration mounts - V-rotor (patented) with profile-milled knife pockets - Gearbox limit switch - Pressure bar Hnjdpfx Ash Hnp Dsh Dou - Very robust Weima WAP gearbox - Logspacer (self-cleaning hopper) - Second row of knives Available ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Weima Shredder / Single-Shaft Shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used thousands of times in woodworking operations worldwide. The high production numbers of this highly sought-after shredder guarantee reliable, tried-and-tested technology at the best price-performance ratio. The machines are distinguished by their very robust construction, ensuring extremely high durability—even for outdoor use. Intuitive operation thanks to Siemens PLC control with touch display To ensure the electronics are perfectly matched to the machine, we design, build, and wire our control cabinets in-house. We exclusively use high-quality components, such as those from Siemens or Rittal. Intuitive touch interfaces guarantee fast adjustments. Functions such as setting the ram cycle or stop ensure high throughput. The integrated overload protection also prevents machine damage. No material blockages thanks to self-cleaning hopper design The hopper serves several purposes. Material to be shredded is loaded through it—either manually, with machinery, or via conveyor belt. The large opening also makes loading very large parts easy and convenient. Crucial for the shredding process is its special design, rounded at the front to effectively prevent material bridging. Even with bulky pieces, the shredder can self-feed and prevent jams. If required, hopper extensions and lids with gas struts are available. Durable rotor bearings thanks to isolated design A rotor bearing must be exceptionally robust due to the extreme stress during shredding operations. To prevent dust or foreign material from entering the bearing, we have separated it from the machine frame. This also makes it very easy to maintain and accessible. Hnjdpfx Ajmhh Idjh Dsu Technical Specifications: - Rotor diameter (mm): 260 - Rotor length (mm): 1000 - Rotor speed (rpm): 80 - 125 - Motor power (kW): 22 - Number of knives: 54 - Available knife sizes (mm): 40 x 40 - Particle size (mm): - Extraction port (mm): 200 - Infeed opening (mm): 1000 x 1250 - Length (mm): 2045 - Width (mm): 1740 - Height (mm): 1840 - Weight (approx. kg): 2200 Accessories: - Second row of knives - Logspacer Location: Arriving at warehouse 54634 Bitburg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, obratovalne ure: 1 h, Super special price, as this unit was run at our in-house exhibition. Hnsdpstnz Ttjfx Ah Dju Operating hours: 1 Immediately available – subject to prior sale. Once it's gone, it's gone! Compact design, high reliability, and an excellent price-performance ratio: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foam, or paper. A key feature: the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput capacity (kg/h): 30-40 Hydraulic oil volume (l): 100 Weight (kg): 530 Equipment: Press: - High-performance pressing mechanism with wear-resistant, chrome-plated jaws - Pre-compactor with end-position dampened cylinder and bolted cover - Control panel with PLC control system Hydraulic system: - Separate oil tank with pump motor and valve control - Safety switch for oil temperature Container with agitator and gear motor Screw conveyor channel with discharge screw and gear motor Accessories: - Briquette length monitoring - Automatic on/off Location: 54634 Bitburg

Stanje: novo, Leto izdelave: 2024, Your Advantages - Stable pressing mechanism with low-wear, chrome-plated pliers - Press chamber wear bushing - Pre-compactor with end-position damped cylinder and bolted cover - Control cabinet with PLC control - Screw channel with discharge auger - Separate oil tank with pump motor and valve control - Safety switch for oil temperature - Mounted on a stable base frame with rubber feet - Briquette length monitoring Robust design, low-maintenance technology, minimal space requirement: The machines of the C-series are particularly suitable for small and medium-sized businesses with a required throughput rate not exceeding 50–80 kg/h or 200 to 400 kg/day. Practically any suitable material can be briquetted, such as wood, styrofoam, foam materials, paper, or biomass. All machines are available in left- or right-handed configurations. Mounting on a stable base frame ensures quick installation and enables mobile use. Briquette diameter (mm): 50 Throughput rate up to (kg/h): 50 (depending on material) Hydraulic motor (kW): 5.5 Auger motor (kW): 0.55 Oil volume (liters): 100 Weight (approx. kg): 800 Outstanding Features at a Glance Hnodpfx Ascnz U Ejh Dsu - Hydraulics with separate oil tank: Temperature-monitored hydraulic unit, complete valve control, pump motor designed for long operating periods - Briquette length monitoring: Controls briquette length for uniform sizing - Press chamber wear bushing: Prevents wear in the pressing area Location: Ex works – free loaded

Stanje: novo, Leto izdelave: 2024, Weima Briquetting Press TH 714 The TH 714 machines are designed for operations requiring throughput capacities of up to 150 kg/h. The robust press housing enables the production of high-density briquettes from materials such as wood, polystyrene, foams, light metals, paper, or biomass. Numerous additional options can be implemented, such as an oil cooling system for multi-shift operation. All machines are available in both left- and right-hand designs. Installation on a stable base frame ensures quick setup and allows for mobile use. User-friendly operation thanks to Siemens PLC control To uphold our performance promise, we design and manufacture all control cabinets ourselves at our Ilsfeld location, equipping them with reputable international components. This guarantees the highest quality in a compact build. The Siemens PLC control system is perfectly tuned to the requirements of the briquetting process. Foreign-object-resistant conveyor screw via cardanic suspension The conveyor screw, which transports material into the briquetting press pre-compactor, is mounted on a cardan joint. This prevents foreign objects from damaging the conveyor screw. As always, the choice of mounting depends on the specific application. For metal processing, for example, we often recommend rigidly mounted screws. Briquette diameter (mm): 70 Throughput capacity up to (kg/h): 150*1 Hydraulic motor (kW): 11 Oil volume (litres): 250 Weight (approx. kg): 1100 Hjdpfx Aeil Hggjh Donu Location: Ex stock 54634 Bitburg - immediately available - Subject to prior sale

Stanje: novo, Leto izdelave: 2025, Weima Shredder / Granulator WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used thousands of times in woodworking operations worldwide. The high number of units of this highly sought-after shredder ensures trusted, reliable technology at the best price-performance ratio. The machines are characterized by their highly robust construction, ensuring extremely long service life (even outdoors). Intuitive Operation Thanks to Siemens PLC Control with Touch Display To guarantee the electronics are fully matched to the machine, we design, build, and wire our own control cabinets. We use only high-quality components – for example, from Siemens or Rittal. The intuitive touch interface allows for rapid adjustments. Features such as adjustable pusher stroke and stop enable high throughput. Built-in overload protection prevents damage to the machine. No Bridging Thanks to Self-Clearing Hopper Design The hopper fulfills several functions. It facilitates loading of materials to be shredded – manually, mechanically, or via conveyor. The generously sized opening makes it easy to load even very large pieces. The specially designed, rounded front ensures effective prevention of material bridging. Even with bulky parts, the shredder keeps itself clear. Hopper extensions or lids with gas struts are available upon request. Long-Lasting Rotor Bearings Thanks to Offset Design Rotor bearings must be extremely robust due to the high demands during operation. To prevent dust or foreign materials from entering, we designed the bearing assembly offset from the machine frame. This also improves serviceability and provides easy access. Technical Specifications: - Rotor diameter (mm): 260 - Rotor length (mm): 1000 Hnodspdqzxjpfx Ah Dsu - Rotor speed (rpm): 80 - 125 - Power (kW): 22 - Number of knives: 54 - Available knife sizes (mm): 40 x 40 - Particle size (mm): - Discharge port (mm): 200 - Feed opening (mm): 1000 x 1250 - Length (mm): 2045 - Width (mm): 1740 - Height (mm): 1840 - Weight (approx. kg): 2200 Accessories: - Second knife row - Logspacer Location: Ex stock 54634 Bitburg - immediately available -

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, obratovalne ure: 1 h, Super special price, as the machine was operated during our in-house exhibition. Operating hours: 2 Immediately available – subject to prior sale Once it’s gone, it’s gone! Compact design, high reliability, and excellent value for money: These are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foam, or paper. Special feature: the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput capacity (kg/h): 30-40 Hydraulic oil volume (l): 100 Weight (kg): 530 Equipment: Press Powerful press mechanism with low-wear, chrome-plated jaws Pre-compactor with end-position damped cylinder and bolted cover Control cabinet with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Hnodpfx Astnz Hbjh Dsu Bin with agitator and gearbox motor Screw channel with discharge screw and gearbox motor Accessories: Briquette length monitoring Automatic on/off Location: 54634 Bitburg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Weima Holzhacker - drobilnik za les s potisnim dnom - tiho in počasno delujoč Odlično stanje - le 150 delovnih ur - Tip: WL 600 Premer gredi (mm): 260 Dolžina rezila (mm): 600 Hitrost vrtenja rezilne gredi (obr/min): 80 - 125 Hodpfx Ahjxiq Syj Denu Število rezil (kos): 14 Maks. velikost zrn (mm): 20/25 Odprtina (mm): 600 x 800 Premer sesalne cevi (mm): 160 Moč motorja (kW): 15 Napetost (V): 400 Delovna višina (mm): 1645 D x Š x V (mm): 1.805 x 1.118 x 1.645 Teža (kg): 1100 Lokacija: iz zaloge 54634 Bitburg - na voljo takoj - Vmesna prodaja pridržana.

Stanje: novo, Leto izdelave: 2024, Compact design, high reliability, and an excellent price-performance ratio: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foams, or paper. Special feature: the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput (kg/h): 30-40 Hydraulic oil capacity (l): 100 Weight (kg): 530 Equipment: Press: - High-performance pressing mechanism with low-wear, chrome-plated clamp - Pre-compactor with end-position damped cylinder and bolted lid - Control cabinet with PLC control Hydraulics: - Separate oil tank with pump motor and valve control Hnsdpfx Ajbtnf Eoh Dou - Oil temperature safety switch Tank with agitator and gear motor Screw channel with discharge screw and gear motor Accessories: Briquette length monitoring Automatic On-Off Location: 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, Weima Single-Shaft Shredder Type WL 6 Power: 18.5 kW Our Machine Concept WL 6 Weima high-performance shredders, with their flexible range of applications, can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer waste, etc.) into fuel chips, achieving significant volume reduction of bulky materials. Functionality: The machine is equipped with a large feed hopper, which can be loaded either by conveyor belt or manually. This hopper can be customized according to individual requirements and ensures continuous and cost-effective material feeding without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper capacity: 0.9 m³ Working width of rotor: 800 mm Rotor diameter: 252 mm Drive power: 18.5 kW Rotor speed: 80–120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, reversible cutting crowns Screen perforation: 10–60 mm possible (standard 15–20 mm) Paint: WEIMA standard RAL 2002 / 7016 Connection rating: 400 V ±5% / 50 Hz Weight: approx. 1,600 kg Includes: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) and star-delta starting - Rubber vibration absorber elements - V-rotor (patented) with profile-milled knife pockets - Gear limit switch - Pressure bar - Very robust Weima WAP gearbox Recommended Accessories - Logspacer (self-cleaning hopper) - Second row of knives Hnedpecbtpkjfx Ah Dou Ex-stock 54634 Bitburg - Immediately available -