Veb Wema Zeulenroda nakup rabljenega (20)

Stanje: dober (rabljeno), Maximum pressing force: 10 tons. Operating pressure: 16 MPa Cylinder stroke: 400 mm Downward speed: 100 mm/sec Speed up to: 450 mm/sec Njdpfx Aoydlvkofgocp Power requirement: 5.2 kW Weight: 1.3 tons Clamping table modified! Not the original table!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, skupna višina: 34.500 mm, vgradna višina: 800 mm, skupna širina: 12.500 mm, skupna dolžina: 22.000 mm, globina grla: 800 mm, stiskalna sila: 160 t, širina mize: 900 mm, dolžina mize: 630 mm, obratovalna hitrost: 200 mm/s, skupna masa: 7.000 kg, hitrost vzvratne vožnje: 125 mm/s, širina plošče bata: 700 mm, dolžina plošče bata: 450 mm, vrsta vhodnega toka: trifazni, hod: 500 mm, obratovalni tlak: 160 letvica, pritisk: 250 letvica, kapaciteta rezervoarja za olje: 500 l, moč: 17 kW (23,11 KM), Hidravlična stiskalnica PYE 160 S/1M. Leto izdelave 1984. Proizvajalec VEB Wema Zeulenroda (Nemčija). Stroj po generalnem servisu. Tehnični podatki: Največja stiskalna sila 160 ton. Delovni tlak 16 MPa. Zgornja miza 700 x 450 mm. Spodnja miza 900 x 630 mm. Svetla višina 800 mm. Hod cilindra 500 mm. Hitrost spuščanja 200 mm/s. Hitrost dviganja 125 mm/s. Potrebna moč 17 kW. Količina olja v rezervoarju 500 l. Teža 7000 kg. Višina 3450 mm, dolžina 2200 mm, širina 1250 mm. Stroj v zelo dobrem stanju. Ogled in preizkus delovanja stroja je možen. Ncsdpfjqy E I Rex Afgep

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, skupna višina: 3.700 mm, skupna širina: 1.250 mm, skupna dolžina: 2.200 mm, globina grla: 800 mm, stiskalna sila: 250 t, širina mize: 900 mm, dolžina mize: 630 mm, obratovalna hitrost: 200 mm/s, skupna masa: 8.000 kg, hitrost vzvratne vožnje: 110 mm/s, širina plošče bata: 750 mm, dolžina plošče bata: 450 mm, hod: 500 mm, kapaciteta rezervoarja za olje: 500 l, Hidravlična stiskalnica PYE 250 SS. Proizvajalec: WMW VEB Zeulenroda (Nemčija), leto 1985. Parametri: Maksimalna sila stiskanja 250 ton. Obratovalni tlak 18,6 MPa. Zgornja miza 750x450 mm. Spodnja miza 900x630 mm. Svetla višina 800 mm. Hod batnice 500 mm. Hitrost navzdol 200 mm/s. Hitrost navzgor 220 mm/s. Potrebna moč 24 kW. Teža 8500 kg. Višina 3680 mm, dolžina 2200 mm, širina 1250 mm. Tehnično stanje stroja zelo dobro. Stroj je po generalnem pregledu. Nsdpfx Asvcb Tlsfgocp

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: nepreverjeno, številka stroja/vozila: 053-497, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, CNC Machining Center Manufacturer: Werkzeugmaschinenfabrik Vogtland GmbH Model: HPC FLEX-V100 (Special Purpose Machine) Year of Manufacture: 2005 Serial Number: 053-497 CNC special-purpose machine model HPC FLEX-V100 from Werkzeugmaschinenfabrik Vogtland. The system is designed as a single-spindle machining module with horizontal/vertical machining and an automatic pallet changing system, developed specifically for machining bearing cages. The machining unit is based on a combination of two NC rotary tables (A and B axis), allowing various machining positions and indexing angles. Using the 2-axis combination, a pallet with a clamping fixture is swiveled from the loading position into the machining position. Loading is handled by an automatic pallet changer with a separate pallet entry station. Direct loading within the workspace is not provided by design. The system comes with comprehensive peripherals, including a coolant system with high pressure unit, chip conveyor, hydraulic power unit, recooling unit, centralized lubrication system as well as oil and emulsion mist extraction. Machine control is handled via Siemens SINUMERIK 840D. Used industrial special-purpose machine from a production environment. The system is fully assembled and equipped with comprehensive peripherals. Visually, it shows age and use-appropriate wear within the workspace. Inspection by appointment. Dismantling, loading and transport are the responsibility of the buyer. Technical Data • Dimensions (L × W × H): approx. 14,900 × 8,100 × 4,800 mm • Total weight: approx. 85 t • Maximum transport unit: approx. 18 t • Number of machining stations: 1 • Machine output: approx. 1 workpiece/hour (depending on type) Machining • Workpieces: various bearing cages • Material: CuZn40Pb2 • Operations: drilling, tapping, milling, facing, brushing Workpiece Clamping • Manufacturer: RAKO GmbH • Version: 12-jaw chuck • Operation: manual, using a screwdriver • Pallet size: 1250 × 1250 mm Control and Drives • CNC control: Siemens SINUMERIK 840D • System control: Siemens S7 • NC axis drives: Siemens 1FT6 • Main spindle: KESSLER DMS132.AL.4.FFS • Drive controller: Siemens SIMODRIVE 611D Electrical Data • Operating voltage: 400 V • Frequency: 50 Hz • Rated current: 300 A • Connected load: 150 kW • Control voltage: 24 V DC Hydraulic System • Manufacturer: Parker Hannifin GmbH • Hydraulic oil: HLP 46 Ncsdpfxeyt I I Us Afgsp • Tank volume: 90 l • Max. pressure: 130 bar Pneumatics • Operating pressure: 6 ± 0.6 bar • Air consumption: approx. 300 m³/h Central Lubrication • Manufacturer: Willy Vogel AG • Model: MFE5-KW6-S1+299 • Lubricant: CGLP 220 • Lubrication cycle: every 10 min • Tank volume: 6 l Coolant System • Manufacturer: MANN + HUMMEL • Filtration unit: K90 L T63-PF750D-T-ND-SSP • Supply rate: 500 l/min at 4.4 bar (10 µm filter) High Pressure System • Manufacturer: MANN + HUMMEL • High pressure: 80 bar • Supply rate: 50 l/min • Pump: ALLWEILER Chip Disposal • Scraper belt conveyor with discharge unit • Delivery rate: 550 l/min at 1.3 bar Extraction • Manufacturer: IFS Industriefilter GmbH • Model: IFM 2000 Recooling Unit • Manufacturer: BKW GmbH • Model: WRK30-2KK2P • Capacity: 8 kW Pallet Changer • Manufacturer: Fördertechnik Mayer GmbH & Co. KG • Model: F.M. 2667-0

Stanje: rabljeno, Leto izdelave: 2009, Maximum internal diameter: 600 mm Maximum grinding depth: 800 mm Maximum grinding length: 600 mm Control system: Siemens 840 D Maximum internal grinding diameter: 600 mm Ncedpfx Afowp S Tnjgop Maximum external grinding diameter: 800 mm Maximum workpiece length: 380 mm Maximum external grinding length: 600 mm Travel - X1 axis: 150 mm Travel - Z1 axis: 1100 mm Travel - X2 axis: 470 mm Travel - Z2 axis: 800 mm Workpiece spindle power: 8.5 kW Speed range - stepless: 1–795 rpm Equipment / Accessories: Workpiece spindle unit (U/B1/L adjustment): - Travel (U-axis): 300 mm - Swivel angle (B1-axis): -0.5°/+12° - Workpiece spindle drive power: 8.5 kW - Speed range (infinitely variable): 1–795 rpm - Setup speed (jog mode): 10 rpm - Spindle nose size A8 according to DIN 55026 - Spindle bore: 58.5 mm - Maximum workpiece diameter: 830 mm - Maximum workpiece length (loose clamping): 800 mm - Maximum workpiece length (between centers): 800 mm - Maximum spindle head load capacity: 6,100 N Internal grinding attachment (Z1/X1/B2): - Travel (Z1-axis): 1100 mm - Travel (X1-axis): 150 mm - Swivel angle (B2-axis): 270° - Manual longitudinal adjustment of internal grinding axis on table: 780 mm - Internal grinding spindle drive power (steplessly adjustable), belt-driven grinding spindles: 7.5 kW - Grinding spindle mounting bore (diameter): 100 mm / 125 mm - Grinding spindle mounting length: 220 mm - Maximum grinding diameter: 600 mm - Maximum grinding depth: 800 mm External and face grinding attachment (Z2/X2): - Travel (Z2-axis): 800 mm - Travel (X2-axis): 470 mm - Swivel angle (B2-axis): 270° - External grinding spindle drive power: 7.5 kW - Grinding spindle mounting bore: Ø 140 mm - Maximum grinding diameter: 800 mm - Maximum grinding length: 600 mm - Grinding wheel dimensions: max. Ø 450 x 50 x Ø 127 mm

Stanje: rabljeno, Technical Details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total power requirement: 72 kW Approximate machine weight: 18.0 t Machine dimensions (LxWxH): 2100 x 3400 x 2600 mm Control cabinet dimensions: No. 1: LxWxH: 1000 x 850 x 2300 mm No. 2: LxWxH: 1250 x 850 x 2500 mm No. 3: LxWxH: 1000 x 850 x 2100 mm No. 4: LxWxH: 1000 x 500 x 2350 mm Required floor space approx. (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER MACHINE with 3 workstations and 15 drilling and milling spindles E.g., suitable for the production of large batches of fittings Further technical specifications: - Workpiece carrier: Drum-type workpiece holder, Ø 800 mm, for 8 workpiece clamping stations, cycle time 10 sec. Nedpfou Idvwex Afgjcp - Drilling and milling unit: SK 40 tool holder; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; maximum speed 2240 rpm - Left side: 3x drilling/milling and drilling spindles, 2x tapping spindles - Right side: 2x drilling/milling spindles, 2x tapping spindles and 1x U-axis, plus radially 2x movable tapping spindles, 2x drilling/milling spindles (one of which is movable), and 1x movable U-axis - 1st tapping unit: SK 40 tool holder; quill diameter 125 mm; working stroke 125 mm; speed 35.5 – 900 rpm; right/left rotation - 2nd tapping unit: SK 40 tool holder; quill diameter 125 mm; working stroke 80 mm; speed 45 – 560 rpm; right/left rotation Equipment: - 2 hydraulic units - Chip conveyor - Belt filter by Filtertechnik Gera (fleece belt 430 mm) - Operator panel - Manual pulse generator as is.

Stanje: rabljeno, Technical Details: Ncsdpfju Idxfex Afgep Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Machine weight approx.: 17.0 t Total power requirement: 83.0 kW Machine dimensions (LxWxH): 2400 x 2800 x 2800 mm Control cabinet dimensions: No. 1: LxWxH: 1000 x 850 x 2350 mm No. 2: LxWxH: 1250 x 650 x 2230 mm No. 3: LxWxH: 650 x 600 x 1700 mm No. 4: LxWxH: 1000 x 500 x 1350 mm Space requirement approx. (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER MACHINE with 3 work stations and 15 drilling and milling spindles For example, suitable for the production of industrial fittings in high quantities (see photos) Further technical specifications of the machine: - Workpiece carrier: workpiece drum Ø 800 mm for 8 workpiece clamping stations, cycle time 10 sec. - Drilling/milling unit: SK 40 interface; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Right side: 3x drilling and milling spindles, 1x tapping spindle, 1x U-axis, as well as 2x radially adjustable drilling and milling spindles, 1x radially adjustable tapping spindle and 2x radially adjustable U-axes - Left side: 3x drilling and milling spindles, 1x tapping spindle, 1x U-axis, as well as 2x radially adjustable drilling and milling spindles, 1x radially adjustable tapping spindle and 2x radially adjustable U-axes - 1st tapping unit: SK 40 interface; quill Ø 125 mm; working stroke 125 mm; speed 35.5 – 900 rpm; right/left rotation - 2nd tapping unit: SK 40 interface; quill Ø 125 mm; working stroke 80 mm; speed 45 – 560 rpm; right/left rotation Features: - 2 hydraulic power units - Chip conveyor - Belt filter by Filtertechnik Gera (conveyor width 430 mm) - Operator panel - Handheld control pendant This machine is not connected. Sale as is! Subject to prior sale.

Stanje: rabljeno, Technical details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total connected load: 72 kW Approx. machine weight: 18.0 t Machine dimensions (LxWxH): 2100 x 3400 x 2600 mm Control cabinet dimensions: No. 1: LxWxH: 1000 x 850 x 2300 mm No. 2: LxWxH: 1250 x 850 x 2500 mm No. 3: LxWxH: 1000 x 850 x 2100 mm No. 4: LxWxH: 1000 x 500 x 2350 mm Required space approx. (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER MACHINE with 3 working stations and 15 drilling and milling spindles, e.g. for the production of larger quantities of fittings Further technical specifications: - Workpiece carrier: Workpiece holding drum Ø 800 mm for 8 workpiece clamping stations; indexing time 10 sec. - Drilling and milling unit: SK 40 taper; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Left: 3x drilling-milling spindles and drilling spindles, and 2x tapping spindles - Right: 2x drilling-milling spindles, 2x tapping spindles and 1x U-axis; plus radially adjustable 2x tapping spindles, 2x drilling-milling spindles (one adjustable), and 1x U-axis (adjustable) - 1st tapping unit: SK 40 taper; quill Ø 125 mm; working stroke 125 mm; speed 35.5–900 rpm; right/left - 2nd tapping unit: SK 40 taper; quill Ø 125 mm; working stroke 80 mm; speed 45–560 rpm; right/left Equipment: - 2 hydraulic power units - Chip conveyor - Belt filter by Filtertechnik Gera (nonwoven belt 430 mm) - Operating panel - Hand-held control unit Ncedpfxeu Idv Ds Afgsp in good condition.

Stanje: rabljeno, Technical details: Number of spindles: 15 units Number of stations: 8 units Ncjdpfxeu Idxro Afgop Control system: PS 2000 Total power requirement: 83.0 kW Machine weight approx.: 17.0 t Space requirements approx. (LxWxH): 5.0 x 6.2 x 3.8 m Machine dimensions (LxWxH): 2400 x 2800 x 2800 mm Control cabinet dimensions: No. 1: LxWxH: 1000 x 850 x 2350 mm No. 2: LxWxH: 1250 x 650 x 2230 mm No. 3: LxWxH: 650 x 600 x 2300 mm No. 4: LxWxH: 1300 x 650 x 2350 mm TRANSFER AUTOMAT with 3 work stations and 15 drilling/milling spindles For example, for the production of fittings in larger quantities Further technical specifications: - Workpiece carrier: Workpiece holding drum Ø 800 mm for 8 clamping stations, cycle time 10 sec. - Drilling/milling unit: SK 40 tool holder; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Right: 4x drilling and milling spindles with 18 speeds and 1x hydraulic thread cutting spindle, 14 – 224 rpm - Left: 4x drilling and milling spindles with 18 speeds and 1x hydraulic thread cutting spindle, 14 – 224 rpm; radial 3x drilling and milling spindles, including 1x U-axis and 1x thread cutting spindle - 1st thread cutting unit: SK 40 holder; quill Ø 125 mm; working stroke 125 mm; speed 35.5 – 900 rpm; right/left rotation - 2nd thread cutting unit: SK 40 holder; quill Ø 125 mm; working stroke 80 mm; speed 45 – 560 rpm; right/left rotation Equipment: - 2 hydraulic power units - Chip conveyor system - Belt filter by Filtertechnik Gera (fleece belt 430 mm) - Control panel - Hand-held selector switch in process.

Stanje: novo, VKM supplies spare parts for VKM and Oswald’s complete product range, as well as selected Bezner-Oswald and Wema Probst machines, BÖGLI band saws, and replacement knives manufactured according to drawing specifications for various woodworking machines. Some parts are available directly from stock. Below, you’ll find a selection of our most frequently requested parts: Centering roller, 40 mm bore €112.00/each Centering roller, 50 mm bore €156.00/each Feed roller, 40 mm bore €118.00/each Feed roller, 50 mm bore €138.00/each Outfeed roller, 40 mm bore €102.00/each Feed roller, 50 mm bore €126.00/each Bezner WP35 peeling disc €3,920.00/each Ncsdeg Rn Avspfx Afgep Oswald RM162 slide carriage RM7072W €302.00/each Oswald RM162 knife carrier RM7066W €215.00/each We are happy to provide a formal quotation including terms and conditions upon request. Additional spare parts available on inquiry.

Stanje: novo, Leto izdelave: 2025, VKM supplies spare parts for VKM and Oswald’s complete product range, as well as selected Bezner-Oswald and Wema Probst machines, BÖGLI band saws, and replacement knives manufactured to drawing for a wide variety of woodworking machines. Certain parts are available from stock. Below you will find a selection of parts that are particularly in high demand: Centering rollers, bore 40mm: €112.00/piece Centering rollers, bore 50mm: €156.00/piece Nedpfjwagxmox Afgocp Feed roller, bore 40mm: €118.00/piece Feed roller, bore 50mm: €138.00/piece Take-off roller, bore 40mm: €102.00/piece Feed roller, bore 50mm: €126.00/piece Bezner WP35 peeling disc: €3,920.00/piece Oswald RM162 guide carriage RM7072W: €302.00/piece Oswald RM162 knife holder RM7066W: €215.00/piece We are pleased to provide a quotation including commercial terms. Further spare parts available upon request.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Wema Probst QF50 cross-processing machine Ncsdewc Tdnspfx Afgsp Cross milling machine for processing round timber, featuring a tilting table for setting the milling angle. 2x processing stations 1x cross-milling unit 1x drilling unit

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Wema Probst RHM 250 II-H Fräsmaschine NEU - Durchmesser von 100 mm bis 250 mm Njdsubbryjpfx Afgocp - Elektronische Vorschubregelung - 2 Fräsköpfe - Kopf 1 = Durchmesser 150–300 mm - Kopf 2 = Durchmesser 100–250 mm - Vorschubgeschwindigkeit 6–34 m/min - kompletter Schaltschrank + Bedienpult

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, obratovalne ure: 308.181 h, Funkcionalnost: popolnoma funkcionalen, Stroj: WEMA PROBST RHM (Druga generacija) Leto izdelave: okoli 1999 Premer lesa: 30 ‒ 120 mm Glavni motor (rezanje): 15 kW / 380 V Pogonski motorji: 1,5 kW Skupna moč: cca 17 kW Stanje: Odlično delovno in vizualno stanje Dodatno: Več kompletov povsem novih nožev vključenih Lokacija: Bolgarija, Vrani kon 7940 Nsdpeydmp Sjfx Afgocp Cena: Po dogovoru Možen je prikaz na lokaciji!

Stanje: rabljeno, Wema Probst profile milling machine Main motor: 11 kW Dismantled and ready for loading Njdpfx Afec N N U Nogecp

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), Destacking unit for small-diameter timber and posts Ncjdpfx Ajwqdc Rjfgjp for RH milling machines or other applications. Comprising: inclined infeed with retaining hooks. Disc singulation/cascade system with 3 singulation stages. Timber lengths from 0.3 m to 5.5 m. Timber diameters up to approx. 12 cm. Ready for demonstration.

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Destacking unit for small-diameter timber and posts Njdpfjwqf S Hox Afgjcp for RH milling machines or other applications. Comprising: inclined infeed with retaining hooks. Disc singulation/cascade system with 3 singulation stages. Timber lengths from 0.3 m to 5.5 m. Timber diameters up to approx. 12 cm. Ready for demonstration.

Stanje: zelo dobro (rabljeno), Premer olupitvenega diska: 600 mm Ncodpfxsxz Unpe Afgjp Število nožev: 6 Napetost: 380 V, 50 Hz Pogonska moč: 11 kW

Leto izdelave: 2020, stanje: rabljeno, No. 3233 Cross Drilling Machine Wema Probst QBV 200 Used, year of manufacture 2020 The machine is in like-new condition, with fewer than 30 drilling operations performed. Designed for making transverse milling and drilling in round milled or profiled timber. With this machine, you can create form-fit joints in round timber with three-dimensional manual adjustment. Application areas include corner joints for log houses, timber frame constructions, or products in the "Timber in the Garden" segment such as fences, carports, planters, raised beds, guardrails, and more. The cross drilling machine consists of a base frame in welded steel construction with a swivelling drilling unit and gas-spring-assisted drilling column, as well as an adjustable drilling column position. The workpiece is clamped using two centering vices. With the special tool (circular saw), asymmetric or end-face machining can also be performed. The machine also allows for 90° holes of up to 120 mm diameter in timber using flat wood drill bits. Accessories: Collet chuck with 25 mm diameter for tool holding, without tools included Wood diameter: 60 - 200 mm Adjustment range of the tool: +/- 60° for 60 mm diameter / +/- 45° for 80 mm – 140 mm diameter / +/- 30° for 160 mm – 200 mm diameter Motor power: 2.2 kW Speed: 1200 rpm Operating voltage: 400 V / 50 Hz Transport dimensions approx. 1200 x 1400 x 2400 mm (LxWxH) Weight approx. 380 kg Sale on behalf of customer, ex location near 46026 Valencia (Spain), without dismantling, transport, and assembly Dismantling, loading, and transport by us available as an option Subject to errors in description and price To avoid possible misunderstandings, a viewing on site is possible and recommended by prior appointment Sale as-is Nodswt Abwepfx Afgjcp Technical data, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: "purchased as seen" Images and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex works location

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, 1 - Loading of logs 2 - Infeed to the cylinder 3 - Cylinder The resulting log diameter is 75–200 mm Minimum input material length: 1100 mm 15 kW cutterhead drive motor Infinitely variable feed speed adjustment + forward/reverse + 1.7 kW feed motor Simultaneously: 2+ toothed chain sprocket rollers 4+ cutterheads 2+ smooth feed rollers Electrically adjustable cutterhead 0.25 kW Electrically adjustable axes 1.1 kW Dimensions (L/W/H): 3570 x 1300 x 1700 mm Weight approx. 4000 kg Ncodpfethqqmox Afgep 4-cylinder outlet