Prenosni stroj

WEMA Vogtland BTrPi 900/8

Stanje: rabljeno, Technical Details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total power requirement: 72 kW Approximate machine weight: 18.0 t Machine dimensions (LxWxH): 2100 x 3400 x 2600 mm Control cabinet dimensions: No. 1: LxWxH: 1000 x 850 x 2300 mm Kodpfxsu Idvws Ai Nodp No. 2: LxWxH: 1250 x 850 x 2500 mm No. 3: LxWxH: 1000 x 850 x 2100 mm No. 4: LxWxH: 1000 x 500 x 2350 mm Required floor space approx. (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER MACHINE with 3 workstations and 15 drilling and milling spindles E.g., suitable for the production of large batches of fittings Further technical specifications: - Workpiece carrier: Drum-type workpiece holder, Ø 800 mm, for 8 workpiece clamping stations, cycle time 10 sec. - Drilling and milling unit: SK 40 tool holder; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; maximum speed 2240 rpm - Left side: 3x drilling/milling and drilling spindles, 2x tapping spindles - Right side: 2x drilling/milling spindles, 2x tapping spindles and 1x U-axis, plus radially 2x movable tapping spindles, 2x drilling/milling spindles (one of which is movable), and 1x movable U-axis - 1st tapping unit: SK 40 tool holder; quill diameter 125 mm; working stroke 125 mm; speed 35.5 – 900 rpm; right/left rotation - 2nd tapping unit: SK 40 tool holder; quill diameter 125 mm; working stroke 80 mm; speed 45 – 560 rpm; right/left rotation Equipment: - 2 hydraulic units - Chip conveyor - Belt filter by Filtertechnik Gera (fleece belt 430 mm) - Operator panel - Manual pulse generator as is.

Stanje: rabljeno, Leto izdelave: 2008, Technical details: Workpiece diameter - max.: 29 mm Workpiece diameter - min.: 26 mm Workpiece length: 66 mm The system was originally supplied for the following workpiece dimensions: Diameter 26 mm - 29 mm Length 65 mm - 66 mm By using interchangeable parts in the clamping device, handling, etc., diameters up to approx. Ø50 mm should be feasible. An overall length of nearly 400 mm should be possible with some modifications. Kdedpfx Ajlqac Ssi Njp This also depends on tool lengths, machining lengths on the component, etc.

Stanje: rabljeno, Technical Details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Machine weight approx.: 17.0 t Total power requirement: 83.0 kW Machine dimensions (LxWxH): 2400 x 2800 x 2800 mm Control cabinet dimensions: No. 1: LxWxH: 1000 x 850 x 2350 mm No. 2: LxWxH: 1250 x 650 x 2230 mm No. 3: LxWxH: 650 x 600 x 1700 mm No. 4: LxWxH: 1000 x 500 x 1350 mm Space requirement approx. (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER MACHINE with 3 work stations and 15 drilling and milling spindles For example, suitable for the production of industrial fittings in high quantities (see photos) Further technical specifications of the machine: - Workpiece carrier: workpiece drum Ø 800 mm for 8 workpiece clamping stations, cycle time 10 sec. - Drilling/milling unit: SK 40 interface; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Right side: 3x drilling and milling spindles, 1x tapping spindle, 1x U-axis, as well as 2x radially adjustable drilling and milling spindles, 1x radially adjustable tapping spindle and 2x radially adjustable U-axes - Left side: 3x drilling and milling spindles, 1x tapping spindle, 1x U-axis, as well as 2x radially adjustable drilling and milling spindles, 1x radially adjustable tapping spindle and 2x radially adjustable U-axes Kdodpeu Idxfefx Ai Njp - 1st tapping unit: SK 40 interface; quill Ø 125 mm; working stroke 125 mm; speed 35.5 – 900 rpm; right/left rotation - 2nd tapping unit: SK 40 interface; quill Ø 125 mm; working stroke 80 mm; speed 45 – 560 rpm; right/left rotation Features: - 2 hydraulic power units - Chip conveyor - Belt filter by Filtertechnik Gera (conveyor width 430 mm) - Operator panel - Handheld control pendant This machine is not connected. Sale as is! Subject to prior sale.

Stanje: rabljeno, Technical details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total power requirement: 83.0 kW Machine weight approx.: 17.0 t Space requirements approx. (LxWxH): 5.0 x 6.2 x 3.8 m Machine dimensions (LxWxH): 2400 x 2800 x 2800 mm Control cabinet dimensions: No. 1: LxWxH: 1000 x 850 x 2350 mm No. 2: LxWxH: 1250 x 650 x 2230 mm No. 3: LxWxH: 650 x 600 x 2300 mm No. 4: LxWxH: 1300 x 650 x 2350 mm TRANSFER AUTOMAT with 3 work stations and 15 drilling/milling spindles For example, for the production of fittings in larger quantities Further technical specifications: - Workpiece carrier: Workpiece holding drum Ø 800 mm for 8 clamping stations, cycle time 10 sec. - Drilling/milling unit: SK 40 tool holder; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Right: 4x drilling and milling spindles with 18 speeds and 1x hydraulic thread cutting spindle, 14 – 224 rpm - Left: 4x drilling and milling spindles with 18 speeds and 1x hydraulic thread cutting spindle, 14 – 224 rpm; radial 3x drilling and milling spindles, including 1x U-axis and 1x thread cutting spindle - 1st thread cutting unit: SK 40 holder; quill Ø 125 mm; working stroke 125 mm; speed 35.5 – 900 rpm; right/left rotation - 2nd thread cutting unit: SK 40 holder; quill Ø 125 mm; working stroke 80 mm; speed 45 – 560 rpm; right/left rotation Equipment: - 2 hydraulic power units - Chip conveyor system - Belt filter by Filtertechnik Gera (fleece belt 430 mm) - Control panel Ksdpfxsu Idxrj Ai Nodp - Hand-held selector switch in process.

Stanje: pripravljen za uporabo (rabljen), Length: 8,225 mm, width: 3,200 mm, complete with documentation. Kedpfx Aiji Ew Dpo Nodp

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1987, Usata Giddings & Lewis Modello MC 50 Twin Pallet Centro di Lavoro Orizzontale con Mandrino Motorizzato, Cambio Utensili Automatico a 60 posizioni e Controllo G&L 8000A. Numero di serie: 445-1052. Anno di costruzione: 1987. Macchina precedentemente installata presso Rolls Royce Plc a Derby, Regno Unito. Disponibile immediatamente per la vendita e attualmente situata in Belgio, dove è possibile visionarla. Diametro mandrino – 130 mm Cono mandrino – ISO 50 Corsa mandrino (asse Z) – 915 mm Velocità mandrino (4 gamme) – 5 a 1500 giri/min Motore principale – 30 HP Dimensioni pallet – 1219 x 1245 mm Kjdpfx Aeu Dahnsi Nsdp Rotazione pallet – incrementi di 0,001°, 360.000 posizioni Portata massima pallet con cambiopallet – 5.000 kg Portata massima pallet senza APC – 9.000 kg Corsa longitudinale (W) – 1.700 mm Corsa verticale testa (Y) – 1.500 mm Corsa trasversale (X) – 1.800 mm Avanzamenti – da 1 mm/min fino a rapido Avanzamento rapido (X e Y) – 4.500 mm/min Avanzamento rapido (Z e W) – 3.000 mm/min Cambio utensili automatico – 60 posizioni Alimentazione elettrica – 415V, 3Ph, 50Hz CARATTERISTICHE E DOTAZIONI Refrigerazione interna ad alta pressione (25 Bar) attraverso il mandrino, macchina di alta precisione. Macchina precisa, ben mantenuta e regolarmente calibrata dal costruttore. Sonda di misura Renishaw. Dimensioni: Lunghezza – 11.679 mm, Larghezza – 6.502 mm, Altezza – 4.423 mm Peso – 40.329 kg

Stanje: rabljeno, Leto izdelave: 1997, Stations: 10 / 22 Tool holder: SK 40 Control: SIEMENS SIMATIC OP 3 Total power requirement: approx. 130 kW = Transfer machine Indexing drum with 10 workpiece stations, 22 machining units (drilling: 10 units, drilling & tapping: 5 units; drilling & countersinking: 3 units; drilling, countersinking & tapping: 1 unit; tapping: 3 units), Tool holders: SK 40 for each unit, motor power per unit between 4.5 and 5.5 kW, Kjdpfx Aietqqlre Njdp SIEMENS control: SIMATIC OP 3, loading robot: ABB Accessories: chuck (without jaws), chip conveyor, coolant system

Stanje: rabljeno, Leto izdelave: 2001, Stations: 10 / 22 Tool Holder: SK 40 Control: SIEMENS SIMATIC OP 3 Kjdpfx Aotqqlqji Njdp Total Power Requirement: approx. 112 kW = Transfer Machine Drum-type indexing table with 10 workpiece stations, 22 machining units (Drilling: 7 units, Drilling & Tapping: 8 units, Drilling & Countersinking: 5 units, Drilling, Countersinking & Tapping: 2 units), each with SK 40 tool holders, motor power per unit between 4.0 and 4.5 kW, SIEMENS control system SIMATIC OP 3, equipped with an ABB loading robot. Accessories: Chuck (without jaws), chip conveyor, coolant system.

Stanje: rabljeno, 2x Pfiffner RT 100 Description: Rotary Indexing Table / Spindles: - Clamping Stations: 12 motorized spindles - Drive: Torque drive, water cooled - Position Measuring System: Direct - Indexing Time: 1.5 seconds Kdodpfxew Si T Ao Ai Njp - Spindles: Water-cooled motor spindles - C-Axes: 0.001°, hydraulically clamped - Speed: 5,500 rpm - Power: 11 kW - Clamping Device: Chuck Base Modules: - Technology: Positioning module, 3-axis - X-Axis: 50 mm - Y-Axis: 100 mm - Z-Axis: 100 mm - Measuring Systems: Direct on all axes - Coolant Supply: Integrated Max. Workpiece Size: 100 x 100 x 100 mm Station 1: - Horizontal: Raw part infeed (indexing conveyor + Stäubli robot) - Vertical: Raw part measurement Station 2: - Horizontal: 4-position turret, non-driven - Vertical: Remeasure clamping error (C-axis homing) Station 3: - Horizontal: 4-position turret, non-driven - Vertical: Not equipped Station 4: - Horizontal: 4-position turret, non-driven - Vertical: Not equipped Station 5: - Horizontal: 6-position turret with WAN, 10,000 rpm - Vertical: 6-position turret with WAN, 10,000 rpm Station 6: - Horizontal: 4-position turret, non-driven - Vertical: Not equipped Station 7: - Horizontal: Not equipped - Vertical: 6-position turret with WAN, 10,000 rpm Station 8: - Horizontal: 6-position turret with WAN, 10,000 rpm - Vertical: Not equipped Station 9: - Horizontal: 4-position turret, non-driven - Vertical: Not equipped Station 10: - Horizontal: 6-position turret with WAN, 10,000 rpm - Vertical: Not equipped Station 11: - Horizontal: 6-position turret with WAN, 10,000 rpm - Vertical: 6-position turret with WAN, 10,000 rpm Station 12: - Horizontal: Loading/unloading device with dual swing gripper + discharge conveyor Equipment / Accessories: - Chip Management: Chip conveyor - High Pressure System: 50 bar - Tool Monitoring: ARTIS breakage control - Raw Material Supply: Infeed belt with robot - Finished Parts Removal: Discharge belt with 3-way diverter - Oil Mist Separator: Electrostatic filter - Fire Extinguishing System: Kraft und Bauer - Part Marking: Laser - Part Cleaning: HESO cleaning system

Stanje: dober (rabljeno), Leto izdelave: 2002, Gre EUBAMA S6, letnik 2002. Število vpenjalnih (čeljustnih) postaj: 8 Sistem dvoceljustnih vpenjal: da Kdedpfxov Ef N As Ai Nsp Maksimalni premer vpenjanja: 40 mm Maksimalna dolžina obdelovanca: 330 mm Maksimalni izhod (ciklov/min): 40 Hidravlični vpenjalni sistem Nadzor stroja: CNC Siemens SINUMERIK Število obdelovalnih enot: 15 FMB MT/42/4200/B linijski magazin Kapaciteta nalaganja magazina: 4,2 metra KNOLL transporter za odrezke KNOLL rezervoar za hladilno vodo (VRF 250/1250) Stroj je v delujočem stanju.