Prenosni stroj

EUBAMA S6

Leto izdelave: 2006, Stanje: pripravljen za uporabo (rabljen), Ta rotacijska transferna naprava EUBAMA S6 je bila izdelana leta 2006. Odlikuje jo robustno osnovno ogrodje, hidravlični priključki, servo motor Stöber s planetnim menjalnikom ter rezkalna enota z NC pomikom. Idealno za precizno delo, vključuje tudi čelno stružno glavo in sistem za nadzor dolžine s pnevmatskim cilindrom in laserjem. Za več informacij o stroju nas kontaktirajte. Uporaba Druge obdelovalne naprave Ncedpfx Abex D If Tebsl

Stanje: rabljeno, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gear Year of manufacture: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - Last used for round tube Ø 15.4 x 0.8 mm, R 60 mm - Bending tools and bending dies are interchangeable - Drive of the bending tool via AC servo motor and Alpha helical gear, planetary gear - 2-piece bending tool opens and closes via hydraulic lifting movement - MERKLE hydraulic round block cylinder, type 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending die via Festo pneumatic cylinder - Without electrical control system - Without hydraulic power unit Dimensions (L/W/H): 760 x 400 x 150 mm Ncsdpfjd E A I Iox Abbol Weight: approx. 60 kg Good condition Dismantled from a fully functional special-purpose machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Type: 1FK6061-7AF71-1EG0 Rated torque = MO: 6.4 Nm Rated current = Io: 6.1 A Max. speed = n. max.: 5,500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 units in right-hand version available. 5 units in left-hand version available. The stated price refers to one bending unit with servo motor. Upon request, we also sell individual subassemblies of the bending unit. We also offer electrical components for servo motor control. Hydraulic power units are also available.

Stanje: dober (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, STAR SH-12 CNC Sliding Headstock Automatic Lathe TECHNICAL DATA Turning diameter: 13 mm Headstock stroke: 140 mm Spindle speed: 400 – 10,000 rpm Spindle power: 1.5 kW Ncjdpfx Abovllmhsbjl Number of tools: 5 Number of tools in the turret: 3 Machine dimensions: 1500 x 950 x 1650 mm Weight: Approx. 950 kg SCOPE OF SUPPLY Includes (non-exhaustive list): - STAR SH-12 CNC automatic lathe - Bar feeder - Coolant pump - Transformer For the exact scope of supply, please refer to the photos. We do not assume any liability for the accuracy, completeness or timeliness of the information provided.

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6 - Max. diameter: 32 mm - Spindle speed: 6300 rpm - Slide unit 1.1: X and Z axes CNC controlled Nsdpjuhatpefx Abbscl - Slide unit 1.2: X and Z axes CNC controlled - Slide unit 2.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled with counter spindle - Slide unit 6.2: X and Z axes CNC controlled EQUIPMENT - SIEMENS 840D CNC - Counter spindle - Polygon turning attachment: Slide unit 5.1 - Bar feeder: IEMCA SIR MS32/33 P - Coolant tank: KNOLL * with high-pressure pump - Chip conveyor: KNOLL - Cooling unit - Parts removal - Parts ejector - Fire protection system: KRAFT UND BAUER * NB: Functionality not guaranteed. Inspection by a qualified company of the buyer is recommended.

Stanje: rabljeno, Leto izdelave: 2008, Technical details: Workpiece diameter - max.: 29 mm Workpiece diameter - min.: 26 mm Ncsdpfx Abelqac Sebel Workpiece length: 66 mm The system was originally supplied for the following workpiece dimensions: Diameter 26 mm - 29 mm Length 65 mm - 66 mm By using interchangeable parts in the clamping device, handling, etc., diameters up to approx. Ø50 mm should be feasible. An overall length of nearly 400 mm should be possible with some modifications. This also depends on tool lengths, machining lengths on the component, etc.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 750 kg, potovalna razdalja osi X: 350 mm, pomik osi Y: 220 mm, pomik po osi Z: 220 mm, skupna višina: 2.154 mm, skupna dolžina: 2.050 mm, skupna širina: 2.234 mm, višina obdelovanca (maks.): 220 mm, širina obdelovanca (maks.): 550 mm, dolžina obdelovanca (maks.): 800 mm, skupna masa: 2.450 kg, trajanje garancije: 6 meseci, GF Machining Solutions CUT P350 Leto izdelave: 2020 Krmiljenje: AC CUT HMI-2 Pomiki (X / Y / Z): 350 x 220 x 220 mm Pomiki (U / V): 350 x 220 mm Maks. kot koničenja: +/- 30° pri višini 200 mm Integrirana zaščita pred trkom (ICP) na vseh 5 oseh Maksimalne dimenzije obdelovanca: 800 x 550 x 220 mm Maksimalna teža obdelovanca: 750 kg Hitrost rezanja: 400 mm²/min Najboljša površina: Ra 0,08 µm Razpoložljivi premeri žice: 0,15 mm do 0,33 mm Dimenzije celotnega sistema: 2050 x 2234 x 2154 mm Skupna teža sistema: 2450 kg Po prejemu naročila bomo stroj očistili, generalno obnovili in preverili delovanje vseh funkcij. Z veseljem vam ponudimo zagon stroja in uvajanje v upravljanje krmiljenja. Nodsxywz Aspfx Abbocl

Stanje: potreben popravila (rabljeno), Leto izdelave: 2001, Funkcionalnost: nefunkcionalno, automatic machine needs repair lathe + Triton loader Ncjdpfov Im U Sox Abbsl

Stanje: dober (rabljeno), Leto izdelave: 1980, Pick-off devices for rear-side machining, automatic lathes Schütte - Pittler 1x for up to 36 mm 1x for up to 42 mm 1x for up to 50 mm 1x slotting head Complete with base plate and drive shaft. Ncodpfxotthkdo Abbjl

Stanje: rabljeno, Article: Cams Brand: Schütte For Schütte multi-spindle automatic lathes, F- and G-type, various sizes Please contact us for further information and images via email(at) or Ncsdpfx Abjn H Nzfsbel

Stanje: rabljeno, Technical details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total connected load: 72 kW Approx. machine weight: 18.0 t Machine dimensions (LxWxH): 2100 x 3400 x 2600 mm Control cabinet dimensions: No. 1: LxWxH: 1000 x 850 x 2300 mm No. 2: LxWxH: 1250 x 850 x 2500 mm No. 3: LxWxH: 1000 x 850 x 2100 mm No. 4: LxWxH: 1000 x 500 x 2350 mm Required space approx. (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER MACHINE with 3 working stations and 15 drilling and milling spindles, e.g. for the production of larger quantities of fittings Further technical specifications: - Workpiece carrier: Workpiece holding drum Ø 800 mm for 8 workpiece clamping stations; indexing time 10 sec. - Drilling and milling unit: SK 40 taper; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Left: 3x drilling-milling spindles and drilling spindles, and 2x tapping spindles - Right: 2x drilling-milling spindles, 2x tapping spindles and 1x U-axis; plus radially adjustable 2x tapping spindles, 2x drilling-milling spindles (one adjustable), and 1x U-axis (adjustable) - 1st tapping unit: SK 40 taper; quill Ø 125 mm; working stroke 125 mm; speed 35.5–900 rpm; right/left - 2nd tapping unit: SK 40 taper; quill Ø 125 mm; working stroke 80 mm; speed 45–560 rpm; right/left Equipment: - 2 hydraulic power units - Chip conveyor - Belt filter by Filtertechnik Gera (nonwoven belt 430 mm) - Operating panel - Hand-held control unit Nsdou Idv Djpfx Abbocl in good condition.