Prenosni stroj

WEMA Vogtland BTrPi 900/8

Stanje: rabljeno, Technical Details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Machine weight approx.: 17.0 t Total power requirement: 83.0 kW Machine dimensions (LxWxH): 2400 x 2800 x 2800 mm Control cabinet dimensions: No. 1: LxWxH: 1000 x 850 x 2350 mm No. 2: LxWxH: 1250 x 650 x 2230 mm No. 3: LxWxH: 650 x 600 x 1700 mm No. 4: LxWxH: 1000 x 500 x 1350 mm Space requirement approx. (LxWxH): 5.0 x 6.2 x 3.8 m Fedpeu Idxfsfx Ah Degh TRANSFER MACHINE with 3 work stations and 15 drilling and milling spindles For example, suitable for the production of industrial fittings in high quantities (see photos) Further technical specifications of the machine: - Workpiece carrier: workpiece drum Ø 800 mm for 8 workpiece clamping stations, cycle time 10 sec. - Drilling/milling unit: SK 40 interface; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Right side: 3x drilling and milling spindles, 1x tapping spindle, 1x U-axis, as well as 2x radially adjustable drilling and milling spindles, 1x radially adjustable tapping spindle and 2x radially adjustable U-axes - Left side: 3x drilling and milling spindles, 1x tapping spindle, 1x U-axis, as well as 2x radially adjustable drilling and milling spindles, 1x radially adjustable tapping spindle and 2x radially adjustable U-axes - 1st tapping unit: SK 40 interface; quill Ø 125 mm; working stroke 125 mm; speed 35.5 – 900 rpm; right/left rotation - 2nd tapping unit: SK 40 interface; quill Ø 125 mm; working stroke 80 mm; speed 45 – 560 rpm; right/left rotation Features: - 2 hydraulic power units - Chip conveyor - Belt filter by Filtertechnik Gera (conveyor width 430 mm) - Operator panel - Handheld control pendant This machine is not connected. Sale as is! Subject to prior sale.

Stanje: rabljeno, Technical details: Fgsdpeu Idv Djfx Ah Djh Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total connected load: 72 kW Approx. machine weight: 18.0 t Machine dimensions (LxWxH): 2100 x 3400 x 2600 mm Control cabinet dimensions: No. 1: LxWxH: 1000 x 850 x 2300 mm No. 2: LxWxH: 1250 x 850 x 2500 mm No. 3: LxWxH: 1000 x 850 x 2100 mm No. 4: LxWxH: 1000 x 500 x 2350 mm Required space approx. (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER MACHINE with 3 working stations and 15 drilling and milling spindles, e.g. for the production of larger quantities of fittings Further technical specifications: - Workpiece carrier: Workpiece holding drum Ø 800 mm for 8 workpiece clamping stations; indexing time 10 sec. - Drilling and milling unit: SK 40 taper; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Left: 3x drilling-milling spindles and drilling spindles, and 2x tapping spindles - Right: 2x drilling-milling spindles, 2x tapping spindles and 1x U-axis; plus radially adjustable 2x tapping spindles, 2x drilling-milling spindles (one adjustable), and 1x U-axis (adjustable) - 1st tapping unit: SK 40 taper; quill Ø 125 mm; working stroke 125 mm; speed 35.5–900 rpm; right/left - 2nd tapping unit: SK 40 taper; quill Ø 125 mm; working stroke 80 mm; speed 45–560 rpm; right/left Equipment: - 2 hydraulic power units - Chip conveyor - Belt filter by Filtertechnik Gera (nonwoven belt 430 mm) - Operating panel - Hand-held control unit in good condition.

Stanje: rabljeno, Technical details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total power requirement: 83.0 kW Machine weight approx.: 17.0 t Space requirements approx. (LxWxH): 5.0 x 6.2 x 3.8 m Machine dimensions (LxWxH): 2400 x 2800 x 2800 mm Control cabinet dimensions: No. 1: LxWxH: 1000 x 850 x 2350 mm No. 2: LxWxH: 1250 x 650 x 2230 mm No. 3: LxWxH: 650 x 600 x 2300 mm No. 4: LxWxH: 1300 x 650 x 2350 mm TRANSFER AUTOMAT with 3 work stations and 15 drilling/milling spindles For example, for the production of fittings in larger quantities Further technical specifications: - Workpiece carrier: Workpiece holding drum Ø 800 mm for 8 clamping stations, cycle time 10 sec. - Drilling/milling unit: SK 40 tool holder; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Right: 4x drilling and milling spindles with 18 speeds and 1x hydraulic thread cutting spindle, 14 – 224 rpm - Left: 4x drilling and milling spindles with 18 speeds and 1x hydraulic thread cutting spindle, 14 – 224 rpm; radial 3x drilling and milling spindles, including 1x U-axis and 1x thread cutting spindle - 1st thread cutting unit: SK 40 holder; quill Ø 125 mm; working stroke 125 mm; speed 35.5 – 900 rpm; right/left rotation - 2nd thread cutting unit: SK 40 holder; quill Ø 125 mm; working stroke 80 mm; speed 45 – 560 rpm; right/left rotation Equipment: Fgjdpfxsu Idxre Ah Dsh - 2 hydraulic power units - Chip conveyor system - Belt filter by Filtertechnik Gera (fleece belt 430 mm) - Control panel - Hand-held selector switch in process.