Rotacijski stroj za prenos

RIELLO AZ.21/104/10-V

Stanje: zelo dobro (rabljeno), Leto izdelave: 1981, Funkcionalnost: popolnoma funkcionalen, Oprema: 1 desni vlek sani 1 ekscentrična stiskalnica 250 kN 4 normalni agregat sani 1 ozek agregat sani Delovno območje: Debelina žice: do 6,0 mm Širina traku: do 80 mm Itjdpfx Aor D N Eqjf Tjb Dolžina vleka: do 520 mm Zmogljivost: 10 - 250 kosov/min.

Stanje: rabljeno, Used Alfa Laval "Centritherm" CT-6 vacuum disc rotary evaporator. Maximum water evaporation capacity approx. 800 kg/h. This is a complete evaporation unit consisting of: 1. Centritherm CT-6 vacuum disc evaporator, mounted on a platform 2. Alfa Laval plate heat exchanger, model P2-HL 3. Control panel 4. Feed pump 5. Concentrate pump Isdpolc Dwvofx Af Tjtb 6. Condensate pump 7. Vacuum pump 8. Interconnecting piping 9. Mounting tools for disassembly of the discs and the drum itself

Stanje: rabljeno, CNC multi-spindle automatic lathe INDEX MS 32 C Itsdouhaqbspfx Af Tjb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 810 mm, premer struženja nad prečnim suportom: 800 mm, premer struženja: 320 mm, moč vretenovega motorja: 25.000 W, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 73 mm, potovalna razdalja osi X: 210 mm, pomik osi Y: 110 mm, pomik po osi Z: 810 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 20 m/min, hitri pomik na osi Z: 50 m/min, največja hitrost vrtenja: 6.000 obr/min, CNC FANUC MSX-701 / MAPPS IV CAPACITIES Swing diameter over bed: 800 mm Swing diameter over cross-slide: 800 mm Maximum turning diameter: 320 mm Standard turning diameter: 200 mm Maximum distance between centres: 1,130 mm Maximum turning length: 810 mm Maximum workpiece dimensions: 300 mm TRAVELS Turret X axis 1 & 2: 210 mm Turret Y axis 1 & 2: +65 / -45 mm Turret Z axis 1 & 2: 810 mm Head B axis 2: 920 mm MAIN SPINDLE Maximum spindle speed: 5,000 rpm Spindle motor power (30 min / continuous): 25/22 kW Maximum bar working diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° SUB-SPINDLE Maximum speed: 5,000 rpm Spindle motor power (30 min / continuous): 25/22 kW Maximum bar diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° FEED RATES Turret 1 rapid traverse X/Y/Z: 30/20/50 m/min Turret 2 rapid traverse X/Y/Z: 30/20/50 m/min TOOL TURRETS Number of turrets: 2 Number of tool stations per turret: 16 Turning tool shank section: 20 x 20 mm Maximum boring bar shank diameter: 32 mm Turret rotation time (1 position): 0.18 sec Max speed of driven tools: 6,000 rpm Driven tool motor power (5 min / continuous): 7.5/5.5 kW DIMENSIONS Footprint with chip conveyor: 5,120 x 2,720 mm Net weight: 8,300 kg Machine equipped with: • High-pressure coolant system • Bar feeder interface • Gantry parts discharge arm • Cut force management and load monitor system • No. 1 double radial driven tool holder • No. 3 axial driven tool holders • No. 2 external tool holders • No. 2 double boring bar tool holders Itjdpfxewlvlgs Af Teb • No. 2 single radial driven tool holders • No. 2 internal boring bar holders • No. 2 Kitagawa BD 208 self-centring chucks, 210 mm diameter • No. 1 set of jaws for each self-centring chuck • Operating manuals and CE Declaration Year of manufacture: 2010

Stanje: rabljeno, Leto izdelave: 2008, Obrat nad posteljo 923,8 mm Obrat nad prečno sani 755 mm Maks. premer struženja 356 mm Maks. dolžina struženja 510 mm X/Z pomiki 260/590 mm Vretenasti obrati 5000 obr/min Revolver z 12 postajami Premer vretenaste luknje 73 mm Krmiljenje: MSX-850 III Opremljeno z: Vpenjalna oprema s kleščami Odvajač odrezkov 3 standardni nosilci za orodje Brez portalnega nakladalnika (ni vključen). Itodpfx Aju Sn Hzsf Tsb

Leto izdelave: 1985, Stanje: rabljeno, Workpiece diameter: 25-90 mm Thread length: 3000 mm Thread pitch: 2-16 mm Total power requirement: 25 kW Machine weight: approx. 10.5 t Space requirement: approx. m O F F E R We are pleased to offer you, subject to prior sale and error, ex stock without obligation. WALDRICH COBURG Whirling/peeling machine for the production of threads, worms, ball screws or similar workpieces Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Thread diameter: 25 - 90 mm Maximum thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Maximum pitch angle up to Ø 55 mm: 15 degrees Maximum pitch angle up to Ø 90 mm: 8 degrees Stepless whirling head speed: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore of the clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive: approx. 25 kW - 380 V - 50 Hz Weight: approx. 10,500 kg Accessories / Special equipment: Itodpfstzdyzsx Af Teb • Stable whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests with integrated prism guides. Manual adjustment of thread depth and optical pitch angle setting at the carriage. • Powered tool head, normally equipped with 4 tools: 2 base cutters, 1 flank cutter, and 1 deburring cutter. • Workpiece speeds and pitch feed are finely adjustable via change gears. Separate rapid traverse for the return of the whirling support. • Simple peripheral indexing device for whirling multi-start threads. • Retrofitting device for whirling threads longer than the center width using intermediate support. • For correcting pitch errors of the leadscrew, thermal expansion of the workpiece, or errors during retrofitting, the machine is equipped with a compensation system. This allows both electronically programmed compensation of the leadscrew and workpiece-specific linear compensation via a wedge system. • Motor-driven tailstock with automatic stop by contact pressure sensor • Extensive accessories, including cutting tools, tool holders, collets, accessory parts, setting devices, gauges, and service tools. • Central lubrication, coolant system, separate control cabinet, operating manuals The machine is suitable for pre- and finish whirling of single and multi-start right-hand and left-hand threads, worms, ball screws or similar workpieces!

Stanje: dober (rabljeno), Leto izdelave: 1989, številka stroja/vozila: AN-No.: 89.04.019 A, 5 units Jakob Müller Frick AG NF 42 in 5x 4/42mm configuration with Müdata and Mütrans, without creel, exceptionally clean, from Germany, 2nd hand NF42 in 4/42mm from 1988-1990 AN. No.: 88.04.017 H ex.Alge, Müdata, 16 frames, very clean – €7,000 Isdpfx Ajr I Am Hjf Tstb AN. No.: 88.04.169 D ex.Alge, Müdata, 16 frames, very clean – €7,000 No. 213 AN. No.: 89.04.019 B ex.Alge, Müdata, 16 frames, very clean – €7,000 No. 223 AN. No.: 89.04.046 B ex.Alge, Müdata, 16 frames, very clean – €7,000 AN. No.: 90.00.066 B ex.Alge, Müdata, 16 frames, very clean – €7,000

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Vertical Turning Lathe – Double Column / Make: SCHIESS BRIGHTON Model: Vertimaster / Year of manufacture: 2009 The machine can be inspected by appointment. Condition: Fully operational / ready for operation. TECHNICAL DATA: Working Area and Travel: - Max. machining / swing diameter: 9,000 mm - Max. machining height: 6,000 mm - Table diameter: 6,000 mm - Clearance between columns: 8,300 mm - Main drive: 240 kW - Max. torque at table: 250 kN m - Max. workpiece weight: 150 t Boring and Milling Unit: Iodpjxgv Egofx Af Tjtb - Max. drive power: 63 kW - Spindle speeds: 0 - 2,500 rpm - Max. torque: 2,200 Nm Slide: - Cross section: 520 x 420 mm - Min. immersion diameter: 750 mm - Max. cutting force at 6 m diameter: 75 kN EQUIPMENT: - CNC control: SIEMENS Sinumerik 840D - Tool holder: SK 50 - Operator platform - Chip conveyor - Documentation - Further high-quality equipment ... No guarantee for completeness and accuracy of the technical data and equipment. – Subject to prior sale – A detailed technical data sheet and further information on equipment are available on request.

Stanje: rabljeno, TECHNICAL DATA - Number of Axes: 10 - Number of Spindles: 2 MAIN SPINDLE - Max. Bar Diameter: 16 mm - Max. Machinable Length: 184 mm - Spindle Speed: 10,000 rpm - Minimum C-Axis Resolution: 0.1° SUB SPINDLE - Max. Bar Diameter: 16 mm - Spindle Speed: 10,000 rpm - Minimum C-Axis Resolution: 0.1° TOOL HOLDER 1 - Number of Positions: 5 - Number of Driven Positions: 3 - Driven Tool Speed: 8,000 rpm TOOL HOLDER 2 - Number of Positions: 5 - Number of Driven Positions: 3 - Driven Tool Speed: 8,000 rpm Isdpfsuhhp Sjx Af Tetb FRONT UNIT - Number of Positions: 4 - Number of Driven Positions: 4 - Driven Tool Speed: 8,000 rpm SUB MACHINING - Number of Positions: 6 - Number of Driven Positions: 3 - Driven Tool Speed: 8,000 rpm ELECTRICAL SUPPLY - Supply Voltage: 400 V - Total Power: 14 kVA MACHINE HOURS - Operating Hours: 54,035 h ACCESSORIES - Control: Fanuc PNC DECO - Driven tool drive at: S2, S3, S5, S6 - Driven guide bushing - Parts catcher - Coolant tank * with high-pressure pump - Bar feeder: IEMCA GENIUS 118 / 32LL - Coolant container: MARKSA CSW 200 - Fire extinguishing system * NB: Functionality not guaranteed. Must be checked by a qualified third party authorized by the buyer. - Number of driven tool holders: 3

Stanje: rabljeno, Leto izdelave: 1998, Swing diameter 2000 mm Table diameter 1800 mm Turning height 1500 mm Control system Siemens Sinumerik 840 C Table speed range 0-280 rpm Feed rate range 0-18000 mm/min Max. workpiece weight 12000 kg Total power requirement 177 kVA Feed drives: - Crossrail slide, vertical and horizontal mm/min - Crossrail slide, rapid traverse 18000 mm/min Itsdpexap Eyjfx Af Tob - Crossrail adjustment speed 425 mm/min Milling drive: - Milling drive power 30 kW - Number of gearbox stages 2 stages - Gear ratio 3.17 - Speed range, 1st gear stage 10 - 224 - 950 rpm - Speed range, 2nd gear stage 32 - 72 rpm Tool system, cutting force: - Tool system 250.2 - Milling spindle taper according to 69871-A SK 50 - Cutting force at turning tool 50 kN Equipment/Accessories: - Tool probe - Various turning tool holders - Various chuck jaws - Various clamping devices - Various SK 50 tool holders - Grinding spindle - Driven tools - Tool changer / head changer - Hydraulic unit - Chip conveyor - Technical documentation