Briketiranje nakup rabljenega (101)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Pomembnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum objave
- Najstarejši oglasi
- Datum objave
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Nazadnje posodobljeno
- Najstarejša posodobitev
- Nazadnje posodobljeno
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- Pomembnost
- Pomembnost
mali oglas
Fohnsdorf
119 km
Stiskalnica za briketiranje
ATM Recyclingsystems GmbHArnoBrik 15
Klic
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 56.927 h, Funkcionalnost: popolnoma funkcionalen, Proizvajalec: ATM Recyclingsystems GmbH
Tip: ArnoBrik 15
Leto izdelave: 2001
Premer briket: 150 mm
Tehnični podatki
Premer briket 140 oziroma 150 mm
Kapaciteta: - litoželezni ostružki 4,8 – 5,3 t/h
- jekleni ostružki 4 - 5 t/h
- mešano briketiranje 4 – 5 t/h
- aluminijasti ostružki 1,6 - 1,8 t/h
Mešano briketiranje 4 - 4,5 t/h
Žica pnevmatik 2,5 – 3 t/h
Urna zmogljivost je odvisna od materiala
Gostota briket pri jeklu in litini 5,5 kg/dm³
Obratovalni tlak 300 bar
Zahtevan prostor (D x Š x V) 13.500 x 6.500 x 2.000 mm
Teža stroja 30 t
Glavna sila cilindra 5.300 kN
Poraba olja 2.800 litrov
Glavni pogon 4 x 30 kW
Ndodpfoxy E H Hox Aduod
Priključna moč z dodatki ca. 150 kW
Višina briket 110 - 140 mm
Teža briket - odvisno od materiala približno 10 - 16 kg
Cikel časa približno 10 sekund
mali oglas
Wels
236 km
Stiskalnica za briketiranje
DIPIUMB 50
Klic
Stanje: rabljeno, Leto izdelave: 2010, Output: 180 - 300 kg/h
Briquette diameter: 50 mm
Motor power: 15 kW
Hopper volume: 0.3 m³
Lubrication pump: 1.0 kW
- Automatic press for briquetting wood shavings and other waste materials
- Pressure oil lubrication for highly stressed moving parts
- Hydraulic clamp cylinder on the press clamp to improve briquette quality
- Electrical control for all operating cycles
- The press head can be heated or cooled during the briquetting process
- Raw material requirements:
Moisture content between 8 and 14%
Particle size between 1 and 12 mm
Technical Data:
- Total power consumption: approx. 22.0 kW
- Pressing force on the piston: 2,000 - 2,500 kg/cm²
- Vertical compactor screw: 1.5 kW
- Lubricating oil capacity: 50 liters
- Feed screw to compactor screw: 0.75 kW
- High-pressure pump: 0.55 kW
Njdpexy S E Nefx Adujdd
Features:
1 Electric press head heater
1 Fan for press head cooling
1 V-shaped dosing hopper for briquette press
Heavy-duty steel construction
Inspection window
incl. bridge breaker (driven together with feed screw)
Electro-mechanical level indicator
1 Cooling rail for briquettes, length: 4.0 m
Guidance of briquettes via round steel rods
complete with supports
mali oglas
Wien
252 km
Stiskalnica za briketiranje
PAWERT-SPM97/I-90/200
Klic
Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1921, Funkcionalnost: popolnoma funkcionalen, premer briketa: 90 mm, skupna masa: 6.000 kg, moč: 55 kW (74,78 KM), leto zadnje generalne obnove: 2025, Kompletna linija z 2 stiskalnicama v vrhunskem stanju! Motor cca 55 kW, kapaciteta cca 1.400 kg/h, stiskalni valj cca 90 mm (z ali brez luknje!), predgreto na cca 60 °C (krožno vodenje z vračanjem toplote preko oljnega rezervoarja). Popolnoma avtomatska kap žaga, popolnoma avtomatski pomik žage, vključno z električno omaro. Pakirna linija sestavljena iz: 1 gumijastega transportnega traku (dovod briketov), sledi skrčljivi tunel 400 V, prehodna dolžina tunela cca 1.600/600 mm, višina maks. cca 200 mm, izhodni valjčni trak cca 3 m. Vmesni rezervoar (silos cca 20 m³) za polnjenje stiskalnice.
Ndjdpexdrz Ejfx Adusd

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
mali oglas
Görisried
382 km
Stiskalnica za briketiranje
RufRuf 1100
Klic
Stanje: dober (rabljeno), Leto izdelave: 2009, obratovalne ure: 37.500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1653, skupna širina: 2.000 mm, skupna višina: 2.100 mm, skupna dolžina: 3.000 mm, skupna masa: 5.500 kg, Hydraulic system: - Power-regulated axial piston twin pump
Max. operating pressure: 300 bar
Drive motor: 55 kW, 400 V, 50 Hz, 3-phase AC, 1,500 rpm
Nsdpsxxk D Uofx Adusdd
Motor designed as an energy-saving motor, efficiency class EFF1
Protection class: IP 54
- Valve voltage: 24 V DC
- Hydraulic tank (950 l) with separate cooling and fine-filter circuit, 5µm filter unit, 2.2 kW drive
- Large double return filter integrated in the tank, 10µm filter unit - Hydraulic tank integrated into the support frame
Electrical configuration:
- Machine control cabinet per DIN EN60204-VDE 0113, protection class IP 54
- Input voltage: 400 V 50 Hz
- Lockable main switch on the housing
- Emergency stop button located in the control cabinet
- Control voltage: 24 V DC
- Freely programmable control (PLC) SIEMENS S7-200
- With operation and display panel Siemens TP 177B
Display and modify operating statuses and values
Execute operations
Display error messages
- Automatic start/stop via light barrier integrated in the feed hopper
- All initiators operate contactlessly
- Gear motors and pump motors feature thermal winding protection
Material feed:
- Feed hopper with a filling area of 800 x 400 mm
- Robust sheet steel construction with reinforcements
- Hopper volume approx. 150 liters
- Agitator to prevent bridging, driven by a 0.55 kW motor
- Feed screw driven by a 1.5 kW motor
- Feeding time automatically controlled by the PLC
Precompactor: Vertically arranged, hydraulically operated.
- Precompaction pressure adjustable via TP 177B
- Control system dust-tight, using the distance measurement system developed and patented by RUF
Main compactor: Horizontally arranged, hydraulically operated.
- Pressing pressure adjustable via TP 177B up to 300 bar
- Hydraulic cylinder 350, with pressing pressure up to 300 tons
Press capacity: - Depending on settings and material, up to 600 units per hour (approx. 800 - 1000 kg/h)
Briquette dimensions: - 240 x 70 mm
- Briquette length 70 - 110 mm; depending on settings as well as the type and bulk density of the material to be briquetted
- Max. specific pressing pressure approx. 1,776 kg/cm²
mali oglas
Bad Feilnbach
293 km
Stiskalnica za briketiranje
GrossGP Genius 2/50
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 872 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 910-2265, skupna širina: 1.350 mm, skupna višina: 1.410 mm, skupna dolžina: 1.900 mm, premer briketa: 60 mm, skupna masa: 750 kg, vrsta vhodnega toka: trifazni, vhodni tok: 16 A, vhodna frekvenca: 50 Hz, kapaciteta rezervoarja za olje: 100 l, pritisk: 160 letvica, moč: 5,5 kW (7,48 KM), dolžina polnilne odprtine: 1.044 mm, širina odprtine za polnjenje: 1.044 mm, Premer briketa (mm): 60
Njdpfx Asxwm Utodusdd
Hidravlični motor (kW): 5,5
Stalni mešalnik (kW): 0,5
Polžast motor (kW): 0,6
Količina olja (pribl. l): 100
Teža (pribl. kg): 750 kg
Odkrijte več rabljenih strojev
mali oglas
Bitburg
758 km
Ekstrakcijski sistem s stiskalnico za briketiranje
NestroASA + BP
Klic
Stanje: potreben popravila (rabljeno), Odsesalna naprava z briketirnim strojem Nestro
Ndedpfx Aexy Agkodujd
Ni preverjena – potrebna popravila
Zaradi tega se prodaja po zelo ugodni ceni.
Lokacija: iz zaloge 54634 Bitburg
- takoj na voljo -
mali oglas
Fohnsdorf
119 km
Stiskalnica za briketiranje
ATM Recyclingsystems GmbHArnoBrik 10
Klic
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 7.822 h, Funkcionalnost: popolnoma funkcionalen, Proizvajalec: ATM
Tip: ArnoBrik 10
Letnik izdelave: 2014
Premer briketa: 105 mm
Tehnični podatki
Glavne dimenzije
Dolžina x širina x višina: 4.250 x 3.600 x 2.200 mm
Teža približno: 10 t
Premer briketa: 105 mm
Višina briketa glede na material cca: 60 - 120 mm
Funkcijski podatki
Ciklični čas: 10 sek.
Kapaciteta na uro
- Aluminij: 850 - 1.060 kg/h
- Jeklo, litina: 1.800 – 2.000 kg/h
- Nikel: 1.800 – 2.000 kg/h
Masa briketa aluminij: 2,0 – 2,5 kg
Njdpfjxy E Evjx Aduodd
Gostota briketa jeklo, litina: 5,5 kg/dm³
Gostota briketa aluminij: 2,2 – 2,5 kg/dm³
Hidravlična oprema
Število zmogljivostno reguliranih aksialnih batnih črpalk: 2 kos
Potrebna moč na črpalni sklop: 30 kW
Delovni tlak: 300 bar
Volumen hidravličnega rezervoarja: 1.300 l
Električna oprema
Pogonska moč: 70 kW
Krmilna napetost: 24 V DC
Obratovalna napetost: 3 x 400 V / 50 Hz
mali oglas
Češka republika
352 km
Stiskalnica za briketiranje
PRODECOE60 ECO
Klic
Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, premer briketa: 60 mm, Refurbished machine suitable for smaller, single-shift woodworking workshops. It offers a robust construction with good performance. Maximum briquette output is 70 kg/h.
Nsdpfjvva Rpex Aduedd
Year of manufacture: 2003. Very good and well-preserved condition. Original warranty and post-warranty service provided directly by our company.
Professional PRODECO hydraulic briquetting presses are ideal for small and medium-sized woodworking operations. They enable efficient processing of waste into environmentally friendly and high-calorific fuel without the use of binders. They are characterized by a compact footprint, low energy consumption, and simple operation.
Technical specifications:
- Motor power: 5.5 kW
- Briquette output: 35 to 70 kg/h, depending on material
- Briquette diameter: 60 mm
- Briquette length max: 60 mm (so-called endless briquette)
- Hopper diameter: 1000 mm
- Weight: 650 kg
- Machine dimensions: 1170 x 1700 x 1510 mm
Features:
- Hydraulic unit: 7 pressing cycles/min
- Dual pressure gauge for improved pressure control
- Briquetted material level probe
- Oil level probe
- Inspection window
- CE safety standard
- Moisture content of processed material must not exceed 18%
The machine is refurbished, adjusted, and tested.
Price: EUR 8,000 valid only in November, afterwards the price will revert to the original EUR 8,500.
mali oglas
Göd
358 km
Stiskalnica za briketiranje
MekomMiniBRIK-30
Klic
Stanje: novo, Leto izdelave: 2025, Hydraulic briquetting press with 4 kW main motor. 50 mm diameter briquette. Capacity: 30–50 kg/hour. 1 m³ hopper, oil cooler.
Ndsdpfof Hmi Ejx Adusd
mali oglas
Görisried
382 km
Stiskalnica za briketiranje
RufRuf 1100
Klic
Stanje: dober (rabljeno), Leto izdelave: 2013, obratovalne ure: 37.400 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2110, skupna širina: 2.000 mm, skupna višina: 2.100 mm, skupna dolžina: 3.000 mm, skupna masa: 5.500 kg, Hydraulic system: - Power-regulated axial piston twin pump
Ndedpfxoxwizio Aduod
Max. operating pressure: 300 bar
Drive motor: 55 kW, 400 V, 50 Hz, 3-phase AC, 1,500 rpm
Motor designed as an energy-saving motor, efficiency class EFF1
Protection class: IP 54
- Valve voltage: 24 V DC
- Hydraulic tank (950 l) with separate cooling and fine-filter circuit, 5µm filter unit, 2.2 kW drive
- Large double return filter integrated in the tank, 10µm filter unit - Hydraulic tank integrated into the support frame
Electrical configuration:
- Machine control cabinet per DIN EN60204-VDE 0113, protection class IP 54
- Input voltage: 400 V 50 Hz
- Lockable main switch on the housing
- Emergency stop button located in the control cabinet
- Control voltage: 24 V DC
- Freely programmable control (PLC) SIEMENS S7-200
- With operation and display panel Siemens TP 177B
Display and modify operating statuses and values
Execute operations
Display error messages
- Automatic start/stop via light barrier integrated in the feed hopper
- All initiators operate contactlessly
- Gear motors and pump motors feature thermal winding protection
Material feed:
- Feed hopper with a filling area of 800 x 400 mm
- Robust sheet steel construction with reinforcements
- Hopper volume approx. 150 liters
- Agitator to prevent bridging, driven by a 0.55 kW motor
- Feed screw driven by a 1.5 kW motor
- Feeding time automatically controlled by the PLC
Precompactor: Vertically arranged, hydraulically operated.
- Precompaction pressure adjustable via TP 177B
- Control system dust-tight, using the distance measurement system developed and patented by RUF
Main compactor: Horizontally arranged, hydraulically operated.
- Pressing pressure adjustable via TP 177B up to 300 bar
- Hydraulic cylinder 350, with pressing pressure up to 300 tons
Press capacity: - Depending on settings and material, up to 600 units per hour (approx. 800 - 1000 kg/h)
Briquette dimensions: - 240 x 70 mm
- Briquette length 70 - 110 mm; depending on settings as well as the type and bulk density of the material to be briquetted
- Max. specific pressing pressure approx. 1,776 kg/cm²
mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütekMPP 180
Klic
Stanje: novo, Leto izdelave: 2024, Good, used demonstration unit
Availability upon agreement
Very robust machine with high pressing force
- Also suitable for producing a marketable briquette quality depending on the material. The large-dimensioned press cylinder and 70 mm briquette diameter make this possible.
Our best-selling briquetting press series
+ Proven, simple technology for extremely low susceptibility to faults
+ 25 years of experience, continuous development, and know-how
+ Several thousand machines in use by satisfied customers
+ Excellent price-performance ratio
Optional demonstration cooling unit available + €4,980 net (can also be retrofitted later)
* Cools the press clamp (important for operation over 4 hours) and the hydraulic oil
* Cooling unit recommended for regular operation longer than 4 consecutive hours
Commodity code: 84793010
Briquette diameter: 70 mm
Front bushing: 125 mm
Maximum briquette stroke: 100 mm
Optimal briquette stroke: 80 mm
Output (material-dependent): up to 150 kg/h*
*Dependent on bulk density
*Based on a bulk density of 200 kg per cubic meter
Motor power: 9.2 kW
400 Volt / 50 Hz / 3-phase
Length: 2095 mm
Width: 1300 mm (*1600 mm with large chamber)
Height: 1700 mm
Weight: 1250 kg
Oil volume: 220 liters
Silo diameter: 1200 mm
Silo volume: approx. 1 cbm
Pump: 75 liters
Hydraulic pre-compressor
Press clamp cooling option: yes, with special accessory coolable press clamp
Hydraulic oil cooling option: yes
Cooling of press clamp and hydraulic oil with cooling unit (special accessory)
Ndedpfxsd Nm Sij Adujd
Fill level monitoring option: yes
Continuous briquette option: yes (material-dependent)
Enlarged feed slide option: yes, with special accessory enlarged feed slide
CE compliant
Raw material requirements:
- The moisture content (atro) must be between at least 6% and a maximum of 18%
- Maximum chip length 20 mm
- Installation temperature: temperature-controlled room with at least +5°C
- The feed material must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result
mali oglas
Bitburg
758 km
Stiskalnica za briketiranje
WEIMAC 140 - sofort verfügbar - Vorführgerät
Klic
Stanje: novo, Leto izdelave: 2024, Super special price, as the machine was operated during our in-house exhibition.
Operating hours: 2
Immediately available – subject to prior sale
Once it’s gone, it’s gone!
Compact design, high reliability, and excellent value for money: These are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foam, or paper. Special feature: the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame.
Overall dimensions: 1900 x 1410 mm
Hopper opening: 1044x1044 mm
Hopper height: 1010 mm
Hopper volume: 1.1 m³
Drive power: 4 kW
Briquette diameter (mm): 40
Throughput capacity (kg/h): 30-40
Hydraulic oil volume (l): 100
Weight (kg): 530
Equipment:
Press
Powerful press mechanism with low-wear, chrome-plated jaws
Pre-compactor with end-position damped cylinder and bolted cover
Control cabinet with PLC control
Hydraulics
Separate oil tank with pump motor and valve control
Safety switch for oil temperature
Nsdpfxjlht H Ee Adujdd
Bin with agitator and gearbox motor
Screw channel with discharge screw and gearbox motor
Accessories:
Briquette length monitoring
Automatic on/off
Location: 54634 Bitburg
mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütek SystemtechnikMPP 60
Klic
Stanje: novo, Leto izdelave: 2025, obratovalne ure: 6 h, *Machine at a Special Price
Ndedjgl Nlmepfx Adujd
Our best-selling briquetting press – the classic model.
+ Proven, simple technology for extremely low susceptibility to failure
+ 25 years of experience, continuous development, and know-how
+ Several thousand machines in use by satisfied customers
+ Excellent price-performance ratio
Options (at extra cost):
* Surcharge for fill level sensor enabling automatic operation: + €995 net
* Surcharge for large pre-compactor chamber: + €970
(recommended for very light materials such as straw)
Briquette diameter: 50 mm
Front bushing: 50 mm
Max. briquette stroke: 40 mm
Optimal briquette stroke: 40 mm
Throughput rate (material dependent): up to 60 kg/h*
*depends on bulk density
*based on a bulk density of 200 kg per cubic meter
Motor power: 5.5 kW
400 Volt / 50 Hz / 3-phase
Length: 1680 mm
Width: 1100 mm
Height: 1500 mm
Weight: 680 kg
Oil quantity: 110 liters
Silo diameter: 1000 mm
Silo volume: approx. 0.7 m³
Pump: 27 liters
Hydraulic pre-compactor
Press jaw cooling option: no
Hydraulic oil cooling option: yes
Fill level monitoring option: yes
CE compliant
Requirements for raw material:
- Moisture content (atro) must be at least 6% and max. 18%
- Chip length maximum 15 mm
- Installation temperature: heated room with a minimum of +5°C
- The customer must safeguard against hydraulic oil loss
- Feed material must not contain metals or mineral impurities such as sand, stones, etc.
Damage to pressing tools and/or increased wear may otherwise result.
mali oglas
Bitburg
758 km
Stiskalnica za briketiranje
WEIMABrikettierpresse - sofort verfügbar -
Klic
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, obratovalne ure: 1 h, Super special price, as this unit was run at our in-house exhibition.
Operating hours: 1
Immediately available – subject to prior sale.
Once it's gone, it's gone!
Compact design, high reliability, and an excellent price-performance ratio: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foam, or paper. A key feature: the screw pre-compaction, which guarantees high briquette quality.
For quick and easy installation, the C 140 is mounted on a stable base frame.
Overall dimensions: 1900 x 1410 mm
Hopper opening: 1044 x 1044 mm
Hopper height: 1010 mm
Hopper volume: 1.1 m³
Drive power: 4 kW
Briquette diameter (mm): 40
Nsdpetnz Ttofx Aduodd
Throughput capacity (kg/h): 30-40
Hydraulic oil volume (l): 100
Weight (kg): 530
Equipment:
Press:
- High-performance pressing mechanism with wear-resistant, chrome-plated jaws
- Pre-compactor with end-position dampened cylinder and bolted cover
- Control panel with PLC control system
Hydraulic system:
- Separate oil tank with pump motor and valve control
- Safety switch for oil temperature
Container with agitator and gear motor
Screw conveyor channel with discharge screw and gear motor
Accessories:
- Briquette length monitoring
- Automatic on/off
Location: 54634 Bitburg
mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütek SystemtechnikMGP 60
Klic
Stanje: novo, Leto izdelave: 2025, Briquetting press with PLC and automatic briquette length control
Throughput: up to a maximum of 60 kg/h
Briquette: 50 mm cylindrical
Motor: 5.5 kW
Dimensions: 1,900 x 1,350 x 1,410 mm
Ndsdpfx Adov Rpxlsujd
Weight: approx. 860 kg
Requirements:
Feed material should ideally be shorter than 25 mm in chip length
Moisture content 6–12% ATRO
Machine suitable for intermittent operation. For example, up to 2 hours of briquetting followed by a 1-hour break, and so on.
If the machine is to operate continuously for more than 2 hours at a time, an optional cooling system must be connected.
mali oglas
Bitburg
758 km
Naprava za ekstrakcijo čistega zraka s stiskalnico za briketiranje
AL-KO / AlkoAPU 300 P - BP 30 - 50
Klic
Stanje: novo, Leto izdelave: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50
Suction inlet: 300 mm
Rated motor power: 7.5 kW / 3-phase
Voltage: 400 V / 50 Hz
Maximum airflow: 6,000 m³/h
Rated airflow: 5,089 m³/h
Negative pressure: 2,587 Pa
Filter surface area: 30 m²
Dimensions (L x W x H) in mm: 3,000 x 1,361 x 2,817
Briquetting output: 30 - 50 kg/h
Briquette diameter: 50 mm
Weight: 1,570 kg
Nsdpfx Adeh D If Hjuedd
This machine is brand new in our stock
– IMMEDIATELY AVAILABLE –
Subject to prior sale
Location: 54634 Bitburg
mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
muetekMPP 280
Klic
Stanje: novo, Leto izdelave: 2025, obratovalne ure: 8 h, Another machine immediately available
Very robust machine with high pressing force
- Also suitable for producing saleable briquette quality* depending on the material. The large-dimensioned press cylinder and the 80 mm briquette diameter make this possible.
Our best-selling briquetting press series
+ Proven, simple technology with extremely low susceptibility to failure
+ 25 years of experience, continuous development, and know-how
+ Several thousand machines in use by satisfied customers
+ Excellent price/performance ratio
Additional charge for cooling unit: + €4,995 net (can also be retrofitted later)
* Cools the press clamp and hydraulic oil (recommended if the press is operated continuously for longer than approx. 3.5 hours without a break)
Briquette diameter: 80 mm
Front bushing: 125 mm
Maximum briquette stroke: 100 mm
Optimal briquette stroke: 80 mm
Output (material-dependent): up to 200 kg/h*
*depending on bulk density
*based on a bulk density of 200 kg per cubic meter
Motor power: 9.2 kW
400 Volt / 50 Hz / 3-phase
Length: 2,095 mm
Width: 1,300 mm
Height: 1,700 mm
Weight: 1,250 kg
Oil volume: 220 liters
Silo diameter: 1,200 mm
Nsdpfx Asxfwdsdujdd
Silo capacity: approx. 1 m³
Pump: 75 liters
Hydraulic precompactor
Option cooling for press clamp: yes, with special accessory for cooled press clamp
Option hydraulic oil cooling: yes
Cooling of press clamp and hydraulic oil with cooling unit (special accessory)
Option level monitoring: yes
String briquette option: yes (material dependent)
Option enlarged feed slide: yes, with special accessory "Enlarged Feed Slide"
CE compliant
Requirements for feed material:
- Moisture content (atro) must be at least 6% and at most 18%
- Maximum chip length: 20 mm
- Installation temperature: tempered room at least +5°C
- Feed must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur.
mali oglas
Bitburg
758 km
Stiskalnica za briketiranje
WEIMATH 714
Klic
Stanje: novo, Leto izdelave: 2024, Weima Briquetting Press TH 714
Njdpfx Ajil Hggedujdd
The TH 714 machines are designed for operations requiring throughput capacities of up to 150 kg/h. The robust press housing enables the production of high-density briquettes from materials such as wood, polystyrene, foams, light metals, paper, or biomass. Numerous additional options can be implemented, such as an oil cooling system for multi-shift operation. All machines are available in both left- and right-hand designs. Installation on a stable base frame ensures quick setup and allows for mobile use.
User-friendly operation thanks to Siemens PLC control
To uphold our performance promise, we design and manufacture all control cabinets ourselves at our Ilsfeld location, equipping them with reputable international components. This guarantees the highest quality in a compact build. The Siemens PLC control system is perfectly tuned to the requirements of the briquetting process.
Foreign-object-resistant conveyor screw via cardanic suspension
The conveyor screw, which transports material into the briquetting press pre-compactor, is mounted on a cardan joint. This prevents foreign objects from damaging the conveyor screw. As always, the choice of mounting depends on the specific application. For metal processing, for example, we often recommend rigidly mounted screws.
Briquette diameter (mm): 70
Throughput capacity up to (kg/h): 150*1
Hydraulic motor (kW): 11
Oil volume (litres): 250
Weight (approx. kg): 1100
Location: Ex stock 54634 Bitburg
- immediately available -
Subject to prior sale
mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütekMFP 35
Klic
Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Machine available at a special price
Another machine available immediately (ex works Neckartailfingen)
Demo machine with approx. 10 operating hours
Your benefits:
Ndodpfx Aefci D Aeduod
+ Very robust, simple technology
+ Excellent price-performance ratio
+ Suitable for continuous operation
+ Long-standing, well-established and reliable machine
Includes control cabinet with timer operation
The press is manually activated and runs until the set time on the timer (e.g. 4 hours) has elapsed. Afterwards, the press switches off automatically.
Technical Specifications:
Briquette dimensions: approx. 35 x 35 mm (square)
Briquette length: 5–40 mm *depends on material
Throughput capacity: up to 25 kg/h *depends on material
Machine dimensions (approx.): 137 x 75 x 148 cm (Length x Width x Height)
Machine weight: approx. 250 kg
Silo holding capacity: approx. 250 liters
Motor: 2.2 kW, 400 V – 50 Hz
Noise emission: 62 dB
Raw Material Requirements:
– Wood shavings and dust less than 15 mm in length
– Moisture content less than 18% ATRO
– Sand, stones, metals, and minerals increase wear
---
Optional extras for additional charge:
– Timer function + €490 net
Machine is started manually and automatically switches off after the set time X.
– Level sensor for automatic operation + €1,450 net
Press starts and stops automatically
* NEW !!! Also available in 230 volts,
Motor then 3 kW instead of 2.2 kW,
Surcharge + €690 net (Delivery time approx. 8 weeks)
---
mali oglas
Bitburg
758 km
Stiskalnica za briketiranje
WeimaC 150 - sofort verfügbar ab Lager -
Klic
Stanje: novo, Leto izdelave: 2024, Your Advantages
- Stable pressing mechanism with low-wear, chrome-plated pliers
- Press chamber wear bushing
- Pre-compactor with end-position damped cylinder and bolted cover
- Control cabinet with PLC control
- Screw channel with discharge auger
- Separate oil tank with pump motor and valve control
- Safety switch for oil temperature
- Mounted on a stable base frame with rubber feet
- Briquette length monitoring
Robust design, low-maintenance technology, minimal space requirement: The machines of the C-series are particularly suitable for small and medium-sized businesses with a required throughput rate not exceeding 50–80 kg/h or 200 to 400 kg/day. Practically any suitable material can be briquetted, such as wood, styrofoam, foam materials, paper, or biomass.
Ndodjcnz U Eopfx Adusd
All machines are available in left- or right-handed configurations. Mounting on a stable base frame ensures quick installation and enables mobile use.
Briquette diameter (mm): 50
Throughput rate up to (kg/h): 50 (depending on material)
Hydraulic motor (kW): 5.5
Auger motor (kW): 0.55
Oil volume (liters): 100
Weight (approx. kg): 800
Outstanding Features at a Glance
- Hydraulics with separate oil tank: Temperature-monitored hydraulic unit, complete valve control, pump motor designed for long operating periods
- Briquette length monitoring: Controls briquette length for uniform sizing
- Press chamber wear bushing: Prevents wear in the pressing area
Location: Ex works – free loaded
mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütek SystemtechnikMPP NEM 900
Klic
Stanje: novo, Leto izdelave: 2025, * Options available at extra cost, see below
* Production time approx. +/- 5 months
The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust design that ensures consistent briquette quality during continuous operation. The compaction process is achieved solely by hydraulic pressing without the addition of any binding agents. Depending on the material, the volume of the input material can be reduced by up to 90%.
The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for integration beneath existing extraction and filtration units as a complete disposal solution are also available. Depending on customer requirements, individual MPP NEM units can be combined into a complete system. The press’s chip hopper can be loaded manually, via conveyor belt, dust extractor, or with a tipping skip. For fully automated systems, the use of a lift-and-tip device in combination with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material.
The length of a briquette, depending on the model, ranges from 40 to 80 mm, and the diameter—depending on the type—from 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a drip tray to collect and reclaim coolant, cutting, and lubricating fluids. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage hopper. The hopper is equipped with an agitator at the bottom to prevent bridging and to feed material into the precompaction chamber. A hydraulic slide in this chamber precompresses the material and pushes it into the pressing block. The main press cylinder compacts the material against a vertical slide until the set press force is reached. The vertical cylinder then lifts, and the finished briquette is ejected.
The more homogeneous the input material, the more uniform the length of the produced briquettes.
Advantages of briquette production:
• Volume reduction by up to 90%
• Emulsion recovery
• Cost savings in storage and transport
• Efficient disposal
• Profitable resale
Briquetting press NEM 900:
For briquetting aluminium chips
Throughput: up to a maximum of 320 kg/h (material-dependent; chip length less than 14 mm)
*more details after a free test with your material
Ndjdpfx Adsgfm Ryeuod
.
Briquette diameter: Ø 70 mm
Optimum briquette length: 70 mm
.
Technical data:
Total connected load: approx. 31 kW
Continuous operation: approx. 22 kW
400 Volt / 50 Hz / 3-phase
Pump: 120 + 60 litres per minute
Silo: 1 m³
Silo diameter: 1200 mm
Including agitator
Oil tank: 600 litres
Dimensions: 2500 x 1700 x 1730 mm (LxWxH)
Weight: 2250 kg.
Hydraulic precompaction with slide
Main press cylinder
Vertical cylinder
Prepared for connection of cooling unit
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

mali oglas
Bitburg
758 km
Stiskalnica za briketiranje
WeimaC 140 - sofort verfügbar ab Lager -
Klic
Stanje: novo, Leto izdelave: 2024, Compact design, high reliability, and an excellent price-performance ratio: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foams, or paper. Special feature: the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame.
Overall dimensions: 1900 x 1410 mm
Hopper opening: 1044 x 1044 mm
Hopper height: 1010 mm
Hopper volume: 1.1 m³
Drive power: 4 kW
Briquette diameter (mm): 40
Throughput (kg/h): 30-40
Hydraulic oil capacity (l): 100
Weight (kg): 530
Equipment:
Press:
- High-performance pressing mechanism with low-wear, chrome-plated clamp
Ndedpfx Adsbtnf Eeujd
- Pre-compactor with end-position damped cylinder and bolted lid
- Control cabinet with PLC control
Hydraulics:
- Separate oil tank with pump motor and valve control
- Oil temperature safety switch
Tank with agitator and gear motor
Screw channel with discharge screw and gear motor
Accessories:
Briquette length monitoring
Automatic On-Off
Location: 54634 Bitburg
mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
R 200
Klic
Stanje: dober (rabljeno), Good, used condition
Main motor: 11 kW
Throughput up to max. 200 kg/h
Year of manufacture: 12/2008 / Technically inspected in 01/2025
Nodst Hxudjpfx Adujdd
Briquette size: 150x60 mm
*Used machine, sold as seen
Functionality guaranteed upon handover
mali oglas
Bitburg
758 km
Sistem za odsesavanje čistega zraka s stiskalnico za briketiranje
AL-KOPower Unit 250 P - BP
Klic
Stanje: novo, Leto izdelave: 2025, AL-KO POWER UNIT® 250 P-BP
Inlet Diameter: 250 mm
Motor Rated Power: 6.5 kW / 3 phase
Voltage: 400 V / 50 Hz
Maximum Airflow: 4,900 m³/h
Nominal Airflow: 3,534 m³/h
Vacuum: 2,451 Pa
Filter Area: 22.4 m²
Dimensions (L x W x H) in mm: 2,305 x 1,333 x 2,609
Briquetting Capacity: 30 – 50 kg/h
Location: Arriving at warehouse 54634 Bitburg
Ndjdpfxocdr E Ae Aduod
Subject to prior sale
mali oglas
Bitburg
758 km
Stiskalnica za briketiranje
WeimaC 140
Klic
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, obratovalne ure: 1 h, Super special price, as the machine was operated during our in-house exhibition.
Operating hours: 2
Immediately available – subject to prior sale
Once it’s gone, it’s gone!
Compact design, high reliability, and excellent value for money: These are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foam, or paper. Special feature: the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame.
Overall dimensions: 1900 x 1410 mm
Hopper opening: 1044x1044 mm
Nsdstnz Hbjpfx Aduedd
Hopper height: 1010 mm
Hopper volume: 1.1 m³
Drive power: 4 kW
Briquette diameter (mm): 40
Throughput capacity (kg/h): 30-40
Hydraulic oil volume (l): 100
Weight (kg): 530
Equipment:
Press
Powerful press mechanism with low-wear, chrome-plated jaws
Pre-compactor with end-position damped cylinder and bolted cover
Control cabinet with PLC control
Hydraulics
Separate oil tank with pump motor and valve control
Safety switch for oil temperature
Bin with agitator and gearbox motor
Screw channel with discharge screw and gearbox motor
Accessories:
Briquette length monitoring
Automatic on/off
Location: 54634 Bitburg
Olajšamo vam iskanje: "briketiranje"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
Rabljeni Briketiranje (101)
Zdaj preiščite celoten Machineseeker z več kot 200.000 rabljenimi stroji.Brskajte po najbolj priljubljenih poimenovanjih strojev:

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec





















































































































































































