Stiskalnica za briketiranje

RUF 18,5/5000/80

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, skupna dolžina: 9.800 mm, skupna širina: 4.000 mm, dolžina podajanja os X: 3.500 mm, dolžina pomika po osi Y: 1.100 mm, dolžina podajanja os Z: 1.100 mm, hitrost pomika os X: 30.000 m/min, hitrost podajanja os Z: 5.000 m/min, dolžina mize: 3.000 mm, obremenitev mize: 6.000 kg, širina mize: 1.200 mm, moč: 22 kW (29,91 KM), Machine de rectification plane Ziersch - Z1030 MACH-ID 9597 Fabricant : Ziersch Modèle : Z1030 Commande : Mitsubishi Touch Année de fabrication : 2018 Déplacement axe X : 3500 mm Déplacement axe Y : 1100 mm Déplacement axe Z : 1100 mm Longueur de la table : 3000 mm Largeur de la table : 1200 mm Capacité de charge de la table : 6000 kg Avance axe X : 30000 mm/min Avance axe Z : 5000 mm/min Dimensions de la meule : 500 x 100 x 203 mm Puissance : 22 kW Vitesse : 3000 tr/min Système de refroidissement : oui Predpfjy En Dnsx Al Dob Avance axe Y : 3000 mm/min Longueur : 9800 mm Largeur : 4000 mm Hauteur : 4500 mm Poids : 27500 kg Veuillez noter : Les informations présentées sur cette page ont été fournies au mieux de nos connaissances et, lorsque possible, obtenues auprès du fabricant. Elles sont communiquées de bonne foi, mais leur exactitude ne peut être garantie. Par conséquent, ces informations ne constituent ni une représentation ni des conditions contractuelles. Nous vous recommandons de vérifier tous les détails importants.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, stružna dolžina: 700 mm, potovalna razdalja osi X: 205 mm, pomik po osi Z: 700 mm, moč vretenovega motorja: 22.000 W, skupna višina: 2.800 mm, skupna dolžina: 6.000 mm, skupna širina: 3.900 mm, skupna masa: 9.800 kg, Complete machining with double spindle, upper and lower turret Kitagawa 3-jaw chuck left and right Tool holders with driven tools, both axial and radial Large jaw cabinet with inserts OGL gantry loader with approx. 10 kg load capacity Chip conveyor Paper band filtration system with pressure tank Max. turning diameter: 400mm X-axis travel: 205mm Z-axis travel: 700mm Spindle bore: 62mm Spindle speed: 6000 RPM Spindle power: 22kW Prodpfx Alsyn Em Re Deb Sub-spindle speed: 6000 RPM Sub-spindle through hole: 62mm Sub-spindle power: 15kW Tool changer: 16 positions Driven tool speed: 6000 RPM Lower turret positions: 16 Driven tool speed: 6000 RPM Driven tool power: 7kW Chip conveyor: yes Tool Eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please note: The information on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is provided in good faith, however, accuracy cannot be guaranteed. Accordingly, this does not constitute representation or contract terms. We recommend that you verify all key details yourself.

Stanje: novo, Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8100332, natančnost ponavljanja: 0,076 mm, potovalna razdalja osi X: 300 mm, pomik osi Y: 300 mm, pomik po osi Z: 25 mm, teža obdelovanca (maks.): 245 kg, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 230 V, pritisk: 2.000 letvica, Do you need a precise and versatile cutting machine that doesn’t take up your entire workshop floor? Then the OMAX ProtoMAX is the solution. It combines industrial-grade quality with a compact footprint – perfect for workshops, schools, product development, prototype manufacturing, and small-batch production. Using water and abrasive, you can cut almost any material – from aluminum, stainless steel, and titanium to carbon fiber, plastic, glass, and stone. All with high precision, without heat distortion or material deformation. 🔹 Cutting area: 304 x 304 mm 🔹 Max material thickness: up to 25 mm 🔹 Working pressure: 2,068 bar 🔹 Power supply: 230 V, single-phase (standard socket!) 🔹 Ready to operate – plug & play ProtoMAX is delivered complete with IntelliMAX software, letting you draw, import, and cut directly from the same interface. Easy to use, powerful enough for advanced jobs. Want to show that your workshop means business – even with limited space? Then the OMAX ProtoMAX is the obvious choice. Prjdpfjwl Ipksx Al Dob

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Ponujamo vam: CNC stružni in rezkalni center z robotsko avtomatizacijo Proizvajalec: DMG MORI Tip: CLX 450 TC Letnik: 2026 Krmilnik: Celos X s sistemom Siemens Sinumerik One Tehnični podatki: Maks. premer obdelovanca: 400 mm Dolžina obdelovanca: 1100 mm Premer prečnega prehoda palice: maks. 65 mm Hodi: x-hod: 276 mm z1-hod: 755 mm z3-hod: 775 mm y-hod: +/- 100 mm b-hod: +/- 120 ° Glavna vretena: Število vrtljajev: 5.000 vrt/min Moč pogona: 14/17 kW Maks. navor: 275/345 Nm Protivretena: Število vrtljajev: 5.000 vrt/min Podpfx Ajz A Ay Tel Djrb Moč pogona: 14/17 kW Maks. navor: 275/345 Nm Rezkalna vretena: Število vrtljajev: 0 – 12.000 vrt/min Moč pogona: 8,8/10,5 kW Oprema za orodje: HSK-T 63 Menjalnik orodij: 60 položajev Maks. navor: 73/90 Nm Notranji vpenjalni nastavek: Ø 67 mm Delovne ure: približno 1.130 ur Ure vretena: približno 280 ur Tehnične značilnosti in dodatna oprema: - Absolutni, neposredni sistemi za merjenje hoda v osi x in y - Filter z dvojnim preklopom - Protivretena ISM 65, A2-8, os c in hidravlična zavora vretena - Transportni sistem za odrezke s tekočo traku, vključno s rezervoarjem za hladilno tekočino - Sistem za izpiranje vpenjal, nameščen zunaj, za glavno in protivreteno - Dovod hladilne tekočine preko protivretena - Pištola za škropljenje hladilne tekočine - Sistem za čiščenje plošč varnostnega stekla - Elektronsko ročno kolo (če je na voljo) - Izmenično število vrtljajev - Signalna luč, 4-barvna - Avtomatska vrata delovnega prostora, električna - Električni vmesnik Robo2Go - Tipalo za merjenje obdelovanca, proizvajalec Renishaw RMP40 (če je na voljo) - Sistem za merjenje orodja, proizvajalec Renishaw RP1 (če je na voljo) - Funkcija za nadzor loma svedra za Renishaw RP1 - Sistem za merjenje hoda za os z1 - Diferenčni tlak 2,0 na glavni in protivreteni - Funkcija podpirala za protivreteno, vključno s stopalko - Sistem za hladilno tekočino 8 / 40 bar, sestavljen iz: - Rezervoar za hladilno tekočino 600 l - Variabilni tlak črpalke 8 – 40 bar - Sistem filtrov s trakom - Črpalka za dvig z nadzorom nivoja - Mehanski ločevalnik oljnih meglic - Paket za zaščito - Tehnološki cikel z dialogom za programiranje - Tehnološki cikel za odrezavanje obdelovanca - 2 x tričeljustni vpenjalni nastavek, proizvajalec Schunk ROTA THW3 265-81 - Sistem za nakladanje in razkladanje Robo2Go, sestavljen iz: - Modul 35 kg - Predalnik vključno z dodatnim predalom - Dodatna oprema na zahtevo Dodatna oprema, prikazana orodja in pripomočki za vpenjanje spadajo v obseg dobave samo, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih in specifikacijah, kot tudi do prodaje medtem!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 29.000 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, The INDEX C200 – year of manufacture 2009 – is a high-performance CNC production turning machine equipped with a FANUC 31i control, main spindle and counter spindle, and a 65 mm bar capacity. The machine features a premium three-turret configuration: Turrets 1 and 2 each offer X, Z, and Y axes, while Turret 3 is dedicated to operations on the counter spindle. All three disk turrets are fitted with 10 stations each and support driven tools up to 6,000 rpm, allowing for highly flexible complete machining operations. With a gantry loader, conveyor belt, C-axis on both main and counter spindles, and powerful spindle drives, this machine is especially suitable for productive series manufacturing of complex turned and milled parts. Control: FANUC 31i Configuration: Machine with 3 tool carriers / 3 disk turrets Bar capacity: 65 mm Machine bed: vertically arranged grey cast iron bed Main spindle: Spindle 4 Counter spindle: Spindle 5 with Z-axis Spindles Main spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, size 140 cylindrical Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, size 140 cylindrical Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Z-axis (counter spindle): 700 mm travel Rapid traverse Z-axis: 50 m/min Tool carriers / Turrets Equipped with 3 disk turrets, each with 10 stations. Tool system for 10 stations: DIN 69880 cylindrical shank – Ø30 x 55 mm. Tool carrier 1 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 320 / 550 mm (as per documentation) Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 2 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 550 mm Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 3 X-axis 10 stations Dedicated exclusively for machining on the counter spindle X-axis: 180 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Further technical equipment as per documentation: - Gantry loader system with numerically controlled Z-axis - Workpiece unloading from main or counter spindle to conveyor belt - Remnant part removal from the main spindle into remnant container Gantry loader: Traverse speed: 100 m/min Traverse range: 70 mm Max. workpiece diameter: 90 mm Max. workpiece length: 250 mm Max. remnant length: 250 mm Max. workpiece weight: 3.5 kg Hydraulic system: Delivery rate: 19 l/min System pressure: 90 bar Hydraulic tank: 40 l Cooling circuit: Delivery rate: 19 l/min Cooling unit power: 13 kW Coolant system: Pump output: 80 l/min / 8 bar Tank capacity: 300 l Prsdpfsy Tmhzex Al Deb Chip conveyor: Chip discharge height: 1,250 mm

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Minimum C-axis resolution: 0.001° Psdjv Ig Avjpfx Al Dorb COUNTER SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Minimum C-axis resolution: 0.001° - Travel: 390 / 600 mm TURNING-MILLING SPINDLE - X-axis travel: 350 mm - Y-axis travel: ±80 mm - B-axis stroke: 270° - Minimum B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 LOWER TURNING AND MILLING SPINDLE - Y-axis travel: ±80 mm - B-axis stroke: 270° - Minimum B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 TOOL CHANGER - Tool changer type: Bar loader - Number of tools in magazine: 80 - Tool change time: 4.5 s ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 68 kW WEIGHT AND DIMENSIONS - Machine height: 2,500 mm - Machine weight: 11,000 kg MACHINE HOURS - Spindle hours: 19,781 h - Turning-milling spindle hours: 9,713 h ACCESSORIES - Control: Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filter * internal coolant supply (ICS) - Chip conveyor - Spindle cooling - Parts removal

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, obratovalne ure: 435 h, skupna višina: 1.065 mm, skupna širina: 645 mm, skupna masa: 114 kg, potovalna razdalja osi X: 165 mm, največja dolžina izdelka: 685 mm, število osi: 3, Plastic 3D printer, manufactured in 2021. This FORMLABS Fuse 1 offers a build volume of 165 x 165 x 300 mm and a hopper capacity of 8.5 kg for PA12 nylon. It operates with a Ytterbium Fiber type laser and has a maximum part size of 15.9 x 15.9 x 29.5 cm. If you are looking for high-quality 3D printing capabilities, you should consider the FORMLABS Fuse 1 machine we have for sale. Contact us for more details. Formlabs Fuse 1 • Build volume: 165 x 165 x 300 mm (6.5 x 6.5 x 11.8 in) • Layer thickness: 110 microns (0.004 in) • Build speed: 10 mm per hour (0.39 in per hour) • Laser type: Ytterbium fiber • Laser spot size: 200 microns (0.0079 in) • Material refresh rate: 30 to 50 percent • Hopper capacity: 8.5 kg PA12 nylon (18.7 lb) • Dimensions: 685 x 645 x 1065 mm • Maximum part size: 15.9 x 15.9 x 29.5 cm (6.3 x 6.3 x 11.6 in) • Minimum access dimensions: 125.5 x 149.5 x 187.0 cm (49.4 x 59.0 x 73.6 in) • Printer dimensions: 64.5 x 68.5 x 107 cm, 165.5 cm with stand • Weight: 114 kg • Warm-up time: 60 minutes • Operating environment: 18 to 28 °C (68 to 82 °F), ≤ 30% relative humidity • Internal temperature: 200 °C (392 °F) • Temperature control: quartz tube heating elements, PTC cartridges • Air filtration: pressure-controlled two-stage filtration (HEPA and carbon) • Power requirements: EU 230 VAC 7.5 A, US 120 VAC 15 A • Galvanometer: Formlabs custom • Laser wavelength: 1065 nm • Laser power: max. 10 watts • Beam divergence: 4.01 mrad • Laser class: Class 1 • Connectivity: WiFi 2.4 GHz, Ethernet 1000Mbit, USB 2.0 • Touchscreen: 10.1 in (1280 x 800) • Controller brand: Formlabs • The display is damaged, but this does not affect functionality Fuse Sift (optional – price on request): • Fuse Sift dimensions: 99.1 x 61.0 x 188.8 cm (39.0 x 24.0 x 61.8 in) • Fuse Sift weight: 93 kg without build chamber or powder (205 lb) • Build chamber dimensions: 27.9 x 34.2 x 48.9 cm (11.0 x 13.5 x 19.3 in) • Build chamber weight: 11 kg (17.6 kg full with 20% packed powder; 24.3 lb, 38.8 lb) • Build volume: 16.5 x 16.5 x 30.0 cm (6.5 x 6.5 x 11.8 in) • Fresh powder container capacity: 8.5 kg Nylon 12 (18.7 lb) • Waste powder hopper capacity: 9.1 kg Nylon 12 (20 lb) • Air filtration technology: replaceable HEPA filter • Operating environment: 18 to 26 °C (68 to 80 °F), ≤ 30% relative humidity • Air management: negative overpressure hood with replaceable HEPA filter, independent ventilation system • Power requirements: EU 230 VAC 7.5 A, dedicated circuit; US 120 VAC 15 A, dedicated circuit • Power requirement for high-performance vacuum: EU 230 VAC 10 A; US 120 VAC 20 A • Vacuum requirements: auxiliary vacuum with static-dissipative, grounded components • Noise emission: max. 76.5 dB Pjdpfxey Sy Nvs Al Dorb

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 44 kW (59,82 KM), skupna masa: 70.000 kg, skupna višina: 5.400 mm, skupna dolžina: 22.200 mm, skupna širina: 5.400 mm, Bobnasti sušilnik Dutch Dryers - DX 3000 Leta 2021 na novo obnovljen Moč motorja 2 x 22 kW Pogonske verige in zobniki novi Novi frekvenčni pretvornik Predpoyxm E Refx Al Dob Razstavljiv na 6 delov Skupna teža cca 70.000 kg Komaj opazne sledi obrabe

Stanje: rabljeno, Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, Na prodaju linija za sortiranje okrugle građe proizvođača Nurminen. 40 sortirnih džepova, skener Finnos Fusion CU-2 sa X-Ray, ponovo instaliran 2022. godine. Brzina 100 m/min. Maksimalna ulazna dužina trupca: 6,1 m Minimalna ulazna dužina trupca: 2,4 m Maksimalni prečnik trupca: 550 mm Rukovanje trupcima: stacionarna dizalica Transverzalni ulazni transporter Broj lanaca poprečnog transportera: 6 Dužina poprečnog ulaznog transportera: 34,198 m Prodpfjxgt U Ejx Al Dsb Jednoredno odvajanje trupaca Merenje trupaca: u liniji Dužina sortirne linije: 140 m Izbacači u liniji za sortiranje: Da Broj izbacivača u liniji: 40 Sortirne kutije za okruglu građu: beton, čelik Sortirnih kutija: 40 Maksimalna dužina kutije: 7 m Maksimalna širina kutije: 2,5 m Maksimalna visina kutije: 1,2 m Podesivo automatsko ubacivanje Sortiranje po: kvalitetu, prečniku, dužini Potrebna površina - dužina: 180 m Potrebna površina - širina: 30 m

Stanje: rabljeno, Leto izdelave: 2017, Overview The wrapper was manufactured in 2017 by the Spanish company Movitec. It will be in operation until the end of September 2023 and can be inspected at any time. Technical data - Max. capacity: 120 pallets/hour (at 10 wraps) - Dimensions (LxWxH): 5,240 mm x 3,825 mm x 4,184 mm - Weight: 2,000 kg - Film width: 500 mm - Main frame made of steel Pedpfol Uyfkex Al Dorb - Rotary ring with dispenser for pre-stretch film - Motorized pre-stretch system - Cutting and sealing system Scope of delivery - Safety fence - Wrapper | Movitec | Saturn S6 | 2017 - Compressor | Josval | EDS-900 | 2016