Stiskalnica za briketiranje

MPP 60

Stanje: novo, Leto izdelave: 2026, Our best-selling briquetting press – the classic choice. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Outstanding price-performance ratio Optional extras (available at additional cost): *Surcharge for fill level sensor, enabling automatic operation: Psdpfx Aogl Nlmondogn + €995 net *Surcharge for large pre-compression chamber + €970 (Recommended for very light materials such as straw, increases machine width by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg/m³ Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump output: 37 liters Hydraulic pre-compressor Press tongs cooling option: No Hydraulic oil cooling option: Yes Fill level monitoring option: Yes CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and max. 18% - Maximum chip length 15 mm - Installation temperature: Tempered room, at least +5°C - Customer must provide protection against hydraulic oil loss - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Stanje: novo, Leto izdelave: 2024, Magnetic separator for chip transport line Tube magnet with 4 magnetic plates (permanent magnet) Pgjdpfxocqvhwj Anden Hinged door for easy removal of metal parts Tube diameter: 180 mm Location: In stock at 54634 Bitburg - immediately available -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Special price for trade fair demonstration unit *Available upon request New: With the frequency inverter option, eligible for up to a maximum of 45% government funding Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *Both individual machines are fully produced and in stock; only need to be connected together Pedped Su Hxsfx Andogn 1. Technical Data – Briquetting Press: Our best-selling briquetting press – the classic model. + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Customs tariff number: 84793010 Briquette diameter: 50 mm Front sleeve: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput capacity (material-dependent): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW, 400 Volt / 50 Hz / 3-phase Total system footprint: 2.2 x 1.1 x 2.8 m (LxWxH) Height: 2.8 m (special container) Delivery also possible in 2 components Weight: approx. 1200 kg Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compressor Option - press plier cooling: no Option - hydraulic oil cooling: yes Option - level monitoring: yes CE compliant 2. Technical Data – Clean Air Extraction Unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when facing the dust bin) Residual dust content:

Stanje: novo, Leto izdelave: 2024, Working width: 600 mm Pgodpfxsug Ty Hs Andon Working height: 150 mm Units: 4 brush units, individually adjustable 1st unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with 3 kW motor 2nd unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with 3 kW motor 3rd unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive 4th unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive Height adjustment: electric Height display: digital Control system: touchscreen Feed speed: 4 - 12 m/min Feed motor power: 0.37 kW Machine length: Machine width: Weight:

Stanje: dober (rabljeno), Tilting spindle moulder, table milling machine -Spindle adjustment: height and angle -Tiltable: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm Pedpfeh Nvyzox Andjgn -Feed unit: Holz-Her, 3 rollers -Usable spindle length: 100 mm -Spindle diameter: 30 mm -Max. cutter diameter: 220 mm -Dimensions (LxWxH): 1540/1100/1520 mm -Weight: 962 kg

Stanje: rabljeno, Leto izdelave: 1991, Rabljeni stroj Leto izdelave: 1991 Povsem avtomatski stoječi, Območje reza 5.300 x 2.200 mm (širina reza x višina reza), Premer žaginega lista: 300 mm, Krmiljenje za vertikalne in horizontalne reze, z ALU preklopnimi prisloni in ALU vmesno podporo, z napravo za predrezovanje SUPER-CUT Pgjdpfx Aox Rr D Aonden Motor 3 kW - 400 V Razpoložljivost: kratkoročno Lokacija: Röllbach

Stanje: rabljeno, Leto izdelave: 2000, Premer reza 280 mm Dolžina tračnega lista 4930 mm Območje reza pri 90 stopinjah: kvadrat 280 x 280 mm Območje reza pri 45 stopinjah: okroglo 280 mm Območje reza pri 45 stopinjah: kvadrat 280 x 280 mm Območje reza pri 60 stopinjah: okroglo 220 mm Območje reza pri 60 stopinjah: kvadrat 200 x 200 mm Podajalna dolžina 600 mm Večkratna podajalna dolžina 5400 mm Hitrost reza 17 - 90 m/min Dolžina ostanka min./maks. min. 30 mm Minimalni premer reza 10 mm Krmiljenje KASTO, Compact Control Skupna potrebna moč 5 kW Psdpfxjw En Efe Andegn Teža stroja cca 1,75 t Mere stroja D x Š x V 2,68 x 2,54 x 1,59 m Dodatki: hladilni sistem, valjčna proga 3300 mm dolga, 300 mm široka; valjčna proga 1350 mm dolga, 300 mm široka.

Stanje: rabljeno, Leto izdelave: 2011, Premer struženja: 160 mm Dolžina struženja: 550 mm Krmiljenje Siemens Teža stroja cca 9.000 kg Maks. dolžina struženja: 550 mm Maks. preboj palice: 65 mm Maks. premer struženja: 160 mm Z MBL 3 revolverski glavi z hladilnim stolpom Dodatni hladilni rezervoar s filtrom in črpalkami. Črpalka: 8 bar – 20 litrov + 20 bar – 30 l/min Pgodpeyuzfpjfx Anden

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 28.742 h, Funkcionalnost: popolnoma funkcionalen, prehod palice: 65 mm, FANUC Serija 31i-Model A 3 revolverji Transportni trak za dele Magazin Psdpfxoydmbuj Andsgn Dodatne informacije na zahtevo

Stanje: rabljeno, Leto izdelave: 2009, PRODECO BRIQUETTING PRESS MODEL L70 – CE COMPLIANT – USED - Briquette diameter: 70mm - Output: 50-120 kg/h - Serial no.: 89 - Year: 2009 Psdpfx Aswrddqsndogn - Complete with manual