Stroj za polnjenje tub nakup rabljenega (14)

Stanje: novo, Leto izdelave: 2025, Fully automatic tube filler for pastes and liquids. Typically used for cosmetics such as make-up, creams, or general care products like shower gel, shampoo, hair gel, toothpaste, sunscreen, etc. Suitable for pre-formed tubes (sealed with caps) made of aluminum. The machine provides fully automatic feeding and orientation of tubes (rotation in the slot) based on registration marks, as well as filling and sealing of the tubes. Prior to filling, the tubes are air-rinsed to prevent contamination. The no-tube-no-fill function is also a standard feature. Water cooling system, batch/date printer, and dosing unit comprising pneumatic piston pump and storage tank with level sensor are included. PLC controlled, operation via touchscreen. Optional at extra cost: heated storage tank, agitator for storage tank, additional format sets (slots) for different tube diameters, external tube feed elevator. – Specifications: Max. machine cycle rate (idle): 50 cycles/min; filling range: 1–120 ml; accuracy: ±1%; tube diameter: 10–28 mm (a separate slot required for each tube diameter); tube length: 50–180 mm; number of filling heads: 1; storage tank capacity: 40 L; all product-contacting parts made of stainless steel 316L; power supply: 220/380 V, power consumption: 3.1 kW; compressed air: 0.4–0.6 MPa; machine dimensions: L1950xW750xH1850 mm; machine weight: 900 kg. Gkodpfx Aev Nldhsh Dec Please note that our new prices are often below typical used prices. Feel free to contact us and tell us about your packaging application. – We usually have 30–50 different new machines available from stock for immediate delivery. For machines manufactured to customer specifications, we offer very short lead times starting from approx. 3 weeks. – All machines are available with a full warranty.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, A complete tube filling and packaging line for ointments is available. 1) Tube feeder IWK TZK 200, year of manufacture: 1991. 2) Tube filling machine IWK TFS 30, year of manufacture: 1991. 3) Cartoner IWK CPS-R, year of manufacture: 1991. 4) Serialization unit Laetus MV-70-F-130-TL, year of manufacture: 2019. 5) Checkweigher Mettler & Toledo C3570, year of manufacture: 2019. 6) Bundler Kiener ASK 450, year of manufacture: 1993. 7) Case packer Skinetta PAL 145, year of manufacture: 1997. 8) Palletizer Skinetta PAL 1400, year of manufacture: 1997. 9) Horizontal laminar flow unit Marchhart LF-ZP-Horizontal, year of manufacture: 2020. 10) Accumulation roller conveyor RBS 140, year of manufacture: 1998. 11) Ointment pump Netzsch BEF200/NM045BH, year of manufacture: 2022. Documentation is available. An on-site inspection is possible. Gkjdpfouf T Nlex Ah Doc

Stanje: rabljeno, Leto izdelave: 2018, Razvrstilnik steklenic iz leta 2018, 8-10.000 steklenic na uro, popolnoma funkcionalen, za okrogle PET ali HDPE steklenice Gksdpfx Ahjwgvxps Doc

Leto izdelave: 2018, Stanje: novo, For sale is a magnetic filter that has only been used once. Gksdpfodzp R Tox Ah Doc Sealed. 9 magnetic filter rods, including cleaning function.

Stanje: novo, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, skupna širina: 930 mm, skupna dolžina: 600 mm, skupna višina: 1.730 mm, vrsta vhodnega toka: Klimatska naprava, skupna masa: 152 kg, We are offering a NEW and unused NEWECO aluminium tube filling and folding machine. Gkjdpfxsvy Eu Ue Ah Doc This machine was delivered to the customer at the end of 2021 and installed, but has never been put into operation. About the machine: A compact, highly efficient benchtop machine designed for filling aluminium tubes with creams, gels, or similarly viscous fluids. The tubes are double-folded and simultaneously coded. The machine operates in a semi-automatic mode – all processes except for loading, aligning, and moving the tube holders are fully automated. MAIN FEATURES: - Suitable for all standard aluminium tubes and caps - Operation in 5 stations - Electronic process control with integrated article management - 25-litre hopper including cover - Rapid changeover for different products MACHINE COMPONENTS: - Construction in AISI 304 stainless steel - Product-contact parts in AISI 316 stainless steel - Unitronics PLC - Pneumatic components from Camozzi and Metal-Work

Leto izdelave: 2008, Stanje: zelo dobro (rabljeno), Kolbenfüllmaschine Hersteller: EFM/LVS Typ: 2-Stationen-Kolbenfüllmaschine mit beheizbarem Trichter und Rührwerk Leistung: max. 3.000 Stück/Stunde Füllbereich: 200 ml – 1.000 ml (einfach manuell einstellbar) Gksdpfx Aeigytijh Djc Abmessungen: L x B x H = 1.700 x 1.100 x 1.900 mm Elektrik: 400 Volt – 50 Hz – 0,75 kW (Rührwerk) Druckluft: mindestens 6 bar Ausstattung: Pneumatisch angetriebener Füller / Logo-PLC / Mobil auf Rollen Optional kann die Maschine mit einem Förderbandsystem und pneumatischer Sterntaktpositionierung geliefert werden.

Stanje: novo, Leto izdelave: 2025, Fully automatic tube filling machine for pastes and liquids. Typically used for cosmetics such as make-up, creams, and general care products like shower gel, hair shampoo, hair gel, toothpaste, sun cream, etc. Suitable for pre-made tubes (closed with a cap) made of plastic. Fully automatic feeding, orientation of the tubes (rotation in the tray) using the print mark, as well as filling and sealing of the tubes. Before filling, the tube is air-rinsed to prevent contamination. The no tube – no fill function is also a standard feature. Water cooling system, batch/date printer, and dosing unit consisting of a pneumatic piston pump and storage tank with level sensor are included. PLC controlled, operated via touchscreen. Optional at extra charge: heated storage tank, agitator for storage tank, additional format sets (trays) for various tube diameters, external tube feeding lift. – Specifications: max. machine cycle speed (idle): 50 cycles/min; filling range: 1-250ml; accuracy: ±1%; tube diameter: 10-50mm (a separate tray is required for each tube diameter); tube length: 50-200mm; number of filling heads: 1; storage tank capacity: 40L; product contact parts made of stainless steel 316L; power supply: 220/380V, power consumption: 7kW; compressed air: 0.4-0.6MPa; machine dimensions: L1950xW760xH1850mm; machine weight: 950kg. Please note that our new prices are often below the usual prices for used equipment. Feel free to send us an inquiry and let us know your packaging requirements. – Generally, 30-50 different new machines are always available from stock for immediate delivery. For custom-built machines, we offer very short lead times, starting from around 3 weeks. – All machines come with a full warranty. Gkjdpfx Aov Nldbeh Djc

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, A Gustav Obermeyer tube filling machine including a SpeMaBa labeller is available. Filling capacity: 15–20 tubes/min, hopper volume: 40L, dosing piston diameter: 35mm (10–100 cm³), tube size: 30mm/150mm, tube material: HDPE/LLDPE, tube diameter range: 5–90mm, tube length range: 65–240mm. Print system: Allen NX 4 (ITW-Diagraph), processed labels: 80mm/77mm, print method: thermal transfer, ribbon: N508SW110 x 600 (Novexx), labelling machine: BBK Rapid SR 160/610-3800 S. Documentation available. On-site inspection possible. Gjdpfx Aheuyk Tgs Dekc

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20037E2006, skupna širina: 700 mm, skupna dolžina: 700 mm, skupna višina: 1.540 mm, vrsta vhodnega toka: trifazni, polnilna masa (maks.): 250 g, polnilna teža (min.): 5 g, priključek za stisnjen zrak: 6 letvica, skupna masa: 500 kg, leto zadnje generalne obnove: 2025, Used Axomatic AXO 700 tube sealing machine suitable for filling and closing aluminum tubes. Operation: This machine automatically fills the tubes, closes the aluminum tubes across 4 folding stations, impresses a code into the seal, and automatically ejects the tubes. The feeding and orientation of the tubes are performed manually. This machine is fully operational and available for demonstration in our showroom. Please contact us to arrange an appointment. Gkjdjwnrrbepfx Ah Doc Technical specifications: - Min/Max diameter of aluminum tubes: 13 – 42 mm - Tube length: 60 to 250 mm - The tube holder with tube is lifted 55 mm above the filling nozzle during filling - Min/Max dosing: 5 – 250 ml - The dosing volume can be set externally and is displayed on a counter - Capacity: max. 1,200 tubes/hour (mechanical speed). The actual achievable capacity depends on the operator, tube quality, and product viscosity - Electric drive with a 0.37 kW electric motor, 380 Volt, 50 Hertz - All product-contact parts are made of 316 stainless steel, suitable for pharmaceutical and cosmetic products - Rotating, height-adjustable table with digital height readout - No tube/no fill system - Coding unit for tubes - Automatic ejection system for tubes - 7-station table - Standard hopper with lid, 55-liter capacity - Machine frame and panels are made of stainless steel, featuring an anti-drip closure at the base to prevent product from entering the drive section - Infinitely variable speed control from the dashboard - Safety doors and enclosure made of a stainless steel frame with plexiglass and door safety interlock - Direct machine drive without chain - Electrical control cabinet integrated into the machine frame

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Norden 700 Sütőtöltő gép műanyag tubusokhoz Kimeneti teljesítménye akár 70 tubus percenként, és úgy tervezték és gyártották, hogy a lehető legmagasabb csomagolási minőségi szabványokat biztosítsa maximális üzemeltetési hatékonyság mellett. Műanyag és laminált tubusok lezárása a Norden szabadalmaztatott forró-levegős lezáró rendszerével lehetséges. Gyártási év: 2006 Típus: 700 Főbb jellemzők: – Termelékenység: 70 tubus/perc – Töltési térfogat: 1–300 ml – Tubus hossza: 50–250 mm – Tubus átmérője: 10–60 mm – Betáplálás: kazettás rendszer Godjv Hxu Uopfx Ah Dekc – Lefúvó töltőfej – Teljesen működőképes állapot

Stanje: novo, Leto izdelave: 2025, Fully automatic tube filling machine for pastes and liquids. Typically used for cosmetics such as make-up, creams, general care products like shower gel, hair shampoo, hair gel, toothpaste, sunscreen, etc. Suitable for pre-made tubes (sealed with caps) made of aluminium. Fully automatic tube infeed and alignment (tube rotation in the trough) based on a print mark, as well as filling and sealing of the tubes. Prior to filling, the tubes are flushed with air to prevent contamination. No-tube-no-fill is also a standard feature. Water cooling system, batch/date coder, and dosing unit consisting of a pneumatic piston pump and storage tank with level sensor are included. PLC controlled, operation via touchscreen. Optional at extra cost: heated storage tank, agitator for storage tank, additional format sets (troughs) for different tube diameters, external tube feeding lift. – Specifications: max. machine cycle rate (idle): 80 cycles/minute; filling range: 1-300ml; accuracy: ±0.5%; tube diameter: 10-50 mm (note, each diameter requires its own trough); tube length: 50-210 mm; number of filling heads: 1; storage tank capacity: 40L; product-contacting parts made of stainless steel 316L; power supply: 220/380V; power consumption: 3.1kW; compressed air: 0.4-0.6MPa; machine dimensions: L2270xW960xH2100 mm; machine weight: 1200kg. Please note that our new prices are frequently below standard used equipment prices. Feel free to enquire and let us know your packaging requirements. – Typically, 30–50 different new machines are immediately available from stock. For machines manufactured to customer specification, we also offer very short lead times starting from approximately 3 weeks. – All machines are available with full warranty. Gsdpev Nldnofx Ah Dokc

Stanje: novo, Leto izdelave: 2025, High-speed tube filling machine for pastes and liquids. Typically used for cosmetics such as make-up, creams, general personal care products like shower gels, shampoos, hair gels, toothpaste, sunscreen, etc. Suitable for pre-made tubes (closed with a cap) made of plastic, aluminum, or coated composite materials. Fully automatic feeding and alignment of tubes (rotation in the holder) based on registration marks, as well as filling and sealing of tubes. Before filling, the tubes are air-flushed to prevent contamination. No-tube-no-fill function is also a standard feature. An external tube feed lift, water cooling system, batch/date printer, and dosing unit (consisting of a pneumatic piston pump and storage tank with level sensor) are included. PLC controlled, operated via touchscreen. Optional at extra cost: heated storage tank, agitator for storage tank, additional format sets (holders) for different tube diameters. Specifications: max. machine output in idle: 160 tubes/minute; filling range: 1–300 ml; accuracy: ±0.5%; tube diameter: 10–50 mm (one holder required per tube diameter); tube length: 50–240 mm; number of filling heads: 2; storage tank capacity: 70 L; all parts in contact with the product are made of 316L stainless steel; power supply: 220/380 V, power consumption: 6 kW; compressed air: 0.6 MPa; machine dimensions: L2870 x W1770 x H2340 mm. Please note that our new prices are often lower than typical used prices. Feel free to inquire and let us know your packaging requirements. – We typically have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approximately 3 weeks. – All machines are available with full warranty. Godpsv Nld Ijfx Ah Dekc

Stanje: novo, Leto izdelave: 2025, Fully automatic tube filling machine for pastes and liquids. Typically used for cosmetics such as make-up, creams, general care products like shower gel, hair shampoo, hair gel, toothpaste, sunscreen, etc. Suitable for pre-made tubes (closed with a cap) made from plastic, metal, or coated composite material. Fully automatic feeding and alignment of the tubes (rotation in the holder) using print marks, as well as filling and sealing the tubes. Prior to filling, the tube is air flushed to prevent contamination. 'No tube, no fill' is also a standard feature. Water cooling system, batch/date printer, and dosing unit, consisting of a pneumatic piston pump and supply tank with level sensor, are included. PLC controlled, operated via touchscreen. Optional at extra cost: heated supply tank, agitator for supply tank, additional format sets (holders) for various tube diameters, external tube feeding lift. Specifications: max. machine speed in idle mode: 65 cycles/minute; filling range: 1-400ml; accuracy: ±0.5%; tube diameter: 10-50mm (a separate holder is required for each tube diameter); tube length: 80-230mm; number of filling heads: 1; tank capacity: 45L; product-contact parts made of 316L stainless steel; power supply: 220/380V, power consumption: 9kW; compressed air: 0.4-0.6MPa; machine dimensions: L2000xW1160xH2100mm. Gjdpfxev Nldue Ah Djkc Please note that our new prices are frequently below common used equipment prices. Feel free to contact us with your packaging requirements. - We typically have 30-50 different new machines available for immediate delivery from stock. For custom-manufactured machines, we offer very short lead times starting from approx. 3 weeks. - All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Fully automatic tube filling machine for pastes and liquids. Typically used for cosmetics such as make-up, creams, and general care products like shower gel, hair shampoo, hair gel, toothpaste, sun cream, etc. Suitable for pre-made tubes (closed with a cap) made of plastic, aluminum, or coated composite material. Fully automatic tube feeding and alignment (rotation in the tray) by print mark, as well as filling and sealing of the tubes. Before filling, the tube undergoes air rinsing to prevent contamination. No tube - no filling is a standard feature. Water cooling system, batch/date printer, and a dosing unit consisting of a pneumatic piston pump and supply tank with level sensor are included. PLC-controlled, operation via touchscreen. Optional at extra cost: heated supply tank, agitator for the supply tank, additional format sets (trays) for different tube diameters, external tube feed lift. – Specifications: maximum machine cycle rate (idle): 80 cycles/minute; filling range: 1-400 ml; accuracy: ±0.5%; tube diameter: 10-60 mm (a tray is required for each tube diameter); tube length: 50-240 mm; number of filling heads: 1; supply tank capacity: 40 L; product-contact parts are made of 316L stainless steel; power supply: 220/380V, power consumption: 9kW; compressed air: 0.4-0.6MPa. Please note that our new prices are often below common used machine prices. Simply inquire and let us know your packaging requirements. - We typically have 30-50 different new machines available for immediate delivery from stock. Additionally, we offer very short lead times for custom-built machines, starting from approximately 3 weeks. - All machines come with full warranty. Gsdpfxev Nldze Ah Dekc