Univerzalne konvencionalne rezkalne stroje za orodja, X-hod 0–399 mm nakup rabljenega (117)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1994, Universal Tool Milling Machine DECKEL FP 1 With 3-axis active digital readout Heidenhain TNC 123 Year of manufacture: 1994 Travel distances: X 300 Y 160 Z 340 mm Spindle speed range: 40 – 2000 rpm Including the following accessories: Rigid angle table 600 mm x 250 mm clamping surface Movable vertical milling head Extendable quill Infinitely variable feed via potentiometer 1 pc. machine vice 1 pc. steady with counter bearing 1 pc. long milling arbor Ø 22 mm, Ø 16 mm, Ø 27 mm Various tool holders S 22 x 2 Z-axis bellows 1 pc. chip guard Machine lamp Automatic central lubrication pump Coolant system Dcsdpew Agxrjfx Afqor Operating manual THE MACHINE IS IN EXCELLENT CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

Stanje: rabljeno, Leto izdelave: 1982, x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm Infinitely variable feeds: 5–500 mm/min Rapid traverse: 1,200 mm/min Spindle speeds: 40 – 2,000 rpm Tool holder: Standard taper 40 Table length: 600 mm Table width: 120 mm Operating voltage: 380 V Frequency: 50 Hz Rated current: 13 A Machine weight approx.: 0.75 t Space required approx.: 1.8 x 1.5 x 1.8 m DESCRIPTION Machine includes: Active 3-axis digital readout HEIDENHAIN Documentation Dcsdpfjvvnfuox Afqsr (Measuring) jaws Vice, etc.

Stanje: rabljeno, Universalni rezkalni stroj DECKEL FP1 Pomik X: 300 mm Pomik Y: 150 mm Pomik Z: 300 mm Horizontalno + vertikalno vreteno Hitrost vretena: od 40 do 2000 RPM Glava nagibna vodoravno Vretenov motor: 2 hitrosti Motor: 1,5 kW Pomiki: X - Z avtomatski / Y ročni Dobavljeno brez mize, le z eno 4-čeljustno koncentrično glavo Ø 140 mm Dodpfjxyymbex Afqscr Napetost: 380 V Širina: 1200 mm Globina: 1200 mm Skupna višina: 1600 mm Teža: približno 900 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis Heidenhain Digital Readout, Original Condition!!! Technical Data: >> Machine No. 56560/08, year of manufacture approx. 1975 Dodpfxsu Nvxms Afqscr >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar system: S20x2 >> Weight approx. 700 kg Ecvf9Jfv9 Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Coolant system About the machine: Offered here is a universal milling machine Deckel FP1 in very good original condition. The Deckel has minimal backlash in the handwheels and all spindles move smoothly. An oil change has been carried out. Mechanically and electrically checked. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the Deckel under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Odlično ohranjeni 5-osni brusilni stroj za orodja naprodaj zaradi neizkoriščenosti! Dodpfx Afexw Sxkeqscr

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Precizna mehanika Weilheim Deckel (Švica) Djdpjxw Npyjfx Afqecr

Stanje: zelo dobro (rabljeno), Leto izdelave: 1979, Deckel FP2 Aktiv, orodjarska rezkalna naprava s 3-osnim Heidenhain TNC 111 Aktiv digitalnim prikazom. Stroj je v zelo dobrem stanju, prihaja iz državnega izobraževalnega oddelka. Fiksna miza, vreteno SK 40. Oprema: različne vpenjalne puše in nosilci rezkarjev, kontrapodpora. Zelo dobro delujoč, pripravljen za uporabo. Možna predstavitev pod napetostjo po dogovoru. Dcedpfx Afoxyhmvjqsr

Stanje: dober (rabljeno), Orodjarska rezkalna stroj - MACMON M100 iz izobraževalne ustanove - Pomiki X/Y/Z 310x340x170 mm - Območje obratov 40-2500 obr/min - Samodejni pomiki / hitri hodi - Orodni držalo ISO 40 Dsdpfx Aoxw T Srofqocr - Vertikalna glava nagibna - Horizontalna / vertikalna rezkalna naprava - Tog kotni stroj 600x215 mm - Naprava za hlajenje - Pogonska moč 2,5 kW - Dokumentacija Mere: D x Š x V 1,5x0,7x1,7 metra Možne napake ali vnosne napake.

Stanje: rabljeno, Univerzalni rezkalni stroj DECKEL FP1 Pomik X: 300 mm Pomik Y: 150 mm Pomik Z: 300 mm Horizontalno + vertikalno vreteno Hitrost vretena: od 40 do 2000 obr/min Velikost mize: 600 x 210 mm Glava nagibna horizontalno Ravna delovna miza Vreteniški motor: 2 hitrosti Motor: 1,3 kW Pomiki: X - Z avtomatsko / Y ročno Napetost: 380 V Širina: 1200 mm Globina z električno omarico: 1200 mm Višina: 1600 mm Dodpfx Afsxxpp Njqscr Teža: pribl. 900 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis Digital Readout K&C, infinitely variable feed, painted in light grey, excellent condition Technical Data: Dedpfxjt Aav Is Afqecr >> Year of manufacture: 1978 Machine No. 2101-0465 >> Fixed angle table >> Spindle speeds: 40 - 2000 rpm >> Infinitely variable feed on 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Rapid traverse >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable 100 mm on column >> Vertical quill and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Equipment and Accessories: >> 3-axis digital readout K&C newly installed with manufacturer's warranty and operating manual. Display unit: Reference points, zero setting, coordinate input, mm/inch switch, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. >> Coolant system About the Machine: For sale is a universal milling machine Deckel FP1 in very good condition. The machine has very little backlash and all spindles move smoothly. All bellows have been replaced. On this newer FP1 model, feed is infinitely variable on two axes; the machine is also equipped with a rapid traverse. An oil change has been performed. Mechanically and electrically inspected. The new K&C digital readout makes working easier and even more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: novo, Leto izdelave: 2025, dolžina podajanja os X: 310 mm, dolžina pomika po osi Y: 170 mm, dolžina podajanja os Z: 340 mm, potovalna razdalja osi X: 310 mm, pomik osi Y: 170 mm, pomik po osi Z: 340 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 55 obr/min, Macmon M100 NC with Heidenhain TNC 128 Year of manufacture: 2025 Dedpfxsxqh Hdj Afqocr The machine is new and can be inspected at any time. The Macmon M100 NC is a compact universal milling machine designed for precise machining tasks in workshops, training centres, and single-part production. Its robust cast construction and backlash-free guides ensure high accuracy and repeatability. Equipped with the Heidenhain TNC 128 control system, the machine allows both manual operation and NC-controlled machining. The cross axis (Y) is CNC-controlled, while both the longitudinal (X) and vertical (Z) axes can be operated manually or automatically. Technical specifications: Control system: Heidenhain TNC 128 Travel distances: Manual operation: X = 310 mm / Y = 170 mm / Z = 305 mm NC-controlled: X = 300 mm / Y = 165 mm / Z = 300 mm Controlled axis: Y-axis (cross axis) Milling head: swivels 0–90° Drive: infinitely variable Operating modes: combinable manual and NC operation Equipment: coolant system, work light, machine cabinet Condition: New (year of manufacture 2025) Immediately available Can be inspected under power at any time

Stanje: rabljeno, Leto izdelave: 1963, Funkcionalnost: popolnoma funkcionalen, potrebna širina: 1.400 mm, zahteva za prostor dolžina: 1.040 mm, potrebna višina: 1.900 mm, Oprema: dokumentacija / priročnik, Kopirni rezkalni stroj v vrhunskem stanju, možen prevzem s strani gravirja. 1 naprava za zmanjševanje in povečavo 1 vrtljiva miza s 3 lukenjskimi ploščami 1 optična tipalna naprava s fiksirnimi čeljustmi 1 pomična miza 1 zglobna svetilka 1 podaljšek za rezkalo 1 nasadni rezkalni trn različne vpenjalne naprave in kopirne predloge Dedpjxw Nn Ajfx Afqocr 9 vpenjalnih tulec za rezkalno vreteno

Stanje: dober (rabljeno), Leto izdelave: 1976, Deckel FP1 orodjarska rezkalna naprava, fiksna kotna miza, SK 40 vpenjalni konus vretena. Zavora vretena, dodatki: nasprotni nosilec, različne vpenjalne puše. Dobro delujoče stanje. Po dogovoru možno prikazati pod napetostjo. Dcsdpfx Asxw T Efofqor

Stanje: delavnici obnovljeno (rabljeno), Deckel FP1 AKTIV (3-axis Aktiv) Machine no. 2102-5745 Year of manufacture: approx. 1988 Travels: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Features: - Aktiv digital readout for 3 axes (HEIDENHAIN TNC 113) - Infinitely variable feed in X, Y, and Z axes - Quill traverse at vertical milling head: 60 mm - Vertical milling head is swiveling and extendable horizontally by 100 mm - Coolant system (coolant tank in machine base) - Documentation - Central lubrication Space requirement (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been visually refurbished and technically tested. Upon request, videos of the geometry can be provided. Dcsdsxpwfgjpfx Afqjr Backlash Y-axis: 0.15 mm Backlash X-axis: 0.3 mm Backlash Z-axis: 0.2 mm Runout horizontal spindle: 0.002 mm Runout vertical spindle: 0.002 mm Deviation parallelism Y-axis: 0.002 mm (measuring length 150 mm) Deviation parallelism X-axis: 0.002 mm (measuring length 300 mm) The following parts have been renewed: - Central lubrication system checked - Heidenhain digital display overhauled - Set of scrapers installed - LEDs in Aktiv display replaced - Oil change - Vertical milling head re-bedded - Oil sight glass replaced Net price ex works, loaded from stock

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout K&C (new) and 3 stepless feed drives – Excellent Condition Technical Data: >> Year of manufacture: 1985 Machine No.: 2102-2867 >> Swivel-tilt rotary table (newly planed) >> Speed range: 40 – 2000 rpm >> Stepless feed drive in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quills – SK40 taper >> Drawbar system M16 >> Weight approx. 800 kg Equipment and Accessories: >> 3-axis digital readout K+C, newly installed with manufacturer's warranty and operating manual. Readout features: setting reference points, zero points, coordinate input, mm/inch switching, absolute or incremental coordinates, circle functions, hole arrays, radius milling functions, etc. >> Coolant system >> Operating manual, spare parts diagram Dsdpfxot Aarpo Afqocr About the machine: Offered is a Deckel FP1 universal milling machine, year 1985, in outstanding condition. The machine has minimal handwheel backlash and all spindles move smoothly. Even at maximum spindle speeds, the machine runs very quietly. On this newer FP1 model, feed drive is steplessly adjustable on all three axes, and rapid traverse is also available. The oil has been changed. Machine has been mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power onsite.

Stanje: dober (rabljeno), Leto izdelave: 1985, Deckel FP1 Aktiv s 3-osnim digitalnim prikazovalnikom Heidenhain, 3 aktivne osi, togata miza, vreteno SK 40 M16. Centralno mazanje, navodila za uporabo. V dobrem delujočem stanju, prihaja iz centra za poklicno izobraževanje. Po dogovoru možno prikazati pod napetostjo. Dsdpfx Aexwunzefqocr

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP1 repowered by FPS, year of manufacture 2010, with 3-axis digital readout Heidenhain ND 780, as new! Technical data: - Machine No.: 2101-51084, year 2011 - Fixed angle table - Spindle speed: 40 - 2000 rpm - Feed on 2 axes - Drive power: 1 / 1.5 kW - Travel X/Y/Z: 300/150/340 mm - Vertical quill SK40 and horizontal quill SK40 - Drawbar system: S20x2 - Weight approx. 700 kg Accessories and equipment: - 3-axis digital readout Heidenhain ND 780 - Hydraulic vice - Collets - Tool holders - Milling cutters - Operating manual - Coolant system About the machine: Offered here is a Deckel FP1 universal milling machine, repowered by FPS, in like-new condition. Included accessories are a hydraulic vice with swivel base, collet chucks, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the Deckel on site under power. The machine is immediately available. Dsdpfx Aewpi Dqofqscr

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis digital readout RSF 2006 Complete Overhaul - TOP Condition Technical Data: >> Machine No. 53819/08 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Power feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill - SK40 >> Spindle brake >> Drawbar type: S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik >> Coolant system >> Machine feet About the machine: Dsdpjvb Ud Uefx Afqocr For sale is a Deckel FP1 universal milling machine in very good condition. The Deckel has very little backlash and all feed screws run smoothly. An oil change was performed. The FP1 underwent a complete overhaul by Huttelmaier in 2006 and has been used only sparingly since then. The RSF digital readout makes operation easier and even more precise. Take the opportunity to inspect and test-run this machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed – Excellent CONDITION Technical Data: >> Year of manufacture: 1984 Machine no.: 2102-2601 >> Swivelling, tilting, and rotating table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm Djdpfsu Racrsx Afqscr >> Vertical and horizontal quill – SK40 >> Draw-in system S20x2 >> Weight: approx. 800 kg Accessories and Features: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Offered is a universal milling machine Deckel FP1, year 1984, in excellent condition. The machine has very little backlash and all lead screws move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed on all three axes and also has rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain control, you can enter measurements that the machine will approach automatically. The FP1 was housed in a training workshop and was only occasionally used. An oil change has been carried out. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F729 Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed Very good CONDITION Technical Data: >> Year of manufacture: 1992 >> Machine number: 2102-6289 >> Rigid angular table (freshly planed) >> Spindle speed: 40–2000 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100 mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Features: >> 3-axis Heidenhain TNC113 digital display Dcjdpfxju T D Nrj Afqor >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Universal Milling Machine Deckel FP1, year 1992, in very good condition. The machine has minimal backlash and all slides move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed on all three axes is infinitely variable, and the machine also features rapid traverse in these axes. A significant advantage is the active 3-axis digital readout. With this Heidenhain DRO, you can enter dimensions and the machine will automatically move to them. The FP1 was previously used in a training facility and was only occasionally operated. Oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our premises.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F736 Dcedou Nvwvspfx Afqsr Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit by FA Huttelmaier Very good CONDITION Technical Specifications: - Year of manufacture: 1985, Machine no. 2102-2891 - Fixed angle table - Spindle speed: 40 – 2000 rpm - Infinitely variable feed on 3 axes - Rapid traverse on 3 axes - Drive power: 1.5 / 1.9 kW - Spindle brake - Travel (X/Y/Z): 300 / 160 / 340 mm - Vertical milling head movable 100 mm on column - Vertical and horizontal quill – ISO 40 taper - Drawbar system S20x2 - Weight approx. 800 kg Accessories & Equipment: - 3-axis digital readout Heidenhain TNC111 - Coolant system - Operating manual, spare parts diagram About the machine: Offered here is a universal milling machine Deckel FP1, year 1985, in very good condition. The FP1 was overhauled in 2008 by the company Huttelmaier. The machine has minimal play on the handwheels and all leadscrews move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, feed is continuously variable on all three axes and, in addition, the machine features rapid traverse on all axes. A major advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions which the machine automatically moves to. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this gem on site under power.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 repowered by FPS, year of manufacture 2010, with 3-axis Heidenhain ND 780 digital readout - Excellent Condition! Technical Data: >> Machine No.: 55249/08, Year: 2010 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Feed on 2 axes Dcedpfx Aoxu Hbhefqjr >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar thread S20x2 >> Weight approx. 700 kg Accessories and Features: >> 3-axis digital readout Heidenhain ND 780 >> Hydraulic machine vice >> Collets >> Tool holders >> Milling cutters >> Operating manual >> Coolant system About the Machine: Offered is a Deckel FP1 universal milling machine, professionally repowered by FPS and in like-new condition. The accessories include a hydraulic machine vice with swivel base, collets, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout enables easier and more precise work. Take the opportunity to inspect and test the Deckel on site under power. The machine is available immediately.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 with 3-axis Active Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed in TOP Condition Technical data: >> Year of manufacture: 1979 Machine no.: 2202-10777 >> Rigid angle table (newly planed) >> Spindle speed: 25 – 2500 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 2.2 kW >> Spindle brake >> Travels X/Y/Z: 400/220/400 mm >> Vertical milling head on spindle carrier, adjustable by 150 mm Dcjdpfx Afsuc Ubwoqor >> Vertical and horizontal quill – SK40 extendable >> Drawbar thread: S20x2 >> Weight approx. 1400 kg Accessories and equipment: >> 3-axis TNC 113 Active Digital Readout by Heidenhain >> Coolant system >> Central lubrication About the machine: For sale is a Deckel FP2 universal milling machine in excellent condition. The FP2 comes from the laboratory of a government facility where it was rarely used. The machine exhibits minimal backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this later FP2 model, the feed can be infinitely adjusted on all three axes, and rapid traverse is available on every axis. A major advantage is the active 3-axis digital readout. Using the Heidenhain path control, you can enter dimensions that the machine then approaches automatically. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. You are welcome to inspect and test the machine under power on site.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed As-New CONDITION Technical Data: >> Year of manufacture: 1987 Machine no. 2102-3536 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake Dcodpsu R D I Sjfx Afqjr >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle support adjustable by 100 mm >> Vertical and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Automatic central lubrication >> Machine lamp >> Coolant system >> Operating manual, spare parts catalogue About the machine: Offered here is a Deckel FP1 universal milling machine, year 1987, in an as-new, original condition. The machine has very minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed can be infinitely adjusted on all three axes, and the machine also features rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position control, you can enter dimensions which the machine then approaches automatically. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. The machine has been mechanically and electrically inspected. Thanks to the Heidenhain digital readout, working with the machine is easier and even more precise. Take the opportunity to inspect and test this gem on site under power.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed, Light Grey, Excellent Condition Technical Data: >> Year of manufacture: approx. 1990, Machine No. 2102-5231 >> Fixed Angle Table >> Spindle Speed: 40 – 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm Djdpexu E R Iefx Afqecr >> Vertical milling head on spindle mount, adjustable by 100 mm >> Vertical quill and horizontal quill – SK40 taper >> Drawbar system M16 >> Weight: approx. 800 kg Accessories and Features: >> 3-axis Heidenhain TNC113 digital readout >> Centralized electric lubrication >> Coolant system >> Operating manual and spare parts diagram Details about the Machine: Offered is a Deckel FP1 universal milling machine in very good condition, finished in light grey. The machine has minimal backlash, and all feed screws move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed in all three axes, as well as rapid traverse in these directions. A major benefit is the active 3-axis digital readout. With the Heidenhain positioning control, you can enter target dimensions, and the machine will automatically move to them. This FP1 was used in a training workshop where it saw only occasional use. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this outstanding machine under power on site. The machine is available immediately.