Rezkalni stroj za orodje

Mikron WF2SA

Leto izdelave: 1987, stanje: dober (rabljeno), Mikron WF2SA tool milling machine with 3-axis Heidenhain Aktiv digital readout. Fixed angle table, SK 40 spindle taper. In operational condition. The machine can be demonstrated under power by prior arrangement. Codpfxoqttt Ts Aiqshc

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1987, Univerzalni orodjarski rezkalni stroj Znamka: DECKEL Model: FP 2 Aktiv Leto izdelave: 1987 - obnovljen, na novo prebarvan z novo elektroinštalacijo stroja RAL7035 svetlo siva / RAL7012 bazaltno siva RAL5008 sivo-modra Št. stroja: 2202-11579 Tip rezkalne glave: 2271 Številka rezkalne glave: 300-3606 z garancijo Cedpfx Aijx A Eddjqjhc geometrijski prevzem s preizkusnim protokolom Dodatna oprema: - 3-osni aktivni digitalni prikaz HEIDENHAIN TNC 113 - Fiksna miza 660 x 380 mm (T-utor: 12 mm) - Vertikalna rezkalna glava SK 40 z vlečnim navojem S 20 x 2 - Centralno mazanje, ročno upravljano - Hladilna naprava - Navodila za uporabo - rabljeno, kot je vidno -

Stanje: dober (rabljeno), Leto izdelave: 1990, 1 used universal tool milling machine Manufacturer: Mikron Model: WF 2 SA Year of manufacture: 1990 Chjdpfxorywgze Aiqjc Equipped with Heidenhain Aktiv digital display TNC 114 Infinitely variable feed Lamp Coolant system Travel (X / Y / Z): 420 / 250 / 345 mm Spindle speed: 50 - 2240 rpm Clamping surface: 635 x 250 mm Feed rate in 3 axes: 0 - 750 mm/min Rapid traverse in 3 axes: 1400 mm/min Spindle taper: ISO 40 Vertical/horizontal quill extendable Dimensions approx. 1.2 x 1.2 x 1.6 m Weight approx. 1200 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 585 mm, pomik osi Y: 185 mm, pomik po osi Z: 320 mm, skupna višina: 2.245 mm, skupna širina: 1.340 mm, skupna dolžina: 1.140 mm, širina mize: 240 mm, dolžina mize: 1.000 mm, vrsta vhodnega toka: trifazni, največja hitrost vrtenja: 2.000 obr/min, vrtljajska hitrost (min.): 100 obr/min, skupna masa: 1.000 kg, delovno območje: 650 mm, vhodna napetost: 400 V, razdalja od mize do središča vretena: 370 mm, vhodna frekvenca: 50 Hz, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Vrtalna zmogljivost jekla ----- 50 mm Rezkalna zmogljivost jekla ----- 25 mm Obodna rezkalna zmogljivost ----- 100 mm Premik v vzdolžni smeri (X) ----- 585 mm Premik v prečni smeri (Y) ----- 185 mm Premik v višini (Z) ----- 320 mm Horizontalni motor ----- 1,5 kW Vertikalni motor ----- 2,2 kW Horizontalno rezkalno vreteno ----- 60 ~ 1350 obr/min (9) Vertikalno rezkalno vreteno ----- brezstopenjsko 100-600 / 350-2000 obr/min Vpenjanje vretena ----- ISO 40 Miza ----- 1000 x 240 mm Teža ----- 1000 kg VKLUČUJE * DELTA frekvenčni pretvornik * 3-osni digitalni prikaz SINO * Avtomatski vzdolžni in prečni pomik delovne mize * LED osvetlitev * Hladilni sistem Codpfx Aiega Twfoqjhc * Luksuzna upravljalna omarica * Nagibna rezkalna glava levo/desno 0 - 45 stopinj * Zasučna delovna miza * Razni držala v kovčku

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, dolžina podajanja os X: 650 mm, dolžina pomika po osi Y: 500 mm, dolžina podajanja os Z: 475 mm, širina mize: 450 mm, dolžina mize: 1.530 mm, obremenitev mize: 350 kg, X-os: 650 mm Y-os: 500 mm Z-os: 475 mm Dolžina mize: 1530 mm Širina mize: 450 mm Nosilnost mize: 350 Hitrost vretena: 55 - 4000 obr/min Pomik po X-osi: 6000 mm/min Cjdpfx Ajxtbkujiqjhc Pomik po Y-osi: 6000 mm/min Pomik po Z-osi: 3000 mm/min Dolžina: 2300 mm Širina: 2550 mm Višina: 2200 mm Teža: 2850 kg Prosimo, upoštevajte: Podatki na tej strani so bili po najboljših močeh pridobljeni od nas in, kjer je bilo mogoče, od proizvajalca. Podatki so navedeni v dobri veri, vendar točnosti ni mogoče zagotoviti. Zato ne predstavljajo uradne ponudbe ali pogodbenih pogojev. Priporočamo, da preverite vse bistvene podrobnosti.

Stanje: dober (rabljeno), Skladiščna številka: 3010 Proizvajalec: Deckel Številka stroja: 31488 Tip / Model: FP 1 Pomiki x-y-z: 300 - 150 - 340 mm Miza: 600 x 200 mm Območje vrtljajev: 40 do 2.000 obr/min Vreteno: MK 40 Pomiki: 16 do 500 mm/min Priključna moč: 1 / 1,5 kW Dodatki/Oprema: digitalni prikaz Elesta Stanje: dobro Teža: 0,8 t Dimenzije: 800 x 1.000 x 1.800 mm Csdpfow D N Thjx Aiqehc

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed – Excellent Condition, CE Compliant Technical Data: Chodpfx Aijzbb E Aoqjc - Year of manufacture: 1990 Machine no.: 2102-5046 - Fixed angle table - Spindle speed: 40 – 2000 rpm - Infinitely variable feed in 3 axes - Rapid traverse in 3 axes - Drive power: 1.5 / 1.9 kW - Spindle brake - Travel (X/Y/Z): 300/160/340 mm - Vertical milling head adjustable on spindle carrier by 100mm - Vertical quill and horizontal quill – SK40 - Drawbar system S20x2 - Weight: approx. 800 kg Accessories and Equipment: - 3-Axis Heidenhain TNC 113 Digital Readout - Coolant system - Machine lamp - Operating manual & spare parts list About the machine: Offered here is a universal milling machine Deckel FP1, CE compliant and in excellent condition. The machine has very little backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, the feed is infinitely variable in all three axes, and rapid traverse is also available on them. A major advantage is the active 3-axis digital readout. With the Heidenhain TNC 113 control, you can input dimensions and let the machine automatically travel to those positions. This FP1 was used in a training workshop and was only operated occasionally. Oil has been changed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes working easier and more precise. Take the opportunity to inspect and test the machine on site under power.

Stanje: rabljeno, Leto izdelave: 2006, x-travel 320 mm y-travel 240 mm z-travel 300 mm Total power requirement 3 kW Machine weight approx. 1 t O F F E R We can offer you, subject to prior sale and errors excepted, from stock, without obligation: STIMIN Universal Tool Milling Machine with Digital Readout Model FUS-22-2M Year of manufacture 2006 539 _____ Working area: Longitudinal travel X-axis 320 mm Cross travel Y-axis 240 mm Vertical travel Z-axis 300 mm Clamping surface 320 x 670 mm Table load capacity approx. 75 kg Tool holder SK 40 18 spindle speeds 45 – 2240 rpm Quill stroke 60 mm Feeds X / Y - axis, stepless 2 - 1,600 mm/min Chsdewp S Sdspfx Aiqsc Feeds Z - axis, stepless 2 - 1,000 mm/min Spindle drive power 1.5 kW Total drive approx. 3 kW - 400 V – 50 Hz Weight approx. 1,000 kg Accessories / Special Equipment: • Manual handwheels on all 3 axes for conventional milling • Additionally equipped with a digital readout (ACU RITE) for all 3 axes • Fixed angle table 320 x 670 installed • Swivel-type vertical milling head, + / - 90° tiltable • Rigid machine structure with sturdy design • Work light, coolant device, swiveling control panel, chip tray, operating instructions • The universal milling machine also complies with CE standards, making it particularly suitable for training workshops or other businesses. Condition : Very good condition! With manual operation, this is the ideal machine for training workshops or small batch production! Delivery : ex stock, immediate, FCA Metzingen Payment : strictly net - after receipt of invoice Click here for a video of the machine: We always have a wide selection of conventional and CNC milling machines in stock!

Stanje: pripravljen za uporabo (rabljen), x-Weg 510 mm y-Weg 450 mm z-Weg 410 mm Aufnahmekegel der Hauptspindel MAS BT 45° (SK40) Tischaufspannfläche 800 x 395 mm T-Nuten 6 Stk. Drehzahl 50 - 2500 U/min Vorschub stufenlos 4-1600/4-1000 mm/min Spannung 400 V Gesamtleistungsbedarf 5.0 kW Maschinengewicht ca, 1400 kg Abmessung L-B-H 2300 x 2300 x 1800 mm aus einer Ausbildungswerkstatt gepflegter Zustand (!!) - im überprüften Zustand - Maschinenvideo - ?v=iSTVEdv2fO8 Ausstattung : - robuste Universalfräsmaschine Chsdpfexaam Uox Aiqec - schwenkbares Bedienpult, rechts vorne - drehbarer Universalfräskopf (re/li = 90°) * mit hydraulischer Werkzeugklemmung - manueller Frässpindelvorschub, mit Feststellung - schwenkbarer Frässpindelschutz - stabiler T-Nuten Aufspann-/Winkeltisch - Achsenvorschübe mit Eilgang - Zentralschmiereinheit - Schaltschrank, links verbaut * Digitalanzeige - ohne Funktion

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, Universal milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control system: Deckel Dialog Control 4: - 3D path control, including drilling and milling cycles - Monitor, electric hand-held control panel - Terminal for program input and output Technical data: Travel range X/Y/Z: 300 x 220 x 400 mm Speed: 31.5 – 3,150 rpm with 21 gear steps Feed rate: 4–2,000 mm/min Rapid traverse: 4 m/min Drive power: 1.6–2.0 kW Tool holder: SK 40 Hydraulic tool clamping Universal milling table with digital readout: - Clamping surface: 600 mm x 320 mm - Table load: 180 kg - C-axis rotation: 360° - A-axis tilt: 15°/45° - B-axis swivel: +/- 45° Chodpfxewid Sps Aiqoc Vertical milling head: - Quill travel by hand – horizontal 65 mm, vertical 60 mm Additional equipment: - Manual machine handwheels with scale - Direct travel measurement of NC axes - Coolant system Special accessories: - Approx. 33 tool holders (without tools) – see photo - High-speed milling spindle Machine data: - Machine weight approx. 1,380 kg - Required space incl. ancillary components: L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm - Power connection: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected under power and cutting operation by appointment.