10000 40 nakup rabljenega (23.996)

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4016, vrsta goriva: dizel, število valjev: 16, vrtljajska hitrost (min.): 1.500 obr/min, največja hitrost vrtenja: 1.800 obr/min, skupna masa: 700 kg, skupna dolžina: 2.200 mm, skupna širina: 500 mm, skupna višina: 800 mm, vrsta hlajenja: voda, Blok motorja s podporami ležajev ročične gredi. Kupljen po pomoti za obnovo agregata – nikoli uporabljen, shranjen v škatli v suhem skladišču. Kot nov. Ustreza vsakemu 16-valjnemu motorju agregata Perkins serije 4000. Kdedpfsu Rmt Djx Af Tjg

Stanje: rabljeno, Swing diameter over bed: 2400 mm Swing diameter over cross slide: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Maximum workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over cross slide: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock face plate: 300 - 1600 mm with special jaws up to 2050 mm Clamping diameter in tailstock face plate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Ksdpfx Aoxddvnof Tedg Main Drive, Face Plate Face plate diameter: 2000 mm Face plate speeds, steplessly variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Center angle of flange-mounted centers: 70° Support Travel of parting slide: 500 mm Travel of facing slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, facing: 800 mm/min Feeds stepless, longitudinal: 0.6 - 300 mm/min Feeds stepless, facing: 0.3 - 120 mm/min Max. cutting force on support: 20,000 kg Tailstock Face plate diameter (removable): 1650 mm Clamping diameter of face plate: 1400 mm Center angle of flange-mounted centers: 70° Rapid traverse: 1250 mm/min Special Features Copying device for first support Copying length: 8,500 mm Max. copying depth in one stroke: 500 mm Boring device: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one stroke: 2,700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rule for taper turning, setting angle up to 8° and maximum taper length (in one stroke) of 2000 mm, setting accuracy ± 5 minutes. A guide rule for taper turning, setting angle up to 15° and maximum taper length (in one stroke) of 1000 mm, setting accuracy ± 5 minutes. 125 kg auxiliary crane on the headstock.

Stanje: zelo dobro (rabljeno), Weishaupt RGMS 40 dual-fuel burner, gas + heavy oil. 2600 W Kodpfxsmnqbto Af Tedg

Stanje: generalkompletno obnovljen (rabljeno), kapaciteta baterije: 620 Ah, napetost baterije: 80 V, skupna višina: 784 mm, skupna dolžina: 1.025 mm, skupna širina: 708 mm, Tested forklift battery for your forklift – 80V 4PZS 620AH – DIN A + 1-year warranty + Incl. aquamatic (automatic watering system) + Incl. end connectors & REMA 320 plug (other plugs can be installed upon request) + Capacity: min. 90-100% (C5 capacity report will be included upon delivery) + Year of delivery: 2024 Dimensions: Length: 1,500 mm Width: 708 mm Height: 784 mm Weight: approx. 1,600 kg Suitable for the following models and others: Linde E 20 - 325-00 Linde E 20 / 600 - 387-00 Linde E 20 / 600 H - 1252-01 Linde E 20 / 600 H - 387-00 Linde E 20 / 600 RH - 387-00 Linde E 20 H - 387-00 Linde E 20 HOCH - 325-00 Linde E 20 HOCH - 336-00 Linde E 20 P - 325-00 Linde E 20 Z - 325-00 Linde E 25 - 325-00 Linde E 25 - 336-00 Linde E 25 - 387-00 Linde E 25 / 600 - 387-00 Linde E 25 / 600 H - 1252-01 Linde E 25 / 600 H - 387-00 Linde E 25 / 600 RH - 387-00 Linde E 25 CH - 387-00 Linde E 25 H - 387-00 Linde E 30 CH - 387-00 Linde E 30 H - 387-00 Linde E 30 P - 325-00 Linde E 30 SH - 1276-00 Linde E 35 - 337-00 Linde E 35 - 337- Linde E 35 P - 337-00 Linde E 40 P - 337-00 Linde K - 5231-00 Linde K - 5231-00 - side load Linde K 12 - Linde K 15 - Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side load Linde P 250 SWB - 5007-10 - vertical change Still MX-X Still R. 07-25 Still R 60-20 Still R 60-22 Still R 60-25 Still RX 60-25 Still RX 60-30 Jungheinrich EFG 25 Jungheinrich EFG 425 Jungheinrich EFG 425 K Jungheinrich EFG V 25 Jungheinrich EKX 515 Jungheinrich EKX 515 K Jungheinrich EKX 525 K Jungheinrich ETX Toyota 7FBMF20 Toyota 7FBMF25 Toyota 8FBMKT25 Kdedswzvy Nspfx Af Tsg Toyota 8FBMKT30 Toyota FBM25 Toyota FBMF20 Toyota FBMF25 Crown TSP 6000 - B Crown TSP 6000 - C Crown TSP 7000 Atlet EH 25 Balkancar EV715 Balkancar EV720 Clark GEX25 Heli CPD 30 Heli CPD 35 Hubtex MQ 40 Hyster E5XN Hyster J2.0 Hyundai 25BHA7 Mitsubishi FB25CN Nissan 1Q2L25Q Nissan QX25 Common battery sizes available – please inquire. Transport possible.

Stanje: generalkompletno obnovljen (rabljeno), kapaciteta baterije: 775 Ah, napetost baterije: 80 V, skupna višina: 784 mm, skupna dolžina: 1.024 mm, skupna širina: 852 mm, Tested forklift battery for your forklift truck – 80V 5PZS 775AH – DIN A + 1-year warranty + Including Aquamatic (automatic water refilling system) + Including end cell connectors & REMA 320 plug (alternate connectors available on request) + Capacity: minimum 90–100% (C5 capacity test protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,024 mm Width 852 mm Height 784 mm Weight: approx. 1,920 kg Suitable for the following (and other) models: Linde E25-325-00 Linde E25/600-336-00 Linde E25/600 HL-387-00 Linde E25/600 RHL-387-00 Linde E25/600 S-336-00 Linde E25 H-387-00 Linde E25 Hoch-336-00 Linde E25 SH-1276-00 Linde E30-325-00 Linde E30/600-336-00 Linde E30/600-RHL/HL-387-00 Linde E30/600 S-336-00 Linde E30 H-387-00 / Hoch Linde E30P-325-00 Linde E30 SH-1276-00 Linde E35/600H-388-00 Linde E35 H-/HL-387-00 Kdedjwzvxrepfx Af Teg Linde E35 P-337-00 Linde E35 RHL-387-00 Linde E35 SH-1276-00 Linde E40-337-00 Linde E40 C-388-00 Linde E40 P-337-00 Linde E45/C/600H-388-00 Linde K 5231-00 / side loader Linde P250-127-00 Linde P250L-127-05 Still R60-30 Still RX60-25/-30/-30L/-35/-40 Crown TSP 6000-C/-D Crown TSP 7000 Jungheinrich EFG 430 Jungheinrich EFG 530 Jungheinrich EFG 535 Jungheinrich EFG 540 Jungheinrich EFG 545 K Jungheinrich EFG 550S Jungheinrich EFG V25 Jungheinrich EKX 516 Toyota 7FBMF30/35 Toyota 8FBMKT20 Toyota 8FBMT25/30 Atlet EH20/25/30 Caterpillar EP30K/FB30/35KPAC Cesab B635A Cesab Blitz350 Clark GEX30 Daewoo B30-32X Daewoo B35X-5 Hubtex MQ Hyundai 30BHA-7 Magaziner EK1500/2000 Mitsubishi FB25N Mitsubishi FB30K PAC Mitsubishi FB35K Mitsubishi FB 35N Nissan QX30 Steinbock-Boss PE30D TCM FHB25-E1L Yale ERP 30VL Common battery sizes available, please inquire. Transport can be arranged.

Stanje: zelo dobro (rabljeno), Profesionalni digitalni mikrometer priznane znamke Mahr – model Micromar 40 EWR(i) – namenjen izjemno natančnim meritvam z nat natančnostjo do 0,001 mm. Naprava v izvedbi IP65, odporna na prah in vodo, idealna za uporabo v metrologiji, kontroli kakovosti in industrijskih delavnicah. . Merilno območje: 100 – 125 mm . Natančnost: 0,001 mm . Digitalni prikaz z velikim, preglednim LCD zaslonom . Zaščitna stopnja: IP65 – odpornost na prah in škropljenje . Funkciji „ABS“ in „Hold“ – hitro zaustavljanje merjenja in funkcija ničljenja . Visoka togost ohišja, ergonomski oprijem . V kompletu originalna škatla, certifikat, navodila za uporabo ter 100 mm merilni vzorec . Stanje: praktično novo / uporabljeno samo za testiranje Ksdpfx Afexl Rgis Todg

Stanje: zelo dobro (rabljeno), Precizni delavniški mikrometer priznane nemške znamke Mahr, model Marameter M, namenjen za zelo natančne meritve zunanjih premerov v območju 0–40 mm. Naprava je v zelo dobrem stanju, popolnoma funkcionalna, shranjena v originalnem zaščitnem lesenem kovčku. Specifikacije: • Merilno območje: 0 – 40 mm • Tip: Marameter M • Proizvajalec: Mahr (Nemčija) • Kataloška številka: 3206064 • Namen: natančno merjenje zunanjih premerov / gredi / cilindričnih elementov • Kovinsko, proti obrabi odporno ohišje • Roka z zamenljivimi merilnimi nastavki • Visoka stabilnost in ponovljivost meritev • V kompletu originalna lesena škatla Stanje: • Rabljeno, odlično ohranjeno • Zadnja kalibracija: 2023 • Pripravljen za uporabo v merilnici ali laboratoriju. Kdodpfsxmlgtjx Af Tsg

Stanje: zelo dobro (rabljeno), Profesionalni zunanji mikrometer priznane znamke Mahr, namenjen natančnim meritvam v industriji, delavnici in laboratoriju. Naprava se odlikuje z visoko natančnostjo ter robustno izdelavo, velik LCD zaslon pa omogoča hiter in enostaven odčitek rezultatov. . Merilno območje: 25–50 mm / 1–2” . Ločljivost: 0,001 mm (1 µm) . Funkcije: ZERO, ABS, REL, TOL . Razred zaščite: IP65 – odpornost na prah in brizganje vode . Napajanje: baterija CR2032 (3 V) . Ergonomična, natančna konstrukcija iz kaljenega jekla . Pregleden LCD zaslon . Kataloška številka: 4157042 . Proizvajalec: Mahr GmbH – Nemčija V kompletu: . Digitalni mikrometer Mahr Micromar 40 EWR-S . Merilni standard . Nastavitveni ključ . Dokumentacija in navodila za uporabo . Originalen transportni kovček Stanje naprave: zelo dobro – popolnoma tehnično brezhibna in pripravljena na uporabo. Odlična izbira za industrijske obrate, precizne delavnice in merilne laboratorije. Kdedoxl Rf Sjpfx Af Tog

Stanje: zelo dobro (rabljeno), For sale: SK40 tool holders, milling heads, drill chucks, and cutting tools. Condition: used, in good technical condition. Available brands: * Haimer * Wohlhaupter * Schunk * Sandvik * Iscar * Garant * Fahrion * Gewefa * WTE * Kelch * WNT Kjdpjw Hl Sxsfx Af Todg * Atorn * Bahmüller * Eroglu * Holex * LLambrich * Weldon * i-tec * Zurn Germany - Drill chucks, facing heads, tool holders with coolant supply, and many other items. 🛠️ Some sets include milling cutters, drills, and turning tools. - Price listed per holder as shown in photos 1-2, Haimer 60€/piece.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2004, skupna masa: 32.500 kg, lastna masa: 3.800 kg, skupna dolžina: 12.200 mm, skupna širina: 2.440 mm, skupna višina: 2.600 mm, nosilnost: 28.700 kg, širina odprtine vrat: 2.280 mm, višina odprtine vrat: 2.260 mm, notranja višina: 2.350 mm, notranja dolžina: 12.000 mm, notranja širina: 2.330 mm,

Stanje: zelo dobro (rabljeno), Technical Data for Locking Angle Bracket: Manufacturer: SSI Schäfer Included in delivery: 01x Locking angle bracket, used Material color: Sendzimir galvanized Leg "A": approx. 35 mm Leg "B": approx. 53 mm (bearing surface, see description) Including spacer block (grey) Kdodpfxopgndge Af Teg Internal dimension "C": approx. 22 mm Material thickness: approx. 2.00 mm Weight per piece: approx. 0.120 kg Note: Thanks to the included spacer block, the Z-bracket can be used for various beam widths from 40 to 60 mm! Quick Overview / Areas of Application: - Without spacer block for beam width 60 mm (e.g. INP) - With spacer block (short side inside) for beam width 50 mm (INP or box profile) - With spacer block (long side inside) for beam width 40 mm (INP or box profile) General information about the item: This item is only available for collection. Any shipment or transportation of this item will incur additional costs, which can be requested from us separately depending on the delivery location and scope of delivery.

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7620 Kdedpfx Aowbz Husf Teg TEHNIČNI PODATKI - širina valja: 410 mm - dolžina miz: 2220 mm - litoželezne mize - obe mizi nastavljivi - originalno litoželezno vodilo - motor približno 3 kW - dimenzije d/š/v: 2220x800x1140 mm - teža: 504 kg PREDNOSTI – nemška proizvodnja – rabljeni skobljični stroj – zelo dobro stanje Neto cena: 6900 PLN Neto cena: 1640 EUR po tečaju 4,2 EUR (Cene se lahko spremenijo ob večjih nihanjih tečaja)

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7587 Tehnični podatki: - širina valja: 410 mm - število nožev: 3 kos - zavora - dolžina miz: 2540 mm - železne mize - obe mizi nastavljivi - originalno železno vodilo nastavljivo po kotu - motor: 3 kW - dimenzije (d/š/v): 2540x1000x1050 mm - teža: 730 kg Kdodpfx Afeyardmo Tog Prednosti: – Poljska proizvodnja – 3-nožni valj – Rabljeni skobeljni stroj – Zelo dobro stanje Neto cena: 7.900 PLN Neto cena: 1.880 EUR Neto cena izračunana po tečaju 4,2 PLN/EUR (v primeru večjih nihanj tečaja se lahko cena spremeni)

Stanje: zelo dobro (rabljeno), CATALOG NUMBER 7541 Technical specifications: - Max main saw blade diameter (without scoring unit): 400 mm - Max main saw blade diameter (with scoring unit): 350 mm - Saw blade bore diameter: 30 mm - Max cutting height with 400 mm blade: 90° – 120 mm, 45° – 85 mm - Max cutting height with 350 mm blade: 90° – 95 mm, 45° – 67 mm - Main blade adjustable vertically and for bevel cuts - Saw blade guard included - Equipped with side sliding table - Cutting length on sliding table: 1700 mm - Cutting width on sliding table: 1400 mm - Cutting width at rip fence: 1350 mm - Main motor: 6 kW - Table dimensions: 1190 x 990 mm - With table extension: 1880 mm - With table elongation: 1890 mm - With scoring unit - Max scoring blade diameter: 120 mm - Scoring spindle diameter: 20 mm - Scoring motor: 0.75 kW - 3 spindle rotation speeds: 3500, 4500, 6000 rpm - Brake - Extraction port diameter: 80/120 mm - Dimensions (LxWxH): 3050 x 2200 x 1600 mm - Weight: 800 kg ADVANTAGES – Manufactured in Poland – DTR technical documentation included – Saw blade guard – With scoring unit – With table extension and enlargement – Used saw, very good condition Kjdpfjyaq Nhsx Af Todg Net price: PLN 15,900 Net price: EUR 3,780 (based on an exchange rate of 4.2 EUR) (Prices subject to change with significant exchange rate fluctuations.)

Stanje: rabljeno, dvižna višina: 35.000 mm, Leto izdelave: 2023, Pogon: kolo Lastna teža: 29.900 kg Dvižna zmogljivost: 19.640 kg Serijska številka: 1190603 Stanje prednjih pnevmatik: 0 Stanje zadnjih pnevmatik: 0 Kdsdpfxotr H Tco Af Tog Transportne dimenzije (D x Š x V): 9,99 x 2,55 x 3,95 Za več informacij se obrnite na PFEIFER GROUP.

Stanje: dober (rabljeno), Hohner Economy 25/40 Žična Šivalka Zelo dobro ohranjena. Zanesljiv stroj z legendarno vzdržljivostjo. Tehnične specifikacije: Kapaciteta: 206 ciklov/min Debelina šivanja: 25 mm (prebijanje do 40 mm brez zapiranja sponke od spodaj) Kjdjx N I N Sepfx Af Todg Premer žice: maks. 1 mm Napajanje: 380V Teža: 240 kg Stroj ima nastavljivo mizo za šivanje blokov in knjižic.

Stanje: dober (rabljeno), Knjigovezni stiskalnik 50×40 z osnovo Stroj je popolnoma delujoč in pripravljen za uporabo. Kdedpfxex N D Tys Af Tog Format: 500×400 mm Tlak: 5 ton

Leto izdelave: 2008, Stanje: zelo dobro (rabljeno), Centrifugal Vertical Cantilever Pump Chemical Pump FIP ALFA 65-40 V2CM Year of construction: 2008 DN: 50 Rated flow: 40 m³/h Rated head: 45 m Pressure [bar]: 16 Temperature [°C]: -25 ÷ +140 Speed: 1470 rpm Electrical power: 16.5 kW 400V 50Hz 34.7 A Motor speed: 1470 rpm Design: Vertical, axially split volute casing pump. Sump pump or channel impeller design. Applications: Handling of varnishes, aggressive liquids, and process fluids, even in the presence of suspended solid particles, for use in the chemical and petrochemical industries. Kjdoh Rwbrjpfx Af Tsdg Length: 1700 mm Width: 700 mm Weight: 450 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, volumenski pretok: 42 m³/h, moč: 1,5 kW (2,04 KM), Rietschle VLT 40 Vacuum Pump 42 m³/h 150 mbar ELMO Rietschle Vacuum Pump PICO 40 m³/h for sale Year of manufacture: 2007 Mains voltage: 230/400 V 50 Hz 5.2/3 A IP55 Total power: 1.5 kW Speed: 1420 rpm Weight: 52 kg Kjdpjrhwprjfx Af Todg Air delivery: 42/50 m³/h

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, skupna masa: 800 kg, skupna širina: 600 mm, skupna dolžina: 820 mm, skupna višina: 1.600 mm, vhodna napetost: 400 V, Used Liebert NX 40 kVA / 32 kW 3-phase UPS battery backup system (tested, with good batteries) Rated Power: 0.8 PF: 40 kVA Output Power: 32 kW Battery Battery type: VRLA 40x YUASA NPL24-12 | 12 V 24 Ah Dimensions Width: 600 mm Depth: 825 mm Height: 1600 mm Weight (approx.): 341 kg (without batteries) Input Specifications Rectifier type: IGBT-based, vector-controlled PFC (Power Factor corrected) Input voltage (rectifier): 380 / 400 / 415 VAC (400 V nominal), 3-phase, 3-wire Input voltage (bypass): 380 / 400 / 415 VAC (400 V nominal), 3-phase, 4-wire (Ph+N) Permissible input voltage range (rectifier): 305 to 477 VAC Input frequency: 50 or 60 Hz Permissible input frequency range (rectifier): 40 to 70 Hz Input current THD at nominal voltage: < 3%* without filter Input power factor at nominal voltage: ≥ 0.99* without filter Flexi Power Walk-In: 5 to 30 seconds (selectable) Output Specifications Inverter type: IGBT-based, vector, repetitive and PI-controlled Output power: 24 / 32 / 48 / 64 kW Output voltage: 380 / 400 / 415 VAC (400 V nominal), 3-phase, 4-wire (Ph+N) Output voltage regulation: +/- 0.5% (3-phase RMS average) Kodpfxot H Irls Af Tsdg Output frequency: 50 or 60 Hz Output frequency regulation: +/- 0.05% Output voltage THD at nominal voltage: 1% (max.) High crest factor load handling capability: 3 : 1 (per IEC 62040-3) Step load handling capability: 0-100 or 100-0 Transient recovery: < 0.5 ms (recovery to 95% voltage level) 10 ms (recovery to 99% voltage level)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Servomotor, elektromotor, enosmerni motor, servo zobniški motor, sinhronski motor Kdedpfx Afoxvpacj Tsg -Proizvajalec: Beckhoff Neugart, servo zobniški motor z zavoro -Motor: Beckhoff tip: AM8022-0D11-0000 -Napetost: 400 V -Moč: 0,59 kW -Hitrost vrtenja: 8000 min⁻¹ -Reduktor: Neugart tip PLE080-040-SSSA3AE-Z9 -Gred: Ø 20 x 35 mm -Zaščitni razred: IP54 -Zavora: 11 W -Za tehnične podatke si oglejte tablico na fotografijah -Mere: 320/80/V100 mm -Teža: 4,2 kg

Stanje: dober (rabljeno), V obsegu dobave je vključeno: 01x CS-profil, rabljen Barva materiala: sendzimir pocinkano Skupna dolžina: 5.550 mm Dimenzije profila: CS 250 x 50 x 40 mm Debelina materiala: cca 2,5 mm Kjdpsx R Ambefx Af Tjdg Vaši kontakti v našem podjetju: G.: Andre Evering G.: Mario Klöver G.: Falk Deutsch Splošne informacije o artiklu: Ta artikel je na voljo samo za osebni prevzem. V primeru želje po transportu ali pošiljanju artikla nastanejo dodatni stroški, ki jih je mogoče po potrebi preveriti glede na dostavno lokacijo ali obseg dobave.

Stanje: zelo dobro (rabljeno), Collet chuck holder Collet chuck SK 40 Kedpelwqc Eofx Af Tjdg DIN 69871 Drawbar thread M 16 Collet type OZ-467 E Length 140 mm 10 pieces with set: 150 euros Individual sale: 15 euros each

Stanje: zelo dobro (rabljeno), Naprodaj profesionalni stružno-dokončni nosilec z vpenjalom SK40, idealen za planiranje, dodelavo in grobo obdelavo čelnih ter ravnih površin. Konstrukcija iz kakovostnega orodnega jekla zagotavlja stabilnost, togost in visoko natančnost vpenjanja. 📌 Tehnični podatki: . Tip: stružno-dokončni nosilec z izmenljivo rezalno ploščico . Vpenjanje: SK40 DIN 69871 B . Dimenzije: SK40 × 40 × 40 . Premer glave: Ø40 mm . Skupna dolžina: približno 60 mm . Stanje: rabljen, tehnično zelo dober – popolnoma delujoč ✅ Prednosti: . Visoka natančnost obdelave in togost vpenjanja . Možnost dela z izmenljivimi rezalnimi ploščicami . Primeren za planiranje, dodelavo in grobo obdelavo . Kompatibilen s frezalnimi stroji in obdelovalnimi centri s pritrditvijo SK40 Kedpfoxizb Esx Af Tedg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 13.209 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, širina odprtine za polnjenje: 1.050 mm, dolžina polnilne odprtine: 1.250 mm, širina bale: 1.100 mm, višina bale: 700 mm, teža bale: 500 kg, kapaciteta rezervoarja za olje: 400 l, leto zadnje generalne obnove: 2025, volumenski pretok: 108 m³/h, Technical Data – Baler: Manufacturer (according to nameplate): BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Model: HC 50 (equivalent to Presto HPK 50) Year of manufacture: 2007 Operating hours: 13,209 hours (status: March) Number of bales pressed: 23,379 pcs Pressing force: 50 t Specific press force: 650 kN/m² Feed chute dimensions: 1250 x 1050 mm (L x W) Filling volume: 0.96 m³ Theoretical cycle time: 32 seconds Theoretical throughput: 108 m³/hour Bale dimensions: 1100 x 700 mm (W x H), length variable Drive power: 15 kW Total current consumption: 50 A Tying: 4-fold vertical, fully automatic Throughput rates (by bulk density): - 30 kg/m³: approx. 3.1 t/hour - 60 kg/m³: approx. 4.5 t/hour - 100 kg/m³: approx. 7.2 t/hour Bale weights (with bale length 1.2 m): up to 500 kg, material-dependent Hydraulic oil tank capacity: 400 L PLC: Siemens S7-200 Effective transport dimensions (excluding baler): 6780 x 1800 x 2100 mm (L x W x H) Transport weight (baler): 8.5 t Kodpfx Afsw U Dt Ns Tedg Condition of the Baler: The baler was in operational use within a production environment, used exclusively for compacting cardboard, and serviced regularly. With only 13,209 operating hours, the machine has low mileage for its type. The baler has been partially overhauled and subsequently tested in our workshop. The following overhaul work was carried out: - Machine cleaned - Bale retaining claws freed and lubricated - Light barrier replaced - Twisting unit completely dismantled, all bearings and plastic sliding blocks replaced, lubricated, chain tension adjusted - Knife and counter-knife removed, sharpened, reinstalled - Knife gap newly adjusted - General maintenance and lubrication performed Scope of delivery: - 1 baler incl. wire reel boxes, without wire - 1 set of machine documentation Remarks: The complete documentation (operating instructions, CE declaration, electrical/hydraulic schematic) is available. Viewing possible by appointment. We accept no liability for the technical information or for possible errors.