Iztiskanje Vijaki nakup rabljenega (143)

Stanje: rabljeno, Details on request Chjdpfxjb Elzys Aa Rjc

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Discharge pressure / bar Flow rate / l Total power requirement / kW Atlas Copco Screw Compressor GA 22 VSD FF Operating hours: 6,235 hours Technical Data Power: 22 kW / 30 HP Max. pressure: up to 13 bar Volume flow (at 13 bar): 12.75–53.63 l/s (0.77–3.22 m³/min) Power requirement (max): up to approx. 29.6 kW incl. dryer Speed range: 1,300–4,217 rpm Sound pressure level: approx. 68 dB(A) Weight: approx. 516 kg Dimensions: 1,330 × 870 × 1,725 mm Refrigeration dryer: Integrated, pressure dew point ~ 3 °C Oil filling capacity: 19 l Control & Comfort: Elektronikon Touch & remote monitoring Next maintenance due: 09/2025 Technically flawless, immediately ready for operation Well-maintained condition Cjdpfx Aajw Eylwe Rehc Technical data taken from publicly available sources

Leto izdelave: 1981, Stanje: zelo dobro (rabljeno), UBE 800T ALUMINIJASTA EKSTRUZIJSKA STISKALNICA Leto izdelave: 1979/2008 Dimenzije valja: - Premer 132 mm x 560 mm - Premer 127 mm x 560 mm - Premer 90 mm x 555 mm Učinkovitost Chsdeggrxcspfx Aa Rsc - Stiskanje (največja tonaža) pri 210 kg/cm²: 800 M ton - Stiskanje (najmanjša tonaža) pri 210 kg/cm²: 697 M ton - Povratna globina servo strani, izhod bata pri 210 kg/cm²: 112 M ton - Povratna globina servo strani, vračanje bata pri 210 kg/cm²: 63 M ton - Tesnjenje valja pri 210 kg/cm²: 69 M ton - Odpiranje valja pri 210 kg/cm²: 94 M ton - Prebijanje pri 210 kg/cm²: 102 M ton - Premik matrice pri 210 kg/cm²: 12 M ton

Stanje: novo, Leto izdelave: 2025, Overband magnetic separator, magnetic belt, overband magnet, magnetic separator, metal detection, metal separation system Cedpfxehupkmj Aa Rshc For sale is our all-rounder – Overband Magnetic Separator Permanent Overband Magnetic Separator TYPE PEM1200 1200 x 550 x 200 mm ===== 4x lifting eye bolts for suspension Endless PU conveyor belt GB30, black matt finish Magnet dimensions: 700 x 230 x 120 mm 7 x T20 cleats, high-frequency welded High-quality triple aluminum construction Internal bearing lubrication for 10,000 operating hours Protection class: IP-55 0.37 kW three-phase geared motor by GEMOTEG 2 pcs. V4A stainless steel side protection plates Magnet core encased in soft iron to guarantee very high permeability. The base is tightly sealed with a stainless steel plate and pole shoes.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, premer vijaka: 85 mm, Complete extrusion line. Individual components can also be offered on request. The line was used for producing pipes made of PP filled with chalk and barium sulfate. Components: - 4-Component Colortronic dosing system (new control system in 2017) - Berstorff KMC 85/2 (screws renewed in 2019) - Side feeder - Complete control system for the dosing units and extruder - Single-zone oil temperature control - Maag melt pump - KraussMaffei extrusion head 40 to 160 mm (with various sets) Csdpfx Aaeu Rda Ie Rjhc - Battenfeld V250VA vacuum tank - Battenfeld K250 VA spray bath - Sica C250 - 4 haul-off unit - Rollepaal CCM 32/170-2 saw - Battenfeld tilting table

Stanje: dober (rabljeno), 740 metri vijačnih regalov Med regalnimi sistemi je kovinski vijačni regal pravi prodajni hit. Posamezni sestavni deli so za varen in stabilen oprijem trdno privijačeni skupaj. Vijak sistem odlikuje izjemno visoka stabilnost in nosilnost. Polični regal omogoča ročni dostop do vseh skladiščenih izdelkov. 45 vrst vijačnih regalov, skupaj več kot 740 metrov Proizvajalec: Mannesmann Višina: 2150 mm Globina: 600 mm Širina polja: 600 mm 23 vrst, vsaka približno 20 metrov regalov, 34 polj in 8 do 10 nivojev 12 vrst po približno 13 metrov regalov, 3 do 8 nivojev 10 vrst z dolžinami 12, 14 in 17 metrov, 3 do 8 nivojev Demontaža in odvoz v organizaciji kupca Lokacija: Bremen Dodatne artikle – nove in rabljene – najdete v naši trgovini! Codexcwpxepfx Aa Rehc Stroški mednarodne poštnine na zahtevo!

Leto izdelave: 1994, Stanje: rabljeno, Teža 2,2 t Ekstruder - premer x mm Letnica izdelave je približna navedba x +++++ Csdoltrg Sopfx Aa Rshc Prosimo, upoštevajte, da je stroj razstavljen in pripravljen za nakladanje. Zaradi tega demonstracija pod napetostjo ali izdelava videoposnetka nista možna. Naš oglas vsebuje najpomembnejše in kakovostno najboljše fotografije. Pošiljanje dodatnih slik žal ni mogoče. +++++

Stanje: dober (rabljeno), Veliki vijačni preoblikovalni stiskalnik za knjigoveštvo 50x56 cm Naprava je v popolnoma delujočem stanju in pripravljena za uporabo. Proizvajalec: Hugo Peege, Leipzig, Nemčija. Stiskalnik ima navojni blok, ki povečuje pritisk stiskanja. Pritisk: 5 t Dimenzije plošč: 500 x 560 mm Codpfx Aaewud Sgs Rshc

Leto izdelave: 2000, Stanje: rabljeno, Speed: 227 rpm, Power: 31 kW, Heating capacity: 7.8 kW, Length: 1952 mm, Width: 840 mm, Height: 1920 mm, Weight: 820 kg. Cjdpfsduyyzjx Aa Rohc

Stanje: zelo dobro (rabljeno), various lathe chucks and faceplates as shown Chodpfjfr T N Uex Aa Rjc

Stanje: skoraj kot novo (rabljeno), Edelstahl-Trichter 8 kg mit Rührwerk und Edelstahlschnecke, regelbare Geschwindigkeit, verschiedene Extrusionsscheiben für unterschiedliche Pastaformen, mobil Chedpfxod R D Tls Aa Rjc

Stanje: novo, PTG - Silačni zatiči 9 in 10 mm Ø, nakovalo 15°, vpenjalne/izravnalne plošče, PMH - nakovalo 15° in drugo, vpenjalne/izravnalne plošče 6°/4° in 8°/5°, POR 40/42U - Silačni zatič 9,5 mm Ø, nakovalo 9,5 mm Ø Chsdopfaxuspfx Aa Rjc

Stanje: rabljeno, Leto izdelave: 2001, Delivery pressure: ... bar Flow rate: ... l Serial number: B546722J Units in stock: 9 Chodpfx Aju Sbw Tsa Rsc

Stanje: rabljeno, Leto izdelave: 2009, Speed / rpm Intake pressure / bar Weight / kg Total power requirement / kW Complete compressed air system – screw compressor + refrigeration dryer (Drypoint RA 500) + 2x air receivers (each 3,000 l) Manufacturer: COMPAIR Motor power: 75 kW Model: LL80 7.5A Year of manufacture: 2009 Serial number: CD1000057200 Control system: Delcos 3100 Refrigeration dryer: Drypoint RA 500 Chjdpfxsud Iwzs Aa Rec Air receivers: 2x galvanized tanks, each 3,000 l – total volume 6,000 l Load hours: 79,495 This COMPAIR compressed air system offers a powerful and efficient solution for industrial applications with high air demand. Screw Compressor LL80 7.5A: The 75 kW compressor is robust, low-maintenance, and designed for continuous operation. Its advanced technology ensures a stable and consistent compressed air supply even under heavy loads. Ideal for production facilities, workshops, or other industrial environments. Delcos 3100 Control System: This intelligent control unit enables easy operation, monitoring, and adjustment of the compressor. It ensures optimal performance, energy efficiency, and protection of the system from damage. Refrigeration Dryer Drypoint RA 500: An integrated refrigeration dryer is essential to remove moisture from the air. This protects downstream machines and tools from corrosion and extends the service life of the entire system. Air Receivers – 2x Galvanized Tanks with 3,000 l each: The two robust, galvanized tanks provide a large storage capacity of 6,000 liters in total. This keeps the pressure stable and allows peak loads to be handled without issue. Galvanized tanks are particularly durable and corrosion-resistant. Load hours: 79,495: The compressor has been regularly serviced and is in good technical condition. The high number of operating hours is a testament to its reliability and performance in demanding production environments.

Leto izdelave: 2004, Stanje: pripravljen za uporabo (rabljen), Number of forming stages: 5, pressing force: 250 t, max. wire diameter: 23 mm, cutting length: 180 mm, ejector stroke die/punch: 140/60 mm, tool length/cutter diameter: 70/56 mm, die: 200/110 mm, punch: 227/90 mm, weight: 52 t, supplied with enclosure and documentation. Inspection is possible. Chjdpfxjnl El Ts Aa Rec

Leto izdelave: 1996, Stanje: rabljeno, WP ZSK 83 Extruder Chjdpfsb Hmrnox Aa Rjc The machine comes with two control cabinets (controls/heating and converter for ABB DC motor), an operator panel, a motor fan, and a volumetric Accurate dosing system. Three fully equipped pairs of screw shafts are included with the machine (not included in the price). The machine does not have a continuous base frame, i.e., the gearbox and process section share a single base frame, which is supported and anchored to the floor with steel supports. The motor is mounted separately on the steel platform and is connected to the Lenze pre-stage gearbox via V-belts. The machine itself is from 1979, but the control cabinets, ABB DC converter, and drive motor were all replaced after 1996, currently showing approximately 56,000 operating hours. The Lenze pre-stage gearbox was replaced in 2011, and the bearings in the DUO gearbox were also replaced in 2011. Individual process section housings in the plasticizing area were last replaced in 2011. The roll cooler visible in the photos will be relocated by us to a smaller system and is therefore not available.

Stanje: rabljeno, Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M60L/8588, Ponudbena številka: M60L/8588 Vrsta stroja: Vijčana sušilna naprava Proizvajalec: MOC DANNER Tip: Dolphin K Letnik: 2014 Kapaciteta: 250 kg Chedpfxowi Swte Aa Rsc Lokacija: Pri nas na zalogi

Stanje: zelo dobro (rabljeno), Zwick / Roell Chedpjtq Em Tefx Aa Rec Type: Mflow Application Area With increasing testing demands, the need for a higher degree of automation also rises (compared to the Cflow). The Mflow is a modular, expandable device that allows you to determine the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR). The Mflow melt flow tester, in its basic configuration, is designed for MFR testing according to Method A and can be expanded for MVR testing according to Method B. Testing in compliance with the following standards is possible: • Methods A and B according to ISO 1133 • Methods A, B, and C according to ASTM D 1238 • ASTM D 3364 • JIS K 7210 Optionally, the Mflow can be equipped with, for example, pneumatic weight lifting—with or without cleaning function—or weight selection. The Mflow can be operated either as a standalone device via a modern touch display or controlled from a PC using ZwickRoell testing software. Technical Data Test Load: 0.325 - 21.6 kg Compressed air, oiled, dry: 6 - 10 bar Dimensions Height: 510 mm Width: 360 mm Depth: 419 mm Weight approx.: 43 kg Test temperature: +50°C - +450°C Display: Capacitive touch display Temperature display resolution: < 0.1 K Number of storable parameter sets: >100 Temperature accuracy in the range 0 - 75 mm above the nozzle at 50°C - 450°C: < 0.3 K Time Measurement Error limit (Method A): ± 0.02 (with automatic cut-off device) Error limit (Method B): ± 0.01 Displacement Measurement Error limit (Method B): ±0.02 mm (ISO 1133) / ±0.4% of 6.25 mm (ASTM D 1238) Resolution: < 0.005 Multiple device operation per PC: Minimum available RAM: 1.54 GB Processor speed: 3 GHz Number of connectable Mflow flow testers per PC: 6 Power supply: 220 - 240 V, 1L/PE/N Current consumption: 2.6 A Mains frequency: 50/60 Hz Software version: V4.2 Year of manufacture: 2021 Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors reserved!) For further questions, we are happy to assist you by phone.

Stanje: rabljeno, Machine No.: 149207/45 A Pressure: 10 bar Motor power: 55 kW Volume flow: 8.2 m³/min Cedpfx Asq Awikja Rjhc Including operating manual and parts list

Stanje: rabljeno, Leto izdelave: 2014, Drive power 3 kW Operating pressure 7 bar Flow rate / l Weight 286 kg Chicago Pneumatic CPVR15 CE Screw Compressor – Year of manufacture 2014 The CPVR15 CE impresses with its robust construction, long service life, and low operating costs. Whether in craft businesses, workshops, or industrial applications – this compressor reliably delivers the compressed air you need. Drive power: 3 kW Cjdpfx Aaeh A Sfds Rehc Operating pressure: 7 bar Air delivery: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50–58 dB(A) Voltage/Frequency: 415 V / 50 Hz Applications: Workshops, craft businesses, industrial applications with medium compressed air requirements Scope of delivery: 1x Compressor - Chicago Pneumatic CPVR15 CE 1x Refrigeration dryer - OMI ESD 108 - 0.70 kW 1x Beko Öwamat 2 - Oil-water separator Technical data taken from publicly available sources.

Stanje: rabljeno, Direction of rotation: left-right Cjdpfxjwu Umnj Aa Rshc Capacity: approx. 5,000 bottles/hour with cap magazine Capper heads Mca 28 30x60 31.5 Format sets: 0.25 0.375 0.5 0.75 1.0 liters

Leto izdelave: 1999, Stanje: rabljeno, Used Entex Extruder PL-WE150 complete with control cabinet, previously used for powder coatings, in good condition. We can also offer you an Entex PL WE 70! Cjdpfxjbqt Are Aa Rehc

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 7600 x 1400 x 1800 mm Weight: 2950 kg Total power requirement: 9.15 kW Extrusion Press MHB-1560 AUTOMATIC - Automatic loading via conveyor belt - Maximum pressing length: 6000 mm - Maximum workpiece width: 150 mm - Maximum workpiece height: 80 mm Cjdpfx Asvz Hu Eoa Rohc - Maximum working pressure: 7,500 kg - Hydraulic pump motor: 4.0 kW - Feed motor: 0.75 + 1.1 kW - Cut-off saw motor: 2.2 kW - Voltage: 50 Hz, 400 V - Total power: 8.05 kW - Saw speed: 2,800 rpm - Saw blade Ø 350 mm, bore 30 mm - Feed speed: 30-60 m/min - Compressed air requirement: 8 bar - Dimensions: L=7600, W=1400, H=1800 mm - Weight: 2950 kg

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 9.743 h, Komplette Rohr-Extrusionslinie für Doppelwandige Wellrohre – 150 mm bis 350 mm Materialtrockner und -förderer – M+H Equipment, Deutschland Duo-Extruderkombination – Battenfeld 90/75 – Typ PEX-1-75-30B, Deutschland Spezial-Spritzkopf – DWP 270 – UC500 Von 90 mm Innendurchmesser bis 270 mm Außendurchmesser Spezial-Spritzkopf – DWP 630 – UC500 Von 160 mm Innendurchmesser bis 500 mm Außendurchmesser Unicor, Deutschland Korrugator – UC 500/40, hergestellt in Deutschland Extrusionskopf und Satz Formblöcke – 1 Satz für DWC-Rohre mit 150 mm, 200 mm, 250 mm, 300 mm und 350 mm Innendurchmesser, Unicor, Deutschland Kühlsprühbad – UCSB 500, Maschinennummer: Unicor, Deutschland Chodpfjvztb Sjx Aa Rjc Planetssäge – SICA, Modell – TRK/D/SY 10-500 Rohr-Ablageeinheit – 500

Stanje: rabljeno, Discharge pressure / bar Flow rate / l Air delivery / m³/h For sale is a high-performance ALUP Solo 18 screw compressor with a 18.5 kW motor, ideal for industrial applications. The compressor comes complete with a premium DRYPOINT RA refrigeration dryer by Kaeser – ensuring reliable and efficient compressed air drying without moisture problems. The ALUP Solo 18 is a compact, oil-injected screw compressor suitable for medium to large businesses. It stands out due to its energy efficiency, low noise level, and high reliability. Technical data: Motor power: 18.5 kW Max. operating pressure: 13 bar Free air delivery: up to 200 m³/h Quiet and energy-efficient Including DRYPOINT RA refrigeration dryer for dry, clean compressed air Chedpswz Ry Dsfx Aa Roc Including compressed air receiver for pressure stabilization and condensate management Perfectly suited for demanding industrial applications Technical data taken from publicly available sources.