Kovanje Zrak Kladivo nakup rabljenega (4.205)

Stanje: rabljeno, Pneumatic demolition hammer - Operating pressure: 7 bar - Quantity: 1 demolition hammer available - Price: per unit - Dimensions: 640/365/H125 mm - Weight: 22 kg Gsdpfxocm D A Io Ab Touk

Stanje: novo, Leto izdelave: 2025, Furnace output: 49 kW Working output: 45 kW New device, original packaging: Yes Warm air blower, flue gas blower, electronic controller with digital display: included Fresh air filter, recirculation intake filter: large-area intake filter without performance loss / included Warm air distribution ducts: 2 x 200 mm with plug-in, freely rotating 90° elbows Flue diameter: 180 mm Furnace chamber length: 660 mm Guodpfxopn Nyze Ab Tjk Furnace chamber width: 480 mm Furnace chamber height: 600 mm Air delivery: 3,500 m³/h Intake air filter: Yes, large-area filter without performance loss Power consumption: 550 W Designed for room volume: 1,000 m³ Weight: 310 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HFT.130, hladilna zmogljivost: 139 kW (188,99 KM), vrsta vhodnega toka: trifazni, vrsta hlajenja: voda, okoljska temperatura (maks.): 40 °C, temperatura okolja (min.): −10 °C, vhodna napetost: 400 V, skupna širina: 1.096 mm, skupna dolžina: 3.355 mm, skupna višina: 2.205 mm, ogrevalna zmogljivost: 139 kW (188,99 KM), Hitema International HFT.130 OBRATNA TOPLOTNA ČRPALKA ZRAK-VODA Hladilna zmogljivost: 139kW Ogrevalna zmogljivost: 139kW Toplotne črpalke z dvema scroll kompresorjema, hladilno sredstvo R410A, spajkani ploščni izparilnik/kondenzator, kondenzatorsko/izparilno tuljavo z bakrenimi cevmi in aluminijastimi rebri, aksialni AC ventilatorji. Zaščita IP54, hladilniki primerni za zunanjo namestitev Guedpox E S Tyefx Ab Tek Tehnični podatkovni list na zahtevo

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating large usable areas, such as production halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up phases and heat up the workshop, joiner’s or carpenter’s facility, and other production areas within a very short time. Solid wood and its by-products, such as solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes, are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the requirements for emission values in accordance with the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V Gedpfjvz Hq Tox Ab Teuk - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Space requirements: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet connectors: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlet are located at the rear, lower part of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: rabljeno, Leto izdelave: 2021, Maks. tlak: 16 bar Guodpfjxz Al Nsx Ab Tok Moč: 0,81 kW

Stanje: rabljeno, Rezervoar za stisnjen zrak, tlačna posoda KAESER Tovarniška št.: 481127K Leto izdelave: 2001 Prostornina rezervoarja: 1000 litrov Obratovalni tlak: 11 barov - Tlačna posoda vroče cinkana - 3 priključne spojke z navojem 2" - 2 priključni spojki z navojem 1 1/2" - 3 priključne spojke z navojem 1/2" - 2 majhni čistilni odprtini - 3 krogelni ventili Gjdpsxpqzuofx Ab Teuk - 1 varnostni ventil - Manometer za tlak - 2 žerjavna ušesa na vrhu rezervoarja Premer rezervoarja: cca 800 mm Skupna višina: 2300 mm z nosilcem (brez priključkov) Teža: 230 kg Dobro ohranjen

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3018/13, kapaciteta rezervoarja: 200 l, skupna dolžina: 1.000 mm, skupna širina: 500 mm, skupna višina: 1.470 mm, skupna masa: 93 kg, obratovalna temperatura: 55 °C, tlak (maks.): 10 letvica, Oprema: CE označba, Aircraft tehnologija stisnjenega zraka, baterija posod KB 2x100/10, zelo dobro ohranjena, letnik 2013 Naprava je tipsko preizkušena, zato ni potrebna TÜV odobritev Guedpfx Aex Ext Hsb Tek Priključni ventili in manometer so vključeni

Stanje: rabljeno, Leto izdelave: 1999, Bear weight 26 kg Bear stroke 200 mm Type KO Machine No.: 596 Blow rate 220 strokes/min Gsdpfxoqwpxbs Ab Tjuk Pneumatic hammer

Stanje: rabljeno, Leto izdelave: 1957, Bear weight 200 kg Ram stroke 525 mm Blow rate 150 /min Blow energy 420 kJ Distance saddle bottom / lower edge of ram guide 435 mm Throat depth 425 mm Steel forging - rectangular up to 110 mm Gedpfx Aevzxpbsb Tsuk Steel forging - diameter up to 125 mm Drive power 22.0 kW Hammer weight 3.9 t Anvil block weight 3.0 t Total weight 6.9 t Space requirements (W x D x H) 1.1 x 2.3 x 2.4 m Forging hammer as is, without commissioning

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and trade businesses. They have been developed for heating larger spaces, such as workshops and production halls in craft and industrial facilities. These hot air systems require no long heat-up phases and are capable of quickly warming up carpentry or joinery workshops and other production areas. Gujdpfxevz Hq Hj Ab Tjk Fuel types include solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages stipulated by the 1st German Federal Immission Control Ordinance (1. BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output: 43,000 kcal - Fuel consumption: 15 kg/h - Air throughput: 4,900 m³/h - Firebox depth: 650 mm - Loading door: 370 x 350 mm - Hot air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable surface: approx. 220 m² - Footprint: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney draft: 13 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet. The two air outlet nozzles for the hot air are located at the lower rear of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, with compressed air cleaning and frequency converter Startup via frequency converter, pressure transmitter for demand-driven regulation Pre-separator integrated, Gsdpfoxpximjx Ab Teuk extinguishing system integrated Efficient and economical: Large-volume compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. Simple yet highly effective: OPTI JET cleaning and bag filter with snap ring fastening. Exceptionally efficient: Energy-efficient drive systems according to IE3. Safe in emergencies: Maintenance-friendly automatic extinguishing system. Exceptionally quiet: Sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic operation. Countless options available, from machine recognition and slide gate control to frequency-controlled operation, to name just a few examples. Nothing is left to chance: Collection container with inspection window. Practical down to the details: Container locking with ergonomically shaped tension lever. Easily upgradable: Retrofitting for discharge via briquetting press or rotary valve possible. - high extraction capacity - compact footprint - 100% air recirculation with no temperature loss - (residual dust < 0.1 mg/m³) - integrated pre-separator and expandable control system - optimum filter cleaning - minimal noise level - optional: patented level monitoring - maintenance-friendly, certified automatic fire extinguishing system - dust barrier for dust-free container change - (optional: container safety interlock) - freely configurable and expandable module exchange ----- Technical Data ----- Extraction nozzle Ø: 350 mm, Nominal air flow: 6,927 m³/h, Max. air flow: 8,500 m³/h, Max. negative pressure: 2,543 Pa, Filter area: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pcs, Motor 400 V: 11.0 kW, Dimensions (LxWxH): 3,340 x 1,058 x 2,351 mm, Sound pressure level: 71 dB(A), Weight: 999 kg, according to: GS - HO - 07

Stanje: rabljeno, Leto izdelave: 2013, Popolnoma delujoč. Možno ga je neposredno vključiti v ogrevalni krog. Gjdpfoxxlzhox Ab Teuk

Stanje: rabljeno, Pnevmatska enostebrna stiskalnica RECTUS - FRIEDMANN & MAIER tip K3000 / 50 / 6A Pnevmatska stiskalnica Tov. št.: 3437 Leto izdelave: ca. 1990 Tlačna sila: 3,0 t pri 6 bar Tlačna sila: 2,6 t pri 5 bar Tlačna sila: 2,2 t pri 4 bar Gsdpfxow A Srws Ab Tsuk Tlačna sila: 1,6 t pri 3 bar Tlačna sila: 1,0 t pri 2 bar Razpon: 150 mm Tehnični hod: 6 mm Predhod: 50 mm Skupni hod: 56 mm Površina bata: Ø 100 mm Vpenjalo za orodje: Ø 12 mm Vgradna višina: max. 180 mm Namizna površina: 200 x 200 mm Potreba po stisnjenem zraku: max. 6 bar - Pnevmatski močnik z mehanskim ojačevalcem sile (klinasto vzvodno načelo) - Pritisni valj nastavljiv po višini preko navojne vretena na stojalu (50 mm) - Brez pnevmatskega krmiljenja - Dušilni ventil za nastavitev hitrosti hoda Dimenzije (d x š x v): 440 x 230 x 750 mm Teža: 127 kg Dobro stanje

Stanje: dober (rabljeno), skupna višina: 3.200 mm, skupna dolžina: 3.500 mm, skupna širina: 1.500 mm, skupna masa: 10.000 kg, - Teža bata: 300 kg Gedjwin Stjpfx Ab Tjuk - Frekvenca udarcev: približno 120 udarcev na minuto

Stanje: dober (rabljeno), Leto izdelave: 1995, številka stroja/vozila: 250 95, Ponudba 25443 Tehnični podatki: - Masa kladiva: 40 kg - Regulacija udarca Gusdpex A U Ufjfx Ab Tjk - Višina hoda brezstopenjsko nastavljiva: 200 mm - Število udarcev: pribl. 220 1/min - Izravnava: 280 mm - Višina nakovala: pribl. 560 mm - Teža nakovala: 250 kg - Pogon: 380 V / 4 kW - Potreben prostor: pribl. Š 850 x V 1100 x G 1350 mm - Teža: pribl. 850 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industry and trade businesses. They are designed for heating large usable areas such as factory halls and workspaces in craft and industrial companies. These hot air systems require no lengthy warm-up phases and can heat production facilities such as carpentry or joinery workshops as well as other workplaces extremely quickly. The fuel can be solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety standards of Directive 89/392/CE. All models of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission limits required by the 1st BImSchV. - Automatic operation and continuous air mode - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2-0.3 mbar - Draft requirement at nominal load: 0.18 mbar - Heatable volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Required space: Width 1700 mm, Depth 2000 mm, Height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connector): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85-90% - Flue draft: 11.5 Pa Gjdpfx Abjvz Hqyo Teuk - Flue gas temperature: 289 °C - Hot air outlet sockets: 2 x Ø 450 mm - For more technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlets are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per connector is permitted for air distribution. Longer pipe runs are possible on request and with the manufacturer’s approval. Please contact us for further information.

Stanje: rabljeno, Sila: 1600 ton Hod bata: 300 mm Nastavitev razdalje med mizo in batom: 10 mm Število hodov na minuto: 75 hpm Dolžina droga: 920 mm Zaprtje višina (min. razdalja miza–bat): 660 mm Dimenzije mize: 940 × 1200 mm Gujdpfjx Ek Ntsx Ab Tek Višina mize nad tlemi: 450 mm Dimenzije bata: 860 × 910 mm Stransko okno (v/š): 560x600 mm Glavni motor: 110 kW Dimenzije: 5060x3940x5125 mm Teža stiskalnice: 120 ton

Leto izdelave: 2015, Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: BES041875, Zaradi visoke frekvence udarcev in zmanjšane energije udarca je naprava predvsem / idealna za uporabo pri delih nabijanja in vzdrževanja železniških tirov. Za zabijanje železniških žebljev v lesene pragove, vbijanje cevi, kolov, sond, lomljenje betona. Enostaven transport, kratek čas priprave, nizke emisije, nizka raven hrupa. HAPS (Sistem zaščite rok in rokavov). Gusdpjx Eb Udefx Ab Tsk

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, IE3 motor as standard Gedpedqzhhefx Ab Tjuk Maximum air volume flow up to 10,000 m³/h at the fan Approx. 73 m² filter surface Pre-separator as standard 71 dB(A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content 0.1 mg/m³ reliably maintained (wood dust) Models with pattern-tested rotary valve (FSA) Tested backdraft damper Integrated automatic extinguishing system 350+ P Suction nozzle: 355 mm Rated motor power: 15.0 kW / 3Ph Voltage: 400 V / 50Hz Max. air volume flow: 10,000 m³/h Rated air volume flow*: 7,127 m³/h Negative pressure at Vnenn.: 3,347 Pa Filter surface: 73 m² Chip collection volume (net / gross): 3 x 165 L / 3 x 241 L Sound pressure level: 72 dB(A) Dimensions (L/W/H) in mm: 3,112 x 1,058 x 2,361 Weight: 1,074 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 600 x 800 x 1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and trade businesses. These units are designed for heating larger utility areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems do not require long heat-up phases and can heat the workshop, joinery, carpentry hall, or other production sites in a very short time. Solid wood and its by-products can be used as fuel, including solid wood panel remnants, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations of Directive 89/392 EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st German Federal Immission Control Ordinance (BImSchV) regarding required emission limits. Gusdovz Hqtepfx Ab Tjk - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox vacuum: 0.2–0.3 mbar - Required flue draft at rated output: 0.18 mbar - Heatable volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90 % - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached data sheet The two pipe connections for the hot air outlets are located at the rear of the furnace in the lower section. A maximum of 20 meters of ducting per pipe connection is permitted for air distribution.

Stanje: dober (rabljeno), Leto izdelave: 2007, Al-Ko clean air dust extractor, used Inlet nozzle: 160 mm Rated motor output: 2.2 kW / 3-phase Gusdpfx Asw Aptlob Tsk Voltage: 400 V / 50 Hz Nominal air flow rate: 1850 m³/h Negative pressure: 2120 Pa Filter area: 9 m² Filter material: Category "C" - BIA certificate - electrically conductive - washable - H3 < 0.1 mg/m³ Filter cleaning: compressed air Max. sound pressure level: 69.4 dB Chip collection volume: 280 liters Dimensions (L/W/H) in mm: 1600 x 830 x 1850 Weight: 288 kg Location: ex-stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30 The MARTINA warm air furnaces provide an ideal solution for energy utilization in wood-processing industrial and craft businesses. These units are designed for heating large working areas such as workshops and workspaces in trade and industrial settings. These warm air systems require no lengthy heat-up phases and heat up joinery or carpentry shops as well as other production facilities in a very short time. Fuel materials include solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety requirements set out in EC Directive 89/392. All warm air furnaces in the MARTINA series—15, 30, 55, 85, 120, 180, 240, and 350—meet both emission limit stages as required by the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 29.8 kW - Thermal output: 25,700 kcal - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm Guodpfx Aevz Hqmjb Tek - Chimney diameter (guideline): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connectors: 2 x Ø 200 mm - For further data, please refer to the attached data sheet The two outlet connectors for the warm air are located at the lower rear of the furnace. A maximum pipe length of 20 meters per outlet is permissible for air distribution.

Stanje: novo, Leto izdelave: 2025, Chip Extraction Unit ASA 2803 Mobile, with 180° rotatable extraction unit For chips from milling, planing, and sawing (not suitable for dust) 180° rotatable extraction unit allows for extraction guidance from below or above Robust metal impeller Supplied as standard with high-quality undercarriage for improved stability and easy maneuvering Quick-release fasteners for filter and chip bags Fine filter bag, double-layered Godpfx Aohk S Sdeb Tjuk Dimensions and Weights Chip collection volume: 2 x 120 l Outer diameter of inlet extraction nozzle: 203 mm Outer diameter of outlet extraction nozzle: 1 x 100, 2 x 120 mm Length approx.: 1500 mm Width/Depth approx.: 500 mm Height approx.: 2100 mm Weight approx.: 53 kg Electrical Data No-load speed: 2950 RPM Input power: 2.2 kW Connection voltage: 400 V Network frequency: 50 Hz Filter Filter surface: 2 x 1.92 m² Noise Emission Maximum sound pressure level: 87.5 dB(A) Airflow Nominal airflow: 2800 m³/h Maximum negative pressure: 1900 Pa Scope of delivery: Two filter bags, two chip bags Location: In stock, 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 1300x1700x2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed to heat large usable areas such as workshops and working spaces in both craft and industrial settings. These hot air systems require no lengthy heat-up phases and are able to quickly warm carpentry or joinery halls and other production facilities. Solid wood and its by-products, such as remnants of solid wood panels, chips, sawdust, pellets, or briquettes, can be used as fuels. Gjdjvz Hqgjpfx Ab Tsuk The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations from Directive 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the required emission values under the 1st BImSchV. - Automatic operation and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 Kcal - Fuel consumption: 50 kg/h - Air delivery: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space requirement: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Chimney diameter (reference): 300 mm - Efficiency: 85-90% - Chimney pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For further technical data, please refer to the attached data sheet. The 2 outlet nozzles for the heated air are located at the rear, in the lower part of the furnace. A maximum length of 20 meters of duct is permitted per outlet for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft enterprises. Designed for heating larger operational areas such as factory halls and workshops in both craft and industrial sectors, these hot air systems require no long heat-up phases and can quickly warm up carpentry or joinery shops and other production facilities. Solid wood and its by-products, e.g., solid wood panel offcuts, chips, sawdust, pellets, or briquettes, serve as fuel material. The MARTINA hot air ovens comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the equipment safety directive 89/392 CE. All hot air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air flow rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm Gusdpsvz Hhxefx Ab Tjk - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft required at rated output: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirement: width 800 mm, depth 1170 mm, height 2300 mm - Weight: 650 kg - Flue pipe diameter (spigot): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85–90 % - Chimney draft pressure: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet nozzles: 2 x Ø 220 mm - For further specifications, please refer to the attached data sheet The two pipe nozzles for hot air output are located at the lower rear side of the furnace. A maximum of 20 meters of ducting per nozzle is allowed for air distribution.