Zrak Ekstrakcijo nakup rabljenega (2.994)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, IE3 motor as standard Maximum air volume flow up to 10,000 m³/h at the fan Approx. 73 m² filter surface Pre-separator as standard 71 dB(A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content 0.1 mg/m³ reliably maintained (wood dust) Models with pattern-tested rotary valve (FSA) Tested backdraft damper Integrated automatic extinguishing system 350+ P Suction nozzle: 355 mm Rated motor power: 15.0 kW / 3Ph Voltage: 400 V / 50Hz Max. air volume flow: 10,000 m³/h Rated air volume flow*: 7,127 m³/h Gcjdedqzhhopfx Ab Tea Negative pressure at Vnenn.: 3,347 Pa Filter surface: 73 m² Chip collection volume (net / gross): 3 x 165 L / 3 x 241 L Sound pressure level: 72 dB(A) Dimensions (L/W/H) in mm: 3,112 x 1,058 x 2,361 Weight: 1,074 kg

Stanje: novo, Leto izdelave: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Suction inlet: 300 mm Rated motor power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Godpjh D If Hsfx Ab Tsca Maximum airflow: 6,000 m³/h Rated airflow: 5,089 m³/h Negative pressure: 2,587 Pa Filter surface area: 30 m² Dimensions (L x W x H) in mm: 3,000 x 1,361 x 2,817 Briquetting output: 30 - 50 kg/h Briquette diameter: 50 mm Weight: 1,570 kg This machine is brand new in our stock – IMMEDIATELY AVAILABLE – Subject to prior sale Location: 54634 Bitburg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, FELDER Model RL 140 Felder clean air extraction units make a significant contribution to your health. The residual dust content in the ambient air is below 0.1 mg/m³! This is ensured by filter elements (BIA category G) and the fan impeller located on the clean air side. Mobile clean air extraction unit, dust-tested/GS (BG test certificate) Technical data: Extraction connection diameter: 140 mm Extraction possible on right or left side Manual chip discharge 10 m² filter area Max. capacity 2,500 m³/h Minimum footprint: 1,040 x 898 x 1,940 mm (L x W x H) Manual cleaning Version with antistatic filter Power [kW] 3, 3 x 400 V Nominal air volume at 20 m/s [m³/h] 1,108 Chip/dust collection bin capacity [L] 200 Air volume flow [m³/h] 2,500 Max. vacuum [Pa] 2,200 Note on used machines: • Technical information and prior sale subject to change. • Quoted prices are ex location, loaded free of charge! • The machines have been cleaned and function tested. • All machines are purchased as inspected, with no guarantee or warranty whatsoever. Buyers are invited to inspect the machines at their location. • Special agreements are only valid in written form. Gcjdpfex Aglpjx Ab Tea (Enquiries will only be answered if you provide your address and telephone number!)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HFT.130, hladilna zmogljivost: 139 kW (188,99 KM), vrsta vhodnega toka: trifazni, vrsta hlajenja: voda, okoljska temperatura (maks.): 40 °C, temperatura okolja (min.): −10 °C, vhodna napetost: 400 V, skupna širina: 1.096 mm, skupna dolžina: 3.355 mm, skupna višina: 2.205 mm, ogrevalna zmogljivost: 139 kW (188,99 KM), Hitema International HFT.130 OBRATNA TOPLOTNA ČRPALKA ZRAK-VODA Hladilna zmogljivost: 139kW Ogrevalna zmogljivost: 139kW Toplotne črpalke z dvema scroll kompresorjema, hladilno sredstvo R410A, spajkani ploščni izparilnik/kondenzator, kondenzatorsko/izparilno tuljavo z bakrenimi cevmi in aluminijastimi rebri, aksialni AC ventilatorji. Zaščita IP54, hladilniki primerni za zunanjo namestitev Tehnični podatkovni list na zahtevo Godpfx Abjx E S Tyj Tjca

Stanje: novo, Leto izdelave: 2025, Furnace output: 49 kW Working output: 45 kW New device, original packaging: Yes Gcedpfx Abspn Nyze Toa Warm air blower, flue gas blower, electronic controller with digital display: included Fresh air filter, recirculation intake filter: large-area intake filter without performance loss / included Warm air distribution ducts: 2 x 200 mm with plug-in, freely rotating 90° elbows Flue diameter: 180 mm Furnace chamber length: 660 mm Furnace chamber width: 480 mm Furnace chamber height: 600 mm Air delivery: 3,500 m³/h Intake air filter: Yes, large-area filter without performance loss Power consumption: 550 W Designed for room volume: 1,000 m³ Weight: 310 kg

Stanje: rabljeno, 1 kos odsesovalne naprave HOLZMANN ABS 3000SE, 1500 W, 400 V, 50 Hz, Znamka: HOLZMANN, Tip: ABS 3000SE, Teža: 45 kg, Barva: siva/rdeča, Mere: 100x55x107 cm, Lokacija uporabe: proizvodna hala, Stanje: rabljeno Godpfxjx A A Hio Ab Toca

Stanje: zelo dobro (rabljeno), - Gesamte Luftfördermenge: 70.000 m³/h - 610 m² (Gesamtfilterflächen) - 540 Filtertaschen (je Ø 120 mm x Länge 3.000 mm) - Durchschnittliche Luftgeschwindigkeit im Filter: 1,86 m/s Godpfx Aeh Icn Ssb Tjca - Elektroventilator Typ TRMV 1401, Durchmesser 1.000 mm, Leistung 132 kW (176 PS)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, Predstavitveni stroj Na voljo je naš čistozračni odsesovalni aparat Felder RL-200 iz našega razstavnega prostora z največjim volumskim pretokom 2300 m³/h. Odvodni aparat je v kot novem stanju ter ga je pregledalo in obnovilo naše strokovno osebje. Tehnični podatki: - H3 testiranje prahu - Priključek za odsesavanje Ø 200 mm - Samodejno stresanje ostružkov - Jeklena ventilatorska lopatica - Maks. volumenski pretok 2300 m³/h - vključno s stiskalnico za brikete FBP 60 (50–70 kg/h) - Leto izdelave 2016 Gcsdpfxexxkr Sj Ab Tja Naprava za čist zrak se nahaja v A-5431 Kuchl in si jo lahko ogledate kadarkoli v času naših uradnih ur. Pridržujemo si pravico do predhodne prodaje! Sorodni izrazi: odsesavanje, odsesovalni aparat, čistozračni aparat, čist zrak, RL, briketirna stiskalnica, briketiranje Referenca: R-A0117

Stanje: novo, Leto izdelave: 2025, Mere (dolžina/širina/višina): 3460x1000x2400 mm Število filtrskih vrečk: 73 kos Število vreč za ostružke: 4 kosi Teža: 410 kg Premer pištolnega nastavka: 355 mm Premer nosilca vreče: 520 mm WINTER ODSAVALNA NAPRAVA CLEANER ECO-10000 - Sesalna zmogljivost: 10.000 m³/h - Moč motorja: 11,0 kW Gedpfew Nblrox Ab Tsca - Število vrtljajev: 3000 obr/min - Napetost: 400 V, 50 Hz - Hitrost sesanja: 32 m/s - Premer sesalnega priključka: 355 mm - Filter material: antistatični poliester, 2 mikrona - Preostala vsebnost prahu: 0,2 mg/m³ - 73 cevnih filtrov Ø 160 x 1100 mm - 4 vreče za ostružke Ø 520 x 900 mm - Dimenzije: D=3460 mm, Š=1000 mm, V=2400 mm - Teža: 410 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, Naprodaj je Felder AF-22 odsesovalna naprava z maksimalnim pretokom zraka 3100 m³/h. Gjdpfoxxiy Ujx Ab Toca Odsesovalna naprava je v zelo dobrem stanju, pregledana in servisirana s strani našega strokovnega osebja. Tehnični podatki: - Odvodna zmogljivost 3100 m³/h - maks. podtlak 2510 Pa - Priključek za odsesavanje Ø 160 mm - Prostornina za ostružke 2x200 litrov - vklj. s filtrsko kartušo za prah + stresalno napravo - Letnik 2024 - Moč motorja 3 kW Naprava se nahaja v A-5431 Kuchl in je možen ogled v času naših delovnih ur. Vmesna prodaja pridržana! Sorodni pojmi: Odsesovalna naprava, odsesavanje, filter, kartušni filter Referenca: R-E28WO

Stanje: novo, Leto izdelave: 2025, Mere (dolžina/širina/višina) 4100x1200x4920 mm Gjdpfx Abowugpzs Teca Filter površina 53,08 m² Število filtrskih vrečk 96 kos Premer vtočnega priključka 400 mm Teža 1230 kg WINTER ODSESAVALNA NAPRAVA z rotacijsko zaporno loputo tip AZR 15000 - Sesalna zmogljivost 15.000 m³/h - Moč motorja 15,0 kW - Hitrost vrtenja 3000 obratov/min - Napetost 400 V, 50 Hz - Premer sesalnega priključka 400 mm - Čiščenje filtra z 2 vibracijskima motorjema 0,17 kW vključno z nadzorno enoto - Filter material poliester, 2 mikrona - Ostanki prahu 0,2 mg/m³ - 96 cevnih filtrov Ø 160 x 1100 mm - Filter površina 53,08 m² - Motor rotacijske zaporne lopute 0,55 kW s senzorjem nivoja polnjenja - Dimenzije D=4100 mm, Š=1200 mm, V=4920 mm - Teža 1230 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating large usable areas, such as production halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up phases and heat up the workshop, joiner’s or carpenter’s facility, and other production areas within a very short time. Solid wood and its by-products, such as solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes, are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the requirements for emission values in accordance with the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Space requirements: width 800 mm, depth 1170 mm, height 2200 mm Gcsdpovz Hq Tefx Ab Tea - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet connectors: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlet are located at the rear, lower part of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and trade businesses. They have been developed for heating larger spaces, such as workshops and production halls in craft and industrial facilities. These hot air systems require no long heat-up phases and are capable of quickly warming up carpentry or joinery workshops and other production areas. Fuel types include solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages stipulated by the 1st German Federal Immission Control Ordinance (1. BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output: 43,000 kcal - Fuel consumption: 15 kg/h - Air throughput: 4,900 m³/h - Firebox depth: 650 mm Gcedpevz Hq Hjfx Ab Tsa - Loading door: 370 x 350 mm - Hot air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable surface: approx. 220 m² - Footprint: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney draft: 13 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet. The two air outlet nozzles for the hot air are located at the lower rear of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industry and trade businesses. They are designed for heating large usable areas such as factory halls and workspaces in craft and industrial companies. These hot air systems require no lengthy warm-up phases and can heat production facilities such as carpentry or joinery workshops as well as other workplaces extremely quickly. The fuel can be solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety standards of Directive 89/392/CE. All models of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission limits required by the 1st BImSchV. - Automatic operation and continuous air mode - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2-0.3 mbar - Draft requirement at nominal load: 0.18 mbar - Heatable volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² Gcedpfx Asvz Hqysb Tsa - Required space: Width 1700 mm, Depth 2000 mm, Height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connector): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85-90% - Flue draft: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet sockets: 2 x Ø 450 mm - For more technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlets are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per connector is permitted for air distribution. Longer pipe runs are possible on request and with the manufacturer’s approval. Please contact us for further information.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 600 x 800 x 1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and trade businesses. These units are designed for heating larger utility areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems do not require long heat-up phases and can heat the workshop, joinery, carpentry hall, or other production sites in a very short time. Solid wood and its by-products can be used as fuel, including solid wood panel remnants, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations of Directive 89/392 EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st German Federal Immission Control Ordinance (BImSchV) regarding required emission limits. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox vacuum: 0.2–0.3 mbar - Required flue draft at rated output: 0.18 mbar - Heatable volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm Gedpfx Absvz Hqto Toca - Efficiency: 85–90 % - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached data sheet The two pipe connections for the hot air outlets are located at the rear of the furnace in the lower section. A maximum of 20 meters of ducting per pipe connection is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30 The MARTINA warm air furnaces provide an ideal solution for energy utilization in wood-processing industrial and craft businesses. These units are designed for heating large working areas such as workshops and workspaces in trade and industrial settings. These warm air systems require no lengthy heat-up phases and heat up joinery or carpentry shops as well as other production facilities in a very short time. Fuel materials include solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety requirements set out in EC Directive 89/392. All warm air furnaces in the MARTINA series—15, 30, 55, 85, 120, 180, 240, and 350—meet both emission limit stages as required by the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 29.8 kW - Thermal output: 25,700 kcal - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Chimney diameter (guideline): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C Gsdpfx Absvz Hqmj Toca - Warm air outlet connectors: 2 x Ø 200 mm - For further data, please refer to the attached data sheet The two outlet connectors for the warm air are located at the lower rear of the furnace. A maximum pipe length of 20 meters per outlet is permissible for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 1300x1700x2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed to heat large usable areas such as workshops and working spaces in both craft and industrial settings. These hot air systems require no lengthy heat-up phases and are able to quickly warm carpentry or joinery halls and other production facilities. Solid wood and its by-products, such as remnants of solid wood panels, chips, sawdust, pellets, or briquettes, can be used as fuels. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations from Directive 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the required emission values under the 1st BImSchV. - Automatic operation and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 Kcal - Fuel consumption: 50 kg/h - Air delivery: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space requirement: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Chimney diameter (reference): 300 mm - Efficiency: 85-90% - Chimney pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For further technical data, please refer to the attached data sheet. The 2 outlet nozzles for the heated air are located at the rear, in the lower part of the furnace. Godjvz Hqgspfx Ab Teca A maximum length of 20 meters of duct is permitted per outlet for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 700 x 1050 mm Weight: 120 kg Total power requirement: 1.2 kW Laser fume extraction unit LA-1500-IQ Suitable for filtering laser gases and dusts such as acrylic, plastic, wood, and more. Also usable for air purification in soldering, laboratories, etc. The capacity is designed for a working area of 1400 x 1000 mm. Function: The LCD display indicates airflow and air pressure. The airflow can be adjusted. A remote control for setting the airflow is included in the scope of delivery. The unit has a warning system to notify when a filter is blocked for replacement. Laser gases and dust are filtered in several stages. Two pre-filter stages remove coarse particles and simultaneously protect the subsequent fine dust filters from rapid saturation. The activated carbon filter purifies the air at the molecular level at the final stage, ensuring clean breathing air. - Fume extraction capacity: 1500 m³/h - Filtration efficiency: > 99.9% - 2 blowers, 2 x 600 W = 1200 W - Air pressure: 3800 Pa - Noise level: 60 dBA Gcjdpfsvz Hp Nex Ab Tea - Voltage: 230 V / 50 Hz - Primary filter (coarse filter): 430 x 430 x 4 mm for particles ≥5 micron - Medium filter: 430 x 430 x 300 mm for particles ≥1 micron - HEPA filter: 430 x 430 x 50 mm for particles ≥0.01 micron and smoke - Gas filter: 430 x 430 x 150 mm for odors and toxic gases - Hose connection diameter: 150 mm - Dimensions: L = 600 mm, W = 700 mm, H = 1050 mm - Weight: 120 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 670 x 770 x 1203 mm Weight: 142 kg Total power requirement: 1.2 kW Laser Extraction System LA-2000-IQ Suitable for filtering laser fumes and dust, such as acrylic, plastic, wood and more. Also suitable for air purification during soldering, in laboratories, etc. The capacity is designed for a working area of 2000 x 2000 mm. Function: The LCD display indicates the airflow and air pressure. Airflow can be adjusted. A remote control for airflow adjustment is included in the delivery. The unit features a warning system to indicate when a filter is blocked and needs to be replaced. Laser fumes and dust are filtered in multiple stages. Two pre-filter stages remove coarse particles and protect the subsequent fine dust filters from rapid saturation. The activated carbon filter purifies the air at the molecular level, ensuring clean breathable air. - Extraction capacity: 2000 m³/h - Filtration efficiency: >99.7% / 0.3 micron - 2 fans: 2 x 600 W = 1200 W - Air pressure: 4000 Pa - Noise level: 70 dBA - Voltage: 230 V / 50 Hz Gcsdpfovz Hi Aox Ab Tsa - Primary filter (coarse): 400 x 500 x 20 mm for particles ≥5 micron - Medium filter: 500 x 600 x 300 mm for particles ≥1 micron - HEPA filter: 493 x 593 x 50 mm for particles ≥0.01 micron and smoke - Gas filter: 500 x 600 x 140 mm for odours and toxic gases - Hose connection diameter: 150 mm / 200 mm - Dimensions: L=670 mm, W=770 mm, H=1203 mm - Weight: 142 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 500 x 550 x 1050 mm Weight: 80 kg Total power requirement: 1.2 kW Laser fume extraction unit LA-700-IQ Suitable for filtering laser fumes and dust such as acrylic, plastic, wood, etc.; also suitable for air purification during soldering, laboratory work, etc. The performance is designed for a working area of 1000 x 1000 mm. Function: The LCD display indicates airflow and air pressure. Airflow is adjustable. A remote control for airflow adjustment is included in the scope of delivery. The machine features a warning system that reminds you when a filter is blocked and needs to be replaced. Filtering of laser fumes and dust is carried out in multiple stages. Two pre-filter stages remove coarse particles and simultaneously protect the subsequent fine dust filters from premature saturation. The activated carbon filter cleans the air at the molecular level for purified breathing air. - Fume extraction capacity: 700 m³/h - Filtration efficiency: >99.9% Gcjdpfjvz Hipsx Ab Tja - 2 fans, 600 W - Air pressure: 3200 Pa - Noise level: =60 dBA - Voltage: 230 V / 50 Hz - Primary filter (coarse filter): 410 x 410 x 4 mm for particles ≥5 micron - Medium filter: 410 x 410 x 300 mm for particles ≥1 micron - HEPA filter: 410 x 410 x 50 mm for particles ≥0.01 micron and smoke - Gas filter: 410 x 410 x 150 mm for odor and toxic gases - Hose connection diameter: 150 mm - Dimensions: L=500 mm, W=550 mm, H=1050 mm - Weight: 80 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft enterprises. Designed for heating larger operational areas such as factory halls and workshops in both craft and industrial sectors, these hot air systems require no long heat-up phases and can quickly warm up carpentry or joinery shops and other production facilities. Solid wood and its by-products, e.g., solid wood panel offcuts, chips, sawdust, pellets, or briquettes, serve as fuel material. The MARTINA hot air ovens comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the equipment safety directive 89/392 CE. All hot air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air flow rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft required at rated output: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirement: width 800 mm, depth 1170 mm, height 2300 mm - Weight: 650 kg - Flue pipe diameter (spigot): 200 mm - Chimney diameter (recommended): 250 mm Gcedpjvz Hhxsfx Ab Toa - Efficiency: 85–90 % - Chimney draft pressure: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet nozzles: 2 x Ø 220 mm - For further specifications, please refer to the attached data sheet The two pipe nozzles for hot air output are located at the lower rear side of the furnace. A maximum of 20 meters of ducting per nozzle is allowed for air distribution.

Stanje: novo, Leto izdelave: 2025, Mere (Dolžina/Širina/Višina) 920x2100x2150 mm Gcjdpfx Asvz Erpsb Tea Teža 300 kg Skupna potrebna moč 5,5 kW Odsesovalni sistem CLEANER ECO-5000 - Odsesovalna zmogljivost 5000 m³/h - Moč motorja 5,5 kW - Hitrost vrtenja 3000 obr/min - Napetost 400 V, 50 Hz - Odsesovalna hitrost: 28 m/s - Premer sesalnega nastavka 280 mm - Filter material: iglani poliester, 5 mikronov - Preostala vsebnost prahu: 0,5 mg/m³ - 35 cevnih filtrov Ø 160 x 935 mm - 2 vreči za odpadke, vsaka Ø 520 x 900 mm - Dimenzije D=920 mm, Š=2100 mm, V=2150 mm - Teža 270 kg

Stanje: novo, Leto izdelave: 2025, Mere (dolžina/širina/višina) 750x1400x2000 mm Teža 137 kg Skupna potrebna moč 3 kW Odsesovalna naprava CLEANER ECO-3500 - Odsesovalna zmogljivost 3500 m³/h - Moč motorja 3,0 kW - Število vrtljajev 3000 obr/min - Napetost 400 V, 50 Hz - Hitrost odsesovanja: 28 m/s Gcodpfx Abevz Einj Toa - Premer sesalnega priključka 200 mm - Filter material: iglani poliester, 5 mikronov - Preostanek prahu 0,5 mg/m³ - 18 cevnih filtrov Ø 160 x 935 mm - Vreča za ostružke Ø 520 x 950 mm - Premično - Dimenzije D=750 mm, Š=1400 mm, V=2000 mm - Teža 137 kg

Stanje: novo, Leto izdelave: 2025, Mere (Dolžina/Širina/Višina) 1000x3000x2200 mm Teža 450 kg Skupna potrebna moč 11 kW Gsdpfxevz Eh De Ab Tjca Odsesavalna naprava CLEANER ECO-8500 - Odsesalna zmogljivost: 8500 m3/h - Moč motorja: 11.0 kW - Število obratov: 3000 rpm - Napetost: 400 V, 50 Hz - Hitrost odsesavanja: 32 m/s - Premer sesalnega nastavka: 355 mm - Filter material: iglasti poliester, 5 mikronov - Preostala vsebnost prahu: 0,5 mg/m3 - 58 cevnih filtrov Ø 160 x 935 mm - 3 vreče za ostružke, vsaka Ø 520 x 900 mm - Dimenzije D=1000 mm, Š=3000 mm, V=2200 mm - Teža 360 kg

Stanje: novo, Leto izdelave: 2025, Mere (dolžina/širina/višina) 920x2260x2150 mm Teža 300 kg Skupna priključna moč 7,5 kW Odsesovalna naprava CLEANER ECO-6500 - Odsesovalna zmogljivost 6500 m³/h - Moč motorja 7,5 kW - Hitrost vrtenja 3000 obr/min - Napetost 400 V, 50 Hz - Hitrost odsesovanja: 32 m/s - Premer sesalnega priključka 300 mm Gcsdpfxjvz Ehws Ab Tja - Filter material: filc poliester, 5 mikronov - Preostanek prahu 0,5 mg/m³ - 45 cevnih filtrov Ø 160 x 935 mm - 2 vreči za odpadke, vsaka Ø 520 x 900 mm - Dimenzije D=920 mm, Š=2260 mm, V=2150 mm - Teža 300 kg