Boben Črpalke Stisnjen Zrak nakup rabljenega (4.954)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, obratovalne ure: 10.198 h, Funkcionalnost: popolnoma funkcionalen, Hladilni sušilnik Kaeser TH451 Csdpfxexiva No Agterh 45 m3/min Leto izdelave 2010

Stanje: rabljeno, sestavljeno iz: kompresorja za stisnjen zrak, proizvajalec COMPAIR, tip: L37RS, leto izdelave: 2016, serijska številka: CD10022637001, moč: 37 kW in kompresorja za stisnjen zrak, proizvajalec COMPAIR, tip: L37RS, leto izdelave: 2017, serijska številka: CD10033524001, moč: 22 kW Csdpfoxad Hfox Agterh

Stanje: pripravljen za uporabo (rabljen), Sprejemnik zraka, rezervoar za stisnjen zrak, tlačna posoda za zrak, rabljena oprema Crodpfx Agsxciqnetoh Proizvajalec: Magnet Model: KF 904 Skupne dimenzije: Širina: 800 mm Globina: 800 mm Višina: 2680 mm Teža: 1008 kg Leto proizvodnje: 2016 Obratovalni tlak: 11 bar Obratovalna temperatura: od -20°C do +50°C Prostornina rezervoarja: 1000 litrov

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Hladilni sušilnik ATLAS COPCO FD410 zmogljivost: 24.600 l/min; leto: 2016 neto cena: 17.500 PLN bruto cena: 21.525 PLN Cjdpfxoxhgpre Agterh

Stanje: dober (rabljeno), Stisnjenozračna cev / tlačna cev iz aluminija Codpfx Asvv Nvnjgterh Navedena cena velja za vse cevi za stisnjen zrak skupaj. Skupaj: cca 325 m cevi Možen je tudi prodaja / oddaja posameznih količin!

Stanje: rabljeno, Compressed air – adsorption dryer, activated carbon adsorber with afterfilter BOGE type DAZ 5-2 For especially dry air Serial no. 38315449 Year of manufacture: 2013 Maximum flow rate: 250 liters/min = 15 m³/h Maximum operating pressure: 16 bar Connection thread: G 1/4" Mains connection: 230 Volt, 50 Hz - Pre- and afterfilter Space requirement (L x W x H): 400 x 210 x 580 mm Weight: 15 kg Crsdovrkhkspfx Agteh Good condition

Stanje: dober (rabljeno), Leto izdelave: 2019, številka stroja/vozila: 223230, Offer 25279 Cedpfsw Ekkwex Agtsrh Technical Data: - Tank capacity: 2000 L - Operating pressure: 11 bar - Maintenance opening - Ball valves - Pressure gauge - Required space: approx. W 1250 x H 2500 x D 1250 mm - Weight: approx. 450 kg

Stanje: rabljeno, Leto izdelave: 2015, No. 3241 Compressed Air System Schneider AM K 5-10 Used, year of manufacture 2015 Comprising: - 1 Screw Compressor Schneider Airsystems AM K 5-10 Final compression pressure: 10 bar Flow rate: 670 l/min Power: 5.5 kW Codpfx Ajw Sr I Negtsrh - 1 Refrigeration Compressed Air Dryer Schneider Airsystems DK 2200 ECO Nominal air flow: 132 m³/h (2220 l/min) Maximum operating pressure: 16 bar - 1 Compressed air receiver, 272 l - 4 Compressed air receivers, each 100 l - Approx. 200 m compressed air piping, aluminium composite, diameter 24 mm, with approx. 20 connection boxes Sale on behalf of customer, ex location near 73479 Ellwangen, without dismantling, transport or installation Dismantling, loading and transport optionally available by us Subject to error in description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sale as is Technical specifications, condition, year of manufacture and scope of delivery according to manufacturer’s brochure and/or previous owner, without guarantee Subject to prior sale For used machinery, all warranties are excluded; the following applies: "purchased as seen" Images and videos are for reference only and do not show the actual scope of delivery Terms of payment: prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Stanje: pripravljen za uporabo (rabljen), Speed range up to: 12,000 rpm Power at 6 bar compressed air: 900 W Stroke length (extension length): 1,000 mm Thread outlet: 45° with collet: 6 mm Crodpfx Aged Iatijtoh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Hladilni sušilnik ATLAS COPCO FD310 zmogljivost: 18.600 l/min; Credpfx Asxhgn Isgtoh leto: 2021 neto cena: 16.500 PLN bruto cena: 20.295 PLN

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, priključek za stisnjen zrak: 14 letvica, pritisk: 14 letvica, skupna širina: 1.310 mm, skupna višina: 5.060 mm, skupna masa: 944 kg, temperatura: −20 °C, obratovalni tlak: 14 letvica, kapaciteta rezervoarja: 5.000 l, tlak (maks.): 14 letvica, We manufacture the serially produced pressure tanks offered here in both horizontal and vertical configurations, covering a wide range of pressures and volumes in compliance with the Pressure Equipment Directive 2014/68/EU. This directive specifies the requirements for pressure equipment put on the market within the European Economic Area (EEA), applying to equipment with a maximum allowable pressure over 0.5 bar above atmospheric pressure. The PED (Pressure Equipment Directive) places a strong emphasis on product safety. Materials used in the construction of pressure equipment must meet strict quality standards as defined by the directive. Design, production, inspection, and installation processes must all be carried out in a manner that ensures safety. Our pressure tanks are suitable for a wide variety of applications. Argon tanks, for example, are used for welding alloyed and non-alloyed steels, while nitrogen tanks are used in industries such as pharmaceuticals, electronics, gas, and oil. Compressed air tanks are commonly used for storage and to minimize pulsation and loss of compressor-generated air. When installed in compressor rooms, these tanks also serve to cool compressed air and assist in clearing moisture and condensate from the system, thus prolonging compressor service life by reducing operational hours. The pressure equipment we manufacture bears the CE mark and comes with complete documentation required for commissioning approval by the Technical Inspection Authority. We design and manufacture industrial pressure tanks to meet a broad spectrum of requirements. Throughout every stage of cooperation—from inquiry and design intent to final inspection and acceptance by regulatory authorities—we provide support from our team of engineers and inspectors from the notified body. We offer tanks designed for use with various media: compressed air, oxygen, nitrogen, technical gases, water, and dry bulk containers for the medical and chemical sectors. Our tanks are available in both horizontal and vertical configurations and across a wide range of pressures and capacities, in conformity with Directive 2014/68/EU. We have our own in-house design office, enabling us to execute custom and non-standard projects, for which we possess all the necessary qualifications and authorizations. Csdpfxor En Ttj Agtjrh

Stanje: rabljeno, Pneumatic C-frame Press RECTUS - FRIEDMANN & MAIER Type K3000 / 50 / 6A Pneumatic Press Serial No. 3437 Year of manufacture: approx. 1990 Pressing force: 3.0 tons at 6 bar Pressing force: 2.6 tons at 5 bar Pressing force: 2.2 tons at 4 bar Pressing force: 1.6 tons at 3 bar Cedpfew A Srwjx Agtsrh Pressing force: 1.0 ton at 2 bar Throat depth: 150 mm Power stroke: 6 mm Pre-stroke: 50 mm Total stroke: 56 mm Ram surface: Ø 100 mm Tool holder: Ø 12 mm Installation height: max. 180 mm Table area: 200 x 200 mm Compressed air requirement: max. 6 bar - Pneumatic power cylinder with mechanical force booster (wedge-lever principle) - Press cylinder height adjustable on the frame via threaded spindle (50 mm) - Without pneumatic control system - Throttle valve for stroke speed adjustment Space requirements (L x W x H): 440 x 230 x 750 mm Weight: 127 kg Good condition 2 units available, price per unit

Stanje: dober (rabljeno), Leto izdelave: 2001, številka stroja/vozila: 487020, Ponudba 25263 Tehnični podatki: - Stoječa izvedba, vroče cinkana - Prostornina rezervoarja: 500 L - Obratovalni tlak: 11 bar - Servisna odprtina - Oznaka modela: 04-202-034 - Premer rezervoarja: 650 mm - Potreben prostor: pribl. Š 750 x V 2100 x G 850 mm Cjdpfx Ajw R Rufogtjrh - Teža: pribl. 150 kg

Stanje: dober (rabljeno), Rezervoar za stisnjen zrak, tlačna posoda, tlačni rezervoar, jeklenka za stisnjen zrak, tlačni kotel, rezervoar za kompresor, posoda za stisnjen zrak, akumulator stisnjenega zraka - Posoda za stisnjen zrak: akumulator stisnjenega zraka - Tip: CMBB posoda Ø 200 x 400 mm - Prostornina: ca. 12 l - Delovni tlak: 11 bar Codpfx Ajxaz H Njgtorh - Tehnični podatki: glej fotografijo identifikacijske ploščice - Dimenzije: 500/270/H235 mm - Teža: 6,5 kg

Leto izdelave: 2025, Stanje: novo, The refrigerated compressed air dryer is designed to lower the temperature of compressed air and remove water and oil particles contained in the flowing air. Refrigerated dryers are essential in applications where humid air could cause corrosion, contamination, or damage to tools, machinery, or finished products. By removing moisture, the dryer increases the reliability and service life of compressed air systems. The refrigerated dryer has been engineered for maximum efficiency and durability. The main design components include: 1. Air-to-air heat exchanger In the first stage, the incoming air passes through the heat exchanger, where it is pre-cooled by the colder air exiting the evaporator. Thanks to the counterflow operation, heat recovery increases the overall energy efficiency of the system. 2. Refrigeration circuit evaporator In the second stage, the compressed air enters the evaporator, where it is cooled down to a dew point temperature of 3°C. This condenses the contained water vapor and oil particles. 3. Condensate separator After cooling, the gas and condensate mixture goes to a highly efficient separator, where condensate is separated and automatically discharged from the device. 4. Fan control system Variable-speed fan technology allows for intelligent adjustment of cooling intensity to actual demand, reducing energy consumption and increasing component lifespan. Technical specifications: Inlet/Outlet pipe diameter (BSP): 1" Maximum working pressure: 10 bar Csdpfx Agjmt Dbhjterh Maximum inlet air temperature: ≤ 38°C Dew point temperature: 3°C Capacity: 1500 l/min Power: 0.58 kW Supply voltage: 230 V Dimensions (L x W x H): 380 x 600 x 625 mm Weight: 31 kg Refrigerant type and amount: R134a, 400 g The listed price is NET. Transport costs are not included in the price. For more information, please contact us by phone or email. We invite you to view our full offer on our website.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 2.700 h, Funkcionalnost: popolnoma funkcionalen, COMPRESSED AIR SYSTEM INCLUDING: Csdpfew E Hbfox Agtorh - SCREW COMPRESSOR 15 KW / 20 HP WITH INVERTER CONTROL, AIR DELIVERY FROM 920 TO 2020 L/MIN - ENERGY-SAVING DRYER, CAPACITY 2400 L/MIN - VERTICAL TANK 725 L, GALVANIZED, WITH SAFETY VALVE AND PRESSURE GAUGE - PREFILTER FOR SOLID PARTICLES UP TO 5 MICRONS, INCLUDING OILY LIQUIDS - OIL REMOVAL FILTER FOR SOLID AND OILY PARTICLES DOWN TO 0.01 MG/M³

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, priključek za stisnjen zrak: 11 letvica, pritisk: 11 letvica, skupna širina: 1.310 mm, skupna višina: 5.060 mm, skupna masa: 794 kg, temperatura: −20 °C, obratovalni tlak: 11 letvica, kapaciteta rezervoarja: 5.000 l, tlak (maks.): 11 letvica, We manufacture the offered series pressure tanks in horizontal and vertical configurations, covering a wide range of pressures and volumes, in compliance with the Pressure Equipment Directive 2014/68/EU. This directive sets out the requirements for the placing on the market of pressure equipment within the European Economic Area (EEA). It applies to pressure equipment with a maximum allowable pressure above 0.5 bar over atmospheric pressure. Codpfx Ajr En Taogtorh The PED places great emphasis on product safety. Materials used in the manufacture of pressure equipment must meet strict quality standards according to the directive. Design, manufacturing, inspection, and installation of the pressure vessels must all be carried out to ensure maximum safety. Our pressure tanks offer a wide range of applications. Argon tanks are typically used, for example, in welding alloyed and non-alloyed steel. Nitrogen tanks are employed in industries such as pharmaceuticals, electronics, gas, and oil. Compressed air receivers are mainly used for storing and dampening pulsation and minimizing losses of air produced by compressors. Pressure vessels installed in compressor rooms are also used for cooling compressed air and serve as auxiliary devices in the purification of compressed air from water and condensate. In addition, these tanks increase the service life of compressors by reducing their operating times. All pressure equipment manufactured by us bears the CE marking and comes with complete documentation required for commissioning approval by the Technical Inspection Authority. We design and manufacture pressure tanks for a broad range of industrial sectors. At every stage of cooperation—from the initial inquiry, through project planning, up to the acceptance of the finished tank by the supervisory authority—we ensure the support of our team of engineers and certified inspectors. We offer tanks suitable for operation with various media: compressed air, oxygen, nitrogen, technical gases, water, and bulk material containers for medical and chemical industries. We manufacture both horizontal and vertical pressure vessels in a wide spectrum of pressures and volumes in accordance with Directive 2014/68/EU. Our in-house design office enables the execution of custom and non-standard projects, for which we possess all necessary certifications and authorizations.

Stanje: rabljeno, Pneumatic toggle press, SCHMIDT Type 34-12 pneumatic press Manuf. No. 400160-03 Serial No. 0028 Year of manufacture 2008 Pressing force: 28 kN = 2.8 tons Throat depth: 130 mm Ram surface: 63 x 36 mm Ram stroke: 12 mm Clamping shank bore: Ø 20 mm with clamping screw Compressed air requirement: 2 to 6 bar - Stroke length continuously adjustable via adjustable fixed stop for the upper stroke end position - Fine adjustment for lower stroke end position with scale (1 graduation = 0.05 mm) - Stroke release via pneumatic valve, activation by material insertion Crsdjv Srfkopfx Agtjh - 45° press stand, custom aluminum construction - Special press tooling for 3x Ø 2.5 mm punch holes - Complete assembly mounted on aluminum base plate 600 x 600 x 20 mm Installation space (L x W x H): 720 x 600 x 600 mm Weight: 68 kg Very good condition

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Manufacturer: Fasti GmbH Model: ERD 65 B Connected load: 0.9 kW Codpfx Aevzwrbogtjrh Two units available! Price: 850 EUR per unit!

Leto izdelave: 2018, Stanje: pripravljen za uporabo (rabljen), A directly-acting pneumatic press from Mäder is available. Press force at 6 bar: 56 kN, max. stroke length: 80 mm, compressed air input min./max.: 3.2 bar – 6 bar, max. tool dimensions X/Y: 310 mm / 220 mm, max. tool weight: 14 kg, total stopping time: 0.1 s. Throat depth press head/frame: 150 mm / 300 mm, working height: 195 mm – 290 mm, table dimensions X/Y: 190 mm / 190 mm, operating hours: 59 h. Includes pressure gauge. Documentation available. Inspection on site is possible. Crsdpou St Idofx Agtjh

Leto izdelave: 2025, Stanje: novo, The refrigeration compressed air dryer is designed to lower the temperature of compressed air and remove water and oil particles contained in the flowing air. Refrigeration dryers are essential in applications where humid air could cause corrosion, contamination, or damage to tools, machines, or finished products. By eliminating moisture, the dryer increases the reliability and longevity of compressed air systems. The refrigeration dryer has been engineered for maximum efficiency and durability. Key construction features include: 1. Air-to-air heat exchanger In the first stage, the incoming air passes through a heat exchanger where it is pre-cooled by the outgoing air leaving the evaporator. The use of counterflow maximises heat recovery and the overall energy efficiency of the system. 2. Refrigeration circuit evaporator In the second stage, compressed air is routed through the evaporator, where it is cooled to the dew point temperature of 3°C. This results in condensation of water vapour and oil particles present in the air. 3. Condensate separator Crodpjmt Dcfsfx Agtjh After cooling, the gas-condensate mixture is directed to a high-efficiency separator, where condensate is separated and automatically discharged outside the unit. 4. Fan control system Variable-speed fan technology enables intelligent adjustment of cooling intensity to match actual demand, reducing energy consumption and increasing component lifespan. Technical specifications: Inlet/outlet pipe diameter (BSP): 1" Maximum working pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Dew point temperature: 3°C Capacity: 2800 l/min Power: 0.58 kW Supply voltage: 230 V Dimensions (L x W x H): 420 x 700 x 690 mm Weight: 37 kg Type and amount of refrigerant: R134a, 550 g

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, priključek za stisnjen zrak: 8 letvica, pritisk: 8 letvica, skupna širina: 1.310 mm, skupna višina: 5.060 mm, skupna masa: 649 kg, temperatura: −20 °C, obratovalni tlak: 8 letvica, kapaciteta rezervoarja: 5.000 l, tlak (maks.): 8 letvica, We manufacture the offered series pressure tanks in both horizontal and vertical configurations, covering a wide range of pressure ratings and capacities in compliance with the Pressure Equipment Directive 2014/68/EU. This directive specifies the requirements for pressure equipment to be placed on the market within the European Economic Area (EEA) and applies to equipment with a maximum allowable pressure greater than 0.5 bar above atmospheric pressure. The PED places major emphasis on product safety. Materials used for the construction of pressure equipment must meet the strict quality standards set forth by the directive. Design, manufacturing, inspection, and installation processes must be carried out in a manner that guarantees safety. Crodpfsr En S Dox Agtoh Our pressure tanks serve a wide array of applications. Argon tanks, for instance, are used in welding alloyed and unalloyed steels, while nitrogen tanks are commonly employed across the pharmaceutical, electronics, gas, and oil industries. Compressed air receivers are used internally for air storage and to minimize pulsations and loss of air supplied by compressors. When installed in compressor rooms, pressure tanks also help cool the compressed air and serve an auxiliary function in removing water and condensate from the air. Additionally, these tanks extend the service life of compressors by reducing their operating times. All pressure equipment we manufacture bears the CE marking and is supplied with complete documentation required for operational approval by the Technical Inspection Authority. We design and produce pressure vessels for industries in a broad sense. At every stage of the cooperation—from initial inquiry and design intent through to acceptance of the finished tank by regulatory authorities—we guarantee professional support from our team of engineers and inspectors from an accredited body. We offer tanks suitable for various media: compressed air, oxygen, nitrogen, technical gases, water, as well as bulk material containers for the medical and chemical industries. We manufacture horizontal and vertical tanks in a wide range of pressures and volumes, always in accordance with the PED 2014/68/EU. Our in-house design office allows us to deliver bespoke, non-standard projects, for which we possess all required competencies and authorizations.

Stanje: rabljeno, Filter assembly, COMPAIR filter unit for compressor systems Compressed air filter Type: CF 0087B ZP Factory No.: 3363006 / 05 / 005 Operating pressure: max. 16 bar Crsdehalvdjpfx Agteh Threaded connection: G 1 1/2" Flow rate: approx. 8.5 m³/min Filter element no.: CE 0087B - Filter housing made of aluminium Weight: 5 kg Dimensions (L x W x H): 125 x 110 x 420 mm Good condition

Stanje: rabljeno, Pneumatic screwdriver, air screwdriver DESOUTTER Pneumatic screwdriver, inline screwdriver for screwdriving technology Csdpfx Agofgrrhotsrh Type SD 140-AR510-S4Q Torque range: 0.6-14.0 Nm Speed: max. 510 rpm Air pressure requirement: 6 bar Air consumption: 8.7 l/s Bit holder: M6 - Selector switch for clockwise and counterclockwise rotation (rotary ring control) - Without automatic shut-off - Pneumatic control line Ø 4 mm - Air supply connection for screwdriver function min. Ø 10 mm - Aluminium bracket for handling device - Screw feed Ø 12 mm (internal diameter) Dimensions L x W x H: 60 x 46 x 870 mm Weight: 2.8 kg Good condition 4 units available, price per screwdriver

Stanje: rabljeno, Pneumatic Press, Compressed Air Press BOSCH Type Serial No.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 tons at 5 bar 15 kN = 1.5 tons at 4 bar 12 kN = 1.2 tons at 3 bar 8 kN = 0.8 tons at 2 bar 6 kN = 0.6 tons at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table surface: 245 x 200 mm Ram area: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator Credpfx Ageh U Dtuotjh - Pneumatic cylinder with ram height adjustable by 90 mm - Pneumatic two-hand operation - Mounted on metal frame with wooden panels Required space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight incl. table base: 140 kg Good condition