Rezervoar za stisnjen zrak

ALMIG MB 030603-1.500

Stanje: novo, Saw blade diameter: 520 x Ø 50 mm Cutting diameter: 200 mm Cutting length: 420 mm Cutting height at 45°: 140 mm Saw blade specifications: 520x3.6/3.0x50 mm Speed: 2,800 rpm Extraction port diameter: 100 mm Total power requirement: 3.0 kW Machine weight approx.: 310 kg Dimensions (L x W x H): 1,400 x 900 x 1,650 mm - Cross-cut and mitre circular saw for cross cuts - Dual-sided mitre adjustment (60°/45°) with fixed stops - Dual-sided bevel cutting (60°/45°) with fixed stops - Robust cast iron construction - Precise linear guide of the tool carriage with ball bushings on hardened and ground steel shafts - Manual saw feed - Infinitely adjustable blade height - Connection for optional extraction unit Equipment: - 3.0 kW motor for aluminium cutting - Blade tilting via handwheel and worm gear (for bevel cuts) - Saw blade diameter: 520 mm - Saw blade bore: 50 mm - Saw blade speed: 2,800 rpm - 400 V / 3 kW (S6/40%) motor with brake and automatic star-delta starter - Machine weight approx.: 250 kg Cutting Data: Gbsdpsxaaxdofx Abrsu - Cutting length at 90° = 420 mm - Cutting height at 90° = 200 mm - Cutting length at 45° = 295 mm - Cutting height at 45° = 140 mm Included Special Accessories: - HM saw blade 520x3.6/3.0x50 mm - Hydraulically adjustable feed brake - Pneumatic material clamping from above, consisting of: * 2 vertical clamping cylinders, adjustable with lever valve - Pneumatic saw blade spray system - Machine tiltable from the front to both sides via hand crank - Machine base - Powerful drive motor (3.0 kW)

Stanje: rabljeno, Manual turret lathe: GDW Type/Model: RD 250 Condition: Used Centre height: 125 mm Max. distance spindle nose – turret head: 400 mm Swing over bed: 260 mm Swing over cross slide: 128 mm Spindle nose DIN 55027: Size 4 Spindle bore: 38 mm Internal taper similar to DIN 228: MT 5 Collet capacity: 26 mm Infinitely variable up to: 60–3,000 rpm Regulated AC motor 100% duty cycle, 70 Hz: 4.6 kW Turret slide travel: 100 mm Cut-off slide travel: 90 mm Turret tool holder: 6 × 3/4" Length x width x height: approx. 1,300 × 700 × 1,400 mm Weight depending on equipment: approx. 520 kg Connected load: 9 kW Equipment: - Vibration-damped direct drive for the main spindle, steplessly controlled, with electromagnetic brake for spindle braking and spindle stop in emergency-off mode - 6-position slant-bed turret slide with Ø 3/4" holders Gjdpfx Aezcb Ruebrjbu - Infinitely variable feed rate adjustment - Turret slide with feed drive - Pneumatic collet chuck - Extensive set of collets - Emergency-stop palm button - Coolant system - Spindle guard

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Circular Saws Model ZS 200NF Crosscut and mitre circular saw featuring a maximum cutting height of 200 mm Robust grey cast iron construction Precision ball bushing guide for the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Re-adjustable fixed stops Lower saw blade guard can be connected to extraction system Machine mounted on a mobile machine base with 1.5 m long roller conveyors on both left and right sides Left side equipped with scale and adjustable stop Gbsdpfx Asw Hl Aqebrou Technical Data Motor: 400 V / 5.0 kW Speed: 2800 rpm Cutting length: 420 mm (at 90°) Cutting height: 200 mm (at 90°) Mitre range - horizontal: 45°- 90°- 25° Mitre range - vertical: 60°- 90°- 30° Saw blade diameter: 520 mm (not included as standard) Extraction port: 100 mm Weight: 490 kg Location: From stock 54634 Bitburg - Immediately available - On request, we are happy to offer you the saw blade as well.