Kovanje Zrak Kladivo nakup rabljenega (4.276)

Leto izdelave: 2018, obratovalne ure: 1 h, Stanje: kot nova (razstavni stroj), številka stroja/vozila: 1CY1119D00007, DONALDSON Refrigeration Dryer Buran DC 0225 AB with electronic control unit with electronically level-controlled condensate drain Prodpfxedy Drbe Agped Technical Specifications: Model: BURAN DC0225AB Medium: Compressed air, free from aggressive substances Volume flow: 3.75 m³/min Operating pressure: 7 bar(g) Pressure dew point: 3° C Compressed air connection: 1 1/4" Electrical supply voltage: 230 V / 50 Hz / single phase Frequency: 50 Hz Dimensions, Weight Height: 870 mm Width: 480 mm Length: 660 mm Weight: 68 kg

Leto izdelave: 2025, Stanje: novo, The refrigerated compressed air dryer is designed to lower the temperature of compressed air and remove water and oil particles contained in the flowing air. Refrigerated dryers are essential in applications where humid air could cause corrosion, contamination, or damage to tools, machinery, or finished products. By removing moisture, the dryer increases the reliability and service life of compressed air systems. The refrigerated dryer has been engineered for maximum efficiency and durability. The main design components include: 1. Air-to-air heat exchanger In the first stage, the incoming air passes through the heat exchanger, where it is pre-cooled by the colder air exiting the evaporator. Thanks to the counterflow operation, heat recovery increases the overall energy efficiency of the system. 2. Refrigeration circuit evaporator In the second stage, the compressed air enters the evaporator, where it is cooled down to a dew point temperature of 3°C. This condenses the contained water vapor and oil particles. 3. Condensate separator After cooling, the gas and condensate mixture goes to a highly efficient separator, where condensate is separated and automatically discharged from the device. 4. Fan control system Variable-speed fan technology allows for intelligent adjustment of cooling intensity to actual demand, reducing energy consumption and increasing component lifespan. Technical specifications: Inlet/Outlet pipe diameter (BSP): 1" Maximum working pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Podpjmt Dbhjfx Agperd Dew point temperature: 3°C Capacity: 1500 l/min Power: 0.58 kW Supply voltage: 230 V Dimensions (L x W x H): 380 x 600 x 625 mm Weight: 31 kg Refrigerant type and amount: R134a, 400 g The listed price is NET. Transport costs are not included in the price. For more information, please contact us by phone or email. We invite you to view our full offer on our website.

Leto izdelave: 1980, Stanje: pripravljen za uporabo (rabljen), Two compressed air tanks are available. 1) Karl Kremsmüller u. Co., year of manufacture: 1980, operating pressure: 7 bar, test pressure: 9.1 bar, operating temperature: 20°C, medium: compressed air, capacity: 5,300 liters. 2) Engelbert Dax, year of manufacture: 1973, capacity: 15,000 liters, operating pressure: 4 ATÜ, test pressure: 5.2 ATÜ. An on-site inspection is possible. Predoumwg Eopfx Agpod

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1974, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1276, CNC vroče radialno kovanje GFM SX-13 Leto izdelave: 1974 / 2022 Nova krmilna enota PLC SIEMENS S7 Številka stroja: 1276 Število kladiv: 4 Kovalna sila posameznega kladiva: 160 ton Število udarcev kladiva na minuto: 700/min Dolžina kladiva: 240 mm Območje nastavitve premera: 80 mm Največji premer za kovanje: - Konstrukcijsko jeklo, okrogel prerez: Ø 130 mm - Kvadratni prerez: Ø 115 mm Najmanjše dimenzije za kovanje: Ø 25 mm Maks. hod manipulatorja A: 6820 mm Pjdpfxeq U R T Nj Agpsrd Maks. hod manipulatorja B: 7150 mm Največja dolžina obdelovanca: 6000 mm Hitrost manipulatorja pri hitrem pomiku: 400 mm/s Skupna priključna moč: 300 kW, 380 V, 50 Hz Dimenzije stroja: Višina kovanja nad tlemi: 615 mm Skupna višina stroja nad tlemi: 1665 mm Skupna dolžina stroja: 32.670 mm Skupna dolžina temeljev: 33.400 mm Skupna širina stroja (brez pomožne opreme): cca 3885 mm Skupna širina temeljev: 16.000 mm Skupna masa stroja: 84.000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Sušilnik PARKER HIROSS K45/16D2-G230MT Kapaciteta: 7000 l/min Leto proizvodnje: 2016 Pjdow Nh A Djpfx Agpsrd Sušilnik je popolnoma delujoč; zagotavljamo servis. neto cena: 5200 PLN bruto cena: 6396 PLN

Stanje: novo, - User-friendly operating concept - Efficient design for cost-effective and safe operation - Cooling fan with variable speed control from 0–100%, eliminating the need for the conventional pressure switch and thermostat for fan control - Fewer wearing parts while maintaining a constant pressure dew point - Control system displays five different alarm statuses and retains them in memory - Refrigeration compressor shuts off at ambient temperatures below 15°C if there is no compressed air flow - Clear layout and easy access to all maintenance components - Integrated automatic condensate drain Key Advantages at a Glance - High economic efficiency - Excellent price-performance ratio - No unnecessary compressed air losses thanks to the integrated electronic condensate drain - Connected tools and machines are optimally protected - User-friendly operating concept Prjdpfsu T Hrvox Agpjd Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria - Air flow rate l/min: 1200 l/min - Air flow rate m³/h: 72 m³/h - Maximum pressure: 16 bar - Air connection: 1/2" - Power consumption: 0.2 kW Dimensions and Weights: - Length (product) approx.: 325 mm - Width/Depth (product) approx.: 430 mm - Height (product) approx.: 445 mm - Weight (net) approx.: 24 kg

Leto izdelave: 2021, Stanje: novo, številka stroja/vozila: TR0054_ALMRD400, New ALMIG ALM-RD400 Refrigerated Compressed Air Dryer (available immediately!) Pedpfog Tvngsx Agpjrd Including pre-filter and after-filter Model: ALM-RD 400 Delivery rate: 6.25 m³/min* TR0054 Reliable and energy-efficient air-cooled refrigerated dryer ALM-RD 400 Compact footprint Low operating costs Two integrated filters (pre-filter and micro-filter) Energy-efficient refrigerant R134a State-of-the-art heat exchanger for maximum energy savings Max. operating pressure: 16 bar Max. inlet temperature: 60°C Min./max. ambient temperature: 5/50°C Voltage/Frequency: 230V/50Hz Compressed air connection: 1 1/2" Dimensions (L x W x H): 555 x 505 x 874 mm Weight: 86 kg * Maximum compressed air flow at 35°C inlet temperature, 7 bar, 25°C ambient temperature, pressure dew point 3°C Water in compressed air can cause severe damage to pneumatic tools, expensive machinery (CNC), or similar applications. Therefore, we recommend one of our competitively priced compressed air dryers from the ALM-RD series. Convenient leasing for new machines available through our partner bank. Visit our showroom! We always have a large selection of new and used compressors in stock!

Leto izdelave: 2025, Stanje: novo, The refrigeration compressed air dryer is designed to lower the temperature of compressed air and remove water and oil particles contained in the flowing air. Refrigeration dryers are essential in applications where humid air could cause corrosion, contamination, or damage to tools, machines, or finished products. By eliminating moisture, the dryer increases the reliability and longevity of compressed air systems. The refrigeration dryer has been engineered for maximum efficiency and durability. Key construction features include: 1. Air-to-air heat exchanger In the first stage, the incoming air passes through a heat exchanger where it is pre-cooled by the outgoing air leaving the evaporator. The use of counterflow maximises heat recovery and the overall energy efficiency of the system. 2. Refrigeration circuit evaporator In the second stage, compressed air is routed through the evaporator, where it is cooled to the dew point temperature of 3°C. This results in condensation of water vapour and oil particles present in the air. 3. Condensate separator After cooling, the gas-condensate mixture is directed to a high-efficiency separator, where condensate is separated and automatically discharged outside the unit. Predpomt Dcfofx Agped 4. Fan control system Variable-speed fan technology enables intelligent adjustment of cooling intensity to match actual demand, reducing energy consumption and increasing component lifespan. Technical specifications: Inlet/outlet pipe diameter (BSP): 1" Maximum working pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Dew point temperature: 3°C Capacity: 2800 l/min Power: 0.58 kW Supply voltage: 230 V Dimensions (L x W x H): 420 x 700 x 690 mm Weight: 37 kg Type and amount of refrigerant: R134a, 550 g

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1964, Forming stages: 3, Pressing force: 6500 kN, Stroke rate: 110 strokes/min, Ram stroke: 180 mm, Working area X/Y: 600 mm / 800 mm, Table dimensions X/Y: 800 mm / 1000 mm, Ram adjustment: 10 mm, Drive power: 37 kW. An on-site inspection is possible. Podpjwm Nm Hsfx Agpjrd

Leto izdelave: 1974, Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1293, CNC radialna kovaška stiskalnica GFM mod. SX-16 Proizvajalec: GFM (Avstrija) Leto izdelave: 1974 / 2022 Model: SXL-16 Serijska številka: 1293 Krmiljenje (PLC): Siemens S7 - Technology V4.2 s CNC Bosch Rexroth XM Število kladiv: 4 Kovalna sila: 800 t (200 t na kladivo) Število udarcev na minuto: 580 Dolžina kladiva: 320 mm Maksimalen razpon nastavitve kladiv - izračunano po premeru: 100 mm Maksimalen premer kovanega izdelka za: - ogljikovo konstrukcijsko jeklo: krožni presek – Ø 160 mm kvadratni presek – 130 mm - visokolegirano jeklo: krožni presek – Ø 120 mm kvadratni presek – 100 mm Ekstremen štirikotnik: 12 x 120 mm Maksimalna dolžina kovanega izdelka: 6000 mm Minimalni in maksimalni premer vpenjanja v manipulator: 30 - 160 mm Hod manipulatorja A: 6800 mm Hod manipulatorja B: 7200 mm Prehod skozi manipulator: Ø 130 mm Hitrost manipulatorjev v primeru hitrega pomika: 400 mm/s Delovna hitrost pomika manipulatorjev (brezstopenjsko nastavljivo): 10 ÷ 115 mm/s Tlak hladilne vode: 3 ÷ 5 bar Temperatura dovodne vode: maks. 30 °C Poraba hladilne vode: 34 m³/h Prsdpfx Asq U Sa Segpjd Premer cevi za hladilno vodo: 2” Tlak stisnjenega zraka: min. 5 bar Premer cevi za stisnjen zrak: Ø20 mm Poraba stisnjenega zraka: 1,5 Nm³/h Napajanje (nazivna moč): 350 kW Napetost motorja: 500 V Napetost krmiljenja: 220 V Moč glavnega motorja: 200 kW Moč motorjev črpalk: 185 kW Moč motorjev za manipulatorje: 2 x 22 kW Dimenzije stroja Višina osi kovanja nad tlemi hale: 750 mm Maksimalna višina stroja nad tlemi hale: 2050 mm Maksimalna dolžina stroja na tleh hale: 33.740 mm Dolžina temelja: 34.200 mm Maksimalna širina stroja na tleh hale brez nakladalne opreme: 4350 mm Širina temelja: 15.600 mm Neto masa stroja: 124.490 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Sušilnik KAESER DC169E Kapaciteta: 16,88 m3/min Leto izdelave: 2018 Psdpew Nh Akefx Agpsrd Sušilnik je popolnoma delujoč; nudimo servis. Neto cena: 8.200 PLN Bruto cena: 10.086 PLN

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 800x1170x2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces represent an ideal solution for energy utilization in woodworking industrial and craft enterprises. They are designed for heating larger usable areas, such as workshops and production halls in craft and industrial operations. These hot air systems require no long heat-up phases and can quickly heat the workshop, joinery, or other production areas. Fuel used includes solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and safety regulation 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages required by the 1st German Federal Emission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output (kcal): 73,000 - Fuel consumption: 19 kg/h Predpfx Ajvz Hq Tjgped - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Loading door: 430 x 430 mm - Hot air blower: 0.98 kW / 230 V - Combustion chamber negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room: approx. 1,600 m³ - Heatable area: approx. 300 m² - Required space: Width 800 mm, Depth 1170 mm, Height 2200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90 % - Chimney draft: 16 Pa - Flue gas temperature: 291°C - Hot air outlet connectors: 2 x Ø 220 mm - For further technical details, please refer to the attached datasheet The two pipe connectors for outgoing hot air are located at the rear lower section of the furnace. A maximum pipe length of 20 meters per connector is permitted for air distribution.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 1 h, Display model: New KAESER TBH 14 refrigerated compressed air dryer with electronically controlled condensate drain Year of manufacture: 2024 Technical data: Volume flow: 1.20 m³/min Pressure dew point: 3°C Overpressure: 3 to 16 bar Ambient temperature: +3°C to +50°C Max. inlet compressed air temperature: +60°C Compressed air connection: G 1/2" Dimensions (W x D x H): 462 x 525 x 548 mm Pjdpjtqm S Rjfx Agpjrd Weight: 33 kg Electrical supply: 230 V / 1 / 50 Hz Visit our showroom in Erlangen. On over 450 sqm of exhibition space, you will find a large selection of used and new compressors.

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Manufacturer: Fasti GmbH Model: ERD 65 B Connected load: 0.9 kW Two units available! Price: 850 EUR per unit! Pedpfx Agevzwrbspord

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Macchina CNC di stampaggio radiale Prjdpfsq U R Ruex Agpod

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industries and workshops. They are designed to heat larger areas such as factory halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up periods and can warm production halls, joineries, or carpentry shops as well as other production sites in a very short time. Solid wood and its by-products (e.g., solid timber board scraps, chips, sawdust, pellets, or briquettes) are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission values required by the German 1st BImSchV. - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output (kcal): 43,000 Prodpfx Agovz Hq Heped - Fuel consumption: 15 kg/h - Air flow: 4,900 m³/h - Combustion chamber depth: 650 mm - Feed door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Combustion chamber negative pressure: 0.2-0.3 mbar - Flue draught requirement at rated output: 0.18 mbar - Heatable room volume: approx. 1,000 m³ - Heatable floor area: approx. 220 m² - Required space: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90 % - Chimney pressure: 13 Pa - Exhaust gas temperature: 290 °C - Hot air outlet stubs: 2 x Ø 200 mm - Further technical details can be found in the attached data sheet The two hot air outlet pipes are located at the lower rear side of the furnace. A maximum of 20 meters of pipe per outlet is permitted for air distribution.

Leto izdelave: 2022, Stanje: novo, new KAESER compressed air receiver 250 liters upright, galvanized, 11 bar (includes fitting set and pressure gauge set) Year of manufacture: 2023 High-quality compressed air tank in a galvanized version. Galvanized inside and outside by immersion bath according to DIN EN ISO 1461. Connection nozzles for tapered threads. Technical data: - Volume: 250 liters - Max. overpressure: 11 bar - Diameter: 500 mm - Tank height: 1545 mm - Weight: 84 kg - Compressed air inlet: G 3/4" - Compressed air outlet: G 3/4" - Safety valve connection: G 3/8" - Condensate drain connection: G 1 1/2" Tank approval: RL2014/29/EU Service opening according to AD2000: 1 x handhole Psdpfsiqyl Nox Agpjrd Min. operating temperature: -10°C Max. operating temperature: +80°C Surface coating: galvanized Convenient financing for new machines via our partner bank available. Visit our showroom. We always have a large selection of new and used compressors in stock!

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industry and craft enterprises. They have been specifically designed for heating large work areas, such as workshops and workspaces in trade and industrial businesses. These hot air systems require no lengthy preheating phases and quickly warm up carpentry or joinery shops as well as other production facilities. Suitable fuels include solid wood and wood processing by-products, such as solid wood panel residues, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24th, 1996, and the safety guidelines of Directive 89/392/CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the required emission values in accordance with the 1st BImSchV. - Automatic and continuous air operation Predpfsvz Hqyox Agpsd - Thermal output: 390 kW - Thermal output (kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Space requirements: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connection): 300 mm - Chimney diameter (reference): 350 mm - Efficiency: 85–90% - Chimney pressure: 11.5 Pa - Flue gas temperature: 289°C - Hot air outlet connectors: 2 x Ø 450 mm - For further data, please refer to the attached data sheet The two pipes for the outgoing hot air are located at the lower rear of the furnace. For each pipe, a maximum duct length of 20 meters is permissible for air distribution. Greater lengths are optionally available by agreement with the manufacturer. Please contact us for details.

Leto izdelave: 2022, Stanje: dober (rabljeno), Used horizontal compressed air tank, 500 liters, painted, 11 bar (without fitting set) incl. tank documentation ( total of 2 units available) Year of manufacture: 2022 High-quality compressed air tank with painted finish. Technical data: - Volume: 500 liters - Permissible operating pressure: 11 bar - Medium: Air - Diameter: 600 mm - Tank height: 710 mm - Weight: 165 kg - Compressed air inlet connection: 1 x G 2" Prodpfx Agom Drx Iepsd - Compressed air outlet connection: 1 x G 2" - Safety valve connection: G 1/2" - Condensate drain connection: G 1/2" - Service opening: see air inlet & outlet Manufactured and tested in accordance with EU Directive AD 2000 Design temperature: -10 °C to +120 °C Surface coating: painted Attractive leasing options available for new machines through our partner bank. Visit our showroom. We always have a wide selection of new and used compressors in stock!

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Hot air furnace MARTINA 30-15 The MARTINA hot air furnaces are an ideal solution for energy utilization in woodworking industry and craft businesses. They are designed for heating larger utility areas such as workshop halls and workspaces of industrial and artisanal enterprises. These hot air systems require no long warm-up phases and quickly heat up the workshop, carpentry, or other production facilities in a short time. Solid wood and its by-products, e.g., solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes, can be used as fuel. MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the machinery safety directive 89/392/EEC. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output (kcal): 12,720 - Fuel consumption: 4.5 kg/h - Air flow: 2,400 m3/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Combustion chamber negative pressure: 0.2 – 0.3 mbar - Draft requirement (nominal output): 0.18 mbar - Heatable room volume: approx. 300 m3 - Heatable area: approx. 60 m2 - Space requirements: Width 600 mm, Depth 800 mm, Height 1900 mm - Weight: 230 kg Prsdpfx Agevz Hqtopod - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Required chimney draft: 11 Pa - Flue gas temperature: 286 °C - Hot air outlet nozzles: 2 x Ø 200 mm - For further technical data, please refer to the attached data sheet The two hot air outlet pipe connections are located at the rear bottom of the unit. A maximum duct length of 20 meters per outlet is permitted for air distribution.

Leto izdelave: 2018, obratovalne ure: 1 h, Stanje: kot nova (razstavni stroj), DONALDSON Refrigeration Compressed Air Dryer Buran DC 045 AB with electronic control with electronically level-controlled condensate drain Technical Data: Model: BURAN DC0450AB Medium: Compressed air, free from aggressive components Volume flow rate: 7.50 m³/min Operating pressure: 7 bar (overpressure) Pressure dew point: 3° C Compressed air connection: 2" Electrical supply voltage: 230 V / 50 Hz / 1 phase Frequency: 50 Hz Dimensions, Weight Height: 1055 mm Pjdpfx Asdzb Hrogpjrd Width: 645 mm Length: 920 mm Weight: 116 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces provide the ideal solution for energy utilization in wood processing industries and workshops. Designed for heating large utility areas such as factory halls and workspaces in craft and industrial operations, these hot air systems require no prolonged preheating phases and can quickly warm up carpentry or joinery workshops, as well as other production facilities. Fuel materials include solid wood and its by-products, e.g., solid wood panel offcuts, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU directive 98/37CE, Italian Presidential Decree N°459 of July 24, 1996, and the safety directive of machinery 89/392 CE. All MARTINA Series hot air furnaces (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission values required by Germany’s 1st BImSchV regulation. - Automatic and continuous air operation - Thermal output: 29.8 kW - Thermal output (Kcal): 25,700 - Fuel consumption: 9 kg/h Prodpfx Agevz Hqmspod - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Hot air fan: 0.49 kW / 230 V - Combustion chamber negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Footprint required: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Hot air outlet nozzles: 2 x Ø 200 mm - Further technical data available in the attached data sheet The two hot air outlet connections are located at the rear lower section of the furnace. Each outlet may be connected with a maximum pipe length of 20 meters for air distribution.

Leto izdelave: 2018, obratovalne ure: 1 h, Stanje: kot nova (razstavni stroj), številka stroja/vozila: 1CY1116D00007, DONALDSON Refrigerated Air Dryer Buran DC 0125 AB with electronic control with electronically level-controlled condensate drain Technical Data: Model: BURAN DC0125AB Medium: Compressed air, free of aggressive components Flow Rate: 2.08 m³/min Operating Pressure: 7 bar (g) Pressure Dew Point: 3°C Compressed Air Connection: 1" Electrical Supply: 230 V / 50 Hz / 1 phase Frequency: 50 Hz Dimensions, Weight Prsdpfx Agsdy Dqkspjd Height: 645 mm Width: 360 mm Length: 410 mm Weight: 34 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 1300 x 1700 x 2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industries and craft businesses. They are designed for heating larger usable areas such as factory halls and workspaces in industrial and craft enterprises. These hot air systems do not require long heat-up periods and can quickly warm up workshops in joineries, carpentries, or other production facilities. Fuel materials include solid wood and its by-products, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU directive 98/37CE (Italian Presidential Decree No. 459 of July 24, 1996) and safety directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission standards stipulated by the 1st BImSchV. - Automatic operation and continuous air operation - Thermal output: 233 kW - Thermal output (kcal): 199,000 kcal - Fuel consumption: 50 kg/h - Air delivery rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox vacuum: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Required space: width 1300 mm, depth 1700 mm, height 2550 mm Psdpfx Aevz Hqgogpjrd - Weight: 1200 kg - Flue pipe diameter (outlet): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 450 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for the outgoing hot air are located at the rear of the furnace at the bottom. Each pipe connector allows a maximum of 20 meters of ducting for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Warm Air Furnace MARTINA 120 The MARTINA warm air furnaces provide an ideal solution for energy utilization in wood-processing industrial and craft businesses. They have been developed to heat large usable areas, such as workshops and workspaces in craft and industrial facilities. These warm air systems require no long preheating phases and heat the workshop or production space – such as in carpentry or joinery shops – within a very short time. They can be fueled with solid wood and its by-products, e.g., solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes. MARTINA warm air furnaces comply with EU Directive 98/37CE, Presidential Decree Italy No. 459 dated July 24, 1996, and Safety Directive 89/392 CE. All MARTINA series warm air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both levels of the 1st BImSchV prescribed emission limits. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 Kcal - Fuel consumption: 30 kg/h - Air output: 9,000 m³/h - Combustion chamber depth: 950 mm - Loading door: 460 x 440 mm - Warm air fan: 1.05 kW / 230 V Prjdpfxsvz Hhxs Agpsd - Fire chamber negative pressure: 0.2–0.3 mbar - Flue draft requirement at rated output: 0.18 mbar - Heatable volume: approx. 2,500 m³ - Heatable surface: approx. 500 m² - Required space: width 800 mm, depth 1170 mm, height 2300 mm - Weight: 650 kg - Flue pipe diameter (outlet): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90 % - Chimney draft: 16 Pa - Flue gas temperature: 287 °C - Warm air outlet sockets: 2 x Ø 220 mm - For further details, please refer to the attached data sheet. The two pipe flanges for warm air discharge are located at the rear bottom of the furnace. A maximum pipe length of 20 meters is permitted per flange for air distribution.